Realtek Semiconductor RTL8192SE 802.11 b/g/n RTL8192SE miniCard User Manual UserMan TX2 RTL8192SE

Download:
Mirror Download [FCC.gov]
Document ID	1302032
Application ID	iTJaPDIwvY4ZQeD6lfHgrw==
Document Description	User Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	226.77kB (2834563 bits)
Date Submitted	2010-06-25 00:00:00
Date Available	2010-06-25 00:00:00
Creation Date	2010-06-21 17:11:53
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2010-06-21 17:11:58
Document Title	UserMan_TX2-RTL8192SE.pdf
Document Creator	PScript5.dll Version 5.2
Document Author:	WendyLiao

Using Recorders
This section describes how to perform recording on a computer by using Windows
Recorder.
君#For Windows 7
君#For Windows XP
Connect a microphone to the
1 PLFURSKRQHMDFN
Connect a microphone to the
1 PLFURSKRQHMDFN
You can also use the internal MIC.
You can also use the internal MIC.
&OLFNStart > Control Panel >
2 Sounds,
Speech, and Audio
 5LJKWFOLFNRYHUWKHVolume icon
RQWKHWDVNEDUDQGVHOHFWRecording
Device.
Devices > Sounds and Audio
Devices.
 &OLFNAdvanced from Volume and
&KHFNLIWKHPLFURSKRQHLVVHWDVWKH
3 default
WKHQFOLFNOptions > Properties.
recording device.
If this is the case, it is already set as
WKHGHIDXOWGHYLFH,IQRWULJKWFOLFN
over the microphone and select Set
default.
&OLFNStart > All Programs >
4 Accessories
> Sound Recorder
DQGFOLFNStart recording to start a
recording.
81
Select Realtek HD Audio input from
 &OLFNStart > All Programs >
4 the
mixer device to select Recording
Accessories > Entertainment >
from Adjust Volume for.
Sound Recorder.
&OLFNWKHRecord button to perform
8 recording.
The default recording duration of
Windows is 60 seconds. Download
a dedicated recording program from
the Internet to record audio data for a
long time.
Select Mic Volume from Show the
5 following
volume controlsDQGFOLFN
OK.
When Recording Control window
6 DSSHDUVFKHFNWKHSelectFKHFNER[
Increase the recording volume to
increase the recording sensitivity and
close the window.
82
Wired Network
$ZLUHGQHWZRUNLVDQHWZRUNHQYLURQPHQWXVHGIRUDFRPSDQ\QHWZRUNRUEURDGEDQG
internet connection at home.
Since these descriptions are written on the basis of the latest operating system,
:LQGRZVVRPHRIWKHFRQWHQWDQGWKHÂżJXUHVRIWKHGHVFULSWLRQVPD\GLIIHU
depending on the operating system. Since the procedures for other Windows operating
systems are similar, use the computer referring to these descriptions.
Connect a LAN cable to the
1 computer’s
LAN port.
Windows 7
2 君#For
&OLFNStart > control Panel >
Network and Internet > Network
and Sharing CenterDQGFOLFN
Change adapter settings in the
left menu pane.
# 君#For Windows XP
&OLFNStart > Control Panel
> Network and Internet
Connections > Network
Connection.
83
Select Local Area Connection and
3 FOLFNWKHULJKWEXWWRQRIWKHWRXFKSDG
and select Properties.
The LAN Device name may differ
depending on your computer’s
1HWZRUN'HYLFH
# 君#For Windows XP
&OLFNGeneral tab and select a LAN
driver from Connect using:. Select
Internet Protocol(TCP/IP)DQGFOLFN
Properties.
Windows 7
4 君#For
Select Internet Protocol Version
4 (TCP/IPv4) from the Networking
WDEDQGFOLFNProperties.
z The displayed LAN driver may
vary depending on the LAN device
type.
z&OLFNInstallWRDGGDQHWZRUN
FRPSRQHQWDVVKRZQLQWKHÂżJXUH
below: You can add a client, a
service, or a protocol.
84
&RQÂżJXUH,3VHWWLQJV
5 Select
Obtain an IP address
8VLQJERWK'+&3DQGDÂż[HG,3
simultaneously
automatically when using DHCP. If
you use a static IP, select Use the
following IP address and enter the
values.
Using the $OWHUQDWH&RQÂżJXUDWLRQ
provided by Windows, you can set both
DXWRPDWLFDQGÂż[HG,3DGGUHVVHVDQG
then you can select to use either of them
to connect to the Internet.
Windows 7
1 君 For
&OLFNStart > Control Panel >
Network and Internet > Network
and Sharing CenterDQGFOLFNRQ
Change adapter settings in the
left menu pane.
君 For Windows XP
&OLFNStart > Control Panel
> Network and Internet
Connections > Network
Connection > Local Area
Connection by using the right
EXWWRQRIWKHWRXFKSDGDQGFOLFN
Properties.
If the IP of your computer is not
automatically assigned, contact the
QHWZRUNDGPLQLVWUDWRU
5LJKWFOLFNRYHUWKHLocal Area
2 Connection
and select Properties.
,IDOOVHWWLQJVDUHPDGHFOLFNOK. Now
6 WKHQHWZRUNFRQÂżJXUDWLRQLVÂżQLVKHG
85
For Windows 7, select Internet
3 Protocol
Version 4 (TCP/IPv4)
from the Networking tab and select
Properties.
For Windows XP, select Internet
Protocol (TCP/IP)DQGFOLFN
Properties.
Select the $OWHUQDWH&RQÂżJXUDWLRQ
4 tab,
select 8VHUFRQÂżJXUHGÂżOOLQWKH
FRUUHVSRQGLQJÂżHOGVDQGFOLFNWKHOK
button.
86
Wireless Network (Optional)
$ZLUHOHVVQHWZRUNDOORZVFRPSXWHUVWRVKDUHUHVRXUFHVRUDQLQWHUQHWFRQQHFWLRQ
without using LAN cables between them.
z This description is applied only to the models equipped with wireless LAN cards or
devices.
z Some of the pictures shown in this description may vary depending on the wireless
LAN device.
z To use wireless LAN, you have to turn the wireless LAN device on.
Press the Fn +
NH\FRPELQDWLRQWRRSHQWKH:LUHOHVV2Q2IIZLQGRZDQGVHW
the Wireless LAN item to On.
What is Access Point (AP)?
$3LVDQHWZRUNGHYLFHWKDWFRQQHFWVZLUHG/$1WRZLUHOHVV/$1DQGFRUUHVSRQGVWR
WKHZLUHOHVVKXERIDZLUHGQHWZRUN$OVR$3DOORZV\RXWRFRQQHFWPRUHWKDQRQH
computer where wireless LAN is enabled.
Connecting to Wireless LAN
If there is an AP, you can connect to the Internet via the AP using the Wireless LAN
connection method provided by Windows.
Some processes may differ depending on the operating system version. Moreover, the
provided images may differ from the actual screen images.
87
&OLFNConnect.
2 ,IDQHWZRUNNH\LVVHWIRUWKH$3
君#For Windows 7
Connections
1 ,I\RXFOLFNWKHNetwork
icon in the system tray, a list of
HQWHUWKHQHWZRUNNH\DQGWKHQFOLFN
Connect.
available APs appears. If you select
an AP to connect to, the Connect
button appears.
AP List
)RUWKHQHWZRUNNH\SOHDVHDVN\RXU
QHWZRUNDGPLQLVWUDWRU
When Connected to the AP is
3 GLVSOD\HGFOLFNWKHClose
button.

All Programs > Samsung
,IWKHFRQQHFWHGFRPSXWHUDQG79
DUHVKRZQLQWKHSURJUDPZLQGRZ
WKHQHWZRUNVHWWLQJVKDYHEHHQ
FRQÂżJXUHGVXFFHVVIXOO\
&RQÂżJXUHWKH,3DGGUHVVVHWWLQJVIRU
2 \RXUFRPSXWHUDQG79
 Network
z)RUPRUHLQIRUPDWLRQRQKRZWR
FRQÂżJXUHWKH,3DGGUHVVIRU\RXU
79UHIHUWRWKHXVHUPDQXDORI
\RXU79
Devices that can share content
,IDFRQQHFWHGGHYLFHLVQRW
GLVSOD\HGUHIHUWRChapter 4.
Troubleshooting > Q&A > Easy
Content Share Related
91
The selected folder is added to the
3 shared
list.
Adding shared content on your
computer
$GGWKHYLGHRVSKRWRVDQGPXVLFÂżOHV
that you want to play on your TV as
shared items.
You can only play shared items on your
TV.
&OLFNSettings
at the top right of
1 Easy
Content Share.
computer > Add Folder
2 &OLFNMy
. The Browse For Folder window
Playing content on your TV
using your computer
appears. Select a folder to share and
FOLFNOK.
After you have set photos, videos and
PXVLFÂżOHVDVVKDUHGLWHPV\RXFDQSOD\
them on your TV using your computer.
In Easy Content Share, select the
1 TV
you want to use to play content.
Playlist
Play control panel
Add content to play
92
Select the item you want to play in the
2 SOD\OLVWDQGWKHQFOLFNPlay
$GGLQJDYLGHRSKRWRRUPXVLFÂżOH
to the playlist
7KHVHOHFWHGÂżOHLVSOD\HGRQWKH79
 &OLFNAdd Content
in the Playlist
3 Using
screen. The shared content list is
the Play Control panel, you can
displayed.
control the item being played on the
TV.
4 7RVWRSSOD\LQJFOLFNStop
,QWKHVKDUHGFRQWHQWOLVWFKHFNWKH
2 FKHFNER[LQIURQWRIWKHLWHP\RXZDQW
WRDGGWRWKHSOD\OLVWDQGWKHQFOLFN
Add to playlist
Easy Content Share does not
support subtitles due to DLNA
constraints.
To use subtitles, refer to Chapter 4.
Troubleshooting > Q&A > Easy
Content Share Related.
