RoyalTek RN2BF PORTABLE NAVIGATION DEVICE User Manual
RoyalTek Company Ltd. PORTABLE NAVIGATION DEVICE Users Manual
RoyalTek >
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1121225 |
| Application ID | zqtSoiirgOXUZZSDeC2ixw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 130.5kB (1631220 bits) |
| Date Submitted | 2009-06-08 00:00:00 |
| Date Available | 2009-06-09 00:00:00 |
| Creation Date | 2009-05-20 10:51:59 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2009-06-02 09:40:22 |
| Document Title | Microsoft Word - RN2_User's manual_English_200900417.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | levenhuang |
RoyalTek RN2_Series Portable Navigation Device Reference Manual Legal Notices Copyright RoyalTek RN2 Portable Navigation Device User’s Guide Original issue: February 2009 RoyalTek and the RoyalTek logo are registered trademarks of RoyalTek Inc. Other products or system names appearing in this document are trademarks or registered trademarks of their respective owners. Further, the © or TM symbols are not used in the text. Changes may be made periodically to the information in this publication without obligation to notify any person of such revision or changes. Such changes will be incorporated in new editions of this User’s Guide or supplementary documents and publications. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopy, recording, or otherwise, without the prior written permission of RoyalTek Inc. DISCLAIMER AND LIMITATION OF LIABILITY RoyalTek and its subsidiaries make no representations or warranties, either expressed or implied, with respect to the contents here of and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose. RoyalTek and its subsidiaries assume no responsibility for any damage or loss resulting from the use of this RoyalTek RN2 Portable Navigator. NOTE：Record the device ID, serial number, purchase date, and place of purchase information in the space provided below. The serial number is indicated on the label affixed to your RoyalTek device. All correspondence concerning your unit should include the serial number, device ID, and purchase information. Revision: 2.00 February 2009 NOTE: Information in this manual is subject to change without notice. Warnings and Notices For your safety, do not operate the controls of the product while driving. GPS satellite signals cannot typically pass through solid materials (except glass). GPS location information is not typically available inside buildings, tunnels, or underground parking lots. A minimum of 4 GPS satellite signals is needed to calculate your GPS position. Signal reception can be affected by weather events or overhead obstacles (e.g. dense foliage and tall buildings). Other wireless devices in the vehicle may interfere with the reception of satellite signals and cause the reception to be unstable. Adapter Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture. Do not use the adapter if the cord becomes damaged. Connect the adapter to the proper power source. The voltage requirements are found on the product case and/or packaging. Battery This unit contains a non-replaceable internal Li-polymer battery. The battery could be bursting or exploding and releasing hazardous chemicals in case of over battery specification and using in an abnormal conditions; disassemble, crush, puncture, or dispose of the battery in fire or water. Abnormal operation could be dangerous to your human body. Please be aware. Use only the specified charger approved by the manufacturer. Risk of explosion if battery is replaced by an incorrect type dispose of used batteries according to the instructions. WARNING: The Lithium-Ion battery in the device must be recycled or disposed of properly. FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT The RN2 PND has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device generates, uses, and can radiate radio-frequency energy. If it is not installed and used properly, it may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Declaration of Conformity(R&TTE directive 1999/5/EC) The following items were completed and are considered relevant and sufficient: ‧ Essential requirements as in [Article 3] ‧ Protection requirements for health and safety as in [Article 3.1a] ‧ Testing for electric safety according to [EN 60950] ‧ Protection requirements for electromagnetic compatibility in [Article 3.1b] ‧ Testing for electromagnetic compatibility in [EN 301 489-1] & [EN 301] ‧ Testing according to [489-17] ‧ Effective use of the radio spectrum as in [Article 3.2] ‧ Radio test suites according to [EN 300 328] CE Mark Warning This is a Class B product, in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Table of Contents Chapter 1 Features and Specifications............................................................................8 1.1 RoyalTek RN2 PND features ......................................................................8 1.2 RN2 Specifications .......................................................................................8 Chapter 2 Getting