Ricoh 500SEW1 Digital Camera with WLAN User Manual Manual 6

Download:
Mirror Download [FCC.gov]
Document ID	729153
Application ID	Aqv4EI/PXfvKitjK2w86MQ==
Document Description	Manual 6
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	159.71kB (1996363 bits)
Date Submitted	2006-11-16 00:00:00
Date Available	2006-12-31 00:00:00
Creation Date	2006-11-06 18:33:19
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2006-11-06 18:33:35
Document Title	Manual 6
Document Creator	PScript5.dll Version 5.2

L7360874_En_00_0_bookfile.book Page 121 Friday, October 13, 2006 12:56 PM
Changing the Step Zooming Setting
(STEP ZOOM)
Step zooming is the setting of the focal length with optical zooming,
which can be fixed to any of four levels (28, 35, 50, 85 mm,
equivalent to that on a 35mm camera).
Available Settings
ON (Use step zooming)
OFF (Do not use step zooming) *Default setting
To set step zooming, follow the steps below.
Display the SETUP menu.
• For the operating procedure, see P.107.
Press the " button to select [STEP ZOOM] and press
the $ button.
Press the !" buttons to select
the desired setting.
Press the MENU/OK button, or
# button and press the MENU/
OK button.
Changing Camera Settings
121
L7360874_En_00_0_bookfile.book Page 122 Friday, October 13, 2006 12:56 PM
Displaying a Settings Change
Warning (SHTG STGS WARNG.)
If the initial settings are changed for the following functions, you can
set the camera to have the icon of that function blink and to display
a warning message about the function with the changed setting for
a few seconds when the camera is turned on.
White balance, Focus, ISO setting, Exposure compensation,
Time exposure
If you operate a camera button while an icon is blinking, the icon
stops blinking and lights steadily. If you operate a camera button
while the warning message is displayed, the message disappears.
Available Settings
ON (Enable warnings) *Default setting
OFF (Disable warnings)
To set change warning, follow the steps below.
Display the SETUP menu.
• For the operating procedure, see P.107.
Changing Camera Settings
122
Press the " button to select [SHTG STGS WARNG.]
and press the $ button.
Press the !" buttons to select
the desired setting.
Press the MENU/OK button, or
# button and press the MENU/
OK button.
L7360874_En_00_0_bookfile.book Page 123 Friday, October 13, 2006 12:56 PM
Changing the USB Setting
(USB CONNECTION)
By setting [USB CONNECTION] to [MASS STR] on the SETUP
menu, you can view files in the camera and transfer files from the
camera to your computer using the USB cable without installing the
supplied software or USB driver.
Usually, set [USB CONNECTION] to [ORIGINAL]. You can transfer
images to your computer using the supplied RICOH Gate La
software.
USB CONNECTION
Mode
Downloading data
MASS STR
ORIGINAL
The SD memory card or
internal memory of the camera
can be operated directly as an
external drive for file
processing.
RICOH Gate La allows
automatic transfer of camera
data to your computer.
Use the Caplio Mounter to
transfer camera data to your
computer. (Mac OS)
Required
• Willing to automate
downloading to a computer
• Using Windows 98/98SE
• Using Mac OS 8.6
Changing Camera Settings
Installation from Caplio
Not required
Software CD-ROM
Supported Operating Systems
Windows 98/98SE
×
Windows 2000
Professional
Windows Me
Windows XP Home Edition O
Windows XP Professional O
Mac OS 8.6
×
Mac OS 9.0 to 9.2.2
Mac OS X 10.1.2 to 10.4.6 O
For those:
• Familiar with OS file
operations
• Not willing to install a USB
driver or other programs
123
L7360874_En_00_0_bookfile.book Page 124 Friday, October 13, 2006 12:56 PM
Caution-----------------------------------------------------------------------------------------• When [USB CONNECTION] is set to [MASS STR], you cannot use RICOH Gate La
to transfer camera data.
• When [USB CONNECTION] is set to [MASS STR], files can only be read from the
camera and cannot be written to or deleted from the camera.
• When [USB CONNECTION] is set to [MASS STR], Direct Print may not be available
for some printers. In such cases, select [ORIGINAL] instead.
To change the USB setting, follow the steps below.
Display the SETUP menu.