Add the selected
item to the playlist
Return to the
playlist screen
Shared content list
&OLFNReturn to playlist screen
3 ,QWKHSOD\OLVWVFUHHQ\RXFDQÂżQGWKDW
the selected item has been added to
the playlist.
93
Playing the content stored on a computer when
Easy Content Share is not installed
 All Programs >
1 Windows
Media Player.
If the selected folder contains two
or more types of content, you must
FOLFNHDFKFRUUHVSRQGLQJPHQXLWHP
(Videos, Photos or Music) to register
each type of content.
 &OLFNStreamDQGFKHFNWKH
Automatically allow devices to play
my media... menu item.
&OLFNStart > All Programs >
3 Accessories
> Windows Explorer.
5LJKWFOLFNWKHIROGHUWRVKDUH)URP
4 the
menu displayed, point to Include in
library.
94
In the Media SharingZLQGRZFOLFN
3 Settings....
The Media Sharing -
君 For Windows Media Player 11
&OLFNStart > All Programs >
1 Windows
Media Player.
Default Settings window is displayed.
&KHFNWKHAllow new devices and
computers automatically (not
recommended)FKHFNER[
$SRSXSZLQGRZLVGLVSOD\HG&OLFN
Yes7KHQFOLFNOK in the Media
Sharing- Default Settings window
and in the Media Sharing window.
&OLFNLibrary > Media Sharing.
2 The
Media Sharing window is
GLVSOD\HG&KHFNWKHShare my
mediaFKHFNER[DQGWKHQFOLFNOK.
$IWHUWKHUHJLVWUDWLRQKDVEHHQÂżQLVKHG
\RXFDQÂżQGWKHDGGHGIROGHULVOLVWHGLQ
the shared content list of Easy Content
Share.
95
For a shared content item, the name of
the computer where the item is stored
is displayed next to it, allowing you to
identify the computer. This is useful when
multiple computers are providing content.
A folder added as
a shared item
The name of the
PC where the
content is stored
Content sharing is only available with
Windows Media Player 11 or later.
If your Windows Media Player is
earlier than Windows Media Player
11, download and install Windows
Media Player 11 or later from the
Microsoft website.
96
HDD Protection Function (Optional)
This function protects the HDD from external impacts while operating by using the 3axis sensor that detects inclinations, movement and vibrations.
This function is only provided for models that are shipped from the factory with this
function.
7KURXJKWKHLFRQFRORUVWKH+''SURWHFWLRQVWDWXVFDQEHLGHQWLÂżHG.
Setting a Supervisor Password
A Supervisor Password is required to turn
the computer on or to start the System
Setup.
When setting a Supervisor Password,
users other than supervisors cannot use
the computer.
XXXXXXXX
Select the Security menu in the BIOS
1 Setup.
105
Enter a password, press , re3 HQWHUWKHSDVVZRUGIRUFRQÂżUPDWLRQ
Setting a User Password
The User Password restricts access
WRWKHFRPSXWHURUIRUFRQÂżJXULQJWKH
%,266HWXSOLNHD6XSHUYLVRU3DVVZRUG
However, the Setup items that can
EHFRQÂżJXUHGZLWKD8VHU3DVVZRUG
DUHUHVWULFWHGXQOLNHIRUD6XSHUYLVRU
Password.
%HIRUHFRQÂżJXULQJDXVHUSDVVZRUGD
supervisor password must have been
FRQÂżJXUHG'HDFWLYDWLQJWKHVXSHUYLVRU
password also deactivates the user
password.
In the Set User Password item, press
 and complete the procedures
from Step 3 of Setting a Supervisor
Password.
and press  again.
The password can be up to 8
alphanumeric characters. Special
characters are not allowed.
:KHQDPHVVDJHFRQÂżUPLQJWKH
4 SDVVZRUGFRQÂżJXUDWLRQDSSHDUVLQ
the Setup Notice window, press
.
The supervisor password has been
set.
The supervisor password is required
to turn the computer on or to enter the
BIOS Setup.
Setting Up a Boot Password
To setup a boot password, the
administrator password (Set Supervisor
Password) should be set in advance.
Set the Password on boot item to
Enabled.
Once a boot password is set, you have
to enter the password to boot up the
computer.
106
Setting up a Hard Disk Drive
Password (Optional)
Deactivating the Password
A supervisor password must be set using
the Set Supervisor Password menu.
,I\RXVHWDSDVVZRUGIRUDKDUGGLVN
drive, it cannot be accessed from another
computer.
Press  in the Set HDD
PasswordLWHPDQGGHÂżQHDSDVVZRUGDV
described in Step 3 of the Setting up the
Supervisor Password.
 on the password
1 toPress
be deactivated. For example, to
deactivate a supervisor password in
the Set Supervisor Password item,
press .
In the Enter Current Password
2 LWHPHQWHUWKHFXUUHQWO\FRQÂżJXUHG
password and press .
7KHKDUGGLVNGULYHSDVVZRUGVHWWLQJ
function is not provided for some
models.
Leave the Enter New Password item
3 ÂżHOGHPSW\DQGSUHVVEnter>.
Changing the hard disk drive
password
For security purposes, you can only
FKDQJHDKDUGGLVNGULYHSDVVZRUG
after restarting the computer by
pressing the computer Power button.
If you cannot change the hard
GLVNGULYHSDVVZRUGRUWKHHDD
Password Frozen message appears
when entering the BIOS Setup
and selecting Security > HDD
Password, press the Power button
to turn the computer on again.
Leave the &RQÂżUP1HZ3DVVZRUG
4 ÂżHOGHPSW\DQGSUHVVEnter>.
In the Setup Notice window, press
5 .
The password is deactivated.
107
Changing the Boot Priority
7KLVFRPSXWHULVFRQÂżJXUHGWRERRWIURPDQH[WHUQDOW\SH2''ÂżUVW
This chapter describes how to change the boot priority so that the computer boots from
WKHKDUGGLVNGULYHÂżUVW
Select the Boot menu in the BIOS
1 Setup.
3UHVVWKHGRZQNH\ Äť WRPRYHWRWKH
3 IDE
HDD item and press the F6NH\
to move the item to the top.
Press  on the Boot Device
2 Priority
item.
Boot Device Priority
[Boot priority order]
1. USB CD
: N/A
2. IDE HDD : XXXXXXXX
3. PCI BEV
: N/A
4. USB FDD : N/A
5. USB KEY : N/A
6. USB HDD : XXXXXXXX
7.
8.
XXXXXXXX
Boot Device Priority
NumLock
Enable Keypad
Summary Screen
Boot-time Diagnostic Screen
Brightness Mode Control
Wireless Device Control
[Off]
[By NumLock]
[Disabled]
[Disabled]
[Auto]
[Always On]
Powersave Mode
[Enabled]
[Excluded from boot order]
- USB ZIP
: N/A
- USB LS120 : N/A
- PCI SCSI
: N/A
- Other USB : N/A
- PCI
: N/A
Smart Battery Calibration
Press the F10NH\WRVDYHWKHVHWWLQJV
4 and
exit Setup.
The highest boot priority device is
now set to the Hard Drive.
108
Upgrading Memory
A memory is installed in the memory slot at the bottom of this computer. The
procedures to replace the memory are described below.
z Replace new memory only after shutting the computer down completely. Do not
replace memory when the computer is in Sleep mode.
z Disconnect main power plug and remove the battery before continuing.
z2QO\XVHWKHVDPHW\SHRIPHPRU\DVVSHFLÂżHGLQWKH3URGXFW6SHFLÂżFDWLRQ
z7KHPHPRU\FRPSDUWPHQWFRYHUPD\GLIIHUIURPWKHÂżJXUHEHORZ
Pull the memory module latches
2 outward.
The memory module will pop
Replacing the Memory
up.
Remove the memory module out at
an angle of 30 degrees.
Remove the screw on the memory
compartment cover at the bottom of
the computer using a screw driver.
Fixing Screw
109
Insert a new memory module into
3 the
memory slot at an angle of
Push the memory module down
4 VRWKDWLWLVFRPSOHWHO\Âż[HG,IWKH
PHPRU\GRHVQRWÂżWHDVLO\SXVKWKH
memory module down while pulling
the memory module latches outward.
approximately 30 degrees aligning it
to the angle of the memory slot.
Memory Slot
Close the memory compartment
5 cover
and fasten the screw.
110
Battery
Please refer to the following instructions when running the computer on battery power
without connecting the AC power.
A Lithium-Ion smart battery is supplied with this computer.
Carefully read and follow the precautions printed on the battery before using the
battery.
Precautions
z8VHRQO\FKDUJHUVVSHFLÂżHGLQWKH8VHU0DQXDO
z1HYHUKHDWWKHEDWWHU\SDFNSXWLWQHDURULQDÂżUHRUXVHDWDWHPSHUDWXUHKLJKHU
WKDQƒ&DVWKLVPD\FDXVH¿UH
z1HYHUFDXVHDVKRUWFLUFXLWEHWZHHQWKHEDWWHU\SDFNWHUPLQDOVRUGLVDVVHPEOHWKH
EDWWHU\SDFN
z Carefully read and follow the precautions printed on the battery and the safety
instructions in the User Manual before using the battery.
z Please refer to the system operation environment of this manual and operate and
store the battery at room temperature.
Installing/Removing the Battery
Shutdown the system, close the LCD panel and place the computer upside down on
1 DÀDWVXUIDFH
111
battery latches outwards
2 Pull,thethentworemove
the battery.
Charging the Battery
Attach the battery and connect the
1 $&DGDSWHUWRWKH'&LQMDFNRIWKH
computer.
The battery will then start charging.
When charging is complete, the
2 Charge
LED turns green.
To install the battery again, slide the
battery into the system.
The battery latches move inwards and
Âż[WKHEDWWHU\DXWRPDWLFDOO\
&KHFNLIWKHEDWWHU\ODWFKKDVEHHQ
moved inwards.
112
Status
Charge LED
Charging
Amber
Charging complete
Green
AC adapter not
connected
Off
Measuring the Remaining Battery Charge
You can view the battery charge status by completing the following procedures.