Started...........................................................................................10 2.1 Hardware overview....................................................................................10 2.1.1 Packing list..........................................................................................10 2.1.2 Front Panel .........................................................................................12 2.1.3 Car holder...........................................................................................13 2.2 Using the mounting bracket......................................................................14 2.3 Additional Application with the Optional SKU ......................................17 Chapter 3 Using the RN2 ............................................................................................19 3.1 3.2 3.3 3.4 3.5 3.9 3.10 3.11 RN2 Operating Basics................................................................................19 To turn on the device:................................................................................19 To configure system settings:....................................................................19 Additional System settings ........................................................................23 Reset ............................................................................................................23 To set the favorite application category: .................................................29 Power Supply..............................................................................................29 Charge.........................................................................................................30 3.11.1 Discharge .....................................................................................30 3.11.2 Power outage................................................................................30 Chapter 4 Entertainment ............................................................................................32 4.1. 4.2. RN2 Multimedia Player.............................................................................32 Music player ...............................................................................................32 Using the Music player.......................................................................32 4.2.1. 4.2.2. To enter into the different media players. ........................................32 4.3. Photo Viewer ..............................................................................................36 4.3.1. Viewing files in Slide Show mode......................................................36 4.3.2. Using the Photo Album ......................................................................36 4.4. Video Player ...............................................................................................38 4.4.1. Use Video Player .............................................................................38 4.5. Listen MP3 via Car Audio/Stereo (FM Transmitter).............................40 4.5.1 Turn on FM Transmitter frequency ..................................................40 4.5.2 Change FM Transmitter frequency ..................................................41 Chapter 5 Communications.......................................................................................42 5.1. 5.2. RN2 Bluetooth (Option function) .............................................................42 Connection ..................................................................................................42 5.3. Mobile phone connection...........................................................................42 5.4. Call Out (Hands – free Calling)................................................................44 5.5. Contacts (Import phonebooks) .................................................................46 Chapter 6 Troubleshooting and Maintenance ..............................................................47 6.1. General troubleshooting............................................................................47 6.1.1. If your device does not respond, do a “hard reset.” ........................47 6.1.2. Users can also perform a “system reset.” .........................................47 6.1.3. Screen responds slowly ......................................................................47 6.1.4. Inaccurate response to taps. ..............................................................47 6.1.5. Connection Problems with PC. .........................................................47 6.1.6. No GPS connection.............................................................................47 6.1.7. No sound coming from the device. ....................................................47 6.1.8. Can’t I see my photos.........................................................................48 6.1.9. Takes longer than normal time to get a GPS fix..............................48 6.1.10. Factory reset does mean a GPS reset................................................48 