• For the operating procedure, see P.107.
Changing Camera Settings
124
Press the " button to select [USB CONNECTION] and
press the $ button.
Press the !" buttons to select
the desired setting.
Press the MENU/OK button, or
# button and press the MENU/
OK button.
Note ---------------------------------------------------------------------------------------------For how to download images from the camera to a computer using the USB cable, see
P.149-153.
L7360874_En_00_0_bookfile.book Page 125 Friday, October 13, 2006 12:56 PM
Enlarging Icon Display
(ENLGE PHOTO ICON)
You can enlarge the icons displayed on the screen during shooting.
The following icons are enlarged:
Flash, Macro Shooting, Self-timer, White balance, Focus,
Exposure compensation, ISO setting
When the icons are enlarged, the following items are not displayed:
Zoom bar/Focus bar, Date imprint, Sharpness, Color depth
To enlarge the icons on the screen, follow the steps below.
Display the SETUP menu.
• For the operating procedure, see P.107.
Press the " button to select [ENLGE PHOTO ICON] and
press the $ button.
Press the !" buttons to select
the desired setting.
Press the MENU/OK button, or
# button and press the MENU/
OK button.
Changing Camera Settings
125
L7360874_En_00_0_bookfile.book Page 126 Friday, October 13, 2006 12:56 PM
Registering the Power-on Settings
(REG. MY SETTINGS)
The My Setting function allows you to make your desired settings to
be used at power-on. For example, when a digital camera is used
in common by multiple persons, you can use the camera without
regard to the settings made by the person who used the camera
previously because the camera settings are restored to your
settings each time the camera is turned on.
Two types of My Settings can be registered.
To register the current camera settings as My Settings, follow the
steps below.
Change the camera settings to the settings to be
registered as My Settings.
Display the SETUP menu.
• For the operating procedure, see P.107.
• A confirmation message appears.
Changing Camera Settings
126
Press the " button to select
[REG. MY SETTINGS] and
press the $ button.
Select [SETTING1] or
[SETTING2] and press the
MENU/OK button.
• The current camera settings will be
registered and the display returns to
the SETUP menu.
• If you do not want to register them,
press the DISP. button.
Press the MENU/OK button.
L7360874_En_00_0_bookfile.book Page 127 Friday, October 13, 2006 12:56 PM
Changing the Startup Settings
(START SETTINGS)
You can use the settings registered in [REG. MY SETTINGS] for the
startup settings.
Display the SETUP menu.
• For the operating procedure, see P.107.
Press the " button to select [START SETTINGS] and
press the $ button.
Select [SETTING1] or
[SETTING2] and press the
MENU/OK button, or # button
and press the MENU/OK
button.
• If you do not use the my setting
function, select [OFF].
Turn your camera off.
• The settings to be used at the next power-on will be changed.
Note ----------------------------------------------------------------------------------------------
Settings Saved by My Setting Function
PIC QUALITY/SIZE
ANTIBLUR
FOCUS
Focal distance used in Manual
PHOTOMETRY
SHARPNESS
CONT. MODE
COLOR DEPTH
EXPOSURE COMP.
TIME EXPOSURE
IMAGE WITH SOUND
DATE IMPRINT
WHITE BALANCE
ISO SETTING
Zoom position
Macro
Flash
Scene Mode
DISP. Mode
DENSITY
FRAME RATE
ENLGE PHOTO ICON
Changing Camera Settings
• When [START SETTINGS] is set to [OFF], settings are retained as usual.
• When [START SETTINGS] is set to [SETTING1] or [SETTING2], the camera settings
made with [REG. MY SETTINGS] are used at power-on even if [RESTORE
DEFAULTS] is selected.
127
L7360874_En_00_0_bookfile.book Page 128 Friday, October 13, 2006 12:56 PM
7 Downloading Images to Your
Computer
The screen images shown here may differ from the images
displayed on your computer depending on your computer OS.
For Windows
Refer to P.142 for Macintosh.
Downloading Images to Your Computer
128
You need to install software for transferring images to your
computer before you can download images from the camera.
Software installation is necessary for automatic image downloading
from the camera to your computer.
