| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1665388 |
| Application ID | Z0bHM6b7wnsYEMvwuP7Etw== |
| Document Description | 08 user guide |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 102.62kB (1282809 bits) |
| Date Submitted | 2012-03-29 00:00:00 |
| Date Available | 2012-03-29 00:00:00 |
| Creation Date | 2012-03-22 15:16:21 |
| Producing Software | GPL Ghostscript 8.63 |
| Document Lastmod | 2012-03-27 11:11:23 |
| Document Title | No Job Name |
| Document Creator | XyEnterprise XPP 8.3C.1 SP #2 |
JOBNAME: No Job Name PAGE: 231 SESS: 5 OUTPUT: Thu Mar 22 15:15:24 2012 SUM: 4C74EEC4
/nissan_pdm/nissancims/owners/asd/og
ENTITY=WK0141
● Keep the antenna wire more than 8 in
(20 cm) away from the electronic control system harnesses. Do not route the
antenna wire next to any harness.
ENTITY=WA0050
● Adjust the antenna standing-wave ratio
as recommended by the manufacturer.
ENTITY=WC0050
● Connect the ground wire from the CB
radio chassis to the body.
ENTITY=WF0140
● For details, consult a NISSAN dealer.
BLUETOOTHT HANDS-FREE PHONE
SYSTEM WITHOUT NAVIGATION
SYSTEM
(Type A) (if so equipped)
module=
COM_BT-GEN3-INTRO.13ALT
itdseq=525
ENTITY=WU0242
WARNING
● Use a phone after stopping your vehicle
in a safe location. If you have to use a
phone while driving, exercise extreme
caution at all times so full attention may
be given to vehicle operation.
ENTITY=WI0877
● If you are unable to devote full attention
to vehicle operation while talking on
the phone, pull off the road to a safe
location and stop your vehicle.
CAUTION
To avoid discharging the vehicle battery,
use a phone after starting the engine.
Monitor, climate, audio, phone and voice recognition systems 4-69
Z REVIEW COPY—2013 Altima Sedan (asd)
Owners Manual (owners)—USA_English (nna)
03/22/12—root X
JOBNAME: No Job Name PAGE: 232 SESS: 5 OUTPUT: Thu Mar 22 15:15:24 2012 SUM: 2ABEA9EC
/nissan_pdm/nissancims/owners/asd/og
art=lha2289
TRANSLATE
phone module when the ignition switch is placed
in the ON position with the previously connected
cellular phone turned on and carried in the vehicle.
NOTE:
Some devices require the user to accept
connections to other BluetoothT devices. If
your phone does not connect automatically
to the system, consult the phone’s Owner’s
Manual for details on device operation.
You can connect up to 5 different BluetoothT
cellular phones to the in-vehicle phone module.
However, you can talk on only one cellular phone
at a time.
Before using the BluetoothT Hands-Free Phone
System, refer to the following notes.
● Set up the wireless connection between a
compatible cellular phone and the in-vehicle
phone module before using the hands-free
phone system.
LHA2289
Your NISSAN is equipped with the BluetoothT
Hands-Free Phone System. If you have a compatible BluetoothT enabled cellular phone, you
can set up the wireless connection between your
cellular phone and the in-vehicle phone module.
With BluetoothT wireless technology, you can
make or receive a hands-free telephone call with
your cellular phone in the vehicle.
Once your cellular phone is connected to the
in-vehicle phone module, no other phone connecting procedure is required. Your phone is
automatically connected with the in-vehicle
● Some BluetoothT enabled cellular phones
may not be recognized or work properly.
Please visit www.nissanusa.com/bluetooth
for a recommended phone list and connecting instructions.
● You will not be able to use a hands-free
phone under the following conditions:
4-70 Monitor, climate, audio, phone and voice recognition systems
Z REVIEW COPY—2013 Altima Sedan (asd)
Owners Manual (owners)—USA_English (nna)
03/22/12—root X
JOBNAME: No Job Name PAGE: 233 SESS: 5 OUTPUT: Thu Mar 22 15:15:24 2012 SUM: 58BE1778
/nissan_pdm/nissancims/owners/asd/og
– Your vehicle is outside of the cellular service area.
– Your vehicle is in an area where it is
difficult to receive a cellular signal; such
as in a tunnel, in an underground parking
garage, near a tall building or in a mountainous area.
– Your cellular phone is locked to prevent it
from being dialed.
● If the hands-free phone system seems to be
malfunctioning, see “Troubleshooting guide”
in this section. You can also visit
www.nissanusa.com/bluetooth for troubleshooting help.
● Some cellular phones or other devices may
cause interference or a buzzing noise to
come from the audio system speakers. Storing the device in a different location may
reduce or eliminate the noise.
IC Regulatory information
– Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may
cause undesired operation of the device.
– This Class B digital apparatus meets all requirements of the Canadian InterferenceCausing Equipment Regulations.
● Refer to the cellular phone Owner’s Manual
● When the radio wave condition is not ideal
regarding the telephone charges, cellular
or ambient sound is too loud, it may be
phone antenna and body, etc.
difficult to hear the other person’s voice durmodule=COM_BT-GEN3-REGULATORY-INFO itdseq=526
ing a call.
● Do not place the cellular phone in an area
surrounded by metal or far away from the
in-vehicle phone module to prevent tone
quality degradation and wireless connection
disruption.
● While a cellular phone is connected through
the BluetoothT wireless connection, the battery power of the cellular phone may discharge quicker than usual. The BluetoothT
Hands-Free Phone System cannot charge
cellular phones.
BLUETOOTHt is a
trademark owned by
Bluetooth SIG, Inc.
REGULATORY INFORMATION
and licensed to VisFCC Regulatory information
teon.
– CAUTION: To maintain compliance with module=COM_BT-GEN3-USE itdseq=527
USING THE SYSTEM
FCC’s RF exposure guidelines, use only the
supplied antenna. Unauthorized antenna,
modification, or attachments could damage
the transmitter and may violate FCC regulations.
The NISSAN Voice Recognition system allows
hands-free operation of the BluetoothT Phone
System.
– Operation is subject to the following two conditions:
If the vehicle is in motion, some commands may
not be available so full attention may be given to
vehicle operation.
1. This device may not cause interference and module=COM_BT-GEN3-INITIALIZATION
2. this device must accept any interference,
including interference that may cause undesired operation of the device.
