Ricoh 500SEW1 Digital Camera with WLAN User Manual Manual 8
Ricoh Company, Ltd. Digital Camera with WLAN Manual 8
Ricoh >
Contents
Manual 8
L7360874_En_00_0_bookfile.book Page 181 Friday, October 13, 2006 12:56 PM Obtaining GPS Information This section explains how to connect the camera to the Bluetooth® GPS unit to receive GPS information using a SPP. There are two ways to connect the devices. • Manually connect to a device (GP.181) • Automatically connect to a previously connected device (GP.183) Manually Connecting to a Device (BT SERIAL) Display the Expanded Settings menu. • For the operating procedure, see P.155. Press the " button to select [BT SERIAL] and press the $ button. Press the #$ buttons to select [YES] and then press the MENU/OK button. • The camera begins searching for a Bluetooth® GPS unit and a list of destination devices appears when the search is completed. • By default, up to five devices can be discovered, but you can change this to search for any number of devices between one and ten. (GP.176) Using the GPS Function • When the Bluetooth® function is used for the first time, a screen appears confirming whether to search for a destination device. • If you have already searched for a destination device, a list of destination devices appears. Go to Step 4. • If the camera is connected using a wireless LAN connection, a screen appears confirming whether to disconnect the wireless LAN connection. Select [YES] and press the MENU/OK button, and go to Step 3 or Step 4. (Only for Caplio 500SE-W) 181 L7360874_En_00_0_bookfile.book Page 182 Friday, October 13, 2006 12:56 PM Press the !" buttons to select the desired destination device. • If the desired destination device is not listed, press the ADJ. button to search for a Bluetooth® GPS unit in your vicinity. • Select a destination device and press the $ button to display information about the destination device. • To delete a destination device from the list, select the device and press the D (Delete) button. Using the GPS Function 182 Press the MENU/OK button. • The connection status appears. Pressing the DISP. button cancels the operation. • If a passkey is required to connect to the destination device, a message appears prompting you to enter the passkey. (GP.162) • If the connection fails, an error message appears and then the shooting screen appears. For details about the error messages, see P.222. • When a connection is established to a Bluetooth® GPS unit, the Bluetooth® antenna icon, GPS information and GPS antenna icon appear on the shooting screen. Note ---------------------------------------------------------------------------------------------The most recently connected destination device appears at the top of the list of destination devices. Disconnecting serial connection after manually connecting to a device ----------------------------------------------Turn the camera off to disconnect serial connection. L7360874_En_00_0_bookfile.book Page 183 Friday, October 13, 2006 12:56 PM Automatically Connecting to a Previously Connected Device (BT AUTO CONN) When [BT AUTO CONN] on the Expanded Settings menu is set to [ON], the next time the camera is turned on, the camera automatically searches for and connects to the previously connected Bluetooth® GPS unit. This is convenient if you want to use the same Bluetooth® GPS unit to which your camera previously connected. Set [BT AUTO CONN] to [ON]. Display the Expanded Settings menu. • For the operating procedure, see P.155. • For Caplio 500SE-W, check that [CHANGE COM] is set to [BT] on the Expanded Settings menu. (GP.193) Press the " button to select [BT AUTO CONN] and press the $ button. Press the !" buttons to select [ON]. Press the MENU/OK button, or # button and press the MENU/ OK button. Note ---------------------------------------------------------------------------------------------• To automatically connect to a previously connected device after setting this function, turn off the camera and then turn it on again. The camera automatically connects to the previously connected Bluetooth® GPS unit. • If the previously connected device is not detected (GP.154) or [CHANGE COM] is set to [W-LAN] (only for Caplio 500SE-W) (GP.193), no connection is established even if [BT AUTO CONN] is set to [ON]. • Use this function for a Bluetooth® GPS unit only. Using the GPS Function 183 L7360874_En_00_0_bookfile.book Page 184 Friday, October 13, 2006 12:56 PM Automatically Establishing a Connection Check that the Bluetooth® GPS unit is turned on. Turn the camera power on. • The camera attempts to automatically connect to the device and the connection status appears. Pressing the DISP. button cancels the operation. • If a passkey is required to connect to the destination device, a message appears prompting you to enter the passkey. (GP.162) • If the connection fails, an error message appears and then the shooting screen appears. For details about the error