Caution-----------------------------------------------------------------------------------------Be sure to install the software before you connect
the camera to your computer. (GP.134)
Note ---------------------------------------------------------------------------------------------• When [MASS STR] is selected for [USB CONNECTION] of the camera’s SETUP
menu, you can view the files in the camera without installing the supplied software or
USB driver (GP.151). At the time of purchase, [ORIGINAL] is selected.
• For how to download images from the camera to your computer, see the “Software
User Guide” available from the Caplio Software CD-ROM. For how to display the
“Software User Guide”, see P.131.
L7360874_En_00_0_bookfile.book Page 129 Friday, October 13, 2006 12:56 PM
Using the Caplio Software CD-ROM
Once you insert the Caplio Software CDROM in the CD-ROM drive, the installer
screen appears automatically.
Description
Use this button to install software required for
handling the camera and images.
Installing DeskTopBinder Lite Use this button to install software required for
handling the camera and images.
Browse User’s Manual
Click this to display the “Software User Guide”
(Software Version)
(PDF).
Browse CD-ROM Content
Click this to display the list of files contained on the
CD-ROM.
Refer to
P.134
P.136
P.131
P.132
Downloading Images to Your Computer
Item Name
Installing the Software
129
L7360874_En_00_0_bookfile.book Page 130 Friday, October 13, 2006 12:56 PM
When [Installing the software] is clicked: (GP.134)
The following software will be installed:
Software
130
Description
RICOH Gate La
Downloads images collectively.
List Editor
Used to create a camera memo list.
Caplio Setting*
Used to make wireless LAN-related settings.
Caplio Server*
Used to set your computer as a Caplio-only FTP
server.
ImageMixer
USB Driver
WIA Driver
Caplio Software
Downloading Images to Your Computer
Windows
XP
98
Shot images can be displayed or edited and video
CDs can be created.
DirectX (GP.139) is necessary for handling
movies.
Used to connect the camera to the computer.
Used to download images.
XP: Windows XP
98: Windows 98/98SE/Me/2000
* Only for Caplio 500SE-W
Note ---------------------------------------------------------------------------------------------• The camera is provided with ImageMixer software that allows you to display and edit
images from your computer. For how to use ImageMixer, click the [?] button on the
ImageMixer window and see the displayed manual.
For the latest information about ImageMixer, access the Web page of Pixela Co., Ltd.
(http://www.imagemixer.com).
• The WinASPI installer starts during installation of ImageMixer. WinASPI is required
when creating a Video CD using ImageMixer.
L7360874_En_00_0_bookfile.book Page 131 Friday, October 13, 2006 12:56 PM
When [Installing DeskTopBinder Lite] is clicked:
(GP.136)
The following software will be installed:
Software
USB Driver
WIA Driver
Description
Software used to manage business documents.
Images in the camera can be downloaded to
DeskTopBinder Lite using the Auto Document Link
that monitors document updating.
Used to connect the camera to the computer.
Used to download images.
XP: Windows XP
98: Windows 98/98SE/Me/2000
Caution-----------------------------------------------------------------------------------------DeskTopBinder Lite is compatible with Windows 98SE but not Windows 98.
Note ---------------------------------------------------------------------------------------------• For details about the DeskTopBinder Lite, refer to the Introduction Guide (PDF file),
Setup Guide (PDF file), Auto Document Link Guide (PDF file), and Help supplied with
the DeskTopBinder Lite.
• For details about the Auto Document Link, refer to the Auto Document Link Guide
(PDF file).
When [Browse User’s Manual (Software Version)] is
clicked:
The “Software User Guide” (PDF file) on the Caplio Software CDROM is displayed on your computer screen.
If you have Acrobat Reader installed on your computer, simply click
[Browse User’s Manual (Software Version)]. Acrobat Reader must
be installed to view the PDF file. (GP.138)
Downloading Images to Your Computer
DeskTopBinder Lite
Windows
XP
98
131
L7360874_En_00_0_bookfile.book Page 132 Friday, October 13, 2006 12:56 PM
When [Browse CD-ROM Content] is clicked:
You can check folders and files on the CD-ROM. The CD-ROM
contains not only the software installed by clicking [Installing the
software] but also the following software. These software products
run on Windows.
For the installation of each software product, see the reference
page in the table below.
Downloading Images to Your Computer
132
Software
Acrobat Reader
DirectX
Description
Required for viewing the “Software User Guide”.