&RQÂżUPLQJWKHEDWWHU\FKDUJHLQ
the Taskbar
To use the shortcut key to view
Press the Fn +
NH\VRQWKH
NH\ERDUG7KHUHPDLQLQJEDWWHU\FKDUJH
(%) will displayed for a moment.
You can only view the charge status in
this way when Easy Display Manager is
installed on your computer.
Disconnect the AC adapter and move the
mouse cursor over the battery icon in the
V\VWHPWUD\RIWKH7DVNEDUWRFRQÂżUPWKH
remaining battery charge.
Battery Warning
If the battery residual amount is
3~5%, the computer automatically
shuts down after saving the data.
The battery residual amount may
vary depending on the computer
model.
Battery Lifetime Information
A battery is an expendable supply,
so when using it over a long time, the
capacity/battery life is shortened. If the
battery life is reduced to under half of its
initial time, we recommend purchasing a
new battery.
When not using the battery for a long
time, store the battery after charging it to
30-40% of its capacity. This extends the
battery life time.
113
Extending the Battery Usage Time
Decreasing the LCD Brightness
Using the Battery Calibration
Function
Press the Fn +
NH\VRQWKHNH\ERDUG
to decrease the LCD brightness to extend
the battery usage time.
If you turn off unused devices, battery
usage time will improve.
When charging/discharging the battery
repeatedly for a short time only, the
battery usage time may be reduced by
the difference between the actual battery
charge and the remaining charge display.
In this case, the actual battery charge
and the remaining charge display will
be the same by discharging the battery
completely using the Battery Calibration
function, and then recharging it again.
Disconnect the AC power adapter
1 after
turning off the computer.
Disabling Unused Devices
(Only for Windows XP)
 &OLFN'HYLFH0DQDJHUIURPStart
> Control Panel > Performance
and Maintenance > Systems >
Hardware tab.
Restart your computer and press the
2 F2
button when the Samsung logo
appears, to start the BIOS Setup.
 5LJKWFOLFNWKHGHYLFHVWKDW\RXDUH
not using and select Disable.
114
Move to the Boot > Smart Battery
3 Calibration
item using the direction
NH\VDQGSUHVVEnter>.
XXXXXXXX
Boot Device Priority
NumLock
Enable Keypad
Summary Screen
Boot-time Diagnostic Screen
Brightness Mode Control
Wireless Device Control
[Off]
[By NumLock]
[Disabled]
[Disabled]
[Auto]
[Always On]
Powersave Mode
[Enabled]
Smart Battery Calibration
Highlight Yes in the Battery
4 &DOLEUDWLRQ&RQÂżUPDWLRQ
window
and press .
The Battery Calibration function is
activated and the battery is forcefully
discharged. To stop the operation,
press the  button.
This operation requires 3~5 hours
depending on the battery capacity
and the remaining battery charge.
115
Using the Security Lock Port
 All Programs >
Samsung > Samsung Recovery
Solution > Samsung Recovery
Solution.
– When Windows does not start:
Turn the computer on and press
the F4NH\ZKHQWKHERRWVFUHHQ
(SAMSUNG logo) appears. After a
moment, the computer boots up in
Restoration mode and the Samsung
Recovery Solution screen appears.
,I\RXFOLFNSelect by Symptom,
the Select by Symptom menu
appears. If you select a symptom, a
recommended restoration option will
EOLQN&OLFNWKHUHVWRUDWLRQRSWLRQWR
continue.
Select either Basic Restore or
3 Complete
Restore from the Restore
For computers supporting the touch
screen function, the touch screen
IXQFWLRQGRHVQRWZRUNGXULQJ
Restore Mode. In this case, please
use the touchpad or mouse.
menu.
z A Basic Restore restores the major
:LQGRZVÂżOHVRQO\ZKLOHPDLQWDLQLQJ
WKHXVHUFRQÂżJXUDWLRQDQGGDWDRQWKH
C drive in a short time.
z A Complete Restore deletes the
entire C drive and then restores the
contents of the C drive.
123
Run Complete Restore if the
FRPSXWHUGRHVQRWZRUNHYHQDIWHU
Basic Restore has been completed.
In the Advanced menu, you can
change the size of the hard drive
partitions (e.g. C: and D:).
z0DNHVXUHWREDFNXS\RXUGDWD
in advance, as all data will be
deleted after the partition size is
changed.
z The functions of the Advanced
menu are not available in products
with the HyperSpace function
(restriction).
z The Advanced menu is only
activated when the computer
boots up in the restoration area.
(by pressing the F4NH\GXULQJWKH
booting sequence.)
3-1 If you have selected Basic Restore:
,QWKH%DVLF5HVWRUHVFUHHQFOLFN
the Next button. The system will be
restarted.
3-2 If you have selected Complete
Restore:
In the restoration point selection
screen, select the restoration point
described as ‘Computer Initial Status’
DQGFOLFNWKHNext button. The system
will be restarted.
Since a Complete Restore deletes
all user data as well as additionally
LQVWDOOHGSURJUDPVSOHDVHEDFNXS
\RXULPSRUWDQWGDWDÂżUVWXVLQJWKH
'DWD%DFNXSIXQFWLRQEHIRUHUXQQLQJ
Complete Restore.
If the Samsung Recovery Solution
4 SURJUDPLVODXQFKHGIRUWKHÂżUVWWLPH
after purchasing the computer, the
license agreement screen appears
before the restoration is started. Read
WKHDJUHHPHQWDQGFOLFNAgree to
continue.
124
The computer boots up into
5 restoration
mode and the restoration
Backup Function
progress message appears. If you
FOLFNOK, the restoration begins. The
UHVWRUDWLRQPD\WDNHVRPHWLPH
please wait for a moment.
Complete Backup/Restore
A Complete Backup saves the complete
image of the C drive onto another drive or
DVD. A Complete Restore restores the
LPDJHÂżOHVDYHGE\WKH&RPSOHWH%DFNXS
onto the C drive.
When the ‘Restart the System’
6 message
appears after the restoration
LVFRPSOHWHFOLFNOK to restart the
system.
} Complete Backup
0DNHVXUHWKDWWKHSRZHUFRUGLV
connected while the restoration is in
SURFHVV7KHÂżUVWWLPHWKHFRPSXWHU
boots up after a Complete Restore
has been performed, the speed of
the boot process may be slowed
down due to the system optimization
process. At this time, do not shut the
computer down by force.
,I\RXUXQ&RPSOHWH%DFNXSXVLQJD
DVD, you can restore the computer
even when a problem occurs with
WKHKDUGGLVNRUZKHQWKHUHVWRUDWLRQ
area is removed.
&OLFNStart > All Programs >
1 Samsung
> Samsung Recovery
Solution > Samsung Recovery
Solution.
When the initial menu screen
2 DSSHDUVFOLFNBackup.
&OLFNComplete Backup in the
3 EDFNXSPHQX
125
(QWHUDGHVFULSWLRQIRUWKHEDFNXS
 ,I\RXFOLFNWKHNext button, the
4 regarding
the current computer status
system restarts in restoration mode
LQWKH'HVFULSWLRQÂżHOGVRWKDW\RXFDQ
easily recognize it later, and specify
the Save Path. If your computer has a
DVD-Writer, you can specify the DVD
drive as the Save Path.
and the Complete Backup begins.
If you have selected the DVD drive
DVWKH6DYH3DWKWKHÂł,QVHUWDEODQN
DVD” message appears. Insert a
EODQN'9'DQGFOLFNWKHOK button.
Samsung Recovery Solution
supports DVD+R, DVD-R, DVD+RW,
and DVD-RW, but does not support
CD-R, CD-RW, DVD-RAM, DVD-DL
(Dual Layer), HD-DVD, and Blu-Ray.
Select Drive D.
Select the DVD drive.
126
6 If7KH&RPSOHWH%DFNXSEHJLQV
multiple DVDs are required,
} Complete Restore
When backing up onto DVD
1 – Turn
the computer on and insert the
the expected number of DVDs is
displayed in the progress screen.
Whenever burning a DVD is
completed, the “Insert the next DVD”
message will appear. Continue the
EDFNXSDFFRUGLQJWRWKHLQVWUXFWLRQV
EDFNXS'9'LQWRWKH'9'GULYH
,IWKHUHDUHPXOWLSOHEDFNXS'9'V
LQVHUWWKHÂżUVW'9'
– When backing up to another
drive
Proceed to Step 2.
&OLFNStart > All Programs >
2 Samsung
> Samsung Recovery
Solution > Samsung Recovery
Solution.
When you cannot start Windows,
turn the computer on and press the
F4NH\LQWKHERRWVFUHHQWRHQWHU
restoration mode.
When the ‘Restart the System’
7 PHVVDJHDSSHDUVDIWHUWKHEDFNXS
When the initial menu screen
3 DSSHDUVFOLFNRestoreDQGWKHQFOLFN
LVFRPSOHWHFOLFNOK to restart the
system.
Complete Restore.
127
Select a Complete Backup
4 restoration
point in the restoration
Data Backup/Restore
SRLQWVHOHFWLRQVFUHHQDQGFOLFNWKH
Next button. The system is restarted.
Data Backup enables you to save
VSHFLÂżFÂżOHVRUIROGHUVRQWRDQRWKHUGULYH
or DVD. Data Restore enables you to
restore data using the data saved by
D'DWD%DFNXSZKHQGDWDLVORVW7KLV
JXLGHGHVFULEHVWKH%DFNXSDQG5HVWRUH
SURFHGXUHVRQWKHEDVLVRIEDFNLQJXS
and restoring by using DVD.
} Data Backup
&OLFNStart > All Programs >
1 Samsung
> Samsung Recovery
Solution > Samsung Recovery
Solution.
The restoration progress message
5 appears
after the computer boots up
When you cannot start Windows,
turn the computer on and press the
F4NH\LQWKHERRWVFUHHQWRHQWHU
restoration mode.
LQUHVWRUDWLRQPRGH,I\RXFOLFNOK,
the restoration begins.
