Royqueen Audio Technology BASSONIX Bluetooth Speaker User Manual PROOF ISOUND 6770 BASSONIX UG

Download:
Mirror Download [FCC.gov]
Document ID	2648906
Application ID	68DB74tR/y8rkeGdp/8S6A==
Document Description	15_ISOUND-6770 UserMan
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	28.58kB (357265 bits)
Date Submitted	2015-06-16 00:00:00
Date Available	2015-06-16 00:00:00
Creation Date	2015-04-17 17:02:51
Producing Software	Adobe PDF library 11.00
Document Lastmod	2015-06-09 14:46:11
Document Title	PROOF_ISOUND-6770 BASSONIX_UG
Document Creator	Adobe Illustrator CC 2014 (Macintosh)

ISOUND-6770
User guide
Guide de l'utilisateur
Guía de usuario
FCC ID:2ADORBASSONIX
www.isound.com
ENGLISH
Includes
Bassonix, remote, charge cable, audio cable, and user guide
Bluetooth® button
Volume buttons
Mode button
AUX IN
Power switch
Charge port
Scan button
Track buttons
Play/pause button
Power button
Scan button
Track back
Volume down
Digital keypad buttons
Mode button
Bluetooth® button
Volume up
Track forward
Play/pause button
Confirm button
Specifications
Driver size: 52mm x 2
Output power: 8W (4W x 2)
Bluetooth® v4.0, up to 30 foot transmission range
Battery: 2,600mAh
Play time: Up to 8 hours at 70% volume
Charge time: 4 hours
Frequency response: 100 Hz - 20 kHz
Impedance: 4Ω
Speaker button functions
Bluetooth button
• Press and release to go into Bluetooth mode.
• Press and hold for 3 seconds to disconnect from Bluetooth
pairing (to allow another user to connect).
NOTE: You can only disconnect a device from Bluetooth while
in Bluetooth mode.
Mode button
• Press and release to cycle through the different modes.
Modes include:
• Bluetooth mode – To play wireless via Bluetooth
The screen panel will display “bL” when connected.
• AUX IN mode – To play via audio cable
The screen panel will display volume level and “AUX”.
• PC/speaker mode – To play music from your PC
(when plugged into a PC)
The screen panel will display “PC”.
• FM mode – To play music from FM radio
The screen panel will display the current FM radio station.
Scan button
• Press and hold for 3 seconds to enable the scan/channel
save function.
NOTE: The scan button only functions while in FM mode.
Track buttons
In Bluetooth/AUX IN mode:
• Press and release the track forward button to go to the next track.
• Press and release the track back button to go to the
beginning of the current track.
• Press and release the track back button twice to go to
the previous song.
In PC/speaker mode:
• Press and release the track forward button to go to the next track.
• Press and release the track back button to go to the
beginning of the current track.
In FM mode:
• Press and release/hold the track forward/previous track
buttons to search through FM radio stations.
Play/pause button
In Bluetooth/PC/speaker mode:
• Press and release to pause the current track.
• Press and release to play the current track.
In AUX IN/FM mode:
• Press and release to mute the current track.
• Press and release to play the current track.
NOTE: When listening to the radio in FM mode or playing music
via audio cable in AUX IN mode the play/pause button only
serves as a mute button. The track will still continue to play but
will remain muted until the play/pause button is pressed again.
Remote button functions
Power button
• Press and hold for 3 seconds to turn on the speaker.
• Press and hold for 3 seconds to turn off the speaker.
NOTE: The power button only sets the speaker to standby
mode. You must still use the power switch to completely turn
off the speaker.
Mode button
• Press and release to cycle through the different modes.
Modes include:
• Bluetooth mode – To play wireless via Bluetooth
The screen panel will display “bL” when connected.
• AUX IN mode – To play via audio cable
The screen panel will display volume level and “AUX”.
• PC/speaker mode – To play music from your PC
(when plugged into a PC)
The screen panel will display “PC”.