Required for playing movies by the ImageMixer.
Refer to
P.138
P.139
Note ---------------------------------------------------------------------------------------------• For details about Acrobat Reader, see Help for Acrobat Reader.
• To install ImageMixer alone, double-click “setup.exe” in the ImageMixer folder.
L7360874_En_00_0_bookfile.book Page 133 Friday, October 13, 2006 12:56 PM
System Requirements for Using Caplio
Software CD-ROM
The following environments are necessary for using Caplio Software.
Please check your computer, or the computer’s user manual.
Operating Systems
Supported
Hard drive space required
for installation
Display Resolution
Display Colors
CD-ROM Drive
USB Port
Caution-----------------------------------------------------------------------------------------• If your computer has an upgraded OS, the USB function may not work normally, so it
cannot be supported.
• The provided software may not operate properly if changes are made to the operating
system, such as with patches and service package releases.
• The camera does not support connection to a USB port added by using an extension
function (PCI bus or other).
• If used in conjunction with a hub or other USB devices, the software may not work
properly.
• When dealing with movies and other large files, a larger memory environment is
recommended.
Downloading Images to Your Computer
CPU
Memory
Windows 98/98 Second Edition
Windows 2000 Professional
Windows Me
Windows XP Home Edition/Professional
Pentium lll: 500 MHz or faster
Windows 98/98SE: 128 MB or more
Windows 2000: 128 MB or more
Windows Me: 128 MB or more
Windows XP: 256 MB or more
Windows 98/98SE: 500 MB or more
Windows 2000: 500 MB or more
Windows Me: 500 MB or more
Windows XP: 500 MB or more
800 × 600 pixels or greater
65,000 colors or greater
A CD-ROM drive compatible with the above-mentioned computer
A USB port compatible with the above-mentioned computer
133
L7360874_En_00_0_bookfile.book Page 134 Friday, October 13, 2006 12:56 PM
Installing the Software Required for Handling
the Camera and Images on Your Computer
Install the required software on your computer from the CD-ROM
before connecting the camera.
Caution------------------------------------------------------------------------------------------
Downloading Images to Your Computer
• Do not install the software when the camera is connected to your computer with a USB
cable.
• If you happened to connect your camera to the computer (resulting in the [Add New
Hardware Wizard] screen appearing on your computer screen), simply click [Cancel],
and after disconnecting your camera, install the software on your computer.
• If software is already installed from a Caplio Software CD-ROM from a previous
model, a message stating that the old software must be uninstalled before installing
the new one is displayed.
Follow the message instructions and uninstall the old software before installing the
new software. Functions of the old model can still be used as before.
If DU-10 is installed, it will be replaced by Caplio Viewer (an upgraded version of
DU-10). If the old software is uninstalled before the message is displayed, Caplio
Viewer is not installed even if the new software is installed. (For how to uninstall the
software, GP.140.)
• For Windows XP or Windows 2000, administrator privileges are required to install the
software.
Here is an example of the Windows XP screen.
Start your computer and insert
the Caplio Software CD-ROM
in the CD-ROM drive.
• The installer screen appears
automatically.
Click [Installing the software].
• After a while, the [Choose Setup
Language] screen appears.
Confirm the language, and then click [OK].
• The [Welcome to the InstallShield Wizard for Caplio Software] screen
appears.
134
L7360874_En_00_0_bookfile.book Page 135 Friday, October 13, 2006 12:56 PM
Click [Next].
• The [Choose Destination Location]
screen appears.
• The [Select Program Folder] screen
appears.
Confirm the [Select Program
Folder] and then click [Next].
• The ImageMixer installer starts.
Install ImageMixer following the
messages displayed on the screen.
• When installation of ImageMixer is
completed, a dialog box appears,
indicating that all software
applications have been installed.
Click [Finish].
Downloading Images to Your Computer
Confirm where you want to
install and then click [Next].
Restart your computer.
Note ---------------------------------------------------------------------------------------------You can remove (uninstall) the software. (GP.140)
135
L7360874_En_00_0_bookfile.book Page 136 Friday, October 13, 2006 12:56 PM
Installing the DeskTopBinder Lite
Downloading Images to Your Computer
DeskTopBinder Lite is used for managing business documents. As
well as still images captured with a digital camera, you can manage
a variety of documents, including documents input by scanner,
documents created with various applications and image files. You
can also store files with different formats in a single document.