If multiple DVDs have been used
IRUD&RPSOHWH%DFNXSZKHQHYHU
burning a DVD is completed, the
“Insert the next DVD” message will
appear.
When the initial menu screen
2 DSSHDUVFOLFNBackupDQGWKHQFOLFN
Data Backup.
When the ‘Restart the System’
In the data selection screen, select
6 message
appears after the restoration
either Basic Selection or Select
LVFRPSOHWHFOLFNOK to restart the
system. The Complete Restore has
been completed.
from allVHOHFWDIROGHURUÂżOHWREH
EDFNHGXSDQGWKHQFOLFNWKHNext
button.
128
(QWHUDGHVFULSWLRQIRUWKHEDFNXSLQ
 ,I\RXFOLFNWKHNext button, the Data
4 the
DescriptionÂżHOGVRWKDW\RXFDQ
%DFNXSEHJLQV,I\RXKDYHVHOHFWHG
easily recognize it later and specify
the Save Path. If your computer has a
DVD-Writer, you can specify the DVD
drive as the Save Path.
the DVD drive as the Save Path,
WKH³,QVHUWDEODQN'9'´PHVVDJH
DSSHDUV,QVHUWDEODQN'9'DQGFOLFN
the OK button.
7KH³%DFNXSLVFRPSOHWHG´PHVVDJH
6 appears.
} Data Restore
When backing up onto DVD
1 – Turn
the computer on and insert the
EDFNXS'9'LQWRWKH'9'GULYH
Select Drive D.
Select the DVD drive.
– When backing up to another
drive
Proceed to Step 2.
&OLFNStart > All Programs >
2 Samsung
> Samsung Recovery
,I\RXKDYHVSHFLÂżHGDKDUGGLVN
GULYHRUDUHPRYDEOHGLVNDVWKH
Save Path, the SamsungRecovery\
SamsungData folder is created on
WKHFRUUHVSRQGLQJGULYH HJ'? 
and the data is saved to the folder.
7DNHFDUHWRQRWGHOHWHWKHIROGHUE\
PLVWDNHRURQSXUSRVH
Solution > Samsung Recovery
Solution.
When you cannot start Windows,
turn the computer on and press the
F4NH\LQWKHERRWVFUHHQWRHQWHU
restoration mode.
129
When the initial menu screen
3 DSSHDUVFOLFNRestoreDQGWKHQFOLFN
System Software Function
Data Restore.
Using System Software
 6HOHFWDEDFNXSLWHPWREHUHVWRUHG
LQWKHEDFNXSOLVWDQGFOLFNWKHNext
button.
The System Software function is a
function that enables you to reinstall
device drivers and System Software
3URJUDPVRUEDFNXSWKRVHSURJUDPV
The system software function is
supported by Samsung Recovery
Solution version 4 or later.
Therefore, the function may not be
supported depending on the version.
The System Software Installation
)XQFWLRQRQO\ZRUNVLQ0LFURVRIW
Windows.
} Installing System Software
Select a folder for the restoration and
FOLFNWKHNext button. Data Restore
begins.
&OLFNStart > All Programs >
1 Samsung
> Samsung Recovery
When Data Restore is completed,
6 FKHFNLIWKHGDWDKDVEHHQUHVWRUHGWR
WKHVSHFLÂżHGIROGHU
130
Solution > Samsung Recovery
Solution.
When the initial menu screen
2 DSSHDUVFOLFNSystem
Software >
} System Software Backup
&OLFNStart > All Programs >
1 Samsung
> Samsung Recovery
System Software Installation.
Solution > Samsung Recovery
Solution.
When the initial menu screen
2 DSSHDUVFOLFNSystem
Software >
System Software Backup.
Specify the Save Path. If your
3 computer
has a DVD-Writer, you can
specify the DVD drive as the Save
Path.
When the Samsung System
3 SoftwareVFUHHQDSSHDUVFKHFNDOO
the device drivers and application
programs you want to install and then
FOLFNInstall Now.
After the installation is complete, the
4 computer
will restart.
Select Drive D.
Select the DVD drive.
131
,I\RXKDYHVSHFLÂżHGDKDUGGLVN
GULYHRUDUHPRYDEOHGLVNDVWKH
Save Path, the SamsungSoftware
folder is created on the
FRUUHVSRQGLQJGULYH HJ'? DQGWKH
system software programs are saved
WRWKDWIROGHU7DNHFDUHWRQRWGHOHWH
the folder.
,I\RXFOLFNWKHNext button, the
4 6RIWZDUH%DFNXSEHJLQV,I\RX
have selected the DVD drive as the
6DYH3DWKWKH³,QVHUWDEODQN'9'´
PHVVDJHDSSHDUV,QVHUWDEODQN'9'
DQGFOLFNWKHOK button.
$IWHUWKHEDFNXSWKH“System
5 Software
Backup is completed”
message appears.
z If you want to install the
System Software Programs
EDFNHGXSRQWKHGULYHUXQWKH
SoftwareMediaXX.exeÂżOHLQWKH
SystemSoftware folder.
z When installing System Software
3URJUDPVIURPWKHEDFNHGXS
DVD, insert the DVD and follow
the System Software Installation
directions.
z To delete Samsung Recovery
Solution, refer to the Help section
of the program.
132
Reinstalling Windows 7
(For Windows 7. For supported models only)
You can reinstall Windows using the SYSTEM RECOVERY MEDIA for Windows
ZKHQ:LQGRZVLVQRORQJHUZRUNLQJSURSHUO\ )RUPRGHOVVXSSOLHGZLWKD6<67(0
RECOVERY MEDIA.)
For models supplied with the Samsung Recovery Solution, you can reinstall Windows
using the Samsung Recovery Solution.
These descriptions are for Windows 7 and for supported models only.
z A SYSTEM RECOVERY MEDIA may not be supplied depending on your computer
model.
z If you cannot start Windows, or if you want to delete all existing data and reinstall
Windows, install Windows according to the descriptions in [Reinstalling when
Windows does not start].
z To reinstall Windows using SYSTEM RECOVERY MEDIA, an external-type ODD
must be connected before turning the computer on. The following descriptions
assume that an external ODD is connected.
5HLQVWDOOLQJ:LQGRZVPD\GHOHWHGDWD ÂżOHVDQGSURJUDPV VDYHGRQWKHKDUGGLVN
GULYH0DNHVXUHWREDFNXSDOOLPSRUWDQWGDWD6DPVXQJ(OHFWURQLFVVKDOOQRWEHKHOG
liable for any loss of data.
Reinstalling in Windows
Insert the SYSTEM RECOVERY
1 MEDIA
into the DVD drive.
When the AutoPlay window appears,
2 select
Run setup.exeDQGFOLFN
Allow.
This screen may not appear
depending on the security level.
133
If the Select Windows Installation
3 ZLQGRZDSSHDUVFOLFNInstall
Now.
If the User Agreement screen
4 appears,
select I accept the license
When the Select Update window
DSSHDUVFOLFNRQWKHUHOHYDQWLWHP
termsDQGWKHQFOLFNNext.
For Windows 7, this screen may not
appear depending on the version.
The following window appears, select
5 an
installation option.
Windows 7 installation
selection window
z If you select Go online to get the
latest updates for installation
in the Select Update window, the
latest updates are installed and
Step 4 follows. At this time, the
computer must be connected to
the Internet.
,I\RXFOLFNCustom, the procedures
from Step 6 continue sequentially.
,I\RXFOLFNUpgrade, the procedures
from Step 7 continue sequentially.
z)RU:LQGRZVWKHVFUHHQDVNLQJ
for the operating system to be
installed may appear depending
RQWKHYHUVLRQ,I\RXFOLFNWKH
Next button, the screen of Step 4
appears.
For Windows 7, this screen may not
appear depending on the version.
134
When previous Windows installation
ÂżOHVDUHLQWKHVHOHFWHGSDUWLWLRQD
message appears informing you that
WKHÂżOHVDQGIROGHUVZLOOEHPRYHGWR
WKH:LQGRZVROGIROGHU&OLFNWKHOK
button.
z Custom
Select this option to Reinstall
Windows. You have to
reinstall all necessary device
drivers and programs after the
Custom installation. In addition,
XQQHFHVVDU\IROGHUVDQGÂżOHVPD\
UHPDLQRQWKHKDUGGLVNGULYHV
DIWHUWKHLQVWDOODWLRQ HJ&?
Windows.old, etc.).
The Windows installation continues.
7 The
computer will restart 3 times
during the installation. If the Press
any key to boot from CD or DVD...
message appears after a restart, do
not press any button.
z Upgrade
Select this option to Upgrade
Windows while maintaining
FXUUHQWÂżOHVFRQÂżJXUDWLRQVDQG
programs. Although you therefore
do not need to reinstall the device
drivers and programs, some
SURJUDPVPD\QRWZRUNSURSHUO\
after the upgrade.
Register a user according to the
8 instructions
on the Windows screen.
When the registration is complete, the
9 :LQGRZV'HVNWRSVFUHHQDSSHDUV
:KHQDZLQGRZDSSHDUVDVNLQJIRU
6 the
location to install the operating
V\VWHPWRVHOHFWDGLVNGULYHSDUWLWLRQ
DQGFOLFNWKHNext button.
For a smooth computer operation,
installing the necessary software
installation is recommended.
Drive D includes an area to save the
EDFNXSLPDJHXVHGE\6DPVXQJ
Recovery Solution. Installing
Windows to drive C is recommended.
135
Reinstalling when Windows does
not start
When Windows does not start, boot up
with the SYSTEM RECOVERY MEDIA
and from there you can reinstall Windows.
)RU:LQGRZVWKHVFUHHQDVNLQJIRU
the operating system to be installed
may appear depending on the
YHUVLRQ,I\RXFOLFNWKHNext button,
the screen of Step 5 appears.
If the User Agreement screen
5 appears,
select I accept the license
Insert the SYSTEM RECOVERY
1 MEDIA
into the DVD drive and restart
terms andWKHQFOLFNNext.
the computer.
For Windows 7, this screen may not
appear depending on the version.