6.2. Maintenance ...............................................................................................49 6.2.1. Storage precautions............................................................................49 6.2.2. Accessories and repair precautions ..................................................49 Chapter 1 Features and Specifications 1.1 RoyalTek RN2 PND features The RoyalTek RN2 Portable Navigation Device is a powerful multifunction GPS/multimedia navigation and entertainment device. • Compact size and lightweight • Integrated GPS receiver for GPS navigation • High-resolution color LCD • 4.3” wide touch screen with 320 x 240 x 16 bits • Multimedia functionality with high performance processor 1.2 RN2 Specifications Table 1: RN2 dimensions and specifications Category Item Chassis Dimension Weight 117mmx77.4mmx11.55mm for 520 mAh 117mmx77.4mmx12.9 mm for 930 mAh 130g Operating Temperature: 0 ℃ to +55 ℃ Specifications Storage Temperature：-20 ℃ to + 70 ℃ System OS Windows CE 5.0 Core Version NAND Flash 1G or 2G I_NAND SDRAM 64MB Mobile DDR Display Screen Type TFT, Touch Panel Screen Size 4.3” Resolution 480x272x16bits (WQVGA) Backlight Yes, brightness with TSP 300 nits typical Touch Panel Yes, (Finger Tapped) Category Item Battery General 520mAhr. Li-Polymer/930 mAhr Li-ion ■520 mAhr Power ON (Default setting after factory reset) Under 4 hours charge from empty to full by AC adapter Under 4 hours charge from empty to full by car charger Power Suspend Recharge Time Under 2 hours charge from empty to full by AC adapter Under 2 hours charge from empty to full by car charger ■930 mAhr Power ON (Default setting after factory reset) Under 6 hours charge from empty to full by AC adapter Under 6 hours charge from empty to full by car charger Power Suspend Under 4 hours charge from empty to full by AC adapter Under 4 hours charge from empty to full by car charger Audio Earphone Yes (2.5mm) Speaker 1.0W mono speaker Hardware Button\Slot Micro SD Supports Micro SD Battery switch Yes (HW reset) FM Transmitter (Optional) 1) 88.2 to 107.8Mhz for EU market. Frequency 2) 88.2 to 107.8Mhz for US market 3) 76 to 90Mhz for Japan market 4) 88.2 to 107.8Mhz China market Audio input Digital stereo audio for internal audio Analog stereo audio if there is analog audio input Antenna PCB trace Restriction FM TX will be always off if BT hands free is working USB USB solution USB 2.0 device with supporting mass storage( High Speed) Chapter 2 Getting Started This chapter describes the hardware interface of the RoyalTek RN2 and its peripherals. Instructions for setting up the device and some basic system operations are also discussed. NOTE: Although the RN2 rechargeable Li-Polymer battery comes approximately 30% charged, before using, it is best to connect the AC adapter (Optional Accessory) or USB cable by PC connect and plug to power socket and fully charge the battery. The ON/OFF button will be orange when charging and green when change done. 2.1 Hardware overview This section introduces the RN2 PND external features and hardware components. 2.1.1 Packing list The RoyalTek RN2 box contains all of the items listed below： RN2 Portable Navigation Device Car mount Car holder Car charger 10 USB cable (Option Accessory) Earphone (Option Accessory) AC adaptor (Option Accessory) TMC Antenna (Optional Accessory). Dashboard (Option Accessory) Portable Navigation Device Application Software DVD/CD. Portable Navigation Device Quick Start Guide. Portable Navigation Device Warranty statement. 11 2.1.2 Front Panel Figure 1: Top and Left/Rights side views Table 2-1: Top and Left/Right side controls NO Function Power button Standby mode by pressing the button for sleep/wake. Indicated the battery charging status. Power status LED Green—fully charged or high battery. Orange—charging Battery Red—low Battery Micro SD Earphone USB port/Docking connector Battery Switch Accepts Micro SD storage cards, allows you use audio, image files stored in it for use with internal applications. Standard stereo headphone jack. For USB port: connects the device to computer running on the Microsoft Windows platform. Also serves as the power connector for charging the device. To do a hard reset of the device and suspend the battery 12 2.1.3 Car holder Figure 2: Car holder side views Table 2-2: Car holder No Function For USB port： Only serves as the power connector of charging, but mass USB Port/Docking connector storage function. Also, it can connect to external TMC module (Option part). For Docking connector: connects to car mount kit. 13 2.2 Using the mounting bracket. The RN2 comes with a car mount kit and a car charger to help install your device in your vehicle. The car mount kit uses a suction cup on the windshield to offer flexible mounting options for the RN2. Warning: Some countries prohibit the mounting of any electronic device on the vehicle dashboard. Be sure to check your local laws for acceptable mounting areas before installing the car mount bracket. This section shows how to install the car mount kit in your vehicle’s windshield using the suction cup. The RN2 uses a snap on mounting cradle to use when the device attaches to the car mount. Below is the backside view of the RN2 in the cradle. 