Initialization
itdseq=528
When the ignition switch is placed in the ON
position, NISSAN Voice Recognition is initialized,
Monitor, climate, audio, phone and voice recognition systems 4-71
Z REVIEW COPY—2013 Altima Sedan (asd)
Owners Manual (owners)—USA_English (nna)
03/22/12—root X
JOBNAME: No Job Name PAGE: 234 SESS: 5 OUTPUT: Thu Mar 22 15:15:24 2012 SUM: 50D30EEE
/nissan_pdm/nissancims/owners/asd/og
which takes a few seconds. If the
button is
pressed before the initialization completes, the
system will announce “Hands-free phone system
not ready” and will not react to voice commands.
module=COM_BT-GEN3-OP-TIPS
Operating tips
itdseq=529
To get the best performance out of the NISSAN
Voice Recognition system, observe the following:
● Keep the interior of the vehicle as quiet as
possible. Close the windows to eliminate
surrounding noises (traffic noises, vibration
sounds, etc.), which may prevent the system
from recognizing voice commands correctly.
● Wait until the tone sounds before speaking a
command. Otherwise, the command will not
be received properly.
The command given is picked up by the microphone, and voice feedback is given when the
command is accepted.
● If you need to hear the available commands
for the current menu again, say “Help” and
the system will repeat them.
● If a command is not recognized, the system
announces, “Command not recognized.
Please try again.” Make sure the command is
said exactly as prompted by the system and
repeat the command in a clear voice.
● If you want to adjust the volume of the voice
feedback, press the volume control switches
(+ or -) on the steering wheel while being
provided with feedback. You can also use
the radio volume control knob.
● In most cases you can interrupt the voice
feedback to speak the next command by
button on the steering
pressing the
wheel.
● To use the system faster, you may speak the
second level commands with the main menu
command on the main menu. For example,
press the
button and after the tone
say, “Call Redial.”
● If you want to go back to the previous command, you can say “Go back” or “Correction” any time the system is waiting for a module=COM_BT-GEN3-HTSN
How to say numbers
response.
● You can cancel a command when the system is waiting for a response by saying,
“Cancel” or “Quit.” The system announces
“Cancel” and ends the VR session. You can
● Speak in a natural voice without pausing
button on the
also press and hold the
between words.
module=COM_BT-GEN3-GIVE-VOICE.13ALT itdseq=530 steering wheel for 5 seconds at any time to
Giving voice commands
end the VR session. Whenever the VR session is cancelled, a double beep is played to
To operate NISSAN Voice Recognition, press
indicate you have exited the system.
and release the
button located on the
steering wheel. After the tone sounds, speak a
command.
● Start speaking a command within 5 seconds
after the tone sounds.
itdseq=531
NISSAN Voice Recognition requires a certain
way to speak numbers in voice commands. Refer
to the following rules and examples.
● Either “zero” or “oh” can be used for “0”.
Example: 1-800-662-6200
– “One eight oh oh six six two six two oh
oh”, or
– “One eight zero zero six six two six two oh
oh”
● Words can be used for the first 4 digits
places only.
4-72 Monitor, climate, audio, phone and voice recognition systems
Z REVIEW COPY—2013 Altima Sedan (asd)
Owners Manual (owners)—USA_English (nna)
03/22/12—root X
JOBNAME: No Job Name PAGE: 235 SESS: 5 OUTPUT: Thu Mar 22 15:15:24 2012 SUM: 2E7485AD
/nissan_pdm/nissancims/owners/asd/og
Example: 1-800-662-6200
Example: 1-555-1212 *123
– “One eight hundred six six two six two oh
oh”,
– “One five five five one two one two star
one two three”
– NOT “One eight hundred six six two sixty
two hundred,” and
● Say “plus” for “+” (available only when using
the “Special Number” command).
– NOT “One eight oh oh six six two sixty two
hundred”
● Say “pause” for a 2-second pause (available
only when storing a phone book number).
● Numbers can be spoken in small groups.
The system will prompt you to continue entering digits, if desired.
Example: 1-800-662-6200
– “One eight zero zero”
The system repeats the numbers and
prompts you to enter more.
– “six six two”
The system repeats the numbers and
prompts you to enter more.
– “six two zero zero”
● Say “pound” for “#”. Say “star” for “*” (available when using the “Special Number” command and the “Send” command during a
call).
art=lha2273
NO TRANS
NOTE:
For best results, say phone numbers as
single digits.
The voice command “Help” is available at any
LHA2273
time. Please use the “Help” command to get module=COM_BT-GEN3-CTRL-BUTTONS.13
ALT
itdseq=5
information on how to use the system.
CONTROL BUTTONS
The control buttons for the BluetoothT HandsFree Phone System are located on the steering
wheel.
PHONE/SEND
button to initiate
Press the
a VR session or answer an incoming call.
See “List of voice commands” and “Special
number” in this section for more information.
Monitor, climate, audio, phone and voice recognition systems 4-73
Z REVIEW COPY—2013 Altima Sedan (asd)
Owners Manual (owners)—USA_English (nna)
03/22/12—root X
JOBNAME: No Job Name PAGE: 236 SESS: 5 OUTPUT: Thu Mar 22 15:15:24 2012 SUM: 4DCFD953
/nissan_pdm/nissancims/owners/asd/og
You can also use the
button
to interrupt the system feedback
and give a command at once. See
“List of voice commands” and
“During a call” in this section for
more information.
PHONE/END
While the Voice Recognition system is active, press and hold
button for 5 seconds to
the
quit the Voice Recognition system
at any time.
ENTER button / tuning switch
While using the Voice Recognition system, tilt the tuning switch
up or down to manually control
the phone system. Press the ENTER button to select an option on
the display screen.
module=COM_BT-GEN3-GET-STARTED
GETTING STARTED
itdseq=533
The following procedures will help you get
started using the BluetoothT Hands-Free Phone
System with NISSAN Voice Recognition. For additional command options, refer to “List of voice
commands” in this section.
module=COM_BT-GEN3-CHOOSE-LANG.13ALT
Choosing a language
To change the language, perform the following.
or
) up or down.
NOTE:
You must press the
button within 5
seconds to change the language.
5. If you decide not to change the language, do
not press either button. After 5 seconds, the
VR session will end, and the language will
not be changed.
button for more module=COM_BT-GEN3-PAIR-PROC
Connecting procedure
2. The system announces: “Press the
) button for the
PHONE/SEND (
hands-free phone system to enter the voice
adaptation mode or press the PHONE/END
) button to select a different language.”
3. Press the
switch (
itdseq=534
You can interact with the BluetoothT Hands-Free
Phone System using English, Spanish or French.
1. Press and hold the
than 5 seconds.
French). To select the current language,
) button. To
press the PHONE/SEND (
select a different language, tilt the tuning
button.
For information on voice adaptation, see
“Voice Adaptation (VA) mode” in this section.
4. The system announces the current language
and gives you the option to change the language to Spanish (in Spanish) or French (in
itdseq=535
NOTE:
The connecting procedure must be performed when the vehicle is stationary. If the
vehicle starts moving during the procedure,
the procedure will be cancelled.