If the Press any key to boot from
2 CD
or DVD... message appears
ZKLOHERRWLQJSUHVVDQ\NH\RQWKH
NH\ERDUG
:KHQWKHZLQGRZDVNLQJIRUWKH
6 LQVWDOODWLRQW\SHDSSHDUVFOLFN
Custom.
For Windows 7, this screen may not
appear depending on the version.
After a while, the Options windows
3 such
as Language, Time, Keyboard,
:KHQDZLQGRZDSSHDUVDVNLQJIRU
7 the
location to install the operating
HWFDSSHDU&RQÂżUPWKHVHWWLQJVDQG
FOLFNWKHNext button.
system to, select the partition of the
GLVNGULYHDQGWKHQFOLFNWKHNext
button.
If the Select Windows Installation
4 ZLQGRZDSSHDUVFOLFNInstall
Now.
Drive D includes an area to save the
EDFNXSLPDJHXVHGE\6DPVXQJ
Recovery Solution. Installing
Windows to drive C is recommended.
136
z$,I\RXFOLFNDrive Options
(Advanced), you can delete,
format, create or expand a
SDUWLWLRQ&OLFNRQDIXQFWLRQ
and proceed according to the
instructions on the screen.
z When previous Windows
LQVWDOODWLRQÂżOHVDUHLQWKHVHOHFWHG
partition, a message appears
LQIRUPLQJ\RXWKDWWKHÂżOHVDQG
folders will be moved to the
:LQGRZVROGIROGHU&OLFNWKHOK
button.
subsequent steps are the same
8 asThethose
from Step 7 of Installing in
Windows.
137
Reinstalling Windows XP
(For Windows XP, For supported models only)
You can reinstall Windows using the SYSTEM RECOVERY MEDIA when Windows
GRHVQRWZRUNSURSHUO\ )RUPRGHOVVXSSOLHGZLWKD6<67(05(&29(5<0(',$
For models supplied with the Samsung Recovery Solution, you can reinstall Windows
using the Samsung Recovery Solution.
These descriptions are for Windows XP and for supported models only.
z A SYSTEM RECOVERY MEDIA may not be supplied depending on your computer
model.
z The SYSTEM RECOVERY MEDIA is supplied as a CD or DVD depending on your
model, and some models are printed as System Recovery CD.
z To reinstall Windows using SYSTEM RECOVERY MEDIA, an external-type ODD
must be connected before turning the computer on. The following descriptions
assume that an external ODD is connected.
5HLQVWDOOLQJ:LQGRZVPD\GHOHWHGDWD ÂżOHVDQGSURJUDPV VDYHGRQWKHKDUGGLVN
GULYH0DNHVXUHWREDFNXSDOOLPSRUWDQWGDWD6DPVXQJ(OHFWURQLFVVKDOOQRWEHKHOG
liable for any loss of data.
Running SYSTEM RECOVERY
MEDIA
Insert the SYSTEM RECOVERY MEDIA
into the CD-ROM drive.
138
Standard Installation
z Standard Installation
You can change the settings for
partitioning, the installation folder,
etc. during the Windows installation.
However, reinstalling Windows may
GHOHWHWKHGDWDRQWKHKDUGGLVNGULYH
VXFKDVÂżOHVSURJUDPVHWF,QRUGHU
to minimize damage from data loss,
SOHDVHUHPHPEHUWRDOZD\VEDFNXS
data.
Explain Standard Installation option as a
standard.
,QWKHLQLWLDOVFUHHQFOLFNStandard
1 Installation.
z Quick Installation
This re-installs Windows with the user
GDWDDQGWKHV\VWHPFRQÂżJXUDWLRQ
intact. The user data in the already
existing Windows folders may be
preserved as the existing Windows
folders are overwritten.
The description for the Standard
2 ,QVWDOODWLRQDSSHDUV&OLFNYes.
The
installation starts, and the system will
be restarted after a while.
:KHQ4XLFN,QVWDOODWLRQLVVHOHFWHG
Setup proceeds with Step 3 before
automatically installing Windows.
4XLFN,QVWDOODWLRQRYHUZULWHVWKH
existing Windows version, so that
drivers or applications do not need to
be reinstalled.
139
After the system has restarted, the
After the installation process copies
3 PHVVDJHÂś3UHVVDQ\NH\WRERRWIURP
5 the
necessary folders for the
&'ÂśDSSHDUV'RQRWSUHVVDQ\NH\
at this time. After a while the partition
FRQÂżJXUDWLRQVFUHHQDSSHDUV7RQRW
change the partition, press Enter.
Windows installation, restart the
system, and the message “Press any
NH\WRERRWIURP&'´LVGLVSOD\HG Control Panel
> User Accounts and Family
Protection > User Accounts >
Change User Accounts Control
Settings.
l 6HOHFWDOHYHODQGFOLFNWKHOK button
WRÂżQLVKWKHVHWWLQJ
A In Windows 7, the frequency of the
FRQÂżUPDWLRQZLQGRZWKDWDSSHDUV
during the program installation or
execution or after changing Windows
settings is determined by the security
level setting in the User Account
Control. This may occur when the
security level in the User Account
Control is set to Alarm always.
142
Windows Firewall setting
according to the network location
T The
(for the Windows 7 operating
Is Virtual XP?
(For Windows 7 only,
T What
For supported models only)
system only)
A Windows 7 allows different Windows
ÂżUHZDOOVHWWLQJVIRUHDFKQHWZRUN
location.
 7KHIROORZLQJQHWZRUNORFDWLRQVDUH
available: Home Network, Company
Network and Common Network.
You can determine whether to use the
:LQGRZV)LUHZDOODQGVHOHFWDÂżUHZDOO
security setting for each location.
n ,IWKHQHWZRUNVHWWLQJZLQGRZDSSHDUV
in Windows 7 after setting up the IP
address, select a location.
l &OLFNStart
> Control Panel >
System and Security > Windows
Firewall > Activate or Deactivate
Windows Firewall.
W 6HWXSDÂżUHZDOOIRUWKHHome
and Company (Private) Network
Location Settings and the Common
Network Location Settings, and
FOLFNWKHOK button.
143
A Virtual XP refers to a virtual
operating system that allows you
to run Windows XP virtually in the
Windows 7 environment. By using
Virtual XP, you can use applications
that do not run on Windows 7.
君 Requirements for Running Virtual
XP
n Virtual XP is only available on these
three operating systems: Windows
7 Professional, Ultimate, and
Enterprise.
l The memory must be 2 GB or more
and the virtualization function of the
BIOS must exist and be activated by
the CPU.
For more information, refer to the
Help section of the OS or visit
Microsoft’s website.
are the restrictions of
Windows 7 Starter?
T What
A n The DualView function is not
supported when an external display
device is connected.
l The Aero function of Windows 7 is
not supported.
W The Set as Background function to
FKDQJHWKHZDOOSDSHURIWKH'HVNWRS
is not supported.
j Functions that are not supported by
the operating system, may also not
be supported by related programs
such as Easy Display Manager, the
graphics driver and so on.
For more information, refer to the
Help section of the OS or visit
Microsoft’s website.
144
Display Related
LCD screen is too dark or too
bright.
T The
the following cases, the screen
or there is noise for a short
T Inblinks
time.
A 7XUQRQWKH/&'EDFNOLJKWRUDGMXVW
the screen brightness.
Press Fn +#
to turn on the LCD
EDFNOLJKWRUpress Fn +# , Fn +#
to adjust the screen brightness.
} Click the Graphics Related tab,
Change Resolution, Change
Display Device, Remove the AC
Adapter, Restart the System,
Change Power Scheme.
A This may happen while the video
driver is examining the connected
device. While the detection process is
busy, any connected display devices
PD\EOLQNRUVRPHQRLVHPD\RFFXU
The screen saver disturbs screen
viewing during Media Player or
YLGHRÂżOHRSHUDWLRQ
$Ĺš)RU:LQGRZV
Unselect Library > More Options
> Player > Allow screen saver
during playback in the Media
Player.
Ĺš)RU:LQGRZV;3
&OLFNTools > Options > Player and
then clear the Allow screen saver
during playback in the Media
CenterFKHFNER[
When I connect an external
display and change the settings
to display the screen image on
both the LCD and the external
display by pressing the Fn +
key combination, the screen is not
displayed properly.
A Press Fn +#
NH\FRPELQDWLRQ
again. If the screen is still not
displayed or only part of the screen
is displayed by doing this, that means
the LCD resolution is too low or too
wide and the external display does not
support the resolution.
145

5LJKWFOLFNRYHUWKH'HVNWRSVHOHFW
Properties, select the Settings tab and
change the resolution to 800 x 600.
Taskbar on the bottom of the
screen does not appear when a
T The
projector is used as the display
device.
A This may happen, if the projector
does not support LCD resolution. In
this case change the resolution to
800 x 600 (recommended) on your
computer.
Please press the +
NH\VPRUHTXLFNO\RUSUHVVWKH
+NH\VXVLQJWKHV\VWHP
NH\ERDUG
The shortcut icons are not
displayed on the screen even if I
press the shortcut key.
A The shortcut icons only appear when
the Easy Display Manager program is
installed.
Switching the MS-DOS command
prompt to full screen mode or
Windows mode by pressing the
+ keys does not
operate properly.
The color is strange when the
picture is displayed on the
connected monitor (or projector).
A &KHFNWKHPRQLWRUVLJQDOFDEOH
connection and reconnect the cable.
A Pressing the +NH\V
XVLQJDQ86%NH\ERDUGPD\FDXVH
WKHNH\LQSXWWREHUHFRJQL]HGDV
PXOWLSOHNH\LQSXWVGHSHQGLQJRQWKH
NH\ERDUGLQSXWUHFRJQLWLRQWLPH,Q
this case, the MS-DOS command
prompt is repeatedly switched to full
screen and then to Windows several
times.
146
Sound Related
video or audio chatting?
T+RZFDQ,FRQÂżJXUHWKHVRXQGIRU
W Select the Microphone item in the
Record Control window and close
the window.