messages, see P.222. • When a connection is established to a Bluetooth® GPS unit, the Bluetooth® antenna icon, GPS information and GPS antenna icon appear on the shooting screen. Using the GPS Function 184 Disconnecting serial connection after automatically connecting to a device -----------------------------------------------In the Expanded Settings menu, set [BT AUTO CONN] to [OFF] (GP.183) and turn off to disconnect serial connection. Automatic connection will not be performed when the camera is turned on again. Note ---------------------------------------------------------------------------------------------To send files while connected to a Bluetooth® GPS unit, you must disconnect the serial connection. Select [PRINT] (GP.157) or [FILE SEND] (GP.166, P.209) on the Playback Setting menu to display the screen confirming whether to disconnect the serial connection. Select [YES] and press the MENU/OK button to disconnect the serial connection. L7360874_En_00_0_bookfile.book Page 185 Friday, October 13, 2006 12:56 PM Displaying GPS Information When the camera is connected to a Bluetooth® GPS unit in shooting mode, the Bluetooth® antenna icon, GPS information and GPS icon appear on the LCD monitor. x3(4) Number of visible satellites captured at the current position Number of satellites used GPS positioning quality Display no fix 2d 3d Diff Contents The GPS unit cannot receive data. The NMEA-0183 format GSA positioning mode is 2d. The NMEA-0183 format GSA positioning mode is 3d. The NMEA-0183 format GGA quality is DGPS. Retaining GPS information--------------------------------------------------------------• The latest GPS information is retained in the camera for ten minutes. This enables you to acquire GPS information outdoors and then shoot images indoors using the GPS information. • If the GPS datum setup is changed (GP.188), GPS information is erased within ten minutes. Using the GPS Function If the number of receivable satellites is less than three, the GPS information cannot be acquired. If the GPS information cannot be acquired, the display of the GPS icon changes. In some cases, positioning may take time. 185 L7360874_En_00_0_bookfile.book Page 186 Friday, October 13, 2006 12:56 PM LCD Monitor Display When the shooting screen switches to GPS display, the current GPS detailed information is displayed. At shooting, the latitude and longitude displayed on the LCD monitor are recorded as part of the image information. You can change the display when playing back still images with GPS information. When using the GPS display, the latitude and longitude recorded with the still images appear. The LCD monitor display can be switched using the DISP. button. Shooting Mode Normal symbol display Using the GPS Function 186 GPS display LCD monitor off (synchro-monitor mode) Grid guide display No display Playback Mode Normal symbol display Normal symbol display and GPS display No display L7360874_En_00_0_bookfile.book Page 187 Friday, October 13, 2006 12:56 PM Shooting with GPS Information You can shoot still images with GPS information. You can also shoot images with GPS information while using scene mode (except for TEXT MODE) or Multi-shot. With the GPS function enabled, turn the Mode Dial to 5/K. Check that the GPS information or GPS icon appears on the LCD monitor. (GP.186) • To check the current GPS detailed information, press the DISP. button to switch to the GPS display. Press the shutter release button to shoot the picture. When a still image with GPS information is played back (GP.186), its GPS information is also displayed. Using the GPS Function Playing Back a Still Image with GPS Information Note ---------------------------------------------------------------------------------------------• If the GPS information attached to the image is not what was acquired at shooting but is from the camera memory (GP.185), the latitude and longitude are displayed in orange. • You can send a still image with GPS Information. (GP.184) 187 L7360874_En_00_0_bookfile.book Page 188 Friday, October 13, 2006 12:56 PM Advanced GPS Information Settings Setting the Datum (GPS DATUM) You can set the GPS information datum. Available Settings TOKYO (Standard datum used in Japan) WGS-84 (World geodetic system) *Default setting Display the Expanded Settings menu. • For the operating procedure, see P.155. Using the GPS Function 188 Press the " button to select [GPS DATUM] and press the $ button. Press the !" buttons to select the desired setting. Press the MENU/OK button, or # button and press the MENU/ OK button. L7360874_En_00_0_bookfile.book Page 189 Friday, October 13, 2006 12:56 PM Setting the Display Standard (GPS DISP MODE) You can set the standard of the GPS information displayed on the monitor. Available Settings LAT/LON (Displays latitude and longitude) *Default setting UTM (Displays Universal Transverse Mercator Projection (UTM) coordinates.) MGRS (Displays Military Grid Reference