• FM mode – To play music from FM radio
The screen panel will display the current FM
radio station.
Scan button
• Press and hold for 3 seconds to enable the
scan/channel save function.
NOTE: The scan button only functions while in FM Mode.
Volume buttons
• Press and release/hold the volume up button to raise
the volume.
• Press and release/hold the volume down button to lower
the volume.
NOTE: The volume buttons only control the volume of the
Bassonix. Device volume should be adjusted separately.
Bluetooth button
• Press and release to go into Bluetooth mode.
• Press and hold for 3 seconds to disconnect from Bluetooth
pairing (to allow another user to connect).
NOTE: You can only disconnect a device from Bluetooth while
in Bluetooth mode.
Track buttons
In Bluetooth/AUX IN mode:
• Press and release the track forward button to go to the next track.
• Press and release the track back button to go to the
beginning of the current track.
• Press and release the track back button twice to go to the
previous song.
In PC/speaker mode:
• Press and release the track forward button to go to the next track.
• Press and release the track back button to go to the
beginning of the current track.
In FM mode:
• Press and release/hold the next/previous track buttons to
search through FM radio stations.
Play/pause button
In Bluetooth/PC/speaker mode:
• Press and release to pause the current track.
• Press and release to play the current track.
In AUX IN/FM mode:
• Press and release to mute the current track.
• Press and release to play the current track.
NOTE: When listening to the radio in FM mode or playing music
via audio cable in AUX IN mode the play/pause button only
serves as a mute button. The track will still continue to play but
will remain muted until the play/pause button is pressed again.
Digital keypad buttons
• Press numbers for specific FM radio stations while in FM mode.
NOTE: The digital keypad buttons only function while in
FM mode.
Confirm button
• Press the confirm button after you select a FM radio station
when using the digital keypad buttons in FM mode.
NOTE: The confirm button only functions while in FM mode.
Charging your Bassonix
NOTE: Make sure the Bassonix is fully charged before using it
the first time.
1. Carefully insert the Micro-USB end of the included charge
cable into the charge port labeled
2. Plug the USB A end of the cable into a powered USB port,
such as a computer, laptop or USB AC adapter (not included).
3. The LED indicator light located on the front of the speaker
will turn orange. Once the speaker is fully charged, the LED
indicator light will turn off.
NOTES:
• When the battery level is below 20%, you will hear a voice
saying “Battery level low” and the orange LED indicator light
on the front of the speaker will flash. Charge your Bassonix
with the included charge cable.
Connecting via Bluetooth® (first time set-up)
1. Move the power switch on the right side of the Bassonix to
the “ON” position and the speaker will say what mode it is in. If
the speaker is not in Bluetooth mode, press the mode button
until the speaker says “Bluetooth mode” and the screen panel
will flash red dash lines.
2. Open the settings on your Bluetooth device (Bluetooth must
be enabled).
3. Select Bassonix from the list of Bluetooth devices.
4. Once paired, you will hear “Bluetooth paired” and the screen
panel will show the letters “bL” and the Bluetooth symbol.
5. Volume can be adjusted separately from your device or
the speaker.
NOTES:
• Your device will automatically find and pair with the Bassonix
after the initial pairing. If your device does not automatically
pair, turn off the speaker and repeat steps 1-4.
• Sound will not play via audio cable if the speaker is in
Bluetooth mode.
• The volume buttons only control the volume of the Bassonix.
Device volume should be adjusted separately.
Connecting via audio cable
1. Move the power switch on the right side of the Bassonix to
the “ON” position and the speaker will say what mode it is in. If
the speaker is not in AUX IN mode, press the mode button until
the speaker says “AUX IN mode” and the screen panel shows
the volume level number and the word “AUX”.
2. Plug one end of the included audio cable into the AUX port
located next to the power switch.
3. Plug the other end of the cable into your audio device.
4. Volume can be adjusted separately from your device or
the speaker.