1. Clean the mounting surface with a glass cleaner and a clean cotton cloth. 2. If the ambient temperature is below +15°C (60°F), you can warm the mounting area and the suction cup (e.g. with a hair dryer) to ensure a strong suction bond. 3. Install the car mount on the selected area. a. Press the suction cup of the car mount firmly against to the windshield. (See Figure 2-3-1) b. Press down the lever to fix the suction cup in place. c. Adjust the angles of the arm to your proper viewing position. Figure 2-3-1 4. Mounting the device holder with your RN2. a. Fit RN2 down in the device holder first, and then lock it using the plugs on the bottom of the device holder. (See Figure2-3-2) b. Firmly dock the RN2 with device holder on the car mount which has been mounted to your windscreen.(See Figure2-3-3) 14 Figure 2-3-2 Figure 2-3-3 5. Charging your RN2 device. a. Plug the car charger to the 12 V outlet of your car and then connect the charger cable to the Mini USB port of the RN2 car holder；Please make sure the battery switch status in “ON” mode. (See Figure 2-3-4) b. You now can let your RN2 have the continuous power by the car charger. 15 Figure 2-3-4 NOTE: Your car may be required to switch the vehicle ignition into the accessories position to power the cigarette lighter. Your RN2 will not charge with the ignition off. 6. Starting your RN2 a. Push the battery switch ON.(Default status OFF) b. Press the power button to turn on your RN2, then the main menu screen appears. c. Tap Navigation, you will see the map screen displayed. d. Please read the User’s Guide of Navigation software for the detail setting information. Please be noted, the first time turning on your RN2 may take some time to obtain a valid GPS fix. 16 2.3 Additional Application with the Optional SKU 1. TMC Accessory (only available in certain areas) You may use external TMC accessory to perform TMC function when you are in a TMC Traffic signal available areas. Please visit: www.tmcforum.com for the TMC Coverage information, Please connect the TMC accessory to the USB port of RN2 for the TMC application and be placing the TMC accessory in a place which will not interfere to the driving safe. (See Figure 2-4-1) Please refer to the User’s Guide of Navigation software for the detail TMC operating information. Figure 2-4-1 Disclaimer Please be noted that RoyalTek Company Ltd. and the licensed Navigation Software are not responsible for any damage caused by an accident due to unreliable TMC radio transmissions by national, regional, or local broadcasters caused by TMC service restrictions, or by natural and man-made conditions that prevent real-time information from being delivered to the device. The both companies are not responsible for the quality or accuracy of the events broadcast. Resetting the RN2 Device You should less than seldom need to reset your RN2 under normal circumstances. However, in the event that a problem cannot be corrected, you may reset the RN2 device by the following way： Hard reset： • To do a “Hard reset” Disconnect all cables, including the AC adapter, from your device. By sliding the hard reset switch on the primary ON/OFF switch on the right side of the device from OFF to ON position then tap the power button.(see Figure 2-4-2) Figure 2-4-2 17 Figure 2-4-3 18 Chapter 3 Using the RN2 3.1 RN2 Operating Basics After fully charging the RN2 it is ready to be used. You can now turn it on and proceed to system settings configuration. 3.2 To turn on the device: 1. Sliding the battery switch to “ON”. (Default status OFF) 2. Turn on your device by pressing the power button on the top right panel of the device. After turn on the device, main page will display. This is also referred to the Favorite page. 3.3 To configure system settings: If you intend to start using your RN2 at once, we recommend that you configure the language and time zone settings first. The rest of the user preferences can be set up later. 1. Tap “System” in the right category bar 19 . 20 2. Tap “Language” on the System page. 3. It will display current language in central area. 4. To drag wheel scroll language tags. 5. To set the system time zone, tap “Time Zone” in System Menu. 6. Tap the 7. icon to set up the function of daylight saving s time. a. represent enable the function of daylight savings time. b. represent disable the function of daylight savings time. Drag the Map to adjust the time zone. 21 22 3.4 Additional System settings Other system settings can be used to view and adjust your device current preferences. Navigate from the System Menu. 3.5 Reset GPS Reset:：When user wonder if GPS receiver perform properly or not .