System (MGRS) coordinates.) ALL (Displays all information above) Display the Expanded Settings menu. • For the operating procedure, see P.155. Press the " button to select [GPS DISP MODE] and press the $ button. Press the !" buttons to select the desired setting. Press the MENU/OK button, or # button and press the MENU/ OK button. Using the GPS Function 189 L7360874_En_00_0_bookfile.book Page 190 Friday, October 13, 2006 12:56 PM Locking the GPS Information (GPS LOCK) You can set up the Q (Quick Review) button to use when locking GPS information. When GPS information is locked, new GPS information cannot be acquired. Available Settings OFF (Q button cannot be used to lock GPS information.) *Default setting ON (Q button can be used to lock GPS information.) Display the Expanded Settings menu. • For the operating procedure, see P.155. Using the GPS Function 190 Press the " button to select [GPS LOCK] and press the $ button. Press the !" buttons to select [ON]. Press the MENU/OK button, or # button and press the MENU/ OK button. Note ---------------------------------------------------------------------------------------------• When this function is set to [ON], you cannot use the Q (Quick Review) button for the quick review function. • Once this function is set to [ON], press the Q (Quick Review) button on the shooting screen to lock the GPS information. A symbol appears on the screen. L7360874_En_00_0_bookfile.book Page 191 Friday, October 13, 2006 12:56 PM 10 Using the Wireless LAN Function (Only for Caplio 500SE-W) About the Wireless LAN Function You can use the wireless LAN function to send still pictures (including text mode still images), movies, and sound files. There are two ways to send files using the wireless LAN function. • Send files via e-mail You can attach a file to an e-mail and send it to an e-mail address registered in the communication list. You cannot enter a mail message. • Send files via FTP You can use File Transfer Protocol (FTP) to send a file to an FTP server registered in the communication list. If there is no FTP server, you can set your computer as a Caplio server (Caplioonly FTP server). (GP.199) Caution-----------------------------------------------------------------------------------------• Wireless LAN-enabled devices can connect at a maximum range of about 30 meters (100 feet). Keep the line-of-sight distance between the destination wireless LAN device and the camera within about 30 meters (100 feet). • The provided Caplio Setting software must be installed to use the wireless LAN function. Caplio Setting can only be installed on Windows. Note ---------------------------------------------------------------------------------------------• You cannot use the wireless LAN function to send files to a printer. To send files to a printer, use the Bluetooth® function. (GP.157) • Be careful not to obstruct the wireless LAN antenna with your fingers when connected. Using the Wireless LAN Function (Only for Caplio 500SE-W) Caplio 500SE-W is equipped with Bluetooth® and wireless LAN functions to enable connection to other devices. To connect to a wireless device, you must set the Expanded Settings menu to the wireless LAN or Bluetooth® function setting beforehand. (GP.193) 10 Wireless LAN antenna 191 L7360874_En_00_0_bookfile.book Page 192 Friday, October 13, 2006 12:56 PM Overview of Transfer Process via a Wireless LAN 1 Make advanced file transfer settings. (GP.194) Use the provided Caplio Setting software to make advanced settings for sending files via wireless LAN. If no FTP server is available, set up your computer to be the Caplio server before making the advanced settings. (Only for sending via FTP) (GP.199) Using the Wireless LAN Function (Only for Caplio 500SE-W) 10 192 2 Create a communication list. (GP.202) Create a communication list combining the desired settings made in Step 1. Computer settings using the provided Caplio Setting software 3 Transfer the communication list from the camera to the computer. (GP.202) Connect the computer to the camera using the provided USB cable and transfer the communication list to the internal memory of the camera. You can also use the SD memory card to import the communication list to the camera. (GP.205) You can also correct the destination setting on the camera. (GP.207) 4 Send files. Use the Expanded Settings menu on the camera to set the communication method to wireless LAN (GP.193), and send the files from the camera. There are two ways to send files. • FILE SEND (GP.209) Select and send files in playback mode. • QUICK SEND MODE (GP.214) Immediately after you shoot a still image, you can send that file to another device. When sending files, you can use the [SEND TO] screen displayed at the time of sending the files to specify the destination, or you can use the Expanded Settings menu to specify the destination beforehand. (GP.219) L7360874_En_00_0_bookfile.book Page 193 Friday, October 13, 