A1 &RQÂżJXULQJWKH5HDOWHN+'$XGLR
Manager
n Select Control Panel > Realtek HD
Audio Manager.
l Select the Mic tab.
W Select the Suppress noise and the
5HPRYHVRXQGHFKRLWHPVDQGFOLFN
the OK button.
I cannot hear my voice with the
internal microphone.
A This is because the sound from the
internal microphone is removed so
that the sound is not delivered to the
VSHDNHUDQGFDXVHVIHHGEDFNIURP
the internal microphone. However,
you can record the sound from the
microphone normally.
Ĺš)RU:LQGRZV
When using the Remove sound
echo option, select the Play Device
> Speaker > Level tab and set the
Microphone to Mute.
Ĺš)RU:LQGRZV
When using an external microphone,
select the Play Device > Speaker
> Level tab and deselect Mute
for the Microphone. Then you can
listen to the sound from the external
PLFURSKRQHWKURXJKWKHVSHDNHUV
Ĺš)RU:LQGRZV;3
Using Acoustic Echo Cancellation
RSWLRQNHHSVWKH0LFURSKRQH9ROXPH
PXWHGLQWKH3OD\EDFN0L[HU
A2 Playback Mixer Settings
n'RXEOHFOLFNWKHVolume icon in
WKH7DVNEDUDQGVHOHFWOptions >
Properties from the menu.
l Select Realtek HD Audio Input in
WKH0L[HUGHYLFHÂżHOGFRQÂżUPWKDWWKH
Microphone is selected in the Show
the following volume controlsÂżHOG
DQGFOLFNWKHOK button.
147
Ĺš)RU:LQGRZV;3
When using an external microphone,
if you disable the microphone channel
mute function of the play mixer, you
can hear the sound input into the
external microphone through the
VSHDNHU
Mixer while broadcasting music
T+RZFDQ,FRQÂżJXUHWKH5HFRUGLQJ
in WinAMP? (for the Windows XP
is recorded abnormally
when I select the Remove sound
T Sound
echo option, connect an external
microphone, select the Play Device
> Speaker > Level tab and then
deselect Mute for the Microphone.
operating system only)
A1 Playback Mixer Settings
n'RXEOHFOLFNWKHVolume icon in
WKH7DVNEDUDQGVHOHFWOptions >
Properties from the menu.
l Select Realtek HD Audio Input in the
0L[HUGHYLFHÂżHOGVHOHFWStereo Mix
in the Show the following volume
controlsÂżHOGDQGFOLFNWKHOK
button.
W Select the Stereo Mix item in the
Record Control window and close
the window.
A This occurs because the algorithm
used to remove the echo sound
regards some of the sound as an
echo and removes this, as the
recording is done by playing the
sound from the external microphone.
Ĺš)RU:LQGRZV
After selecting the Remove sound
echo option, please select the Play
Device > Speaker > Level tab and
select Mute for the Microphone for a
normal recording.
A2 Realtek HD Sound Effect Manager
Settings
n&OLFNStart > Control Panel >
Sounds, Speech, and Audio
Devices > Realtek HD Sound Effect
Manager.
l&OLFNMicrophone tab.
W Unselect Noise Suppression and
Acoustic Echo Cancellation and
&OLFNOK.
Ĺš)RU:LQGRZV;3
In this case, select Mute in the
0LFURSKRQH9ROXPHRIWKH3OD\EDFN
Mixer after selecting Acoustic Echo
Cancellation item.
148
Wired LAN Related
 ,IWKHV\VWHPZDNHXSIURP6OHHS
mode even though there is no
received signal, use the system
DIWHUGLVDEOLQJWKH:DNH2Q/$1!
function.
T The  function
A :DNH2Q/$1!LVDIXQFWLRQWKDW
activates the system from Sleep mode
when a signal (such as a ping or
PDJLFSDFNHWFRPPDQG DUULYHVRYHU
WKHQHWZRUN ZLUHG/$1 
- The LAN LED may not be turned off if
System is shutdown without disabling
WKH:2/:DNHRQ/$1!RSWLRQ
z Using the 
Function
n Ĺš)RU:LQGRZV
  &
 OLFNStart > Control Panel >
Network and Internet > Network
and Sharing CenterDQGFOLFNRQ
Change adapter settings in the
left menu pane.
Ĺš)RU:LQGRZV;3
  &
 OLFNStart > Control Panel >
Performance and Maintenance
> System > Hardware > Device
Manager > Network Adapters.
- Connecting a wired LAN while using
a wireless LAN may not activate the
:DNH2Q/$1!IXQFWLRQ6HWWKH
Wireless LAN to Disable to use the
:DNH2Q/$1!IXQFWLRQ
)RU:LQGRZV:DNH2Q/$1LVQRW
supported Ping.
l 5LJKWFOLFNRQWKH/RFDO$UHD
Connection and select Properties.
W &OLFN&RQÂżJXUH > Power
Management tab. Select Allow this
device to bring the computer out of
standbyWKHQFOLFNOK. Restart the
system.
When I am connected to a
100Mbps/1Gbps wired LAN and the
computer exits Sleep/hibernation
mode, a message appears
informing you of a connection to a
10Mbps/100Mbps wired LAN.
A When the computer exits standby/
KLEHUQDWHPRGHUHVWRULQJWKHQHWZRUN
WDNHVDERXWVHFRQGV
 :KHQWKHQHWZRUNLVUHVWRUHGLW
operates at 100Mbps/1Gbps.
149
Home Group function
(for the Windows 7 operating
T The
system only)
A Home Group is a function that
enables connecting all the computers
at home allowing users to access the
data on all computers as if accessing
the data on the local computer.
,I\RXVHWWKHÂżUVWFRPSXWHUWRXVHD
Home Group as a Home Network,
you can create a Home Group. A
second (and more) computer can
participate in the created Home
Group. A password is required for
SDUWLFLSDWLRQDQG\RXFDQFRQÂżUPWKH
SDVVZRUGRQWKHÂżUVWFRPSXWHU
This function is only available between
computers that have the Windows 7
operating system installed. If an older
operating system that Windows 7 is
installed on a computer, the computer
cannot create or participate in a
Home Group.
In addition, using the Home Group
function is restricted in the Windows
7 Starter version because of the
operating system properties.
150
Wireless LAN Related
A3 &KHFNWKDWWKHGHYLFHGULYHULV
installed properly. If the driver is
QRWSURSHUO\LQVWDOOHG\RXZLOOÂżQG
D\HOORZH[FODPDWLRQPDUNRQWKH
QHWZRUNLFRQE\FOLFNLQJDevice
Manager > Network Adapter.
T ,FDQQRWÂżQGDQ$3
A Verify whether the Wireless LAN LED
is on.
If it is turned off, turn it on by pressing
the Wireless LAN On/Off button
(Fn +#
).
The Wireless LAN device is
operating properly, but I cannot
connect to the Internet or to
another computer.
The signal strength is excellent,
but I cannot connect to the
network.
 Even if the signal strength is
excellent, the network connection
may not operate properly if the
TCP/IP properties are not properly
FRQÂżJXUHGRUWKHQHWZRUNNH\
(encryption key) is incorrect.
 This is due to an incorrect
FRQÂżJXUDWLRQRUDFRQÂżJXUDWLRQ
error. Check the following:
A1 &KHFNWKDWWKH7&3,3SURSHUWLHV
DUHFRQÂżJXUHGSURSHUO\:KHQ
FRQQHFWLQJWRDQ$3ULJKWFOLFNWKH
Network Connections
icon on
WKHWDVNEDUDQGVHOHFWNetwork and
Sharing Center,I\RXFOLFNWKHView
Status next to a connected wireless
QHWZRUNGHYLFHDQGWKHQFOLFNWKH
Detail button, you can view the IP
information.
A1 When connecting to a wireless Ad+RFQHWZRUNFKHFNLIWKHQHWZRUN
name (SSID) is the same.
A2 ,IDQHWZRUNNH\ HQFU\SWLRQNH\ LV
used, the AP (Access Point) and
ZLUHOHVV$G+RFQHWZRUNNH\VPXVW
be the same.
 7KH$3QHWZRUNNH\FDQEH
FRQÂżJXUHGXVLQJDQ$3PDQDJHPHQW
program. For more detailed
LQIRUPDWLRQDVN\RXUQHWZRUN
administrator or product provider.
151

)RU:LQGRZV;3GRXEOHFOLFNWKH
LFRQDQGFKHFNLIWKH,3DGGUHVVLV
properly allocated on the Support
tab.
If the IP is not allocated properly, the
IP address will be displayed as follows
(e.g. 169.254.xxx.xxx).
,IWKHQHWZRUNGRHVQRWSURYLGH'+&3
you have to specify the correct IP
DGGUHVVE\DVNLQJ\RXUQHWZRUN
administrator.
(YHQLIWKHQHWZRUNSURYLGHV'+&3
the server may not allocate an IP
address to the client properly, and the
client station cannot connect to the
QHWZRUN
} Check the AP Settings
For the AP settings, refer to the
User Guide provided by the AP
manufacturer.
A3 Verify whether the AP is operating
properly.
z When the AP is not operating
normally, turn off the AP, wait a short
while, and turn it on again.
z 9HULI\ZKHWKHUWKH$3ÂśVÂżUPZDUHLV
the most recent version. (Contact the
AP manufacturer or the place where
you purchased the AP for details of
WKH$3ÂżUPZDUH
A4 Verify whether the AP has been
SURSHUO\FRQQHFWHGWRWKHQHWZRUN
9HULI\ZKHWKHUWKHQHWZRUNLV
operating normally by connecting
WKHZLUHGQHWZRUNFDEOHZKLFKKDV
been connected to the AP, to your
computer.
A5 &KHFNWKHQHWZRUNNH\VHWWLQJV
HQFU\SWLRQNH\ DJDLQ:KHQ
automatic code conversion (a
passphrase function) has been
selected and data communication
is not functioning even with a
normal wireless connection, it is
UHFRPPHQGHGHQWHULQJWKHQHWZRUN
NH\ HQFU\SWLRQNH\ PDQXDOO\
A2 Verify whether the environment
is suitable for using a wireless
LAN. The use of a wireless LAN
may be restricted according to the
environment and distance. Obstacles
such as walls or doors affect the use
of a wireless LAN. Install the AP in a
high and open space, 50cm from the
wall and far removed from any other
radio signal sources.