Images downloaded from the camera can be saved to
DeskTopBinder Lite using the Auto Document Link for monitoring
document updating.
Note ---------------------------------------------------------------------------------------------For how to use DeskTopBinder Lite, refer to the Introduction Guide, the Setup Guide, and
the DeskTopBinder Lite - Auto Document Link Guide (all PDF files) that are installed with
DeskTopBinder Lite.
Caution-----------------------------------------------------------------------------------------• If you happened to connect your camera to the computer (resulting in the [Add New
Hardware Wizard] screen appearing on your computer screen), simply click [Cancel],
and after disconnecting your camera, install the software on your computer.
• For Windows XP or Windows 2000, administrator privileges are required to install the
software.
• To download images from the camera using the Auto Document Link of
DeskTopBinder Lite, install the Caplio Software before installing DeskTopBinder
Lite.(GP.134) The driver included in the Caplio Software is required to use the Auto
Document Link.
• If [Caplio Digital Camera] is set as the monitoring destination of the Auto Document
Link, select [ORIGINAL] for [USB CONNECTION] on the camera menu.(GP.123)
Here is an example of the Windows XP screen.
Start your computer and insert
the Caplio Software CD-ROM
in the CD-ROM drive.
• The installer screen appears
automatically.
136
L7360874_En_00_0_bookfile.book Page 137 Friday, October 13, 2006 12:56 PM
Click [Installing DeskTopBinder Lite].
• After a few moments, the [Welcome to the InstallShield Wizard for
Caplio Software S] screen appears.
Click [Next].
• After a few moments, the [Choose Destination Location] screen
appears.
Confirm where you want to
install and then click [Next].
Confirm the [Select Program
Folder] and then click [Next].
Click [OK].
Click [DeskTopBinder Lite].
• The DeskTopBinder Lite installer starts.
• Install DeskTopBinder Lite following the messages displayed on the
screen.
• When the screen where you verify digital ID is displayed, click [OK].
Caution-----------------------------------------------------------------------------------------• DeskTopBinder Lite cannot coexist with a different version of DeskTopBinder Lite,
DeskTopBinder Professional, or Job Binding. Before installing DeskTopBinder Lite,
uninstall these applications. The data used in the previous application can be saved
and inherited by DeskTopBinder Lite. However, when the previous application is
DeskTopBinder Professional, some functions will no longer be available.
• When capturing images from the camera using the Auto Document Link of the
DeskTopBinder Lite, deselect the [Saves automatically when connected to USB]
check box in the [Option settings] dialog box displayed by selecting [Option settings]
on the [RICOH Gate La Settings] menu. (Refer to the “Software User Guide”.) Before
capturing images from the camera, set the date and time using the [DATE SETTINGS]
option of the camera. (GP.119)
• If you turned the camera off and then on again while connected to the computer with
DeskTopBinder Lite open, reboot the computer with the camera connected.
Downloading Images to Your Computer
• The [Select Program Folder] screen
appears.
137
L7360874_En_00_0_bookfile.book Page 138 Friday, October 13, 2006 12:56 PM
Installing Other Software on Your Computer
Caution-----------------------------------------------------------------------------------------• Do not install the software when the camera is connected to your computer with a USB
cable.
• For Windows XP or Windows 2000, administrator privileges are required to install the
software.
Acrobat Reader
Downloading Images to Your Computer
138
Acrobat Reader is required to display the operation manual (PDF
file).
If the computer is running under Windows, Acrobat Reader can be
installed. Acrobat Reader need not be installed if already installed
on your computer.
Start your computer, and insert
the included Caplio Software
CD-ROM into the CD-ROM
drive.
• The installer screen appears
automatically.
Click [Browse CD-ROM
Content].
• The files on the CD-ROM are listed.
Double-click the [Acrobat] folder.
Double-click the [English] folder.
Double-click [ar500enu] (ar500enu.exe).
Install Acrobat Reader by following the messages
displayed.
L7360874_En_00_0_bookfile.book Page 139 Friday, October 13, 2006 12:56 PM
DirectX
DirectX is used to play movie files with ImageMixer.
