Rollease Acmeda MT0201012 Remote Control User Manual 2

Rollease Acmeda Inc Remote Control 2

Contents

User manual-2

AUTOMATE™ ARC 15 Channel RemoteFEATURES:• Multi channel selectable• Group Control• Leveling control• LCD Display• Slim magnetic wall mount• Hide unused channel functionAUTOMATE™ | ARC 15 Channel Remotes feature a contemporary design and are compatible with all ARC™ motors. This remote is perfect for individual shade, room and whole home control.MT02-0101-072003_PRGM_GL_v1.0 JUNE 2018433 MHzLEVEL CONTROL
2 | Automate™ Programming Instructions | 15 Channel Remote 1 TECHNICAL DATA / PACK CONTENTS 32 SAFETY 43 INSTALLATION 53.1 Remote battery 53.2 Wall mount holder 54 FUNCTIONAL OVERVIEW 64.1 Buttons 64.2 Leveling control 64.3 Selecting a channel 74.4 Group control using channel "0" 75 PROGRAMMING 85.1 Protocol selection 85.2 Using motor P1 button 85.3 Using pre-existing controller 95.4 Hide unused channels 96 INITIAL SET UP 106.1 Check motor direction 106.2 Set Limits 106.3 Locking the Limit setting function 117 ADJUSTING LIMITS 127.1 Adjust upper Limit 127.2 Adjust lower Limit 128 FAVORITE POSITIONING 138.1 Set a favorite position 138.2 Send shade to favorite position 138.3 Delete favorite position 139 TROUBLE SHOOTING 1410 NOTES 15CONTENTS
Automate™ Programming Instructions | 15 Channel Remote | 31 TECHNICAL DATA / PACK CONTENTSTECHNICAL SPECIFICATIONSVoltage: 3V (CR2450)Frequency: 433.92 MHzTransmitting Power: 10 milliwattAmbient Operating Temperature: -10°C - 50°C [14°F - 122°F]Transmission Distance: up to 200m [656'] (open space)1. 1 x Remote 2. 1 x Wall Mounting Clip Cover3. 1 x Wall Mounting Clip Case4. 2 x Phillips Head Screw5. 2 x Wall Plug6. 3V - CR2450 Battery7. Programming ManualKit Components1.1PROGRAMMING MANUAL(Not to scale)1. 5.2.6.7. 3.4.
4 | Automate™ Programming Instructions | 15 Channel Remote 2 SAFETYWARNING: Important safety instructions to be read before installation and use. Incorrect installation or use can lead to serious injury and will void manufacturer’s liability and warranty. It is important for the safety of persons to follow the enclosed instructions. Save these instructions for future reference.• Do not expose to water, moisture, humid and damp environments or extreme temperatures.• Persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge should not be allowed to use this product.• Use or modification outside the scope of this instruction manual will void warranty.• Installation and programming to be performed by a suitably qualified installer.• Follow installation instructions.• For use with motorized shading devices.• Keep away from children.• Frequently inspect for improper operation. Do not use if repair or adjustment is necessary.• Keep clear when in operation.• Replace battery with correctly specified type.Rollease Acmeda declares this equipment is in compliance with the essential requirements and other relevant provisions of R&TT EC Directive 1999/5/ECStatement Regarding FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation.Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Do not dispose of in general waste. Please recycle batteries and damaged electrical products appropriately.5005833
Automate™ Programming Instructions | 15 Channel Remote | 5Remove cover from remote press gently in and down to disengage cover.Install battery with positive (+) side facing up.Slide to remove Snap covers back together.Remote battery3.13 INSTALLATIONWall mount holder3.2Use supplied fasteners and anchors as needed to attach the base and cover.Switch is held in position magnetically and can be removed as desired.Safely dispose of any unused plugs.Remove cover from base by prying with flat head screwdriver.Use supplied fasteners and anchors to attach the base to the wall.
6 | Automate™ Programming Instructions | 15 Channel Remote Press LEVELING DOWN to step via incrementsHold LEVELING DOWN to scroll continuouslyPress LEVELING UP to step via incrementsHold LEVELING UP to scroll continuouslyButtonsLeveling Control4.14.24 FUNCTIONAL OVERVIEWLEVELING UPUPCHANNEL UPLEVELING DOWNDOWNSTOPLOCKCHANNEL DOWNSETTING (P2)The leveling control buttons and LCD display can be used to visualize and accurately set your preferred shade position. When used to control a group of shades, they will all perfectly align to the same position.
Automate™ Programming Instructions | 15 Channel Remote | 7 Press CHANNEL UP to step via increments through the channels 1 - 15Hold CHANNEL UP to scroll continuously through the channels 1 - 15Press CHANNEL DOWN to step via increments through the channels 15 - 1Hold CHANNEL DOWN to scroll continuously through the channels 15 - 1Selecting a channelGroup control using channel "0"4.34.4 One channel must be selected at all times.You can cycle through 1-15 by pressing only CHANNEL UP or you use the CHANNEL DOWN button to cycle in reverse or a combination of both.IMPORTANTChannel "0" is pre-set to control ALL shades paired within your multi-channel remote. To create customized group channels, refer to section 6.
8 | Automate™ Programming Instructions | 15 Channel Remote Approx.Approx.Using motor P1 buttonProtocol selection5.25.15 PROGRAMMINGMultiple motors can be grouped onto shared channels for co-ordinated control. Limit settings and favorite positions cannot be adjusted when motors are grouped together.• Confirm that motor limits and favorite position are already set for each individual motor.• Ensure that each motor you want to group is also assigned to another channel by itselfScreen Flashes "1" = ARC MODEScreen Flashes "2" = EL MODEHold P2 whilst inserting the battery Screen flashes x 5IMPORTANTSelect a channel on switch using the CHANNEL UP or CHANNEL DOWN button(s).ORHold P1 button on motor head.Hold STOP on switch.Motor ResponseMotor ResponseDisplay ResponseRELEASE P1This device can be configured to operate Rollease Acmeda line "EL" motors. (The default mode is ARC protocol.)To toggle between ARC & EL modes, follow the following steps.+