2006 12:56 PM Selecting the Communication Method (CHANGE COM) Before sending files from the camera, set whether to connect the camera to the destination by wireless LAN or Bluetooth®. Available Settings W-LAN (connect via wireless LAN) *Default setting BT (connect via Bluetooth®) Display the Expanded Settings menu. • For the operating procedure, see P.155. Press the " button to select [CHANGE COM] and press the $ button. Press the !" buttons to select the desired setting. Press the MENU/OK button, or press the # button and then the MENU/OK button. Using the Wireless LAN Function (Only for Caplio 500SE-W) 10 193 L7360874_En_00_0_bookfile.book Page 194 Friday, October 13, 2006 12:56 PM Making Advanced Wireless LAN Settings for Sending Files To send files by wireless LAN, you must use the computer to create a communication list registering the advanced settings for sending files, and then transfer the communication list to the camera. Use the provided Caplio Setting software to make the settings. Using the Wireless LAN Function (Only for Caplio 500SE-W) 10 194 Install Caplio Setting from the provided Caplio Software CD-ROM. • For the operating procedure, see P.134. On the [Start] menu, point to [All Programs] or [Programs], point to [Caplio Software], and then click [Caplio Setting]. • Caplio Setting is activated and the [Caplio Setting] screen appears. Click the [All Detailed Setups] button. • The [Detailed Setups for selections] screen appears. Click the tab with the settings you want to make. L7360874_En_00_0_bookfile.book Page 195 Friday, October 13, 2006 12:56 PM • The settings for the Detailed Setups tabs are as shown below. Detailed Setups tab Network Wireless LAN Dial-up FTP Send Mail Config. Address Book Settings IP address and other settings (Send via Mail, Send via FTP) Wireless LAN settings (Send via Mail, Send via FTP) This camera is not configured for a dial-up connection, so this setting is not required. Destination FTP server name and other settings (Send via FTP) Destination SMTP server name and other settings (Send via Mail) Destination mail address settings (Send via Mail) • If there is no FTP server, you can set your computer as a Caplio server and specify the destination for sending via FTP. (GP.199) • You can also make the advanced settings for each individual setting by clicking the [Detail] button to the right of the setting on the [Caplio Setting] screen. Click the [Add] button under the [Setup Name] list. • The [New Name for the Setup] dialog box appears. Enter a setting name, and then click [OK]. Make the advanced settings. • For the available advanced settings, see P.196. • To delete a setting, select the setting you want to delete, and click the [Delete] button. • To rename a setting, select the setting you want to rename, click the [Rename] button, and enter the new setting name in the [New Name for the Setup] dialog box. To make other advanced settings, click the tab with the setting you want to make, and repeat Steps 5 to 7 above. Click [OK]. • The display returns to the [Caplio Setting] screen. Using the Wireless LAN Function (Only for Caplio 500SE-W) Note ---------------------------------------------------------------------------------------------- 10 Caution-----------------------------------------------------------------------------------------For details about the settings, consult your system administrator. Note ---------------------------------------------------------------------------------------------When [Apply] is clicked, the current setting is registered. 195 L7360874_En_00_0_bookfile.book Page 196 Friday, October 13, 2006 12:56 PM Detailed Setups Tab Settings [Network] tab Item Name Host Setup Description These settings are not required when using this camera. Host Name Camera Password Using the Wireless LAN Function (Only for Caplio 500SE-W) 10 196 Automatically retrieves its IP address Use the following IP address IP address Subnet Mask Default Gateway Select this to retrieve an IP address automatically for the camera. Select this to use a fixed IP address, and then enter the information below. [IP address] Fixed IP address for the camera [Subnet Mask] Usually enter 255.255.255.0. [Default Gateway] IP address of an Internet-connected computer Automatically retrieves the address from the DNS server Use the following DNS server addresses Primary DNS Server Secondary DNS Server Select this to retrieve the address automatically from the DNS server. Select this to use a fixed DNS server address, and then enter the information below. [Primary DNS Server] Primary DNS server address of your Internet service provider [Secondary DNS Server] Secondary DNS server address of your Internet service provider [Wireless LAN] tab Item Name Connection Method Description Select from the following connection methods. [Infrastructure] Connection method for communication through routers and access points [AdHoc] Connection method for communication