( ex : Change the region) Factory Reset：The factory reset function not only resets the operating system settings to default factory values, but also reset the GPS settings. Calibration：When the touch screen does not respond well, calibrate the screen of your device. Tap the “Reset” icon in the System Menu. Tap the “GPS Reset” icon in the Reset Menu. Tap the “YES” to reset the GPS. 23 24 3 Tap the “Factory Reset” icon in the Reset Menu. Tap the “YES” to do the Factory Reset. Tap the “Calibration” icon in the Reset Menu. Tap on the center of the target. Repeat as the target moves around the screen. 25 3.6 System Information 1. Tap the Sys Info. icon in the System Menu. 2. 3.7 You can view the OS version, GPS firmware version and other system information.. Volume 1. Tap the Volume icon in the System Menu. 3. To adjust the volume by drag the wheel. 4. Drag to left will become silent else will become noisy. 26 27 3.8 Backlight 1. Tap the Backlight icon in the System Menu. 2. Adjust the Backlight brightness by drag triangle icon. 3. Drag to left will become dark, drag to right will become light. 28 3.9 To set the favorite application category: Otherwise, provide more organized and friendly application management interface for user organize their own favorite application category by drag-and-drop, the maximum number of favorite application shortcut is 6. Add icon to the favorite page 1. Drag the icon to the category bar of favorite. 2. That will show the icon in favorite page. Delete icon to the favorite page 1. Drag the icon from Favorite page to category bar and drop it. Confirm dialog will pop up, just tap “YES” to delete. 3.10 Power Supply 29 RN2 has a completive power management system, and enhances its standby time. In addition, it can make end-users more convenient to carry it for entertainment purpose, not only using in cars but also at home, outdoor activities. 3.11 Charge While end-users use our standard car charger or AC adapter to charge RN2, the main screen would remind you. 3.11.1 Discharge While end-users remove out our standard car charger or AC adapter, the main screen would remind you to turn off RN2 or not. 3.11.2 Power outage While battery capacity is lower than 20%, the main screen would remind end-users the following message. 30 31 Chapter 4 Entertainment 4.1. RN2 Multimedia Player The RN2 is a fully capable multimedia player that can enhance your portable entertainment. In addition to its navigating function, the RN2 is also a mobile entertainment tool to let you enjoy digital music, view photos. These functions make the RN2 a true multimedia device. To enable access of multimedia files from your device’s mass storage folder and transfer these files, do either of the following: • Using the USB cable to connect the device to your computer, and then use File Explorer to copy digital music and image files into the device’s MyflashDisk folder. • Using a compatible card reader, directly copy digital music and image files to the Micro SD card. It is recommended to organize files into subfolders. These folders will make files easier to find and play. 4.2. Music player Enjoy your favorite music on the road. The program features: • Support for MP3 files • Auto-scanning of supported files in the device’s Micro SD card • Separate volume control enabling you to adjust the playback sound level while retaining the volume level set for system sounds Each sub directory containing compatible music files is treated as an individual playlist. For a more organized file search, it is advisable to named sub directories based on genre or listening preferences. 4.2.1. Using the Music player. 4.2.2. To enter into the different media players. 1. Tap “Music” icon in the Main Menu. NOTE: You can also enter the music player by right category bar. The MP3 player window below controls playback. 32 1 ○ ○ ○ ○ ○ Table 4-3-2-1: MP3 player functions NO Function Return Return to list page Songs List all song by alphabet Album List all albums by alphabet. Artist List all Artists by alphabet Search Current play list 33 2. Tap the song on the music list. 3. Tap bottom information bar will switch to song’s progress. 34 9 ○ ○ ○ ○ ○ ○ ○ ○ 5 ○ Table 4-3-2-2: Play sound functions NO Function Play/Pause P/ay/Pause song Forward Forward to next song. Previous Reword to previous song Stop Stop music play. Repeat Repeat play songs. Random Random play songs. Sound bar To adjust the sound. No even: This place will scroll song’s name and total play time. Bottom info. bar Tap: Tap this bar. Will switch to song’s progress. Return Return to list page. 35 4.3. Photo Viewer The RN2 has a great photo viewing option that makes it easy to share and view digital photos anywhere on the go. The program features: • Support for JPEG files (Support Max. 500 photos) • Auto-scanning of supported files in the device’s Micro SD card & Flash disk • Three viewing modes: Thumbnail, Full Screen, and Slide Show • Album support based on sub-directory contents Each subdirectory can hold multiple images and be used as an individual album. For a more organized file search, it is advisable to sort image files into sub directories based on meaningful name or date. An example could be “summer vacation pictures” or “New baby” or “2005 Best.” 4.3.1. Viewing files in Slide Show mode You have the option to view images in a slide show much like viewing a Power- Point presentation in your computer. Images are adjusted to fit the entire display area and are shown in a 5-second interval. 