Main Menu
“Connect phone” s
“Add phone” s
Initiate from handset s
Name phone s
4-74 Monitor, climate, audio, phone and voice recognition systems
Z REVIEW COPY—2013 Altima Sedan (asd)
Owners Manual (owners)—USA_English (nna)
03/22/12—root X
JOBNAME: No Job Name PAGE: 237 SESS: 5 OUTPUT: Thu Mar 22 15:15:24 2012 SUM: 49548C59
/nissan_pdm/nissancims/owners/asd/og
1. Press the
button on the steering
wheel. The system announces the available
commands.
A . The system ac2. Say: “Connect phone” s
knowledges the command and announces
the next set of available commands.
B . The system acknowl3. Say: “Add phone” s
edges the command and asks you to initiate
C.
connecting from the phone handset s
The connecting procedure of the cellular
phone varies according to each cellular
phone model. See the cellular phone Owner’s Manual for details. You can also visit
www.nissanusa.com/bluetooth for instructions on connecting NISSAN recommended
cellular phones.
When prompted for a Passkey code, enter
“1234” from the handset. The Passkey code
“1234” has been assigned by NISSAN and
cannot be changed.
4. The system asks you to say a name for the
D.
phone s
If the name is too long or too short, the
system tells you, then prompts you for a
name again.
Also, if more than one phone is connected
and the name sounds too much like a name
already used, the system tells you, then
prompts you for a name again.
MakingCOM
a call
entering a phone
module=
_BT-by
GEN3-MAKE-CALL
itdseq=536
number
Main Menu
“Call” s
“Phone Number” s
Speak the digits s
“Dial” s
1. Press the
button on the steering
wheel. A tone will sound.
ample, 555-121-3354 can be said as “five
five five” as the 1st group, then “one two
one” as the 2nd group, and “three three five
four” as the 3rd group. For dialing more than
10 digits or any special characters, say
“Special Number”. See “How to say numbers” in this section for more information.
5. When you have finished speaking the phone
number, the system repeats it back and announces the available commands.
D . The system acknowledges
6. Say: “Dial” s
the command and makes the call.
For additional command options, see “List of
voice commands” in this section.
2. Say: “Call” s. The system acknowledges module=COM_BT-GEN3-REC-CALL.13ALT itdseq=537
the command and announces the next set of
Receiving a call
available commands.
When you hear the ring tone, press the
B . The system ac3. Say “Phone Number” s
button on the steering wheel.
knowledges the command and announces
Once the call has ended, press the
button
the next set of available commands.
on the steering wheel.
Say: “Special Number” to dial more than 10
digits or any special characters.
NOTE:
4. Say the number you wish to call starting with
If you do not wish to take the call when you
C . If the
the area code in single digit format s
button
hear the ring tone, press the
system has trouble recognizing the correct
on the steering wheel.
phone number, try entering the number in
the following groups: 3-digit area code,
For additional command options, see “List of
3-digit prefix and the last 4-digits. For exvoice commands” later in this section.
Monitor, climate, audio, phone and voice recognition systems 4-75
Z REVIEW COPY—2013 Altima Sedan (asd)
Owners Manual (owners)—USA_English (nna)
03/22/12—root X
JOBNAME: No Job Name PAGE: 238 SESS: 5 OUTPUT: Thu Mar 22 15:15:24 2012 SUM: 5CE77E55
/nissan_pdm/nissancims/owners/asd/og
module=COM_BT-GEN3-VOICE-CMNDS itdseq=538module=COM_BT-GEN3-CALL
LIST OF VOICE COMMANDS
“Call”
Main Menu
“Call”
Main Menu
“Call”
“Phonebook”
(Speak name) s
“Recent Calls”
“Phone Number”
“Connect Phone”
itdseq=539
module=COM_BT-GEN3-CALL.NUMBER
(Speak Digits) s
itdseq=541
When prompted by the system, say the number
you wish to call. Refer to “How to say numbers”
and “Making a call by entering a phone number”
in this section for more details.
module=COM_BT-GEN3-CALL.SPECIAL
“Special Number” s
(Speak Digits) s
itdseq=542
For dialing more than 10 digits or any special
“Special Number” s
characters, say “Special Number”. When the
button on
When you press and release the
system acknowledges the command, the system
“Redial” s
the steering wheel, you can choose from the
will prompt you to speak the number.
commands on the Main Menu. The following
“Call Back” s
module=COM_BT-GEN3-CALL.REDIAL itdseq=543
pages describe these commands and the com- module=COM_BT-GEN3-CALL.NAME itdseq=540
“Redial” s
(Speak name) s
mands in each sub-menu.
Use the Redial command to call the last number
If you have stored entries in the phonebook, you
Remember to wait for the tone before
that was dialed.
can dial a number associated with a name and
speaking.
location.
The system acknowledges the command, reAfter the main menu, you can say “Help” to hear
peats the number and begins dialing.
See “Phonebook” in this section to learn how to
the list of commands currently available any time
store entries.
If a redial number does not exist, the system
the system is waiting for a response.
announces, “There is no number to redial” and
When
prompted
by
the
system,
say
the
name
of
If you want to end an action without completing it,
ends the VR session.
the phone book entry you wish to call. The system module=COM_BT-GEN3-CALL.BACK itdseq=544
you can say “Cancel” or “Quit” at any time the
acknowledges
the
name.
“Call Back” s
system is waiting for a response. The system will
end the VR session. Whenever the VR session is
If there are multiple locations associated with the
Use the Call Back command to dial the number of
cancelled, a double beep is played to indicate
name, the system asks you to choose the locathe last incoming call within the vehicle.
you have exited the system.
tion.
The system acknowledges the command, reIf you want to go back to the previous command,
Once you have confirmed the name and location,
peats the number and begins dialing.
you can say “Go back” or “Correction” any time
the system begins the call.
the system is waiting for a response.
4-76 Monitor, climate, audio, phone and voice recognition systems
Z REVIEW COPY—2013 Altima Sedan (asd)
Owners Manual (owners)—USA_English (nna)
03/22/12—root X
JOBNAME: No Job Name PAGE: 239 SESS: 5 OUTPUT: Thu Mar 22 15:15:24 2012 SUM: 419427D4
/nissan_pdm/nissancims/owners/asd/og
If a call back number does not exist, the system
announces, “There is no number to call back” and
ends the VR session.
module=COM_BT-GEN3-CALL.DURING
During a call
itdseq=545
During a call there are several command options
button on the steering
available. Press the
wheel to mute the receiving voice and enter commands.
● “Help” — The system announces the available commands.
● “Go back/Correction” — The system announces “Go back,” ends the VR session
and returns to the call.
● “Cancel/Quit” — The system announces
“Cancel,” ends the VR session and returns
to the call.
● “Send/Enter/Call/Dial” — Use the Send
command to enter numbers, “*” or “#” during
a call. For example, if you were directed to
dial an extension by an automated system:
Say: “Send one two three four.”
The system acknowledges the command
and sends the tones associated with the
numbers. The system then ends the VR session and returns to the call. Say “star” for “*”,
Say “pound” for “#”.
● “Transfer call” — Use the Transfer Call command to transfer the call from the BluetoothT
Hands-Free Phone System to the cellular
phone when privacy is desired.
The system announces, “Transfer call. Call
transferred to privacy mode.” The system
then ends the VR session.
NOTE:
If a call is ended or the cellular phone
network connection is lost while the Mute
feature is on, the Mute feature will be reset
to “off” for the next call so the other party
can hear your voice.
“Phonebook” (phones without
To reconnect the call from the cellular phone
automatic phonebook download
to the BluetoothT Hands-Free System, module=COM_BT-GEN3-PBOOK.WOPBAP
function)
press the
button.
● “Mute” — Use the Mute command to
mute your voice so the other party cannot hear it. Use the mute command
again to unmute your voice.
itdseq=546
NOTE:
The “Transfer Entry” command is not available when the vehicle is moving.
Main Menu
“Phonebook”
“Transfer Entry” s
“Delete Entry” s
“List Names” s
For phones that do not support automatic download of the phonebook (PBAP BluetoothT profile), the “Phonebook” command is used to manually add entries to the vehicle phonebook.
The phonebook stores up to 40 names for each
phone connected to the system.
Monitor, climate, audio, phone and voice recognition systems 4-77
Z REVIEW COPY—2013 Altima Sedan (asd)
Owners Manual (owners)—USA_English (nna)
03/22/12—root X
JOBNAME: No Job Name PAGE: 240 SESS: 5 OUTPUT: Thu Mar 22 15:15:24 2012 SUM: 5A9FA195
/nissan_pdm/nissancims/owners/asd/og
NOTE:
Each phone has its own separate phonebook. You cannot access Phone A’s phonebook if you are currently connected with
Phone B.
module=COM_BT-GEN3-WOPBAP.TRANSFER
“Transfer Entry” s
Say “Transfer entry.” The system acknowledges
the command and asks you to initiate the transfer
from the phone handset. The new contact phone
number will be transferred from the cellular
phone via the BluetoothT communication link.
itdseq=547
The transfer procedure varies according to each
Use the Transfer Entry command to store a new
name in the system.
When prompted by the system, say the name you
would like to give the new entry.
For example, say: “Mary.”
If the name is too long or too short, the system
tells you, then prompts you for a name again.
When the playback of the list is complete, the
system goes back to the main menu.
You can stop the playback of the list at any time
by pressing the
button on the steering
wheel. The system ends the VR session.
“Phonebook”
(phones with automatic
cellular phone. See the cellular phone Owner’s module=
COM_BT-GEN3-PBOOK-PBAP
itdseq=550
Manual for details. You can also visit
phonebook download function)
www.nissanusa.com/bluetooth for instructions
on transferring phone numbers from NISSAN
NOTE:
recommended cellular phones.
The “Transfer Entry” command is not availThe system repeats the number and prompts you
able when the vehicle is moving.
for the next command. When you have finished
entering numbers or transferring an entry, choose
Main Menu
“Store.”
“Phonebook”
The system confirms the name, location and
Also, if the name sounds too much like a name
Speak a Name
number.
already stored, the system tells you, then prompts
“List Names” s
module=
COM_BT-GEN3-WOPBAP.DELETE
itdseq=548
you for a name again.
“Delete Entry” s
“Record Name” s
The system will ask you to transfer a phone
Use the Delete Entry command to erase one
For phones that support automatic download of
number stored in the cellular phone’s memory.
entry from the phonebook. After the system recthe phonebook (PBAP BluetoothT profile), the
ognizes the command, speak the name to delete
Enter a phone number by voice command:
“Phonebook” command is used to manage enor say “List Names” to choose an entry.
tries in the vehicle phonebook. You can say the
For example, say: “five five five one two one two.” module=COM_BT-GEN3-WOPBAP.LIST.13ALT itdseq=549
“List Names” s
name of an entry at this menu to initiate dialing of
See “How to say numbers” in this section for
that entry.
more information.
Use the List Names command to hear all the
names in the phonebook.
The phonebook stores up to 1000 names for
To transfer a phone number stored in the cellular
each phone connected to the system.
The system recites the phonebook entries but
phone’s memory:
does not include the actual phone numbers.
4-78 Monitor, climate, audio, phone and voice recognition systems
Z REVIEW COPY—2013 Altima Sedan (asd)
Owners Manual (owners)—USA_English (nna)
03/22/12—root X
JOBNAME: No Job Name PAGE: 241 SESS: 5 OUTPUT: Thu Mar 22 15:15:24 2012 SUM: 63D5249C
/nissan_pdm/nissancims/owners/asd/og
When a phone is connected to the system, the
itdseq=557
module=COM_BT-GEN3-PBAP.RECORD
“Record Name” s
itdseq=552
module=COM_BT-GEN3-CONNECT-PH.13ALT-NEW
“Connect Phone”
phonebook is automatically downloaded to the
The system allows you to record custom voice
vehicle. This feature allows you to access your
NOTE:
tags for contact names in the phonebook that the
phonebook from the BluetoothT system and call
vehicle has difficulty recognizing. This feature can
The Add Phone command is not available
contacts by name. You can record a custom
also be used to record voice tags to directly dial
when the vehicle is moving.
voice tag for contact names that the system has
an entry with multiple numbers. Up to 40 voice
difficulty recognizing. For more information see
Main Menu
tags can be recorded to the system.
“Record name” in this section.
module=COM_BT-GEN3-RECENT-CALLS itdseq=553
“Connect Phone”
“Recent Calls”
NOTE:
Each phone has its own separate phonebook. You cannot access Phone A’s phonebook if you are currently connected with
Phone B.
module=COM_BT-GEN3-PBAP-LIST.13ALT
“List Names” s
“Select Phone” s
“Recent Calls”
“Delete Phone” s
“Outgoing” s
itdseq=551
Use the List Names command to hear all the
names and locations in the phone book.
“Add Phone” s
Main Menu
“Replace Phone” s
“Incoming” s
“Bluetooth OFF” s
“Missed” s
“Phonebook Download OFF” s
Use the Recent Calls command to access outgoing, incoming or missed calls.
module=COM_BT-GEN3-RECENT.OUTGOING
“Display Settings” s
itdseq=554
Use the Connect Phone commands to manage
The system recites the phone book entries but
“Outgoing” s
the phones connecting to the vehicle or to enable
does not include the actual phone numbers.
the BluetoothT function on the vehicle.
Use
the
Outgoing
command
to
list
the
outgoing
When the playback of the list is complete, the
module=COM_BT-GEN3-CONNECT.ADD itdseq=558
calls made from the vehicle.
system goes back to the main menu.
“Add Phone” s
module=COM_BT-GEN3-RECENT.INCOMING itdseq=555
“Incoming”
You can stop the playback of the list at any time
Use the Add Phone command to add a phone to
the vehicle. See “Connecting procedure” in this
Use the Incoming command to list the incoming
button on the steering
by pressing the
section for more information.
calls made to the vehicle.
wheel. The system ends the VR session. See the
module=COM_BT-GEN3-CONNECT.SELECT itdseq=559
“Record name” command in this section for infor- module=COMC_BT-GEN3-RECENT.MISSED itdseq=556
“Select Phone” s
“Missed” s
mation about recording custom voice tags for list
Use the Select Phone command to select from a
Use the Missed command to list the calls made to
entries that the system has difficulty pronounclist of phones connected to the vehicle. The systhe vehicle that were not answered.
ing.
Monitor, climate, audio, phone and voice recognition systems 4-79
Z REVIEW COPY—2013 Altima Sedan (asd)
Owners Manual (owners)—USA_English (nna)
03/22/12—root X
JOBNAME: No Job Name PAGE: 242 SESS: 5 OUTPUT: Thu Mar 22 15:15:24 2012 SUM: 5C66D703
/nissan_pdm/nissancims/owners/asd/og
tem will list the names assigned to each phone
and then prompt you for the phone you wish to
select. Only one phone can be active at a time.
module=COM_BT-GEN3-CONNECT.DELETE
“Delete Phone” s
To turn the feature back on, say “Phonebook
Download”. When the command is recognized,
“Sync Contacts ON” will appear on the audio
itdseq=560
display.
Use the Delete Phone command to delete a
phone that is connected to the vehicle. The system will list the names assigned to each phone
and then prompt you for the phone you wish to
delete. Deleting a phone from the vehicle will also
delete that phonebook for that phone.
module=COM_BT-GEN3-CONNECT.REPLACE.13ALT
“Replace Phone” s
Use the Replace Phone command to replace an
existing phone pairing with a new phone. The
system will keep all voice tags assigned to your
phonebook.
module=COM_BT-GEN3-CONNECT.BT-OFF.13ALT
“Bluetooth OFF” s
Use the Bluetooth OFF command to prevent a
wireless connection to your phone.
module=COM_BT-GEN3-CONNECT-DISP.13ALT
“Display Settings” s
2. Sit in the driver’s seat with the engine run-
ning, the parking brake on, and the transmisitdseq=564
Use the Display Settings command to control
where incoming call notifications are displayed in
the vehicle. Say “Driver Only” to have call notifications shown on the vehicle information display
only. Say “Both” to have call notifications shown
itdseq=561
on
both the vehicle information display and the
center audio display.
To turn the feature back on, say “Phonebook
Download”. When the command is recognized,
“Sync Contacts ON” will appear on the audio
display.
itdseq=562
module=COM_BT-GEN3-SPKR-ADAPT itdseq=565
VOICE ADAPTATION (VA) MODE
Voice Adaptation allows up to two out-of-dialect
module=COM_BT-GEN3-CONNECT-PBOOKOFF.13ALTusers
itdseq=563
to train the system to improve recognition
“Phonebook Download OFF” s
1. Position the vehicle in a reasonably quiet
outdoor location.
sion in P (Park).
3. Press and hold the
than 5 seconds.
button for more
4. The system announces: “Press the
) button for the
PHONE/SEND (
hands-free phone system to enter the voice
adaptation mode or press the PHONE/END
) button to select a different lan(
guage.”
5. Press the
button.
For information on selecting a different language, see “Choosing a language” in this
section.
6. Voice memory A or memory B is selected
automatically. If both memory locations are
already in use, the system will prompt you to
overwrite one. Follow the instructions provided by the system.
accuracy. By repeating a number of commands,
the users can create a voice model of their own
Use the Phonebook Download OFF command to
voice that is stored in the system. The system is
turn off the automatic downloading of the handcapable of storing a different voice adaptation
set phonebook to the available (if supported by
7. When preparation is complete and you are
model for each connected phone.
the cellular phone). When the command is recready to begin, press the
button.
module=
COM_BT-GEN3-SA-TRAIN.PROC.13ALT
itdseq=566
ognized, “Sync Contacts OFF” will appear on the
Training procedure
8. The VA mode will be explained. Follow the
audio display.
instructions provided by the system.
The procedure for training a voice is as follows.
4-80 Monitor, climate, audio, phone and voice recognition systems
Z REVIEW COPY—2013 Altima Sedan (asd)
Owners Manual (owners)—USA_English (nna)
03/22/12—root X
JOBNAME: No Job Name PAGE: 243 SESS: 5 OUTPUT: Thu Mar 22 15:15:24 2012 SUM: 32B176DA
/nissan_pdm/nissancims/owners/asd/og
9. When training is finished, the system will tell
you an adequate number of phrases have
been recorded.
10. The system will announce that voice adaptation has been completed and the system is
ready.
The VA mode will stop if:
button is pressed for more than 5
● The
seconds in VA mode.
● The vehicle begins moving during VA mode.
● The ignition switch is placed in the OFF or
LOCK position.
module=COM_BT-GEN3-SA-TRAIN.PHRASE
Training phrases
● delete redial number
● phonebook delete entry
● phonebook list names
● next entry
● call eight oh five four one
● dial star two one seven oh
● correction
● yes
● connect phone
● no
● dial seven four oh one eight
● select
● previous entry
● missed
● delete
● dial eight five six nine two
● dial nine seven two six six
● Bluetooth on
● call seven six three oh one
itdseq=567
During the VA mode, the system instructs the
trainer to say the following phrases. (The system
will prompt you for each phrase.)
● phonebook transfer entry
● dial three oh four two nine
● delete call back number
● incoming
● transfer entry
● eight pause nine three two pause seven
● delete all entries
● call seven two four zero nine
● outgoing
● go back
● call three one nine oh two
● call five six two eight zero
● nine seven pause pause three oh eight
● cancel
● call back number
● call star two zero nine five
● delete phone
● dial eight three zero five one
● record name
● four three pause two nine pause zero
● dial six six four three seven
module=COM_BT-GEN3.MANUAL-CTRL.13ALT
MANUAL CONTROL
itdseq=56
While using the Voice Recognition system, it is
possible to select menu options by using the
steering wheel controls instead of speaking voice
commands. The manual control mode does not
allow dialing a phone number by digits. The user
may select an entry from the Phonebook or Recent Calls lists. To re-activate voice recognition,
exit the manual control mode by pressing and
holding the PHONE/END (
) button. At that
Monitor, climate, audio, phone and voice recognition systems 4-81
Z REVIEW COPY—2013 Altima Sedan (asd)
Owners Manual (owners)—USA_English (nna)
03/22/12—root X
JOBNAME: No Job Name PAGE: 244 SESS: 5 OUTPUT: Thu Mar 22 15:15:24 2012 SUM: 28C5118C
/nissan_pdm/nissancims/owners/asd/og
time, pressing the PHONE/SEND (
) button
will start the Hands Free Phone System.
module=COM_BT-GEN3.MANUAL.TIPS.13ALT
Operating tips
module=COM_BT-GEN3.TROUBLESHOOT
TROUBLESHOOTING GUIDE
itdseq=570
The system should respond correctly to all voice
itdseq=569
● To enter manual control mode, start the
Voice Recognition system and tilt the tuning
) switch up or down. The system will
speak 9Showing Manual Options9 when
manual controls are initially activated.
commands without difficulty. If problems are encountered, try the following solutions.
Where the solutions are listed by number, try
each solution in turn, starting with number 1, until
the problem is resolved.
● To browse the menu options, tilt the tuning
) switch up or down. The system will
always speak the current menu option. Depending on the audio display, it will also
show the current menu option.
● To select the current menu option, press the
PHONE/SEND (
) button.
● To go back to the previous menu, press the
PHONE/END (
) button. If the current
menu is the Main Menu, pressing the
PHONE/END (
) button will exit the
Phone system.
● To exit the manual control mode, press and
) button for 5
hold the PHONE/END (
seconds.
4-82 Monitor, climate, audio, phone and voice recognition systems
Z REVIEW COPY—2013 Altima Sedan (asd)
Owners Manual (owners)—USA_English (nna)
03/22/12—root X
JOBNAME: No Job Name PAGE: 245 SESS: 5 OUTPUT: Thu Mar 22 15:15:24 2012 SUM: 24AAAAE2
/nissan_pdm/nissancims/owners/asd/og
Symptom
System fails to interpret the command correctly.
The system consistently selects the wrong entry from the
phone book.
Solution
1. Ensure that the command is valid. See “List of voice commands” in this section.
2. Ensure that the command is spoken after the tone.
3. Speak clearly without pausing between words and at a level appropriate to the ambient noise level in the vehicle.
4. Ensure that the ambient noise level is not excessive (for example, windows open or defroster on). NOTE: If it is too
noisy to use the phone, it is likely that the voice commands will not be recognized.
5. If more than one command was said at a time, try saying the commands separately.
6. If the system consistently fails to recognize commands, the voice training procedure should be carried out to improve the recognition response for the speaker. See “Voice Adaptation (VA) mode” in this section.
1. Ensure that the phone book entry name requested matches what was originally stored. This can be confirmed by
using the “List Names” command. See “Phonebook” in this section.
2. Replace one of the names being confused with a new name.
Monitor, climate, audio, phone and voice recognition systems 4-83
Z REVIEW COPY—2013 Altima Sedan (asd)
Owners Manual (owners)—USA_English (nna)
03/22/12—root X
JOBNAME: No Job Name PAGE: 246 SESS: 5 OUTPUT: Thu Mar 22 15:15:24 2012 SUM: 3E49BE79
/nissan_pdm/nissancims/owners/asd/og
BLUETOOTHT HANDS-FREE PHONE
SYSTEM WITHOUT NAVIGATION
SYSTEM
(Type B) (if so equipped)
module=
COM_BT-GEN3-10DA-INTRO.13ALT
ENTITY=WU0242
art=lha2290
itdseq=571
TRANSLATE
WARNING
● Use a phone after stopping your vehicle
in a safe location. If you have to use a
phone while driving, exercise extreme
caution at all times so full attention may
be given to vehicle operation.
ENTITY=WI0877
● If you are unable to devote full attention
to vehicle operation while talking on
the phone, pull off the road to a safe
location and stop your vehicle.
CAUTION
To avoid discharging the vehicle battery,
use a phone after starting the engine.
LHA2290
Your NISSAN is equipped with the BluetoothT
Hands-Free Phone System. If you have a compatible BluetoothT enabled cellular phone, you
can set up the wireless connection between your
cellular phone and the in-vehicle phone module.
With BluetoothT wireless technology, you can
make or receive a hands-free telephone call with
your cellular phone in the vehicle.
Once your cellular phone is connected to the
in-vehicle phone module, no other phone connecting procedure is required. Your phone is
automatically connected with the in-vehicle
4-84 Monitor, climate, audio, phone and voice recognition systems
Z REVIEW COPY—2013 Altima Sedan (asd)
Owners Manual (owners)—USA_English (nna)
03/22/12—root X
JOBNAME: No Job Name PAGE: 247 SESS: 5 OUTPUT: Thu Mar 22 15:15:24 2012 SUM: 515306AF
/nissan_pdm/nissancims/owners/asd/og
phone module when the ignition switch is placed
in the ON position with the previously connected
cellular phone turned on and carried in the vehicle.
NOTE:
Some devices require the user to accept
connections to other BluetoothT devices. If
your phone does not connect automatically
to the system, consult the phone’s Owner’s
Manual for details on device operation.
You can connect up to 5 different BluetoothT
cellular phones to the in-vehicle phone module.
However, you can talk on only one cellular phone
itdseq=572
at a time.
Before using the BluetoothT Hands-Free Phone
System, refer to the following notes.
● Set up the wireless connection between a
compatible cellular phone and the in-vehicle
phone module before using the hands-free
phone system.
● Some BluetoothT enabled cellular phones
may not be recognized or work properly.
Please visit www.nissanusa.com/bluetooth
for a recommended phone list and connecting instructions.
● You will not be able to use a hands-free
phone under the following conditions:
– Your vehicle is outside of the cellular service area.
– Your vehicle is in an area where it is
difficult to receive a cellular signal; such
as in a tunnel, in an underground parking
garage, near a tall building or in a mountainous area.
– Your cellular phone is locked to prevent it
from being dialed.
● If the hands-free phone system seems to be
malfunctioning, see “Troubleshooting guide”
in this section. You can also visit
www.nissanusa.com/bluetooth for troubleshooting help.
● Some cellular phones or other devices may
cause interference or a buzzing noise to
come from the audio system speakers. Storing the device in a different location may
reduce or eliminate the noise.
● Refer to the cellular phone Owner’s Manual
● When the radio wave condition is not ideal
regarding the telephone charges, cellular
or ambient sound is too loud, it may be
phone antenna and body, etc.
difficult to hear the other person’s voice durmodule=COM_BT-GEN3-10DA-REGULATORY-INFO.13ALT
ing a call.
