Rollease Acmeda MT0201012 Remote Control User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	3902496
Application ID	ZTF7Q3mh7TZrkUp/fyR7HQ==
Document Description	User manual-2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	79.17kB (989632 bits)
Date Submitted	2018-06-27 00:00:00
Date Available	2018-06-28 00:00:00
Creation Date	2018-06-25 10:23:00
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-06-25 10:23:05
Document Title	User manual-2
Document Creator	Adobe InDesign CC 13.1 (Windows)

AUTOMATE ™
ARC 15 Channel Remote
LEVEL CONTROL
433 MHz
AUTOMATE™ | ARC 15 Channel Remotes feature a contemporary design and are
compatible with all ARC™ motors. This remote is perfect for individual shade, room and
whole home control.
MT02-0101-072003_PRGM_GL_v1.0 JUNE 2018
FEATURES:
•
Multi channel selectable
•
Group Control
•
Leveling control
•
LCD Display
•
Slim magnetic wall mount
•
Hide unused channel function
CONTENTS
TECHNICAL DATA / PACK CONTENTS
SAFETY
INSTALLATION
3.1 Remote battery
3.2 Wall mount holder
FUNCTIONAL OVERVIEW
4.1 Buttons
4.2 Leveling control
4.3 Selecting a channel
4.4 Group control using channel "0"
PROGRAMMING
5.1 Protocol selection
5.2 Using motor P1 button
5.3 Using pre-existing controller
5.4 Hide unused channels
INITIAL SET UP
10
6.1 Check motor direction
10
6.2 Set Limits
10
6.3 Locking the Limit setting function
11
12
ADJUSTING LIMITS
7.1 Adjust upper Limit
12
7.2 Adjust lower Limit
12
13
FAVORITE POSITIONING
8.1 Set a favorite position
13
8.2 Send shade to favorite position
13
8.3 Delete favorite position
13
TROUBLE SHOOTING
14
10
NOTES
15
2 | Automate™ Programming Instructions | 15 Channel Remote
1
TECHNICAL DATA / PACK CONTENTS
TECHNICAL SPECIFICATIONS
Voltage:
3V (CR2450)
Frequency:
433.92 MHz
Transmitting Power:
10 milliwatt
Ambient Operating Temperature:
-10°C - 50°C [14°F - 122°F]
Transmission Distance:
1.1
up to 200m [656'] (open space)
Kit Components
1.
1 x Remote
2.
1 x Wall Mounting Clip Cover
3.
1 x Wall Mounting Clip Case
4.
2 x Phillips Head Screw
5.
2 x Wall Plug
6.
3V - CR2450 Battery
7.
Programming Manual
PROGRAMMING
MANUAL
(Not to scale)
7.
1.
6.
2.
4.
3.
5.
Automate™ Programming Instructions | 15 Channel Remote | 3
2
SAFETY
WARNING: Important safety instructions to be read before installation and use.
Incorrect installation or use can lead to serious injury and will void manufacturer’s liability and warranty.
It is important for the safety of persons to follow the enclosed instructions. Save these instructions for future reference.
•
Do not expose to water, moisture, humid and damp environments or extreme temperatures.
•
Persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge
should not be allowed to use this product.
•
Use or modification outside the scope of this instruction manual will void warranty.
•
Installation and programming to be performed by a suitably qualified installer.
•
Follow installation instructions.
•
For use with motorized shading devices.
•
Keep away from children.
•
Frequently inspect for improper operation. Do not use if repair or adjustment is necessary.
•
Keep clear when in operation.
•
Replace battery with correctly specified type.
Rollease Acmeda declares this equipment is in compliance with the essential requirements and other relevant provisions of
R&TT EC Directive 1999/5/EC
Statement Regarding FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
Do not dispose of in general waste.
Please recycle batteries and damaged electrical products appropriately.
4 | Automate Programming Instructions | 15 Channel Remote
™
5005833
3
INSTALLATION
3.1
Remote battery
Remove cover from remote press gently in and
down to disengage cover.
Install battery with positive (+) side facing up.
Slide to remove
Snap covers back together.
3.2
Wall mount holder
Remove cover from base by prying with flat head
screwdriver.
Use supplied fasteners and anchors to attach the
base to the wall.
Use supplied fasteners and anchors as needed to attach the base and cover.
Switch is held in position magnetically and can be removed as desired.
Safely dispose of any unused plugs.