4.3.2. Using the Photo Album 1. Tap “Photo” icon in the Main Menu. 2. Will list all thumbnails in SD card and store in PND mass storage & SD folder. 3. Drag all screen area will cause photo move to next or previous page 36 4. Tap specific thumbnail will enlarge thumbnail. 5. Tap the screen will cause control bar display ○ ○ ○ ○ ○ Table 4-3-4-1: Photo Album Viewer NO Function Return Return to thumbnail page Previous page Display previous photo. Auto Play mode Auto play all photos. Next page Display next photo. Rotate Rotate photo 37 4.4. Video Player Video Player is a very unique function in RN2, which can make end-users enjoy your DIY video via this device. The program features: • Support VMV/WMA files (Maximum 500 files) • Auto-scanning of supported files in the device’s Micro SD card • Three viewing modes: Thumbnail, Full Screen, and Slide Show • Album support based on sub-directory contents 4.4.1. Use Video Player 1. Tap “Video” icon in the Main Menu. 2. Tap “Accept” icon to enter Video Player function screen, or tap “Cancel” not to enter into. 3. Tap “File Manager” to choose a file, which you would like to play. 38 4. Tap “Play” to play the file which you choose. Table 4-4-1-1: Video Player Display NO Function Play Play a video file Pause Pause to play a video file Forward Downward Volume down Turn down volume 39 6 Volume up File Manager Turn up volume List video files Progress Show playing progress (Tap or drag to control playing bar progress) Return Return to the previous page 4.5. Listen MP3 via Car Audio/Stereo (FM Transmitter) RN2 has a great music-player-supported function that makes you play MP3 files via your car audio/stereo. • Set FM frequency range from 88.2 to 107.8Mhz 4.5.1 Turn on FM Transmitter frequency 1. 2. 3. 4. Tap the Volume icon in the System Menu. Tap “FM” to open FM Transmitter function Set FM frequency 88.2 MHz in your car radio. Play “Music Player”, “Video player” or “Navigation”, and audio will be come out from your car radio. NOTE：there is a sign to remind end-user that FM Transmitter function is open on the main menu. Table 4-4-1-1: FM Transmitter Setting NO Function Description FM Transmitter Open FM Transmitter function 40 2 Stop Stop FM Transmitter function Frequency Set frequency (Default: 88.2 MHz) 4.5.2 Change FM Transmitter frequency 1. Tap frequency entry 2. Set the frequency number, and tap “Enter” 3. Set the same frequency number to make your car radio receive audio from RN2. Table 4-4-2-1: FM Frequency Setting NO Function Description Delete Delete frequency number Enter Implement this frequency number NOTE：FM Frequency can only set from 88.2 to 107.8Mhz. 41 Chapter 5 Communications 5.1. RN2 Bluetooth (Option function) Once your Bluetooth-enabled mobile phone is paired with your RN2, you can make hands-free phone calls through your RN2’s integrated micro- phone and speaker. RN2 makes it easy to make and receive phones calls with ease while end-users drive cars. Hands-free calling keeps things safe, letting you keep your eyes on the road, while your RN2 integrates seamlessly with your mobile phone. Easy to connect and use, just follow a few quick steps to enjoy the benefits of Hands- free calling. (That is option function) 5.2. Connection NOTE：Make sure the Bluetooth settings of your mobile phone. The Bluetooth switch is set to “ON” or “enable”. The visibility is set to “Discoverable”, “Show my phone”, (For more detailed information, see your phone’s manual.) 5.3. Mobile phone connection 1. Tap “Settings” to turn on Bluethooth function, and end-users can also turn on “Automatic Answer” while the mobile phone is ringing. 42 NOTE：”Automatic Answer Time” can be set three mode “3sec.”, “10sec.”, and “30sec.” 1. Back to “Communication” screen, and tap “Connection” 2. Tap “Search” to look for Bluetooth on of mobile phones, and 3. Choose one which you want to connect to, and tap “Connection” 43 4. Choose “HFP” 5. The mobile phone will often require you to enter a password to connect the device. Enter “0000” on the mobile phone in this case. 6. When the connection completes, the name of the connected phone is displayed on the title bar of the “communications” screen. NOTE：If the connected mobile phone has the Bluetooth auto-accept function, set this function to “NO” (For more detailed information, see your phone’s manual. NOTE：Bluetooth function has distance limitation. While the mobile phone is away, and make Bluetooth function disconnect, NS-4102 would try to re-connect within 10 seconds. NOTE： While end-user is turning on FM Transmitter and Bluetooth Hands-free function (connecting with a cell phone), call conversation would still come out from NS-4102 speaker, not from car audio/stereo. 5.4. Call Out (Hands – free Calling) 1. Tap “Call-out” screen is as follows: 44 2. Call-out ○ ○ ○ No. Name Description Start to make a call. History Call-out from the history of the incoming /outgoing call Contacts Call-out from the contacts. In detail, refer to 4.3. 