Rayson Technology WFM210 iCOM Smart WiFi Module User Manual WFM210 DataSheet
Rayson Technology Co., Ltd. iCOM Smart WiFi Module WFM210 DataSheet
User manual
User Manual IEEE 802.11 b/g/n 2.4GHz 1T1R iCOM Smart WiFi Module ÂÂÂÂaVVÂÂÂU ÂÂÂUÂÂÂG WFM-210 iAudio(Airplay/DLNA) (Realtek RTL8196EU+RTL8188ER) Single Module ÂÂÂÂaVVÂÂÂU ÂÂÂUÂÂÂG Table of Contents 1. Product Overview-----------------------------------------------------5 1.1. Extended Application-------------------------------------------------5 2. Module Parameter----------------------------------------------------6 2.1. Basic Parameter-------------------------------------------------------6 2.2. Regulation Requirements---------------------------------------------6 2.3. Environment Requirements-------------------------------------------7 2.4. RF Power Consumption-----------------------------------------------7 3. Pin Assignment on module--------------------------------------------8 4. Interface Specifications--------------------------------------------10 5. DVT Report----------------------------------------------------11 6. RF Connector----------------------------------------------------------13 7. Outline Drawing-------------------------------------------------------14 7.1 PCB outline drawing---------------------------------------------------14 7.2 shield cover outline drawing------------------------------------------15 ÂÂÂÂaVVÂÂÂU ÂÂÂUÂÂÂG 1. Product Overview WFM-210 Serial iAudio(Airplay/DLNA) module is a single chip wireless audio module that developed by Rayson Technology(Shenzhen) Ltd Companyă WFM-210 Serial Wi-Fi Audio module integrates multiple audio formats such as MP3, WMA, RA, AAC, WAV, APE, FLAC and Hi-Fi lossless music decoding, maximum decoding capacity up to 4.5Mbps (24bit/192kHz)ďźthe biggest advantage in the ability for loss free streaming media transmission bandwidth and networkăAlso can support AIRPLAY protocol for APPLE device, support DLNA protocol for ANDROID device, support network media streaming protocol, remote control base on TCP/IPă WFM-210 Serial Wi-Fi Audio module can also be used for constructing the wireless network security monitoring, Intelligent wireless audio, wireless intelligent household appliancesă Support 802.11 b/g/n wireless standard, which can work in wireless AP/STA modeăFor the main Wi-Fi standard 802.11g and 802.11n, the transmission rate is 54Mbps for 802.11g, 150Mbps for 802.11n, all far more than the CD level quality required bandwidthăAt the same time, WFM-210 can realize two device point to point direct, and also can through Wireless routing network.ă For example, Android smart mobile phone connect to music box through WFM-210 can achieve shared music between multiple mobile phone, t the same time, can also satisfy the network multicasting, browsing demand, this is the Bluetooth cannot doesă WFM-210 Serial Wi-Fi Audio module also support extended interfaces, such as Ethernet interface support cable internet access, USB interface can access USB extend storage deviceă Support standard UART interface, and can be connected with MCU to achieve Wi-Fi wireless network controlă 1.1 Extended Application Wireless intelligent audio Wireless intelligent speaker portable speaker Wireless intelligent router and music player tĹĆÄĹŻÄĆĆĹŽžÄÄĹśĆÄĆĆÄĹŜžÄĹśĆÄÄĹśĆÄĆ ÂÂÂÂaVVÂÂÂU ÂÂÂUÂÂÂG 2. Module Parameter 2.1 Basic Parameter Feature Detailed Description Antenna Type IPEX compatible antenna Main chip RTL8196EU Frequency range 2.412GHz-2.462GHz 2.412GHz-2.484GHz CPU clock 400MHz DDR1 speed 156.25MHz DDR1 size 32MB Flash size 8MB SPI Flash PCB stack 4 layers Operating Voltage 3.3VDC +/- 10% Power Consumption 1.3W@1T1R, Operation current 136mA~187mA Form factor Half size Mini-Card 32x27x1 mm Main Interface 10/100M FE PHY Network Protocal TCP/IP/UDP/HTTP/UPNP Network Type AP/STA Other Interface USB, UART 2.2 Regulation Requirements Feature United States Detailed Description IEEE 802.11 b/g/n FCC part 15.247, 15.205, 15.209 Safety: UL1950-3 for CSA mark Europe IEEE 802.11 b/g/n EMC: EN 300 328, EN 300 826, EN 60950 ÂÂÂÂaVVÂÂÂU ÂÂÂUÂÂÂG 2.3 Environment Requirements Feature Detailed Description Operating The product is capable of continuous reliable Temperature operation when operating in ambient temperature Conditions of 0°C to +50°C Operating Neither subassemblies is damaged nor the Temperature operational performance is degraded when restored Conditions to the operating temperature after exposing to storage temperature in the range of -20°C to +75°C Operating The product is capable of continuous reliable Humidity operation when subjected to relative humidity in the Conditions range of 10% and 90% non-condensing. Non-Operating The product is not damaged nor the performance is Humidity degraded after exposure to relative humidity range Conditions from 5% to 95% non-condensing 2.4 RF Power Consumption Test Environment : Platform : Lenovo OS: Win7 32bits Mode 3.3V CPU: Intel i5-3230M @2.6GHz Encryption: No encryption Power consumption (mA) Throughput (Mbps) Non-Associated N/A Associated Idle 2~116 N/A Radio off N/A Disable N/A Tx n mode 40 MHz 187 93 Rx n mode 40 MHz 155 90.9 Tx n mode 20 MHz 172 48.3 Rx n mode 20 MHz 136 53.7 Tx g mode 173 30.3 Rx g mode 142 29.7 Tx b mode 160 Rx b mode 136 6.1 ÂÂÂÂaVVÂÂÂU ÂÂÂUÂÂÂG 3. Pin Assignment on module Abbreviations in used: I: Input AI: Analog Input O: Output IO: Bi-Directional Input/Output AO: Analog Output AI/O: Analog Bi-Directional Input/Output P: Digital Power G: Digital Ground PIN NAME TYPE PIN NAME TYPE GND 52 GND GPIO_A4 I/O 51 GND Ethernet_LED 50 GND GND 49 GND 3.3V 48 GND 3.3V 47 ANT_A(1T1R_ANT) 3.3V 46 GND GND 45 GND UARTTRXD 44 GPIO_0 I/O 10 UARTTTXD 43 GPIO_4 I/O 11 GND 42 GPIO_7 I/O 12 TXON AO 41 GND 13 TXOP AO 40 GND 14 GND 39 ANT_B 15 RXIN AI 38 GND 16 RXIO AI 37 GND 17 GND 36 GND 18 USB_DN AI/O 35 GND 19 GND 34 GND 20 USB_DP AI/O 33 GND 21 GND 32 GND 22 WLAN_LED 31 GND 23 iNIC_RST#/GPIOB5 I/O 30 GND 24 3.3V 29 GND 25 3.3V 28 GND 26 GND 27 GND ÂÂÂÂaVVÂÂÂU ÂÂÂUÂÂÂG ÂÂÂÂaVVÂÂÂU ÂÂÂUÂÂÂG 52 27 26 4.Interface Specifications ÂÂÂÂaVVÂÂÂU ÂÂÂUÂÂÂG 10 5. DVT Report Mode:11b Channel Pass/Fall *DLQ6WDJH 'HF 2XWSXW 3RZHU G%P Transceiver:A Bandwidth:20MHz Data Rate: 11Mbps Y Y Y Y Y Y Y Y Y Y Y Y Y Crt >17 EVM(%)Freq. <8 Offset(ppm) Âą25 Thermal [ [ [ [ [ [ [ [ [ [ [ [ [ Meter(Hex) 3$66 3$66 3$66 3$66 3$66 3$66 3$66 3$66 3$66 3$66 3$66 3$66 3$66 ÂÂÂÂaVVÂÂÂU ÂÂÂUÂÂÂG 11 6.RF Connector ÂÂÂÂaVVÂÂÂU ÂÂÂUÂÂÂG 13 Antenna Information Antenna Type: PCB Antenna Antenna Gain: 3.3dBi Manufacturer: Unictron Technology Corporation Model Number: AA107 Patent No.: US 8,106,833 B2 7.Outline Drawing 7.1 PCB outline drawing ÂÂÂÂaVVÂÂÂU ÂÂÂUÂÂÂG 14 7.2 shield cover outline drawing ÂÂÂÂaVVÂÂÂU ÂÂÂUÂÂÂG 15 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Radiation Exposure Statement The modular can be installed or integrated in mobile or fix devices only. This modular cannot be installed in any portable device, for example, USB dongle like transmitters is forbidden. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This modular must be installed and operated with a minimum distance of 20 cm between the radiator and user body. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: âContains Transmitter Module FCC ID: QWOWFM210 Or Contains FCC ID: QWOWFM210 Ä When the module is installed inside another device, the user manual of this device must contain below warning statements; 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The devices must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : the-o Create Date : 2014:12:04 22:25:03+08:00 Modify Date : 2014:12:04 09:31:39-05:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Producer : Acrobat Distiller 9.0.0 (Windows) Creator Tool : Bullzip PDF Printer (10.5.0.2262) Metadata Date : 2014:12:04 09:31:39-05:00 Document ID : uuid:a352d12d-5047-11e4-0000-c7ba4dcb8c31 Instance ID : uuid:1e3a2d50-b994-4178-9c5d-1d69cbdff06f Format : application/pdf Title : Microsoft Word - WFM210_DataSheet.doc Creator : the-o Page Count : 15EXIF Metadata provided by EXIF.tools