Automate™ Programming Instructions | 15 Channel Remote | 5
4
FUNCTIONAL OVERVIEW
4.1
Buttons
LEVELING UP
LEVELING DOWN
CHANNEL UP
CHANNEL DOWN
UP
DOWN
STOP
LOCK
SETTING (P2)
4.2
Leveling Control
The leveling control buttons and LCD display can be used to visualize and accurately set your preferred shade
position. When used to control a group of shades, they will all perfectly align to the same position.
Press LEVELING DOWN to step via increments
Press LEVELING UP to step via increments
Hold LEVELING DOWN to scroll continuously
Hold LEVELING UP to scroll continuously
6 | Automate™ Programming Instructions | 15 Channel Remote
4.3
Selecting a channel
Press CHANNEL UP to step via increments
through the channels 1 - 15
Press CHANNEL DOWN to step via increments
through the channels 15 - 1
Hold CHANNEL UP to scroll continuously
through the channels 1 - 15
Hold CHANNEL DOWN to scroll continuously
through the channels 15 - 1
IMPORTANT
One channel must be selected at all times.
You can cycle through 1-15 by pressing only CHANNEL UP or you use the CHANNEL DOWN button to cycle in reverse or a
combination of both.
4.4
Group control using channel "0"
Channel "0" is pre-set to control ALL shades paired within your multi-channel remote. To create customized
group channels, refer to section 6.
Automate™ Programming Instructions | 15 Channel Remote | 7
5
PROGRAMMING
5.1
Protocol selection
This device can be configured to operate Rollease Acmeda line "EL" motors. 				
(The default mode is ARC protocol.)
To toggle between ARC & EL modes, follow the following steps.
Hold P2 whilst inserting the
battery
Screen flashes x 5
Display Response
Screen Flashes "1" = ARC MODE
Screen Flashes "2" = EL MODE
5.2
Using motor P1 button
IMPORTANT
Multiple motors can be grouped onto shared channels for co-ordinated control. Limit settings and favorite positions cannot be adjusted when
motors are grouped together.
• Confirm that motor limits and favorite position are already set for each individual motor.
• Ensure that each motor you want to group is also assigned to another channel by itself
Select a channel on switch
using the CHANNEL UP or
CHANNEL DOWN button(s).
Hold P1 button on motor
head.
Hold STOP on switch.
OR
Motor Response
Motor Response
RELEASE P1
Approx.
8 | Automate™ Programming Instructions | 15 Channel Remote
Approx.
5.3
Using pre-existing controller
A = Existing controller or channel (to keep)
B = Controller or channel to add or remove
Select channel that operates
motor on existing remote.
Press P2 a second time on
existing remote.
Press P2
Motor Response
5.4
Select desired channel on new
remote.
Press P2 on new remote.
Motor Response
Motor Response
Hide Unused Channels
Your multi channel remote can be configured to have anywhere between 1 to 15 visible channels.
Inactive channels will not be visible when scrolling through the channel selection.
Hold CHANNEL UP and
CHANNEL DOWN for 5 seconds
Press CHANNEL UP or
CHANNEL DOWN to select
number of channels
OR
Display Response
Press STOP for 2 seconds
Display Response
IMPORTANT
Repeat steps and select 15 as desired number of channels to access all channels.
Automate™ Programming Instructions | 15 Channel Remote | 9
6
INITIAL SET UP
6.1
Check motor direction
To check travel direction of shade, press UP or
DOWN on controller.
To reverse shade direction, hold both
UP AND DOWN until the motor responds.
OR
Quick Press = Step
Long Press = Continuous Travel
Motor Response
Approx.
IMPORTANT
IMPORTANT
Damage to shade may occur when operating motor prior to
setting limits. Attention should be given.
Reversing motor direction using this method is only possible
during initial set-up
Direction change will not occur if switch is locked. 		
See Section 6.3.
6.2
Set Limits
To save upper limit, hold UP AND STOP.
Move shade to the desired highest or lowest
position by pressing the UP or DOWN buttons
on controller.
OR
To save lower limit, hold DOWN AND STOP.
IMPORTANT
Cycle shade up and down prior to setting limits to settle fabric
Initial set-up is not complete
Motor Response
Approx.
5 SECS
IMPORTANT
IMPORTANT
After setting limits, motor will automatically exit from initial
set-up mode.
For systems using FT Motors & the Ultra Lock, the bottom limit should be set ~ 1.38 in. (35mm) below the Ultra-Lock to disengage the auto
lock mechanism when the shade is raised.