between slave devices ESS-ID A wireless LAN enables communication between a master device and a slave device having the same ESS-ID. Enter the same ESS-ID as the master device. L7360874_En_00_0_bookfile.book Page 197 Friday, October 13, 2006 12:56 PM Item Name Communication Channel Description When several access points are in use, a channel is set to each access point. Select the channel of the access point. [Auto] Select this if [Connection Method] is set to [Infrastructure] and there is only one access point. [1-13] If [Connection Method] is set to [Infrastructure] and there are several access points or if [Connection Method] is set to [AdHoc], select the channel you want to use. Cryptography No encryption is used. [WEP] This can be selected when [Connection Method] is set to either [Infrastructure] or [AdHoc]. [AES] This can be selected only when [Connection Method] is set to [Infrastructure]. [TKIP] This can be selected only when [Connection Method] is set to [Infrastructure]. Network Key Enter the security key. Select a key type from [String] and [Hex] and enter an encryption key in the box. [String] When [Cryptography] is set to [WEP]: Enter an encryption key of 5 or 13 characters. Entering a 5-character string uses 40-bit encryption, and entering a 13-character string uses 128-bit encryption. When [Cryptography] is set to [AES] or [TKIP]: Enter an encryption key from 8 to 63 characters. [Hex] This can be selected only when [Cryptography] is set to [WEP]. Enter an encryption key with 10 or 26 digits. Entering a 10-digit string uses 40-bit encryption, and entering a 26digit string uses 128-bit encryption. Authentication [Open System] This can be selected only when [Cryptography] is set to [None] or [WEP]. This authentication does not use WEP keys. [Shared Key] This can be selected only when [Cryptography] is set to [None] or [WEP]. This authentication compares the WEP keys of different devices. Using the Wireless LAN Function (Only for Caplio 500SE-W) Select from the following encryption methods. [None] 10 [WPA-PSK] This can be selected only when [Cryptography] is set to [AES] or [TKIP]. [WPA2-PSK] This can be selected only when [Cryptography] is set to [AES] or [TKIP]. 197 L7360874_En_00_0_bookfile.book Page 198 Friday, October 13, 2006 12:56 PM [FTP Send] tab Item Name Server Name User Name and Password Specify Folder Using the Wireless LAN Function (Only for Caplio 500SE-W) 10 198 Does not send a file whose name already exists. Description Set the name and IP address of the destination FTP server to which to send files. If your computer is set as a Caplio server (GP.199), set the IP address of your computer. Set the user name (user ID) and password necessary for connecting to an FTP server. If your computer is set as a Caplio server (GP.199), this setting is not required. Set the destination folder name (inbox folder in the FTP server). Check this box to not send files with the same name to the destination folder. Do not check this box to send files with the same name to the destination folder. This setting is disabled when using a Caplio server (GP.199). In this case, files with the same name are renamed and saved to the destination folder. (GP.201) [Mail Config.] tab Item Name Server Name User Name and Password From Address Description Set the name of the SMTP server (outgoing mail server) of your Internet service provider. Set the user name (user ID) and password necessary for connecting to your Internet service provider. Enter the mail-from (your) address. [Address Book] tab Item Name E-mail Address Description Enter the destination address. Note ---------------------------------------------------------------------------------------------This camera is not configured for dial-up connection, so settings in the [Dial-up] tab are not required. L7360874_En_00_0_bookfile.book Page 199 Friday, October 13, 2006 12:56 PM Setting Up a Caplio-only FTP Server If you do not have access to an FTP server, you can use the provided Caplio Server software to set up your computer as a Caplio server (Caplio-only FTP server). This setup is not necessary to send files to an FTP server already configured on your computer. Caution------------------------------------------------------------------------------------------ Install Caplio Setting from the provided Caplio Software CD-ROM. • For the operating procedure, see P.134. On the [Start] menu, point to [All Programs] or [Programs], point to [Caplio Software], and then click [Caplio Server]. • Caplio Server is activated and the [Caplio Server] screen appears. Select an inbox folder specification method in the [Specify] field. Item Name Server Server+Camera Description Specify the inbox folder in [Folder name] box. The following are inbox folders. Using the Wireless LAN Function (Only for Caplio 500SE-W) • The FTP server set by using Caplio Server permits FTP connection from this camera only. Other FTP clients cannot access this server. • Files cannot be sent from the FTP server to the camera. 