NOTES:
• Sound will not play via audio cable if the speaker is in
Bluetooth mode.
• When playing via audio cable in AUX IN mode the play/pause
button only serves as a mute button. The track will still
continue to play but will remain muted until the play/pause
button is pressed again.
• The volume buttons only control the volume of the Bassonix.
Device volume should be adjusted separately.
Connecting a computer or laptop via charge cable
1. Move the power switch on the right side of the Bassonix to
the “ON” position and the speaker will say what mode it is in. If
the speaker is not in PC/speaker mode, press the mode button
until the speaker says “PC/speaker mode” and the screen
panel shows the letters “PC”.
2. Carefully insert the Micro-USB end of the included charge
cable into the charge port labeled
3. Plug the USB A end of the cable into a PC computer or
laptop. The LED indicator will light up orange.
4. Volume can be adjusted from your speaker or computer.
NOTES:
• The speaker will also charge while plugged into a PC
computer or laptop.
• When you disconnect the Micro-USB cable from the speaker
when connected to a computer the speaker will automatically
go into Bluetooth mode.
• The volume buttons only control the volume of the Bassonix.
PC volume should be adjusted separately.
Using the FM radio (First time set up)
1. Move the power switch on the right side of the Bassonix to
the “ON” position and the speaker will say what mode it is in. If
the speaker is not in FM mode, press the mode button until
the speaker says “FM mode” and the screen panel shows an
FM radio station.
2. Press and hold the scan button on the speaker or remote for
three seconds and release for the speaker to begin the
scan/channel save function. The speaker will scan and save the
FM radio stations with the strongest frequency. Once it is
complete with the scan/channel save function the FM radio
will start on channel 01.
NOTE: You must allow the speaker to scan all FM radio stations
until complete.
3. Short press the track forward or back button on the speaker
or remote to browse through the saved channels.
4. Long press the track forward or track back button on the
speaker or remote to semi-auto scan FM channels. This allows
you to go to a FM radio station that was not saved in the
scan/channel save function.
5. You can also use the remotes digital keypad to type in the FM
radio station of your choice. For example, press numbers “8”, “7”,
and “8” and hit the confirm button to go to FM radio station 87.8.
NOTE: While playing in FM mode the play/pause button only
serves as a mute button. The FM radio station will still continue
to play but will remain muted until the play/pause button is
pressed again.
Troubleshooting
Issue: My speaker doesn’t turn on.
Solution: Try the following:
• Make sure that you fully charge your speaker before use.
• Turn the speaker off and then back on until you hear a voice.
• If you are using the remote, confirm the power switch on the
speaker is set to the “ON” position and the battery in the
remote is still in working condition.
Issue: My speaker isn’t charging.
Solution: Try the following:
• Make sure that the charge port on the speaker is free from
dust and debris.
• Make sure that you are using the charge cable that was
included with your speaker.
• Make sure there is power coming from the power source.
Issue: My speaker isn’t syncing to Bluetooth.
Solution: Try the following:
• Make sure you are on Bluetooth mode.
• Make sure that the Bluetooth setting is turned “ON” on
your device.
• Check to see if another user is connected to the speaker.
• Refer to the user guide of your device for Bluetooth syncing
instructions.
Issue: My speaker will not go to the FM radio station I selected.
Solution: Try the following:
• Make sure you are on FM mode.
• Make sure you have allowed the scan/channel save function
to complete before use of the FM mode.
• If you are using the remote, confirm the batteries are still in
working condition.
Issue: I selected my saved FM radio channel with the digital
keypad buttons, but it is not going to the channel I selected.
Solution: Make sure you are using the track forward/backward
buttons to find your saved FM radio channels. The digital
keypad buttons and confirm button can only be used to find a
specific FM radio station.
Issue: I brought my speaker on vacation but my FM radio
channels are not saved.
Solution: Make sure you fully run the scan/channel save
function before each use of the FM radio. FM radio frequencies
may change depending on location and each channel may vary.