This camera requires DirectX 8.1 or later to play movie files in
Windows. If you have an earlier version installed, please install the
updated version available on the accompanying CD-ROM. For
Windows XP, installation of DirectX is not needed because the
updated version is already installed.
Start your computer, and insert the included Caplio
Software CD-ROM into the CD-ROM drive.
Click [Browse CD-ROM Content].
Double-click the [DirectX] folder.
Double-click the [English] folder.
Double-click the following file:
Windows 98/98SE/Me
Windows 2000
[DX81xxx.exe] in the [Win98Me] folder
[DX81NTxxx.exe] in the [Win2000] folder
Downloading Images to Your Computer
139
L7360874_En_00_0_bookfile.book Page 140 Friday, October 13, 2006 12:56 PM
Uninstalling the Software
Caution-----------------------------------------------------------------------------------------• For Windows 2000/XP, administrator privileges are required to uninstall the software.
• If any other program is active or unsaved data remains, save the data and terminate
the program before uninstalling.
• If you install both ImageMixer and the DeskTopBinder Lite and then uninstall either
one, camera connection to the computer may fail. In this case, uninstall both [Caplio
Software] and [Caplio Software S] and then install only the required one.
Downloading Images to Your Computer
Caplio Software
Click [Start] on the Windows task bar.
Double-click the [Add/Remove Programs] icon (or the
[Add or Remove Programs] icon in Windows XP).
Select [Caplio Software] (select [Caplio Software S] if
you have installed the DeskTopBinder Lite), and then
click the [Change/Remove] button.
Confirm file deletion and click [OK].
Select [Settings]-[Control Panel] ([Control Panel] for
XP).
• The [Shared File Detected] dialog box appears.
Select the [Don’t display this message again.] check
box, and then click [Yes].
• The uninstallation process begins. When it is finished, close the
displayed window.
140
L7360874_En_00_0_bookfile.book Page 141 Friday, October 13, 2006 12:56 PM
ImageMixer
Click [Start] on the Windows task bar.
Double-click the [Add/Remove Programs] icon (or the
[Add or Remove Programs] icon in Windows XP).
Select [ImageMixer] and then click [Change/Remove].
Select [Settings]-[Control Panel] ([Control Panel] for
XP).
• The uninstallation process begins. When it is finished, close the
displayed window.
Restart your computer.
Downloading Images to Your Computer
Confirm file deletion and click [OK].
141
L7360874_En_00_0_bookfile.book Page 142 Friday, October 13, 2006 12:56 PM
For Macintosh
Refer to P.128 for Windows.
You need to install software for transferring images to your
computer before you can download images from the camera.
Software installation is necessary for automatic image downloading
from the camera to your computer.
Downloading Images to Your Computer
Caution-----------------------------------------------------------------------------------------Be sure to install the software before you connect
the camera to your computer with the cable.
Note ---------------------------------------------------------------------------------------------For how to download images from the camera into your computer, see the “Software
User Guide” available from the Caplio Software CD-ROM. For how to display the
“Software User Guide”, see P.143.
Using the Caplio Software CD-ROM
Software
RICOH Gate La
USB Driver
Caplio Mounter
Mac
Description
Downloads images collectively.
Connects the camera to your computer.
Connects the camera to your computer.
9: Mac OS 8.6 to 9.2.2
X: Mac OS X 10.1.2 to 10.4.6
Note ---------------------------------------------------------------------------------------------• For Mac OS 8.6 to 9.2.2, when the camera and computer are connected, RICOH Gate
La automatically starts and the downloading of images begins. For details about the
software, see the “Software User Guide”.
• For how to download images using Caplio Mounter, see the “Software User Guide”.
142
L7360874_En_00_0_bookfile.book Page 143 Friday, October 13, 2006 12:56 PM
For Mac OS 8.6 to 9.2.2, doubleclicking the [Installer] icon displays the
[Digital camera software installer]
window.
Item Name
Installing the Software
Browse User’s Manual
(Software Version)
Description
Use this button to install software required for handling the
camera and images.
Use this button to display the “Software User Guide” (PDF).
When [Installing the software] is clicked (GP.145,
P.146):
The software will be installed.
When [Browse User’s Manual (Software Version)] is
clicked:
The “Software User Guide” (PDF file) on the Caplio Software
CD-ROM can be displayed on your computer screen.