10 Folder specified by [Folder name] Folder specified with the camera(*) Camera Specify the inbox folder on the camera.(*) 199 L7360874_En_00_0_bookfile.book Page 200 Friday, October 13, 2006 12:56 PM () * The folder set in [Specify Folder] on the [FTP Send] tab (GP.198) is the inbox folder. Using the Wireless LAN Function (Only for Caplio 500SE-W) 10 200 Note ---------------------------------------------------------------------------------------------The inbox folder is not created automatically. Create a folder with the same name as the specified folder. When [Server] or [Server+Camera] is selected in Step 3, specify the inbox folder in the [Folder name] box. • Click the folder icon to display a dialog box. You can select and specify a folder here. When necessary, specify a log file name in the [Log file name] box. • If a log file name is specified, a connection status log file is created. If not, no log file is created. • Specify a full path for the log file name. • Click the folder icon to display a dialog box. You can select and specify the folder name here. Click [Apply]. • This completes the setup. Click [Quit]. • Caplio Server closes. L7360874_En_00_0_bookfile.book Page 201 Friday, October 13, 2006 12:56 PM Using the Caplio Server To send files from the camera to an FTP server, you must register the set FTP server to the communication list, and then transfer the communication list to the camera (GP.202). When using a Caplio server, after sending the communication list to the camera, follow the procedure below to use the FTP server. • Caplio Server is activated and the [Caplio Server] screen appears. Click [Start]. • The FTP server is activated and becomes ready to receive images from the camera. • To hide the [Caplio Server] screen, click the [Hide] button. The screen is hidden and its icon is displayed on the taskbar. To display the screen again, click the icon on the taskbar. Send files from the camera. • For the procedure for sending files, see P.209 or P.214. • The [Caplio Server] screen displays the communication status in the [Connections] box. • The files are saved in the specified inbox folder (GP.199). Note ---------------------------------------------------------------------------------------------If the inbox folder already has a file of the same file name, the file being sent is renamed by appending a serial number from 001 to 999 and saved to the inbox folder. If the same file number with a serial number from 001 to 999 already exists in the inbox folder, the file is overwritten. Using the Wireless LAN Function (Only for Caplio 500SE-W) On the [Start] menu, point to [All Programs] or [Programs], point to [Caplio Software], and then click [Caplio Server]. 10 201 L7360874_En_00_0_bookfile.book Page 202 Friday, October 13, 2006 12:56 PM Creating a Communication List and Transferring it to the Camera After completing the advanced settings on the [Detailed Setups for selections] screen, create a communication list combining the desired settings and transfer it to the camera via the supplied USB cable. Caution-----------------------------------------------------------------------------------------Using the Wireless LAN Function (Only for Caplio 500SE-W) 10 [USB CONNECTION] must be set to [ORIGINAL] on the camera's SETUP menu. (GP.123) Note ---------------------------------------------------------------------------------------------You can also save the communication list on the computer, copy it to an SD memory card, and import it into the camera. (GP.205) If Caplio Setting is not active, on the [Start] menu, point to [All Programs] or [Programs], point to [Caplio Software], and then click [Caplio Setting]. • Caplio Setting is activated and the [Caplio Setting] screen appears. Click the [Add] button under the [Setup Name] list. • The [New Name for the Setup] dialog box appears. Enter a setting name, and then click [OK]. Select [Wireless LAN] in the [Connection Method] field, and then select the desired wireless LAN setting from the pull-down menu. • The settings registered on the Detailed Setups [Wireless LAN] tab are displayed. Select the desired network setting from the [Network Setup] pull-down menu. • The settings registered on the Detailed Setups [Network] tab are displayed. 202 L7360874_En_00_0_bookfile.book Page 203 Friday, October 13, 2006 12:56 PM Select either [Send via FTP] or [Send via Mail] in the [Send Method] field. Select the desired Send via FTP setting or Mail Config. setting from the pull-down menu. • The settings registered on the Detailed Setups [FTP Send] or [Mail Config.] tab are displayed. • The settings registered on the Detailed Setups [Address Book] tab are displayed. To create another communication setting, repeat Steps 2 to 8. • To delete a communication setting, select the setting you want to delete, and click the [Delete] button. • To rename a communication setting, select the setting you want to rename, click the [Rename] button, and enter the new setting name in the [New Name for the Setup] dialog box. • To edit a communication setting, select the setting you want to edit and edit the setting. 10 11 12 Click [Apply]. 13 Connect the USB cable to the USB terminal on your camera. Make sure that the camera is off. Connect the provided USB cable to a USB port on your computer. • Your camera turns on. Using the Wireless LAN Function (Only for Caplio 500SE-W) If [Send via Mail] is selected in Step 6, select the desired address book setting from the [To Address] pull-down menu. 10 203 L7360874_En_00_0_bookfile.book Page 204 Friday, October 13, 2006 12:56 PM 14 Using the Wireless LAN Function (Only for Caplio 500SE-W) 10 204 Click [Transfer to Camera]. • A screen appears confirming whether to update the information set in the camera. Click [Yes] to update the information. Click [No] to cancel the update. • After Step 10, if [Transfer to Camera] is clicked without clicking [Apply], a message appears confirming whether to save the edited setting. Click [OK] to save the edited setting. Click [No] to cancel the transfer of the communication list. • Transfer of the communication list begins, and once the transfer is completed, a message indicating this appears. 15 16 Click [OK] on the message box. Click [OK] on the [Caplio Setting] screen. • Caplio Setting closes. Note -----------------------------------------------------------------------------------The settings made on the [Caplio Setting] screen (Detailed Setups and Communication List settings) are saved regardless of whether or not they are transferred to the camera or saved on the computer. When Caplio Setting is restarted, the last settings used are displayed. 17 Turn off the camera and disconnect the USB cable from the camera and computer. • For disconnecting the USB cable, see P.153. L7360874_En_00_0_bookfile.book Page 205 Friday, October 13, 2006 12:56 PM Importing a Communication List from an SD Memory Card (READ COM SETTING) You can save the communication list on the computer, copy it to an SD memory card, and import it into the camera. Caution-----------------------------------------------------------------------------------------Use an SD memory card formatted with this camera. • The [Browse for Folder] dialog box appears. Select the folder to which to save the communication list, and click [OK]. • Once the communication list is saved, a message indicating this appears. • The communication list is saved with the file name “SYSTEM.PRM”. Click [OK] on the message box. Click [OK] on the [Caplio Setting] screen. • Caplio Setting closes. Use a PC card slot or card reader to copy the communication list (“SYSTEM.PRM”) to the SYSTEM folder on the SD memory card. Load the SD memory card with the copied communication list into the camera. Turn on the camera to display the Expanded Settings menu. Using the Wireless LAN Function (Only for Caplio 500SE-W) Create a communication list (GP.202 Steps 1 to 9), and click [Save in File]. 10 • For the operating procedure, see P.155. 205 L7360874_En_00_0_bookfile.book Page 206 Friday, October 13, 2006 12:56 PM Press the " button to select [READ COM SETTING], and then press the $ button. • A screen appears confirming whether to import the communication list. Using the Wireless LAN Function (Only for Caplio 500SE-W) 10 206 Press the $ button to select [YES] and then press the MENU/OK button. • If a communication list has already been imported, a screen appears confirming whether to overwrite the communication list. To overwrite the communication list, select [Yes]. Selecting [No] cancels importing and returns to the Expanded Settings menu. • The communication list is imported from the SD memory card into the camera and the display returns to the Expanded Settings menu. 10 Press the MENU/OK button. Caution-----------------------------------------------------------------------------------------Only one communication list can be imported from the SD memory card into the camera. Note ---------------------------------------------------------------------------------------------A communication list can also be transferred from the computer to the camera by using the USB cable. (GP.202) L7360874_En_00_0_bookfile.book Page 207 Friday, October 13, 2006 12:56 PM Confirming and Editing the Destination Setting on the Camera You can use the camera to confirm and edit the settings of the communication list transferred to the camera. Turn on the camera to display the Expanded Settings menu. • For the operating procedure, see P.155. Press the " button to select [SEND TO] and press the $ button. • A screen appears with a list of destinations set on the communication list. Press the !" buttons to select the destination with the setting you want to edit, and press the $ button. • The setup category of the selected destination is displayed. Press the !" buttons to select the setup category with the setting you want to edit, and press the $ button. • The setting of the selected destination is displayed. Press the !" buttons to select the setting you want to edit, and press the $ button. Using the Wireless LAN Function (Only for Caplio 500SE-W) 10 • The selection screen or keyboard screen appears. 207 L7360874_En_00_0_bookfile.book Page 208 Friday, October 13, 2006 12:56 PM Change the setting. • Only alphanumeric characters can be entered with the keyboard screen. For information on how to use the keyboard, see P.163. After completing changes, press the MENU/OK button. • The display returns to the settings display screen. • To edit other settings, repeat Steps 5 to 7. Press the DISP. button. • The display returns to the setup category display screen. • To edit other setup categories, repeat Steps 4 to 8. Using the Wireless LAN Function (Only for Caplio 500SE-W) 10 208 Press the DISP. button. • The display returns to the [SEND TO] screen. • To edit other destinations, repeat Steps 3 to 9. 10 After completing changes, press the MENU/OK button. • The display returns to the Expanded Settings menu. 11 Press the MENU/OK button. Caution-----------------------------------------------------------------------------------------• In Caplio Setting, if the [Cryptography]/[Authentication] on the [Wireless LAN] tab are set as follows (GP.196), [Cryptography/Authentication] is automatically set to [OFF/OPEN] when [Connection Method] in [W/LESS LAN] is set to [AD-HOC]. [AES]/[WPA-PSK], [AES]/[WPA2-PSK], [TKIP]/[WPA-PSK], [TKIP]/[WPA2-PSK] • When [Cryptography/Authentication] in [W/LESS LAN] is changed on the camera, check the network key. (GP.197) • If [Cryptography/Authentication] is set to [WEP/OPEN] or [WEP/SHARED], enter the [Network Key] as below. [String]: Five characters or 13 characters [Hex]: Ten characters or 26 characters • If [Cryptography/Authentication] is set to [AES/WPA-PSK], [AES/WPA2-PSK], [TKIP/ WPA-PSK], or [TKIP/WPA2-PSK], enter an 8 to 63 character network key. L7360874_En_00_0_bookfile.book Page 209 Friday, October 13, 2006 12:56 PM Sending Still Images, Movies, and Sound Files (FILE SEND) Caution-----------------------------------------------------------------------------------------Before sending files, create a communication list on the computer and transfer it to the camera. (GP.202) Note ---------------------------------------------------------------------------------------------• You can set the file size of the image beforehand. (GP.178) • When sending files, you can use the [SEND TO] screen displayed at the time of sending the files to specify the destination, or you can also use the Expanded Settings menu to specify the destination beforehand. (GP.219) • For information about setting your computer to receive images, see the documentation that came with the computer. Using the Wireless LAN Function (Only for Caplio 500SE-W) You can send still pictures (including text mode still images), movies, and sound files from the camera. The sent files are processed according to the computer settings. Files are sent from the internal memory when no SD memory card is loaded or from an SD memory card when installed. There are three ways to send files. • Send one file (GP.210) • Send all files from the camera (GP.210) • Select and send several files (GP.212) 10 209 L7360874_En_00_0_bookfile.book Page 210 Friday, October 13, 2006 12:56 PM Sending One or All Files Check that the destination device (computer) is turned on. Press the 6 (Playback) button. • Check that [CHANGE COM] is set to [W-LAN] on the Expanded Settings menu. (P.193) • To send all files, go to Step 4. Using the Wireless LAN Function (Only for Caplio 500SE-W) 10 210 Press the #$ buttons to select a file to send. Press the MENU/OK button. • The Playback Setting menu appears. Press the " button to select [FILE SEND] and press the $ button. • If [SEND CONDITION] is set to [ON], the [SEND TO] screen appears. • If [SEND CONDITION] is set to [OFF] (GP.219), go to Step 7. • If the communication list has not been transferred, or if [SEND CONDITION] is set to [OFF] (GP.219) and the destination setting is incorrect, an error message appears and the display returns to the Playback Setting menu. • If the camera is connected using a serial connection, a screen appears confirming whether to disconnect the serial connection. Select [YES] and press the MENU/OK button. Press the !" buttons to select the desired destination device and then press the MENU/OK button.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2006:11:06 18:34:31+09:00 Create Date : 2006:11:06 18:34:17+09:00 Title : Author : Creator : PScript5.dll Version 5.2 Producer : Acrobat Distiller 5.0.5 (Windows) Page Count : 30 Mod Date : 2006:11:06 18:34:31+09:00 Creation Date : 2006:11:06 18:34:17+09:00 Metadata Date : 2006:11:06 18:34:31+09:00 Has XFA : NoEXIF Metadata provided by EXIF.tools