Rayson Technology WFM210 iCOM Smart WiFi Module User Manual WFM210 DataSheet

Rayson Technology Co., Ltd. iCOM Smart WiFi Module WFM210 DataSheet

User manual

aVVUUG 1 IEEE 802.11 b/g/n 2.4GHz 1T1R User ManualiCOM Smart WiFi Module
aVVUUG 2 WFM-210 iAudio(Airplay/DLNA) (Realtek RTL8196EU+RTL8188ER) Single Module GGGGGG
aVVUUG 3 Table of Contents 1. Product Overview-----------------------------------------------------5 1.1. Extended Application-------------------------------------------------5 2. Module Parameter----------------------------------------------------6 2.1. Basic Parameter-------------------------------------------------------6 2.2. Regulation Requirements---------------------------------------------6 2.3. Environment Requirements-------------------------------------------7 2.4. RF Power Consumption-----------------------------------------------7 3. Pin Assignment on module--------------------------------------------8 4. Interface Specifications--------------------------------------------10 5. DVT Report----------------------------------------------------11 6. RF Connector----------------------------------------------------------13 7. Outline Drawing-------------------------------------------------------14 7.1 PCB outline drawing---------------------------------------------------14 7.2 shield cover outline drawing------------------------------------------15
aVVUUG 5 1. Product Overview WFM-210 Serial iAudio(Airplay/DLNA) module is a single chip wireless audio module that developed by Rayson Technology(Shenzhen) Ltd Company。 WFM-210 Serial Wi-Fi Audio module integrates multiple audio formats such as MP3, WMA, RA, AAC, WAV, APE, FLAC and Hi-Fi lossless music decoding, maximum decoding capacity up to 4.5Mbps (24bit/192kHz)，the biggest advantage in the ability for loss free streaming media transmission bandwidth and network。Also can support AIRPLAY protocol for APPLE device, support DLNA protocol for ANDROID device, support network media streaming protocol, remote control base on TCP/IP。 WFM-210 Serial Wi-Fi Audio module can also be used for constructing the wireless network security monitoring, Intelligent wireless audio, wireless intelligent household appliances。 Support 802.11 b/g/n wireless standard, which can work in wireless AP/STA mode。For the main Wi-Fi standard 802.11g and 802.11n, the transmission rate is 54Mbps for 802.11g, 150Mbps for 802.11n, all far more than the CD level quality required bandwidth。At the same time, WFM-210 can realize two device point to point direct, and also can through Wireless routing network.。 For example, Android smart mobile phone connect to music box through WFM-210 can achieve shared music between multiple mobile phone, t the same time, can also satisfy the network multicasting, browsing demand, this is the Bluetooth cannot does。 WFM-210 Serial Wi-Fi Audio module also support extended interfaces, such as Ethernet interface support cable internet access, USB interface can access USB extend storage device。 Support standard UART interface, and can be connected with MCU to achieve Wi-Fi wireless network control。 1.1 Extended Application Wireless intelligent audio Wireless intelligent portable speaker Wireless intelligent router and music player tŝƌĞůĞƐƐŚŽŵĞĞŶƚĞƌƚĂŝŶŵĞŶƚĐĞŶƚĞƌ speaker
aVVUUG6 2. Module Parameter2.1 Basic ParameterFeature Detailed Description Antenna Type IPEX compatible antenna Main chip RTL8196EU Frequency range 2.412GHz-2.484GHz CPU clock 400MHz DDR1 speed 156.25MHz DDR1 size 32MB Flash size 8MB SPI Flash PCB stack 4 layers Operating Voltage 3.3VDC +/- 10% Power Consumption 1.3W@1T1R, Operation current 136mA~187mA Form factor Half size Mini-Card 32x27x1 mm Main Interface 10/100M FE PHY Network Protocal TCP/IP/UDP/HTTP/UPNP Network Type AP/STA Other Interface USB, UART 2.2 Regulation RequirementsFeature Detailed Description United States IEEE 802.11 b/g/n FCC part 15.247, 15.205, 15.209 Safety: UL1950-3 for CSA mark Europe IEEE 802.11 b/g/n EMC: EN 300 328, EN 300 826, EN 60950 2.412GHz-2.462GHz