Acrobat Reader must be installed to view the PDF file.
Downloading Images to Your Computer
Note ---------------------------------------------------------------------------------------------The “Digital camera software installer” window is not displayed in Mac OS X 10.1.2 to
10.4.6. (GP.146)
143
L7360874_En_00_0_bookfile.book Page 144 Friday, October 13, 2006 12:56 PM
System Requirements for Using the Caplio
Software CD-ROM
The following environments are necessary for using the Caplio
Software.
Please check your computer, or the computer’s user manual.
Downloading Images to Your Computer
Operating System
Macintosh
Internal Memory
Mac OS 8.6 to 9.2.2/Mac OS X 10.1.2 to 10.4.6
A USB port standard-equipped Apple Macintosh Series
Mac OS 8.6 to 9.2.2
96 MB or more
(128 MB or more recommended)
Mac OS X 10.1.2 to 10.4.6
128 MB or more
(256 MB or more recommended)
Application Allocated Without using the compression utility, 16 MB or more (24 MB or more
Memory (For Mac OS is recommended) as Application Memory
8.6 to 9.2.2)
Hard Disc Drive
Mac OS 8.6 to 9.2.2
10 MB or more (at installation)
Capacity
Mac OS X 10.1.2 to 10.4.6
100 MB or more (at installation)
100 MB or more (at operation)
Display Resolution
800 × 600 pixels or greater
Display Colors
32,000 colors or greater
CD-ROM Drive
A CD-ROM drive compatible with the above-mentioned Macintosh
machine
USB Port
A USB port compatible with the above-mentioned computer body
Caution-----------------------------------------------------------------------------------------• The provided software may not operate properly if changes are made to the operating
system.
• Connection to a USB port retrofitted using an extended function (PCI bus, etc.) cannot
be supported.
• If used in conjunction with a hub or other USB devices, the software may not work
properly.
Note ---------------------------------------------------------------------------------------------• When dealing with movies and other large files, a larger memory environment is
recommended.
• For Mac OS 8.6 to 9.2.2, use a larger memory environment, as well as allocating extra
application memory.
144
L7360874_En_00_0_bookfile.book Page 145 Friday, October 13, 2006 12:56 PM
Installing the Software Required for Handling
the Camera and Images on Your Computer
(Mac OS 8.6 to 9.2.2)
Install the required software on your computer from the CD-ROM
before connecting the camera.
Caution------------------------------------------------------------------------------------------
Click [OK] to update.
Downloading Images to Your Computer
Do not install the software when the camera is connected to your computer with a USB
cable.
Click [Install].
Turn on your Macintosh and insert the Caplio Software
CD-ROM in the CD-ROM drive.
Double-click the [Caplio Software] icon.
Double-click the [MacOS9] folder.
• The [Installer] icon appears.
Double-click [Installer].
• The [Digital camera software installer]
window opens.
Click [Installing the software].
• When installation finishes, a message
appears to inform you that it is
necessary to restart your Macintosh.
Click [Continue].
• The software is installed and after a while the Installation Complete
message appears.
Click [Restart].
• Your Macintosh restarts.
145
L7360874_En_00_0_bookfile.book Page 146 Friday, October 13, 2006 12:56 PM
Installing the Software Required for Handling
the Camera and Images on Your Computer
(Mac OS X 10.1.2 to 10.4.6)
Install the required software on your computer from the CD-ROM
before connecting the camera.
Caution-----------------------------------------------------------------------------------------Downloading Images to Your Computer
Do not install the software when the camera is connected to your computer with a USB
cable.
Turn on your Macintosh and insert the Caplio Software
CD-ROM in the CD-ROM drive.
Double-click the [Caplio Software] icon.
Open the [Mac OS X] folder.
• Folders named [Mac OS X 10.1 - 10.3] and [Mac OS X 10.4] appear.
Click the folder for your OS.
• Double click [Mac OS X 10.1 - 10.3] if you are using Mac OS X 10.3 or
earlier. Double click [Mac OS X 10.4] if you are using Mac OS X 10.4
or later. The [Caplio Mounter] icon appears.
Double-click [Caplio Mounter].
• The [Install Caplio Mounter] screen
appears.