152
A6 &KHFNWKH$3VHWWLQJVDVIROORZV
(The following is recommended for
a standard environment and thus
PD\GLIIHUDFFRUGLQJWRWKHVSHFLÂżF
ZLUHOHVVQHWZRUNHQYLURQPHQW
z When several APs are present
VLPXOWDQHRXVO\FKHFNWKHFKDQQHO
settings for each AP. When different
APs are using nearby channels,
interference may occur between the
electronic waves. Set the AP channels
further apart from each other. (Ex:
Ch1, Ch5, Ch9, Ch13)
z When an AP’s SSID (Service Set ID)
option is set to “Hide”, you cannot
search for that AP on the computer.
We recommend unselecting the
“Hide” option for the AP. The SSID is
a name used for distinguishing one
wireless LAN from another wireless
LAN.
z It is recommended using Long
Preamble. Preamble is a signal for
data transmission synchronization.
Short Preamble may be supported
by some types of APs but may cause
compatibility problems.
z It is recommended using a static IP.
z Since static channel selection is more
reliable than auto channel selection,
it is recommended using a static
channel.
153
have set the same IP address
both the wireless and wired
T Ifor
connections, but they do not work
properly.
A You cannot use wireless and wired
connections using the same IP
address. To sequentially use both the
wired and wireless connections with
the same IP address, you need to set
the currently not needed connection
WR'R1RW8VHLQWKH1HWZRUN
Connections of the Control Panel.
wireless LAN does not
work properly when there is a
T The
device operating on an adjacent
frequency in the vicinity of the
product.
A1 Channel interference may occur when
a wireless video transceiver or a
microwave oven is being used. If you
experience channel interference from
other equipment, we recommended
changing the channel for connecting
to the AP. For more information about
AP settings, refer to the User Manual
supplied by the AP manufacturer.
A2 Since IEEE802.11g equipment
operates in hybrid mode when there
is active IEEE802.11b equipment, the
data rate may be degraded.
154
Games and Programs Related
Windows may not provide some functions properly when performing some applications
especially games, or may cause a problem due to a device driver compatibility issue.
)RUWKHODWHVWGHYLFHGULYHUVDQGEXJÂż[HVSOHDVHUHIHUWRWKHUHVSHFWLYHFRPSDQ\ÂśV
website.
game is not executed, or some
picture on the screen is
functions are not working.
displayed as a broken image for
T 3D
T The
some games.
A Change the graphic setting of the
game to “2D” or “Software Renderer,”
then execute the program again.
A A part of the picture on the screen
PD\EHEURNHQZKHQSOD\LQJ
some games that require a highVSHFLÂżFDWLRQJUDSKLFVFDUG
In this case, set the 3D function
setting for the game to a lower value
or set the game resolution to a lower
value.
Game play is not displayed
smoothly on the screen.
A For 3D games, the texture data
for the 3D screen display is saved
to the system memory. If there is
LQVXIÂżFLHQWV\VWHPPHPRU\WKHGDWD
LVVDYHGWRWKHKDUGGLVNGULYHDQG
loaded to memory when required.
This operation may temporarily stop
displaying the picture on the screen.
In this case, lower the game
resolution or the screen settings.
I launched a game right after
installing it, and the game is not
executed.
A This problem may occur when the
game is not compatible with Windows.
Launch the game again, and it will be
executed properly.
155
+
Key combination does
T Fn
not work.
speed of a game is too
slow or fast.
T Running
(for the Windows XP operating
system only)
A While displaying video of VCD or
MPEG, or the display setting is Dual
View, you cannot toggle display
devices. Also the installation of
NetWare Client 32 program disables
the function of Fn +#
A Change the setting of Power
Schemes to “Always On.”
&OLFNStart > Control Panel >
Performance and Maintenance >
Power Options > Power Schemes
WDEWKHQFRQÂżJXUHWKH3RZHU
VFKHPHV¿HOGWR³$OZD\V2Q´
playing a game, pressing
T While
keys does not work
the Fn +
or the screen is not properly
displayed.
A Some games and 3D application
programs may change the display
device control. Therefore, pressing
the Fn +#
NH\VPD\WHUPLQDWHWKH
running program or may display an
abnormal screen.
Press the Fn +#
NH\VEHIRUH
launching a program and do not press
them while running the program.
Some part of a game image is not
displayed or is displayed in black.
A This may happen when running a
game designed for DirecX 8.1 or
which has 1024 x 768 as the default
resolution, such as NHL 2003, MVP
Baseball 2003, Special Forces,
Hangame, Pmang etc.
156
picture is not displayed
properly for some games.
T The
A Some games may not display the
picture properly when the screen
resolution is set to 1024 × 600 and the
color quality is set to 32 bit.
For these games, set the screen
resolution to 1024 x 600 or 800 x 600,
and the color quality to 16bit.
157
Bluetooth
to view the Bluetooth help
information.
T How
$Ĺš)RU:LQGRZV
Press the Windows + F1NH\
combination to launch Windows Help
and search for Bluetooth related
items in the Help section.
Ĺš)RU:LQGRZV;3
 'RXEOHFOLFNWKHMy Bluetooth
Environment shortcut icon on the
Desktop to launch the program, and
then press the F1NH\WRYLHZWKH
help information.
,FDQQRWÂżQGRUFRQQHFWWKH
headset.
A1 If the headset is connected to another
device and is currently being used,
you will not be able to locate it. In this
case, even if you locate the headset,
you will not be able to connect it.
Disconnect the headset from the
device and then try again.
158
A2 For some headset models, if the
headset is connected to the power
adapter, the headset cannot be
connected through the Bluetooth
wireless connection.
Disconnect the headset from the
power adapter and try again.
A3 A Bluetooth headset generally
provides On/Off and Pairing modes.
To connect the headset to another
Bluetooth device such as a computer
or cellphone, it must be in Pairing
mode. Switch the headset to Pairing
mode and try again.
In general, a Bluetooth headset
in Pairing mode is automatically
switched to On/ Off mode after a predetermined period of time.
Usage Instructions
z The Bluetooth function of a Bluetooth
PDA, mobile phone, mouse or
NH\ERDUGPD\EHWXUQHGRII7RXVH
them in connection with a Samsung
computer supporting Bluetooth, you
PXVWFKHFNLIWKH%OXHWRRWKIXQFWLRQRI
the device to connect to is turned on.
For the procedures on turning on the
Bluetooth function of a device, refer to
the relevant device manual.
z Generally, Bluetooth devices deliever
stable performance while connected
within a 3m(10 ft.) distance.
z For Bluetooth to operate smoothly, use
the computer in an open environment
with no walls or obstacles in the way
and having low radio interference.
z You can connect to only one
Bluetooth device at a time for a phone
connection, data syncing, electronic
business card exchange, FAX
transmission/reception, sound related
functions, and serial port functions.
z The services provided by Bluetooth
devices may vary depending on their
capabilities. For the services provided
by the Bluetooth device, refer to the
device manual.
z It is recommended using only
one Bluetooth device at a time as
connecting multiple Bluetooth or other
wireless devices at the same time
may slow or destabilize the Bluetooth
connection.
z Data communications via Bluetooth
may be poor when the CPU load is at
IXOOFDSDFLW\RUWKHUHDUHLQVXIÂżFLHQW
system resources.
159
Easy Content Share Related
connected device is shown in
Easy Content Share.
T No
If no connected device is shown,
FKHFNWKHIROORZLQJ
A1 &KHFNZKHWKHU\RXU79VXSSRUWV
DLNA. For more information on this,
refer to the User Manual of your TV.
A2&KHFNZKHWKHUDOOGHYLFHVFRQQHFWHG
to the access point are turned on.
A3&KHFNZKHWKHU\RXU3&DQG79
are connected to the access point
correctly.
A4&KHFNZKHWKHUWKHQHWZRUNORFDWLRQ
of your PC is set to Home network or
Work network.
A5 This problem may occur due to
a vaccine program. (This is only
applicable to models where McAfee
Security Center is installed).
In this case, change the settings by
following the steps below.
,IQRWFOLFNControl Panel > All
Control Panel Items > Network and
Sharing Center > Public Network.
&KDQJHWKHQHWZRUNORFDWLRQWRHome
network or Work network.
160
n 'RXEOHFOLFNWKHMcAfee Security
Center icon
to launch it.
 &OLFN&RQÂżJXUH!,QWHUQHW 
Network > Advanced.
l 6HOHFWWKH1HWZRUNPHQXLWHP,Q
WKH1HWZRUNSDQHWRWKHULJKWRIWKH
ZLQGRZFKHFNZKHWKHUWKH7\SHLVVHW
to Trusted.
If it is not set to Trusted, change
it to Trusted by performing these
operations:
&OLFNEdit > Change the type to
Trusted!&OLFNOK.
161
My TV which has been used
successfully with Easy Content
Share is suddenly not shown in the
list.
A1 7KLVLVEHFDXVHWKHQHWZRUNLV
XQVWDEOH&OLFNRefresh
to update
the list of devices connected to the
access point.
A2 This problem may occur due to
a vaccine program. (This is only
applicable to models where McAfee
Security Center is installed).
Q. Refer to answer A5 for the
question Q. No connected devices
are shown in Easy Content Share.
T
Subtitles are not displayed when
viewing videos on my TV.
A Easy Content Share does not
support subtitles due to DLNA
constraints. To enjoy videos with
subtitles, you should install Samsung
TV’s bundled DLNA S/W (applicable
to Samsung TVs only).
No screen is displayed when I try
to view a video on my TV.
A If the format of the video is not
supported by your TV, no screen will
be output.
