| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 116266 |
| Application ID | 6qtz+L25Tp4jnyi2p1gd7Q== |
| Document Description | users manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 84.56kB (1057054 bits) |
| Date Submitted | 2000-09-08 00:00:00 |
| Date Available | 2000-09-08 00:00:00 |
| Creation Date | 0000-00-00 00:00:00 |
| Producing Software | Inso Kansas City Export PDF filter |
| Document Lastmod | 0000-00-00 00:00:00 |
| Document Title | users manual |
1. FUNCTION & FEATURES
1) Long range cordless phone with 900MHz
900MHz cordless phone provide a longer distance than 46/49
Mhz phone. When you visit your neighborhood, you can carry
the Music phone and use this phone even though you are in
your neighborhood.
2) Miniature type
Small size and light weight can gives you for easy hand-carry.
3) Low battery indication
During you call, if the battery capacity drops to a certain level
you may listen a beeper sound and "LOW BAT" LED will turn
ON at which you must charge the battery.
4) 40Channel auto scanning
Before using the music phone, the unit selects the empty
channel which has no interference out of 40 channels automatically. You can call without any interference.
5) Auto talf/stand-by
When the hand-set is riniging while it is on the cradle of baseset unit, if you pick-up the hand-set unit, the unit will go to
TALK mode automatically(Auto Talk) and if you put the handset unit on the base-set unit, after calling it will go to standby
mode automatically. (Auto Stand-by)
6) Auto alarm for escape from communicable distance
The hand-set unit locate far from base-set unit, then alarm
beep will ringing. You can not call in that area, The Music
phone designed for disconnect, after alarm beep. You musit
move near area from the base-set unit.
7) Noise cancellation
The music phone adapt a noise cancellation circuit to provide
better sound quality.
8) Any key
When there is an incoming call, you can make conversation by
pressing any key button
9) MEMORY
¨çMemory for short number:from stand-by status
VOL
MEMORY
Press short number
from on of 0 ~ 9
VOL
Press the number
for memory
MEMORY
*Can memory 16 digit telephone number
*Can memory 0~9 short number
*If you memory a new number then memorized number will
be erased.
*If the setting finished, then you can listen the beeper sound
¨èMemory for PABX or key-phone connected case
If the Music phone connect with PABX or Key-phone, then
most of case you must dial external local connection number(Normally"9") before dial telephone number.
When you memory the telephone number you must insert
"PAUSE" between local connection number and telephone.
(Ex: You want memory "1" address with 123-4567)
VOL
123-4567
RD
MEMORY
VOL
MEMORY
PAUSE
¨éDailing from short number
TALK
Dial one of short number between
VOL
MEMORY
¨êTo store favorite channel at e-dio mode:
VOL
or
MEMORY
10) Volume control
-The Music phone set an initial sound value, when we shipped.
-Louder :
-Basic sound :
¡ã
VOL
VOL
# ¡å
- E-dio mode volume control
¨ç To increase volume :
FUN
3. LOCATION OF CONTROLS
¡ã
FLASH
1) Base-Set Unit
FUN
¡ã
FLASH
¨è To decrease volume :
FUN
FUN
# ¡å
CHARGE
IN
USE
CALL
# ¡å
FLASH
FLASH
10) Channel up/down
e-dio
- To channel up in e-dio mode :
¡ã
e-dio
- To channel down in e-dio mode :
# ¡å
10) Favorite channel selection
1.Antenna : This is for communication terminal between base-set
& Hand-set unit.
2.Charge LED : When the hand-set is ON the cradle of base-set
unit for charge, the LED will light, when charge
the battery
3.IN USE LED : The LED will turn ON when you are in TALK mode.
If you press any number key button in e-dio mode then e-dio
phone will be service your favorite channel.
4.CALL : If you press this button, you may listen a beep sound
from hand-set so you may use for paging also.
5.CHARGE TERMINAL : The power is being supplied through these
terminals.
2. PACKAGES
Please check the contents as soon as you buy the Music phone
CHARGE
CALL
IN
USE
RD
PAUSE
Base-Set Unit
VOL
MEMORY
Hand-set Unit
Adapter
6.PHONE JACK (TEL):To connect to the telephone line
7.ADAPTER JACK:To connect with the adapter(DC9V, 200mA)
8.TONE/PULSE SWITCH:For select a telephone exchanger for
tone/pulse
9.AUDIO/232C JACK :To connect with the computer.
Local cord
Audio/232C code
2) Hand-set unit
5.CHANNEL:You can select another empty channel while you are
conversation with someone.
6.IN USE LAMP:To indicate the current status for TALK/STAND_BY
7.MUTE:During pressed this button, then your counter-partner
can not listen your voice
RD
VOL
PAUSE
8.VOLUME UP/CHANNEL UP/TONE
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.1
Linearized : No
Producer : Inso Kansas City Export PDF filter
Page Count : 5
EXIF Metadata provided by EXIF.tools