10 | Automate™ Programming Instructions | 15 Channel Remote
6.3
Locking the Limit Setting Function
Stops unwanted changes to limit settings
Press LOCK and hold
for 5 seconds
Release LOCK
button.
Press LOCK and hold
for 5 seconds
Locked limit
settings
Remote Response
Approx.
Remote Display
Release LOCK
button.
Unlocked limit
settings
Remote Response
Approx.
Remote Display
IMPORTANT
The locked setting will prevent any multi-button functions. These include reversing direction before setting limits, limit setting and toggling
between tilt and roller modes.
Automate™ Programming Instructions | 15 Channel Remote | 11
7
ADJUSTING LIMITS
7.1
Adjust Upper Limit
Hold UP AND STOP
on controller.
Move shade to the desired
highest position by pressing
the UP button.
To save upper limit, hold
UP AND STOP.
Motor Response
Approx.
7.2
Motor Response
5 SEC S
Approx.
5 SEC S
Adjust Lower Limit
Hold DOWN and STOP
on controller.
Move shade to the desired
lowest position by pressing
the DOWN button.
To save lower limit, hold
DOWN and STOP.
Motor Response
Approx.
5 SEC S
Motor Response
Approx.
5 SEC S
IMPORTANT
For systems using FT Motors & the Ultra Lock, the bottom limit should be set ~ 1.38 in. (35mm) below the Ultra-Lock to disengage the auto
lock mechanism when the shade is raised.
12 | Automate™ Programming Instructions | 15 Channel Remote
8
FAVORITE POSITIONING
8.1
Set a Favorite Position
Move shade to the desired position by pressing the UP or DOWN button on the controller.
OR
Press P2 on controller.
Motor Response
8.2
Press STOP on controller.
Motor Response
Press STOP on controller.
Motor Response
Send Shade to Favorite Position
Approx.
8.3
Delete Favorite Position
Press P2 on controller.
Motor Response
Press STOP on controller.
Motor Response
Press STOP on controller.
Motor Response
Automate™ Programming Instructions | 15 Channel Remote | 13
9
TROUBLE SHOOTING
Problem
Motor is not responding
Cannot set limits on a single
motor (multiple motors
respond)
Cause
Remedy
Remote battery is discharged
Replace battery
Battery is inserted incorrectly
Check battery polarity
Radio interference / Shielding
Ensure remote is positioned away
from metal objects and that aerial on
motor or receiver is kept straight and
away from metal.
Receiver distance is too far
from remote
Move remote to a closer position or
consider a repeater for improved
performance.
Power failure
Check power supply to motor is
connected and active.
Incorrect motor wiring
Check wiring is connected correctly
(refer to motor installation
instructions).
Using channel 0 to adjust
motor limits
Always reserve an individual channel
for programming functions.
Reset the motor and begin
programming sequence again.
Motor will not go down after
setting the top limit.
Top limit was set using the
DOWN and STOP buttons.
Motor will pair, but can not set
limits.
Switch is in a locked state.
Control must be unlocked
to set limits or perform any
multi-button functions.
14 | Automate™ Programming Instructions | 15 Channel Remote
Remember that upper limit is to be
set using the UP and STOP buttons,
and the down limit is set using the
DOWN and STOP buttons.
Press and hold LOCK button for 5
seconds, until locked state changes.
10
NOTES
Automate™ Programming Instructions | 15 Channel Remote | 15
16 | Automate™ Programming Instructions | 15 Channel Remote

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c143 79.161424, 2017/09/22-11:52:47
Create Date                     : 2018:06:25 10:23+10:00
Metadata Date                   : 2018:06:25 10:23:05+10:00
Modify Date                     : 2018:06:25 10:23:05+10:00
Creator Tool                    : Adobe InDesign CC 13.1 (Windows)
Instance ID                     : uuid:e83a1315-4c1c-40e4-b70c-536b8f86c4a9
Original Document ID            : xmp.did:6f258793-ffcb-4547-bdae-7c9b8ad31554
Document ID                     : xmp.id:0eab2003-090c-414b-92f3-547bd1199ceb
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:4f3af549-5b5f-3a4f-a835-bb5280704f8c
Derived From Document ID        : xmp.did:dc128227-64af-6f4a-820e-6dbcf40e9d05
Derived From Original Document ID: xmp.did:6f258793-ffcb-4547-bdae-7c9b8ad31554
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 13.1 (Windows)
History Changed                 : /
History When                    : 2018:06:25 10:23+10:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 16
Creator                         : Adobe InDesign CC 13.1 (Windows)

EXIF Metadata provided by EXIF.tools