• The [Caplio Mounter] in the [Mac OS X
10.4] folder cannot be installed in Mac
OS X 10.1 to 10.3.
Click [Continue].
• The installation Readme file appears. Click [Continue].
Click [Continue].
• The screen to select the destination disk appears.
146
L7360874_En_00_0_bookfile.book Page 147 Friday, October 13, 2006 12:56 PM
Click the destination disk you
want, and then click
[Continue].
Click [Install].
10
Enter the administrator’s name and password, and then
click [OK].
• A message appears to inform you that it is necessary to restart your
Macintosh when installation finishes.
11
Click [Continue Installation].
• The software is installed, and after a while an Installation Complete
message appears.
12
Click [Restart].
• Your Macintosh restarts.
Downloading Images to Your Computer
• Click [Upgrade] to update the software.
• A screen appears prompting you to enter the administrator’s
password.
147
L7360874_En_00_0_bookfile.book Page 148 Friday, October 13, 2006 12:56 PM
Uninstalling the Software
Caution-----------------------------------------------------------------------------------------If any other program is active or unsaved data remains, save the data and terminate the
program before uninstalling.
Mac OS 8.6 to 9.2.2
Downloading Images to Your Computer
148
Delete the following files in the System Folder from
your Macintosh.
File Name
RICOH Gate La
RICOH Gate La Prefs
Caplio Mounter
Caplio Mounter Prefs
Caplio USB Driver
Caplio LIB
Folder Name
Control Panels
Preferences
Extensions
Preferences
Extensions
Extensions
Mac OS X 10.1.2 to 10.4.6
Start [Caplio Mounter] in [Applications] folder.
Select [Uninstall] in [File] menu.
• The uninstallation process begins.
L7360874_En_00_0_bookfile.book Page 149 Friday, October 13, 2006 12:56 PM
Connecting the Camera to Your
Computer
Make sure the camera power is off.
Connect the USB cable to the
USB terminal of your camera.
Connect the USB cable to the
USB port of your computer.
• Your camera turns on.
• In Windows the first time you connect
your camera to the computer using a
USB cable, the [Found New Hardware
Wizard] screen will appear.
(GP.150)
• When using Macintosh or when
connecting the camera to a Windows computer that you have
connected the camera to already, RICOH Gate La starts and image
transfer begins automatically.
Downloading Images to Your Computer
After installing the software on your computer, connect your camera
to the computer.
The following explanation is provided assuming that [ORIGINAL]
(default) is selected at [USB CONNECTION] of the camera’s
SETUP menu. (GP.123) If [MASS STR] is selected, change it to
[ORIGINAL]. You can also download images in mass storage mode
(GP.151).
Caution-----------------------------------------------------------------------------------------Before opening or closing the battery/card cover or terminal cover, be sure to remove any
water, sand or mud adhering to the camera, and avoid opening and closing the cover in
places where such contaminants may get inside the camera.
149
L7360874_En_00_0_bookfile.book Page 150 Friday, October 13, 2006 12:56 PM
Using the Caplio Software to Download Images
In Windows the first time you connect your camera to the computer
using a USB cable, the [Found New Hardware Wizard] screen will
appear. (Does not appear on Macintosh.)
Here is an example of the Windows XP screen.
Downloading Images to Your Computer
Select [Install the software
automatically (Recommended)].
Insert the Caplio Software CD-ROM into the CD-ROM
drive on your computer.
• Installation of the WIA driver automatically starts. If the CD-ROM is
already on your computer when the [Found New Hardware Wizard]
screen is displayed, simply click [Next] to start installation.
Note ---------------------------------------------------------------------------------------------By default, the WIA driver is installed in the following location:
Specify the folder if the CD-ROM is not available.
My Computer
Local Disk
Program Files
Caplio Software
WIA driver
150
Select [RICOH Gate La], check
[Always use this program for
this action] check box, and
then click [OK].

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2006:11:06 18:33:35+09:00
Create Date                     : 2006:11:06 18:33:19+09:00
Title                           : 
Author                          : 
Creator                         : PScript5.dll Version 5.2
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Page Count                      : 30
Mod Date                        : 2006:11:06 18:33:35+09:00
Creation Date                   : 2006:11:06 18:33:19+09:00
Metadata Date                   : 2006:11:06 18:33:35+09:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools