Robert Bosch Car Multimedia PSARCCA100 Multimedia System with Bluetooth for PSA vehicles User Manual iPerf and RTA tests

Download:
Mirror Download [FCC.gov]
Document ID	3119672
Application ID	SbAbm/CwS7VOcAt1C8dhCg==
Document Description	Users Manual__iPerf_and_RTA_tests
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	117.52kB (1468984 bits)
Date Submitted	2016-09-01 00:00:00
Date Available	2016-09-02 00:00:00
Creation Date	2016-03-15 15:02:59
Producing Software	Microsoft® Word 2013
Document Lastmod	2016-03-15 15:02:59
Document Title	Users Manual__iPerf_and_RTA_tests
Document Creator	Microsoft® Word 2013
Document Author:	Messplatz CM/QMM2

PSA RCC manual for radio type approval tests
and iPerf
Car Multimedia
EMC-Centre
BT-Wifi Test Test Description
internal: Manual_iPerf_and_RTA_tests_PSA_V2.docx
2016-03-15
1 / 15
PSA RCC manual for radio type approval tests
and iPerf
Car Multimedia
EMC-Centre
1 Content
PSA RCC Device ................................................................................................................................ 3
2.1
Front side ................................................................................................................................. 3
2.2
Back Side from A1 non DAB Variant ........................................................................................ 3
2.3
Back Side from A1 DAB Variant ............................................................................................... 3
2.4
Back Side from A2 DAB-Variant ............................................................................................... 4
2.5
Back Side from A2 nonDAB-Variant ........................................................................................ 4
Test Setup ........................................................................................................................................ 5
Network configuration .................................................................................................................... 6
Putty Configuration and Use ........................................................................................................... 7
Bluetooth Tests................................................................................................................................ 9
6.1
Bluetooth tests with Bluetooth tester................................................................................... 10
WLAN ............................................................................................................................................. 11
7.1
Connect to WLAN-Access Point and do iPerf ................................................................ 13
internal: Manual_iPerf_and_RTA_tests_PSA_V2.docx
2016-03-15
2 / 15
PSA RCC manual for radio type approval tests
and iPerf
Car Multimedia
EMC-Centre
2 PSA RCC Device
2.1 Front side
Bluetooth
Antenna
Wifi
Antenna
2.2 Back Side from A1 non DAB Variant
LVDS USB2
USB1 USB3 LVDS
FM2 AM/FM1
Main Connector
2.3 Back Side from A1 DAB Variant
LVDS USB2
USB1 USB3 LVDS
DAB FM2 AM/FM1
Main Connector
internal: Manual_iPerf_and_RTA_tests_PSA_V2.docx
2016-03-15
3 / 15
PSA RCC manual for radio type approval tests
and iPerf
Car Multimedia
EMC-Centre
2.4 Back Side from A2 DAB-Variant
GNSS AM/FM1 FM2
USB3
DAB
USB1 USB2 LVDS
Main Connector
2.5 Back Side from A2 nonDAB-Variant
internal: Manual_iPerf_and_RTA_tests_PSA_V2.docx
2016-03-15
4 / 15
PSA RCC manual for radio type approval tests
and iPerf
Car Multimedia
EMC-Centre
3 Test Setup
PC/Laptop
PSA RCC DUT
HSD USB cable
Ethernet cable
USBEthernet Adapter
internal: Manual_iPerf_and_RTA_tests_PSA_V2.docx
2016-03-15
5 / 15
PSA RCC manual for radio type approval tests
and iPerf
Car Multimedia
EMC-Centre
4 Network configuration
Add the IP-Adress for 172.17.0.5 for the D-Link adapter at the Microsoft network controls as shown in
the next pictures.
Network connection:
With a double click on the LAN-connection with the D-Link DUB-E100 USB 2.0 Fast Ethernet Adapter
you should be able to make the following setting under properties:
In case of problems it might be necessary to restart the computer and check all items again.
Be also aware that your computer is capable multi network connections. This is often related to your
PC administration policies.
IP address “172.17.0.1” is the DUT
internal: Manual_iPerf_and_RTA_tests_PSA_V2.docx
2016-03-15
6 / 15
PSA RCC manual for radio type approval tests
and iPerf
Car Multimedia
EMC-Centre
5 Putty Configuration and Use
Start Putty: (Simply run Putty.EXE no installation is required.)
If not configured up to now configure Putty as shown in the next 3 pictures:
You can use your personal window settings under “Window”.
internal: Manual_iPerf_and_RTA_tests_PSA_V2.docx
2016-03-15
7 / 15
PSA RCC manual for radio type approval tests
and iPerf
Car Multimedia
EMC-Centre
Use “root” as username for Auto-login
Afterwards use “Save-Button” in “Session”-screen.
From now on the session can be started by double-clicking the entry “G3G”.
At the first time of starting Putty a message is displayed. The text asks if you trust the connection.
Click “yes” button.
After some seconds “root@mx6q:~#“ is shown
Then type in “cd /rta” to enter the required directory
Now iPerf, Bluetooth or WLAN tests can be started as described in the following chapters.
internal: Manual_iPerf_and_RTA_tests_PSA_V2.docx
2016-03-15
8 / 15
PSA RCC manual for radio type approval tests
and iPerf
Car Multimedia
EMC-Centre
6 Bluetooth Tests
Note that the RF Power on all tests are fixed settings inside module.
They cannot be changed.
To start any test it is necessary to type in “./bt_rf_certification_tests.sh” added with the needed
parameters which a described in the following picture:
For example:
Continuous Transmission at 2402MHz with DH5-Packets:
./bt_rf_certification_tests.sh 1 2402 _DH5
Continuous Hopping on all channels with 3-DH5-Packets:
./bt_rf_certification_tests.sh 3 _3DH5 all
internal: Manual_iPerf_and_RTA_tests_PSA_V2.docx
2016-03-15
9 / 15
PSA RCC manual for radio type approval tests
and iPerf
Car Multimedia
EMC-Centre
6.1 Bluetooth tests with Bluetooth tester
Activate Bluetooth test mode to test with a Bluetooth tester like Rohde & Schwarz CBT
In order to leave this mode, the DUT has to be rebooted with the command reboot:
Alternative the device can be disconnected from the power supply. Connect it some seconds later and
start the device again.
internal: Manual_iPerf_and_RTA_tests_PSA_V2.docx
2016-03-15
10 / 15
PSA RCC manual for radio type approval tests
and iPerf
Car Multimedia
EMC-Centre
7 WLAN
Note that the RF Power on all tests are fixed settings inside module.
They can not be changed. You will get a failure from Punitest if you try to change the power value.
Start Punitest
internal: Manual_iPerf_and_RTA_tests_PSA_V2.docx
2016-03-15
11 / 15
PSA RCC manual for radio type approval tests
and iPerf
Car Multimedia
EMC-Centre
The Punitest menue is shown:
Then key in:
3 1  (CH1)
5 1  (1Mbit)
7 1  (Tx Start)
A feedback is always given on the screen.
The Punitest menu is shown again.
internal: Manual_iPerf_and_RTA_tests_PSA_V2.docx
2016-03-15
12 / 15
PSA RCC manual for radio type approval tests
and iPerf
Car Multimedia
EMC-Centre
7.1 Connect to WLAN-Access Point and do iPerf
In order to connect to a WLAN Access Point an unsecured WLAN network with the SSID “PSA-WLAN”
is necessary. If punitest was used directly before the device must be restarted before normal WLAN
operation is possible.
If not already done change directory with “cd /rta”. Afterwards type “./init_wifi.sh” to connect to the
WLAN network.
Now configure the IP of the DUT according the network settings of your Access Point with
“ifconfig wlan0 suitable IP”
Start “jPerf” on the PC which is connected to the Access Point.
internal: Manual_iPerf_and_RTA_tests_PSA_V2.docx
2016-03-15
13 / 15
PSA RCC manual for radio type approval tests
and iPerf
Car Multimedia
EMC-Centre
Do the following settings and start the test
internal: Manual_iPerf_and_RTA_tests_PSA_V2.docx
2016-03-15
14 / 15
PSA RCC manual for radio type approval tests
and iPerf
Car Multimedia
EMC-Centre
Now start iperf on the DUT. The script will ask for the IP of the iPerf-Server. Type in the IP of the PC
where you started “jPerf”
To stop the script use twice the key combination “STRG” + C or “CTRL” + C
If a failure appears or jPerf stops working activate in addition the Compatibility Mode and repeat the
steps to start the test.
internal: Manual_iPerf_and_RTA_tests_PSA_V2.docx
2016-03-15
15 / 15

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 15
Language                        : de-DE
Tagged PDF                      : Yes
Author                          : Messplatz CM/QMM2
Creator                         : Microsoft® Word 2013
Create Date                     : 2016:03:15 15:02:59+01:00
Modify Date                     : 2016:03:15 15:02:59+01:00
Producer                        : Microsoft® Word 2013

EXIF Metadata provided by EXIF.tools