Automate™ Programming Instructions | 15 Channel Remote | 9Hide Unused ChannelsUsing pre-existing controller5.45.3Repeat steps and select 15 as desired number of channels to access all channels.A = Existing controller or channel (to keep)B = Controller or channel to add or removeSelect channel that operates motor on existing remote.Press P2Hold CHANNEL UP and CHANNEL DOWN for 5 secondsPress P2 a second time on existing remote.Press CHANNEL UP or CHANNEL DOWN to select number of channelsSelect desired channel on new remote. Press P2 on new remote.Press STOP for 2 secondsIMPORTANTOR+Motor ResponseDisplay ResponseMotor Response Motor ResponseDisplay ResponseYour multi channel remote can be configured to have anywhere between 1 to 15 visible channels.Inactive channels will not be visible when scrolling through the channel selection.Co
10 | Automate™ Programming Instructions | 15 Channel Remote OROR Check motor direction6.1Damage to shade may occur when operating motor prior to setting limits. Attention should be given.Reversing motor direction using this method is only possible during initial set-upDirection change will not occur if switch is locked. See Section 6.3.To check travel direction of shade, press UP or DOWN on controller.Quick Press = StepLong Press = Continuous TravelTo reverse shade direction, hold both UP AND DOWN until the motor responds.Approx.Motor ResponseIMPORTANT IMPORTANT6 INITIAL SET UP SECS5Set Limits6.2Cycle shade up and down prior to setting limits to settle fabricFor systems using FT Motors & the Ultra Lock, the bottom limit should be set ~ 1.38 in. (35mm) below the Ultra-Lock to disengage the auto lock mechanism when the shade is raised.After setting limits, motor will automatically exit from initial set-up mode.Move shade to the desired highest or lowest position by pressing the UP or DOWN buttons on controller.To save upper limit, hold UP AND STOP.To save lower limit, hold DOWN AND STOP.Motor ResponseIMPORTANTIMPORTANTInitial set-up is not completeIMPORTANTApprox.+++
Automate™ Programming Instructions | 15 Channel Remote | 11Locking the Limit Setting Function6.3Press LOCK and hold for 5 secondsPress LOCK and hold for 5 secondsRelease LOCK button.Locked limit settingsRelease LOCK button.Unlocked limit settingsStops unwanted changes to limit settingsApprox. Approx.Remote Response Remote Display Remote DisplayRemote Response5 5The locked setting will prevent any multi-button functions. These include reversing direction before setting limits, limit setting and toggling between tilt and roller modes.IMPORTANT
12 | Automate™ Programming Instructions | 15 Channel Remote SECSECSS55Adjust Upper LimitAdjust Lower Limit7.17.2Hold UP AND STOP on controller.Hold DOWN and STOP on controller.Move shade to the desired lowest position by pressing the DOWN button.Move shade to the desired highest position by pressing the UP button.To save upper limit, hold UP AND STOP.To save lower limit, hold DOWN and STOP.Approx.Approx.Motor ResponseMotor Response Motor ResponseMotor Response7 ADJUSTING LIMITSSEC SECS S5 5Approx. Approx.For systems using FT Motors & the Ultra Lock, the bottom limit should be set ~ 1.38 in. (35mm) below the Ultra-Lock to disengage the auto lock mechanism when the shade is raised.IMPORTANT++++
Automate™ Programming Instructions | 15 Channel Remote | 13Set a Favorite PositionSend Shade to Favorite PositionDelete Favorite Position8.18.28.3Press P2 on controller. Press STOP on controller. Press STOP on controller.Move shade to the desired position by pressing the UP or DOWN button on the controller.Press P2 on controller. Press STOP on controller. Press STOP on controller.Approx.Motor ResponseMotor ResponseMotor ResponseMotor ResponseMotor ResponseMotor Response8 FAVORITE POSITIONINGOR
14 | Automate™ Programming Instructions | 15 Channel Remote 9 TROUBLE SHOOTINGProblem Cause RemedyMotor is not respondingRemote battery is discharged Replace batteryBattery is inserted incorrectly Check battery polarityRadio interference / ShieldingEnsure remote is positioned away from metal objects and that aerial on motor or receiver is kept straight and away from metal.Receiver distance is too far from remoteMove remote to a closer position or consider a repeater for improved performance.Power failure Check power supply to motor is connected and active.Incorrect motor wiringCheck wiring is connected correctly (refer to motor installation instructions).Cannot set limits on a single motor (multiple motors respond)Using channel 0 to adjust motor limits Always reserve an individual channel for programming functions.Motor will not go down after setting the top limit.Top limit was set using the DOWN and STOP buttons.Reset the motor and begin programming sequence again.Remember that upper limit is to be set using the UP and STOP buttons, and the down limit is set using the DOWN and STOP buttons.Motor will pair, but can not set limits.Switch is in a locked state. Control must be unlocked to set limits or perform any multi-button functions.Press and hold LOCK button for 5 seconds, until locked state changes.
Automate™ Programming Instructions | 15 Channel Remote | 1510 NOTES
16 | Automate™ Programming Instructions | 15 Channel Remote

Navigation menu