REGULATORY INFORMATION
● Do not place the cellular phone in an area
surrounded by metal or far away from the
in-vehicle phone module to prevent tone
quality degradation and wireless connection
disruption.
● While a cellular phone is connected through
the BluetoothT wireless connection, the battery power of the cellular phone may discharge quicker than usual. The BluetoothT
Hands-Free Phone System cannot charge
cellular phones.
FCC Regulatory information
– CAUTION: To maintain compliance with
FCC’s RF exposure guidelines, use only the
supplied antenna. Unauthorized antenna,
modification, or attachments could damage
the transmitter and may violate FCC regulations.
– Operation is subject to the following two conditions:
1. This device may not cause interference and
2. this device must accept any interference,
including interference that may cause undesired operation of the device.
Monitor, climate, audio, phone and voice recognition systems 4-85
Z REVIEW COPY—2013 Altima Sedan (asd)
Owners Manual (owners)—USA_English (nna)
03/22/12—root X
JOBNAME: No Job Name PAGE: 248 SESS: 5 OUTPUT: Thu Mar 22 15:15:24 2012 SUM: 55A3127A
/nissan_pdm/nissancims/owners/asd/og
IC Regulatory information
button is
which takes a few seconds. If the
pressed before the initialization completes, the
system will announce “Hands-free phone system
not ready” and will not react to voice commands.
The command given is picked up by the microphone, and voice feedback is given when the
command is accepted.
– Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
● If you need to hear the available commands
module=COM_BT-GEN3-10DA-OPTIPS.13ALT itdseq=575
interference, including interference that may
for the current menu again, say “Help” and
Operating tips
cause undesired operation of the device.
the system will repeat them.
To get the best performance out of the NISSAN
– This Class B digital apparatus meets all re● If a command is not recognized, the system
Voice Recognition system, observe the following:
quirements of the Canadian Interferenceannounces, “Command not recognized.
● Keep the interior of the vehicle as quiet as
Causing Equipment Regulations.
Please try again.” Make sure the command is
possible. Close the windows to eliminate
said exactly as prompted by the system and
surrounding noises (traffic noises, vibration
BLUETOOTHt is a
repeat the command in a clear voice.
sounds, etc.), which may prevent the system
trademark owned by
● If you want to go back to the previous comfrom recognizing voice commands correctly.
Bluetooth SIG, Inc.
mand, you can say “Go back” or “Correc● Wait until the tone sounds before speaking a
tion” any time the system is waiting for a
and licensed to Viscommand. Otherwise, the command will not
response.
teon.
module=COM_BT-GEN3-10DA-USING.13ALT itdseq=573be received properly.
● You can cancel a command when the sysUSING THE SYSTEM
● Start speaking a command within 5 seconds
tem is waiting for a response by saying,
after the tone sounds.
“Cancel” or “Quit.” The system announces
The NISSAN Voice Recognition system allows
“Cancel” and ends the VR session. You can
hands-free operation of the BluetoothT Phone
● Speak in a natural voice without pausing
button on the
also press and hold the
System.
between words.
steering wheel for 5 seconds at any time to
module=COM_BT-GEN3-10DA-GIVE-VC.13ALT itdseq=576
If the vehicle is in motion, some commands may
Giving voice commands
end the VR session. Whenever the VR sesnot be available so full attention may be given to
sion is cancelled, a double beep is played to
To operate NISSAN Voice Recognition, press
vehicle operation.
indicate you have exited the system.
module=COM_BT-GEN3-10DA-INITIALIZATION.13ALTand itdseq=574
release the
button located on the
Initialization
steering wheel. After the tone sounds, speak a
command.
When the ignition switch is placed in the ON
position, NISSAN Voice Recognition is initialized,
4-86 Monitor, climate, audio, phone and voice recognition systems
Z REVIEW COPY—2013 Altima Sedan (asd)
Owners Manual (owners)—USA_English (nna)
03/22/12—root X
JOBNAME: No Job Name PAGE: 249 SESS: 5 OUTPUT: Thu Mar 22 15:15:24 2012 SUM: 368A608B
/nissan_pdm/nissancims/owners/asd/og
● If you want to adjust the volume of the voice
feedback, press the volume control switches
(+ or -) on the steering wheel while being
provided with feedback. You can also use
the radio volume control knob.
art=lha2273
NO TRANS
You can also use the
button
to interrupt the system feedback
and give a command at once. See
“List of voice commands” and
“During a call” in this section for
more information.
● In most cases you can interrupt the voice
feedback to speak the next command by
pressing the
button on the steering
wheel.
● To use the system faster, you may speak the
second level commands with the main menu
command on the main menu. For example,
press the
button and after the tone
say, “Call Redial.”
LHA2273
module=COM_BT-GEN3-10DA-CTRL-BTNS.13ALT
CONTROL BUTTONS
The control buttons for the BluetoothT HandsFree Phone System are located on the steering
wheel.
PHONE/SEND
itdseq=578
itdseq=577
PHONE/END
While the voice recognition system is active, press and hold
button for 5 seconds to
the
quit the voice recognition system
at any time.
Tuning switch
While using the voice recognition
system, tilt the tuning switch up or
down to manually control the
phone system.
button to initiate module=COM_BT-GEN3-10DA-CONNECT.13ALT
Press the
CONNECTING PROCEDURE
a VR session or answer an incomTo connect a phone to the BluetoothT Handsing call.
Free Phone System:
1. Press the SETTING button.
Monitor, climate, audio, phone and voice recognition systems 4-87
Z REVIEW COPY—2013 Altima Sedan (asd)
Owners Manual (owners)—USA_English (nna)
03/22/12—root X
JOBNAME: No Job Name PAGE: 250 SESS: 5 OUTPUT: Thu Mar 22 15:15:24 2012 SUM: 2CAFD877
/nissan_pdm/nissancims/owners/asd/og
art=lha2257
art=lha2274
NO TRANS
NO TRANS
module=COM_BT-GEN3-10DA-VC.13ALT
VOICE COMMANDS
itdseq=579
Voice commands can be used to operate the
BluetoothT Hands-Free Phone System. Press
the
button and say “Phone” to bring up the
phone command menu. The available options
are:
● Call
● Phonebook
● Recent Calls
● Send Text
LHA2257
2. Use the TUNE/SCROLL knob to select
“Bluetooth” and then press the ENTER button.
LHA2274
● Read Text
3. Use the TUNE/SCROLL knob to select
● Select Phone
“Add Phone or Device” and then press the module=COM_BT-GEN3-10DA-CALL.13ALT
“Call”
ENTER button.
itdseq=580
For more information on the “Call” command, see
4. When a message with a PIN appears on the
screen, operate the BluetoothT phone to
“Making a call” in this section.
module=COM_BT-GEN3-10DA-PBOOK.13ALT itdseq=58
enter the PIN.
The connecting procedure varies according to
each phone. See the phone’s Owner’s Manual
for
details.
You
can
also
visit
www.nissanusa.com/bluetooth or call the
NISSAN Consumer Affairs Department for instructions on connecting recommended cellular
phones.
“Phonebook”
The following commands are available under
“Phonebook”:
4-88 Monitor, climate, audio, phone and voice recognition systems
Z REVIEW COPY—2013 Altima Sedan (asd)
Owners Manual (owners)—USA_English (nna)
03/22/12—root X
JOBNAME: No Job Name PAGE: 251 SESS: 5 OUTPUT: Thu Mar 22 15:15:24 2012 SUM: 46F8E9F7
/nissan_pdm/nissancims/owners/asd/og
● (a name)
Say a name in the phonebook to bring up a
list of options for that phonebook entry. The
system will say the name it interpreted based
on the voice command provided. If the name
is incorrect, say “Correction” to hear another
name.
Once the correct phonebook entry is identified, say “Dial” to dial the number or “Send
Text” to send a text message to that number.
Say “Record Name” to record a name for the
phonebook entry. Say “Delete Recording” to
delete a recorded name for the phonebook
entry.
● List Names
Speak this command to have the system list
the names in the phonebook one by one
alphabetically. Say “Dial” to dial the number
of the current name or “Send Text” to send a
text message to that number. Say “Next Entry” or “Previous Entry” to move through the
list alphabetically. Say “Record Name” to
record a name for the current phonebook
entry. Say “Delete Recording” to delete a
recorded name for the current phonebook
entry.
● Transfer Entry
This command can be used to transfer multiple contacts at a time. To enable manual
contact transfer capability, set “Phonebook
Download” to “Off” in the Setting menu. The
ability to transfer contacts via the OPP
Bluetooth profile depends on your mobile
phone. See your phone’s Owner’s Manual
for details and instructions.
● Delete Entry
Speak this command to delete an entry in
the phonebook. Choose an entry to delete
by speaking the desired name or say “List
Names”.
● Missed Calls
Speak this command to list the last five
missed calls to the vehicle. If the call is from
an entry in the phonebook, the name will be
displayed. Otherwise, the phone number of
the missed call will be displayed.
Say “Dial” to call the number or “Send Text”
to send a text message to that number. Say
“Next Entry” or “Previous Entry” to move
through the list of missed calls.
● Outgoing Calls
Speak this command to list the last five
outgoing calls from the vehicle. If the call
was to an entry in the phonebook, the name
module=COM_BT-GEN3-10DA-RECENT.13ALT itdseq=582
will be displayed. Otherwise, the phone
“Recent Calls”
number of the outgoing call will be displayed.
The following commands are available under
Say “Dial” to call the number or “Send Text”
“Recent Calls”:
to send a text message to that number. Say
● Incoming Calls
“Next Entry” or “Previous Entry” to move
Speak this command to list the last five
through the list of outgoing calls.
incoming calls to the vehicle. If the call is
●
Redial
from an entry in the phonebook, the name
Speak this command to call the last number
will be displayed. Otherwise, the phone
dialed.
number of the incoming call will be displayed.
Say “Dial” to call the number or “Send Text”
to send a text message to that number. Say
“Next Entry” or “Previous Entry” to move
through the list of incoming calls.
Monitor, climate, audio, phone and voice recognition systems 4-89
Z REVIEW COPY—2013 Altima Sedan (asd)
Owners Manual (owners)—USA_English (nna)
03/22/12—root X
JOBNAME: No Job Name PAGE: 252 SESS: 5 OUTPUT: Thu Mar 22 15:15:24 2012 SUM: 4E277CA6
/nissan_pdm/nissancims/owners/asd/og
art=lha2293
NO TRANS
● “Number” – Speak this command to place a
call by inputting numbers.
For 7- and 10-digit phone numbers, speak
module=COM_BT-GEN3-10DA-SEND-READ.13ALT itdseq=583
the numbers. When finished, say “Dial” to
“Send Text / Read Text”
initiate the call. Say “Correction” at any time
in the process to correct a misspoken or
For more information on these commands, see
misinterpreted number.
“Text messaging” in this section.
For phone numbers with more digits or spemodule=COM_BT-GEN3-10DA-SELECT.13ALT itdseq=584
cial characters, say “Special Number”, then
“Select Phone”
speak the digits. Up to 24 digits can be
Speak this command to select a phone to use
entered. Available special characters are
from a list of those phones connected to the
“star”, “pound”, “plus” and “pause”. When
finished, say “Dial” to initiate the call. Say
vehicle.
module=COM_BT-GEN3-10DA-MAKE-CALL.13ALT itdseq=585
“Correction” at any time in the process to
MAKING A CALL
correct a misspoken or misinterpreted numLHA2293
module=COM_BT-GEN3-10DA-REC-CALL.13ALT
ber or character.
To make a call from a phone connected to the
● Call Back
Speak this command to call the number of
the last incoming call to the vehicle.
itdseq=586
vehicle’s BluetoothT Hands-Free Phone System:
● Press the
button.
● The system will prompt you for a command.
● Select one of the available voice commands
to continue:
● “(a name)” – Speak the name of a phonebook entry to place a call to that entry. The
system will respond with the name it interpreted from your command and will prompt
you to confirm that the name is correct. Say
“Yes” to initiate the call or “No” to hear another name from the phonebook.
● “Redial” – Speak this command to dial the
number of the last outgoing call. The system
will display “Redialing ”.
The name of the phonebook entry will be
displayed if it available, otherwise the number being redialed will be displayed.
● “Call Back” –Speak this command to dial the
number of the last incoming call. The system
will display “Calling back
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.6
Linearized : Yes
XMP Toolkit : 3.1-702
About : 0ea00115-ac70-11ec-0000-5f51d97b6f4b
Producer : GPL Ghostscript 8.63
Modify Date : 2012:03:27 11:11:23-04:00
Create Date : 2012:03:22 15:16:21-04:00
Creator Tool : XyEnterprise XPP 8.3C.1 SP #2
Metadata Date : 2012:03:27 11:11:23-04:00
Document ID : 0ea00115-ac70-11ec-0000-5f51d97b6f4b
Instance ID : uuid:3cda59d6-9deb-41b3-9b53-ecc88030c0f2
Format : application/pdf
Title : No Job Name
Has XFA : No
Page Count : 37
Creator : XyEnterprise XPP 8.3C.1 SP #2
EXIF Metadata provided by EXIF.tools