3. Call-out (in a phone call) ○ No. 4. Name Description Close a phone call. Receiving a call (1) When the connected mobile phone receives a call, the caller’s phone number and two buttons are displayed on the screen. 45 (2) Receive a call, tap ; Quit a call, tap 5.5. Contacts (Import phonebooks) 1. Tap “Contacts” screen is as follows: 2. Tap “Import” to import the contact information from the connected mobile phone. 46 Chapter 6 Troubleshooting and Maintenance 6.1. General troubleshooting 6.1.1. If your device does not respond, do a “hard reset.” To do a “hard reset,” Disconnect all cables, including the AC adapter, from your device. By sliding the hard reset switch on the primary ON/OFF switch on the right side of the device form OFF to ON position then tap the power button. 6.1.2. Users can also perform a “system reset.” To do a “system reset,” in the Main menu, tap System, then tap System Info. This will allow you to do a factory reset (restore to default set- tings), reset the GPS and recalibrate the touch screen interface. 6.1.3. Screen responds slowly Make sure you have enough battery power. 6.1.4. Inaccurate response to taps. • Recalibrate the touch screen. 6.1.5. Connection Problems with PC. Make sure that the cable is securely plugged into the USB port on your computer and on the device. Connect the USB cable directly to your computer—do not run the cable through a USB hub. Reset your device before connecting the cable. Always disconnect your device before you restart your computer. 6.1.6. No GPS connection Make sure that the GPS antenna has a clear view of the sky. Note that the GPS reception can be affected by: Bad weather Dense overhead obstacles (e.g. trees and tall buildings) Other wireless devices in the car 6.1.7. No sound coming from the device. Make sure mute is not selected for Volume in system settings. The built-in speaker turns off when the headphone jack is being used. 47 6.1.8. Can’t I see my photos. Make sure you are using supported image formats JPG. 6.1.9. Takes longer than normal time to get a GPS fix. If the previous GPS fix position was more than 500 km or 12 hours apart from your current position and time, it will also take significantly longer than the standard TTFF time to get a GPS fix. This is due to the nature of the GPS algorithm and rotational velocity between the satellites and planet Earth, and deemed normal. Perform a GPS reset in the main/system/system info menu to get a faster GPS fix. 6.1.10. Factory reset does mean a GPS reset. Yes. The Factory Reset function resets the OS settings to their default factory values and it will reset the GPS settings. 48 6.2. Maintenance • • Avoid exposing your device to direct sunlight or strong ultraviolet light for extended periods of time. • Do not drop your device or subject it to severe shock. Do not subject your device to sudden and severe temperature changes. This could cause moisture condensation inside the unit, which could damage your device. In the event of moisture condensation, allow the device to dry out completely before use. • The screen surface can be easily scratched. Sharp objects may scratch the screen. You may use non-adhesive generic screen protectors designed specifically for use on portable devices with LCD panels to help protect the screen from minor scratches. Never clean your device with it powered on. Never use organic solvents such as benzene or paint thinner to clean your device. Use of these solvents can cause deformation or discoloration. Use a soft, clean, lint-free cloth to clean the display screen. Moistened LCD screen wipes could also be used as required. • Never attempt to disassemble, repair or make any modifications to your device. Disassembly, modification or any attempt at repair could cause damage to your device and even bodily injury or property damage and will void any warranty. 6.2.1. Storage precautions • Do not store your device anywhere it may be exposed to water or in conditions of high humidity. • When the device is not in use for an extended period of time, bring it indoors and store it in cool dry area. 6.2.2. Accessories and repair precautions • Only authorized accessories should be use with the device. The use of incompatible accessories could result in bodily injury and/or damage to the device. • The use of unauthorized accessories will also void your warranty. • Never attempt to disassemble, repair or make any modification to your device. 49
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : levenhuang Create Date : 2009:05:20 10:51:59+08:00 Modify Date : 2009:06:02 09:40:22+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2009:06:02 09:40:22+08:00 Producer : Acrobat Distiller 9.0.0 (Windows) Format : application/pdf Title : Microsoft Word - RN2_User's manual_English_200900417.doc Creator : levenhuang Document ID : uuid:1d10fce8-41d6-4f45-8f64-109d748d642c Instance ID : uuid:69c5b87d-ef48-4820-bd7c-c064303221ad Page Count : 49EXIF Metadata provided by EXIF.tools