aVVUUG 7 2.3 Environment Requirements Feature Detailed Description Operating Temperature Conditions The product is capable of continuous reliable operation when operating in ambient temperature of 0°C to +50°C Operating Temperature Conditions Neither subassemblies is damaged nor the operational performance is degraded when restored to the operating temperature after exposing to storage temperature in the range of -20°C to +75°C Operating Humidity Conditions The product is capable of continuous reliable operation when subjected to relative humidity in the range of 10% and 90% non-condensing. Non-Operating Humidity Conditions The product is not damaged nor the performance is degraded after exposure to relative humidity range from 5% to 95% non-condensing 2.4 RF Power Consumption Test Environment : Platform : Lenovo CPU: Intel i5-3230M @2.6GHz OS: Win7 32bits Encryption: No encryption Mode 3.3V Power consumption (mA) Throughput (Mbps) Non-Associated 2 N/A Associated Idle 2~116 N/A Radio off 2 N/A Disable 2 N/A Tx n mode 40 MHz 187 93 Rx n mode 40 MHz 155 90.9 Tx n mode 20 MHz 172 48.3 Rx n mode 20 MHz 136 53.7 Tx g mode 173 30.3 Rx g mode 142 29.7 Tx b mode 160 6 Rx b mode 136 6.1
aVVUUG 8 3. Pin Assignment on module Abbreviations in used: I: Input AI: Analog Input O: Output AO: Analog Output IO: Bi-Directional Input/Output AI/O: Analog Bi-Directional Input/Output P: Digital Power G: Digital Ground PIN NAME TYPE PIN NAME TYPE 1 GND G 52 GND G 2 GPIO_A4 I/O 51 GND G 3 Ethernet_LED O 50 GND G 4 GND G 49 GND G 5 3.3V P 48 GND G 6 3.3V P 47 ANT_A(1T1R_ANT) A 7 3.3V P 46 GND G 8 GND G 45 GND G 9 UARTTRXD I 44 GPIO_0 I/O 10 UARTTTXD O 43 GPIO_4 I/O 11 GND G 42 GPIO_7 I/O 12 TXON AO 41 GND G 13 TXOP AO 40 GND G 14 GND G 39 ANT_B A 15 RXIN AI 38 GND G 16 RXIO AI 37 GND G 17 GND G 36 GND G 18 USB_DN AI/O 35 GND G 19 GND G 34 GND G 20 USB_DP AI/O 33 GND G 21 GND G 32 GND G 22 WLAN_LED O 31 GND G 23 iNIC_RST#/GPIOB5 I/O 30 GND G 24 3.3V P 29 GND G 25 3.3V P 28 GND G 26 GND G 27 GND G
aVVUUG 9
aVVUUG 10 4.Interface Specifications 1 26 27 52
aVVUUG 11 5. DVT Report Mode:11b Transceiver:A Bandwidth:20MHz Data Rate: 11Mbps             Channel Pass/Fall Y Y Y Y Y Y Y Y Y Y Y Y YCrt             *DLQ6WDJH'HF2XWSXW3RZHUG%P             >17             EVM(%)Freq. Offset(ppm)             <8 ±25 [ [ [ [ [ [ [ [ [ [ [ [ [Thermal Meter(Hex) 3$66 3$66 3$66 3$66 3$66 3$66 3$66 3$66 3$66 3$66 3$66 3$66 3$66
aVVUUG 13 6.RF Connector
Antenna Information Antenna Type: PCB Antenna Antenna Gain: 3.3dBi Manufacturer: Unictron Technology Corporation Model Number: AA107 Patent No.: US 8,106,833 B2 
aVVUUG 14 7.Outline Drawing 7.1 PCB outline drawing
aVVUUG 15 7.2 shield cover outline drawing
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Radiation Exposure Statement The modular can be installed or integrated in mobile or fix devices only. This modular cannot be installed in any portable device, for example, USB dongle like transmitters is forbidden. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This modular must be installed and operated with a minimum distance of 20 cm between the radiator and user body. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: QWOWFM210 Or Contains FCC ID: QWOWFM210 ā When the module is installed inside another device, the user manual of this device must contain below warning statements; 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The devices must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product

Navigation menu