The same symptom also occurs when
RWKHUSOD\EDFNGHYLFHVH[FHSWIRU\RXU
TV do not support the video format.
n Install the DLNA S/W bundled with
your Samsung TV on your computer.
l 6KDUHWKHÂżOHV\RXZDQWWRSOD\XVLQJ
the Samsung TV’s bundled DLNA
S/W.
(For more information on how to use
Samsung TV’s bundled DLNA S/W,
refer to the User Manual of your TV.)
W Run Easy Content Share. If the
Samsung TV’s bundled DLNA S/W
you installed is listed in the remote
server list of Easy Content Share,
the sharing settings have been
FRQÂżJXUHGVXFFHVVIXOO\
j In Easy Content Share, add the
shared content of the Samsung TV’s
bundled DLNA S/W to the playlist.
Now you can enjoy subtitles.
Do only the PC and TV have the
DLNA function?
A Some cell phones, printers, photo
frames and refrigerators, etc. support
the DLNA function.
Devices supporting the DLNA
IXQFWLRQFDQVKDUHÂżOHVZLWKHDFK
other. Depending on each product,
a product may only support sharing
SKRWRVRUPXVLFÂżOHV)RUGHWDLOHG
information on the DLNA functions,
refer the user manual of each product.
162
Chapter 5.
Appendix
3URGXFW6SHFLÂżFDWLRQV
4
Glossary
166
Index
171
3URGXFW6SHFLÂżFDWLRQV
7KHV\VWHPVSHFLÂżFDWLRQVPD\GLIIHUGHSHQGLQJRQWKHGHULYHGPRGHOV)RUGHWDLOHG
V\VWHPVSHFLÂżFDWLRQVUHIHUWRWKHSURGXFWFDWDORJ
CPU
Intel ATOM™ Processor
Main Memory (Optional)
Memory type: DDR2 SODIMM
Main Chipset
Intel NM10 Express
Hard Disk Drive (Optional)
9.5mmH SATA HDD
Graphics
Intel GMA 3150 (Internal)
Operating Environment
Temperature : -5~40°C for storage, 10~32°C when operating
Humidity : 5~90% for storage, 20~80% when operating
Operating Voltage
100 - 240VAC
Frequency
50/60Hz
Output Power (Optional)
40W
Output Voltage (Optional)
19VDC 2.1A(40W)
z Optional components may not be provided or different components may be provided
depending on the computer model.
z7KHV\VWHPVSHFLÂżFDWLRQVDUHVXEMHFWWRFKDQJHZLWKRXWQRWLFH
164
Registered Trademarks
LVDWUDGHPDUNRI656/DEV,QF
WOW XT technology is incorporated
under license from SRS Labs, Inc.
656:2:;7ŒVLJQL¿FDQWO\LPSURYHV
WKHSOD\EDFNTXDOLW\RIDXGLRGHOLYHULQJ
a dynamic 3D entertainment experience
with deep bass from even the smallest
DQGPRVWFORVHO\VSDFHGVSHDNHUV
6DPVXQJLVDUHJLVWHUHGWUDGHPDUNRI
Samsung Co., Ltd.
Intel, ATOM/ Pentium/Celeron are
UHJLVWHUHGWUDGHPDUNVRIWKH,QWHO
Corporation.
Microsoft, MS-DOS, and Windows are
UHJLVWHUHGWUDGHPDUNVRIWKH0LFURVRIW
Corporation.
LVDWUDGHPDUNRI656/DEV,QF
TruSurround XT technology is
incorporated under license from SRS
Labs, Inc.
SRS TruSurround XT™ processes
multichannel audio content to create
a truly immersive surround sound
experience with rich bass and clear dialog
IURPWKHODSWRSVSHDNHUVRUKHDGSKRQHV
LVDWUDGHPDUNRI656/DEV,QF
WOW HD technology is incorporated
under license from SRS Labs, Inc.
656:2:+'ŒVLJQL¿FDQWO\LPSURYHV
WKHSOD\EDFNTXDOLW\RIPRQRDQG
stereo audio, delivering a dynamic 3D
entertainment experience with deep bass
and high frequency clarity for crisp detail.
165
LVDWUDGHPDUNRI656/DEV,QF
CS Headphone technology is
incorporated under license from SRS
Labs, Inc.
CS Headphone™ delivers a 5.1 surround
sound experience over standard
headphones or earbuds when listening
to multichannel content, such as DVD
movies.
All other product or company names
mentioned herein are registered
WUDGHPDUNVRIWKHLUUHVSHFWLYHFRPSDQLHV
ENERGY STARÂŽ Partner
As an ENERGY STARÂŽ Partner,
SAMSUNG has determined that
this product meets the ENERGY
STARÂŽ guidelines for energy
HIÂżFLHQF\
Glossary
The Glossary lists the terminologies used in this User Guide.
)RUWHUPLQRORJLHVRWKHUWKDQWKHVHORRNLQ:LQGRZV+HOS
Backup
A way to save the current data to restore
LWODWHULIQHFHVVDU\$EDFNXSLVDZD\
to restore computer data when the data
or computer is damaged.
Chargeable USB
This program enables supplying power
WRDVSHFLÂżF86%SRUWZKHQWKHV\VWHP
is in power saving mode, hibernation
mode or off.
doubling the operating speed of the
SDRAM and is widely used nowadays.
This computer uses DDR SDRAM.
Device Manager
An administrative tool used to manage
computer devices. You can add or
remove hardware or update a device
driver using the Device Manager.
Direct X
An application interface developed to
enable Windows application programs
to access hardware devices at a very
high speed. Since the operating speed
of graphics, memory and sound cards
must be very fast to provide high
quality video and sound for games,
Direct X enables faster control and
interaction between applications and
hardware devices. By using Direct X,
the multimedia performance of Windows
has been hugely improved.
Client
This refers to a computer that uses a
VKDUHGQHWZRUNUHVRXUFHSURYLGHGE\D
server.
DDR SDRAM (Double Data Rate
Synchronous Dynamic Random Access
Memory)
DRAM is a memory type whose cells
consist of a capacitor and transistor
manufactured at a low price. SDRAM
is a memory type whose performance
has been improved by synchronizing
WKHFORFNZLWKWKHH[WHUQDO&38FORFN
DDR SDRAM is a memory type whose
performance has been improved by
166
Driver
Software that interacts between the
hardware and the operating system. An
RSHUDWLQJV\VWHPNQRZVWKHKDUGZDUH
information and controls the hardware.
In general, a driver is supplied with the
corresponding hardware device.
Hibernation Mode
A power mode that saves all data in
PHPRU\WRWKHKDUGGLVNDQGWXUQVWKH
&38DQGKDUGGLVNRII:KHQFDQFHOLQJ
Hibernation Mode, all application
programs that were running are restored
to their last state.
DVD 'LJLWDO9HUVDWLOH'LVN
DVD was developed to replace CD
FRPSDFWGLVN $OWKRXJKWKHVKDSHDQG
size of the disc are the same as that of
a CD, the capacity of a DVD is at least
4.7GB while the capacity of a CD is
0%'9'YLGHRLVGLJLWDOXQOLNH9+6
(analog) video and supports MPEG2
compression and digital audio. To play a
DVD, a DVD drive is required.
Icon
This refers to a small image that
UHSUHVHQWVDÂżOHWKDWXVHUVFDQXVH
Firewall
A security system used to protect an
LQWHUQDOQHWZRUNRULQWUDQHWIURPH[WHUQDO
QHWZRUNV
through an authentication procedure.
167
LAN /RFDO$UHD1HWZRUN
$FRPPXQLFDWLRQVQHWZRUNFRQQHFWLQJ
computers, printers and other devices
within a local area such as within a
building. A LAN enables all connected
devices to interact with other devices
RQWKHQHWZRUN7KHFXUUHQW/$1XVHV
the Ethernet media access control
method developed in the early 1980s.
7RFRQQHFWWRDQ(WKHUQHWDQHWZRUN
card called a LAN card, Ethernet card
RUQHWZRUNLQWHUIDFHFDUGLVUHTXLUHG
To exchange data between computers,
a protocol is required besides the
hardware equipment. Windows XP uses
TCP/IP as the default protocol.
LCD (Liquid Crystal Display)
There are Passive Matrix and Active
Matrix LCD types. This computer uses
the Active Matrix type LCD called a TFT
LCD. Since an LCD is implemented by
transistors instead of a cathode-ray tube
XQOLNHD&57LWVVL]HFDQEHVOLP$QG
EHFDXVHLWGRHVQRWEOLQNLWUHGXFHVH\H
strain.
Network
A group of computers and devices, such
as printers and scanners, connected
E\DFRPPXQLFDWLRQVOLQN$QHWZRUN
can be either small or large and can be
connected permanently through cables
or temporarily through telephone lines
RUZLUHOHVVOLQNV7KHELJJHVWQHWZRUNLV
WKH,QWHUQHWDZRUOGZLGHQHWZRUN
Power Schemes
This refers to a pre-determined power
management option group. For example,
you can set the time the computer waits
before entering Standby Mode, or before
the monitor or hard drive turns off. The
settings are saved as a power scheme.
Quick Launch
This refers to a toolbar that can be
FRQÂżJXUHGVRWKDW\RXFDQODXQFKD
program such as Internet Explorer or
GLVSOD\WKH:LQGRZV'HVNWRSZLWKRQH
FOLFN
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
XMP Toolkit                     : 3.1-701
Modify Date                     : 2010:06:21 17:11:58+08:00
Create Date                     : 2010:06:21 17:11:53+08:00
Metadata Date                   : 2010:06:21 17:11:58+08:00
Creator Tool                    : PScript5.dll Version 5.2
Format                          : application/pdf
Title                           : UserMan_TX2-RTL8192SE.pdf
Creator                         : WendyLiao
Document ID                     : uuid:ff6121e8-dac8-4579-92af-1e5d82d70186
Instance ID                     : uuid:56cf7a59-b795-49c4-a3f7-9374c8046ed4
Producer                        : Acrobat Distiller 7.0 (Windows)
Page Count                      : 91
Author                          : WendyLiao

EXIF Metadata provided by EXIF.tools