Important safety precautions
• Incorrect use or incompatibility with your device may result
in reduced battery performance or damage to your device.
• Do not attempt to disassemble product.
• Tampering or removing the battery can result in damage to
your product, void of warranty, and could cause injuries.
• Store and operate between 32°F – 113°F.
• Do not allow this product to have contact with liquids.
• Do not place this product near a heat source or flame.
• Do not throw or shake.
• Do not operate if it has been subjected to shock or damage.
• Do not crush or puncture the battery.
• Recharge the internal battery every 3 months when not in
use to keep the battery in best condition.
• Use soft cloth to clean the exterior. Do not use harsh
chemicals or strong cleaning solvents.
• The internal battery must be recycled or disposed of
properly. Contact your local waste management office for
information on the proper disposal or recycling.
FCC information
This equipment has been tested and found to comply with the
limits for a Class B Digital Device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
This equipment complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This equipment may not cause harmful interference.
2. This equipment must accept any interference received,
including interference that may cause undesired operation.
Modifications not authorized by the manufacturer may void
the user’s authority to operate this device. This equipment
complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be
co-located or operating in conjunction with any other antenna
or transmitter.
Warranty information
All dreamGEAR/i.Sound products come with a limited warranty
and have been subjected to a thorough series of tests to
ensure the highest level of dependability and compatibility. It
is unlikely that you will experience any problem, but if a defect
should become apparent during the use of this product,
dreamGEAR warrants to the original consumer purchaser that
this product will be free from defects in material and
workmanship for a period of 120 days from the date of your
original purchase. If a defect covered by this warranty occurs,
dreamGEAR, at its option, will repair or replace the product
purchased at no charge. If a replacement is necessary and
your product is no longer available, a comparable product may
be substituted at the sole discretion of dreamGEAR.
This warranty does not cover normal wear and tear, abusive
use or misuse, modification, tampering or by any other cause
not related to either materials or workmanship. This warranty
does not apply to products used for any industrial,
professional or commercial purposes.
Service information
For service on any defective product under the 120-day warranty
policy, please contact Consumer Support to obtain a Return
Authorization Number. NOTE: dreamGEAR will not process any
defective claims without a Return Authorization Number.
Consumer support hotline
877-999-DREAM (3732) (U.S. and Canada only)
or 310-222-1045 (International)
Consumer support email
support@dreamgear.net
Websites
www.isound.com | www.dreamgear.com
Save a tree, register online
dreamGEAR/i.Sound is making the eco-friendly choice to have
all products registered online. This saves the printing of
physical paper registration cards. All the information you need
to register your recent dreamGEAR/i.Sound purchase is
available at: www.dreamgear.com/product-registration
www.isound.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : 3.1-701
Format                          : application/pdf
Title                           : PROOF_ISOUND-6770 BASSONIX_UG
Metadata Date                   : 2015:06:09 14:46:11+08:00
Modify Date                     : 2015:06:09 14:46:11+08:00
Create Date                     : 2015:04:17 17:02:51-07:00
Creator Tool                    : Adobe Illustrator CC 2014 (Macintosh)
Thumbnail Width                 : 184
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 23884 bytes, use -b option to extract)
Instance ID                     : uuid:95927dde-bb8b-4d87-b543-ae4b9f50138c
Document ID                     : xmp.did:5810b76c-d454-421e-9554-96457bd5bbfa
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:54d0c700-0cc8-4bec-8357-bf3d8e42edab
Derived From Document ID        : xmp.did:54d0c700-0cc8-4bec-8357-bf3d8e42edab
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:4808f8b0-3363-44f3-8eda-cf4951bfd7ba, xmp.iid:5810b76c-d454-421e-9554-96457bd5bbfa
History When                    : 2015:03:18 15:17:02-07:00, 2015:04:17 17:02:47-07:00
History Software Agent          : Adobe Illustrator CC 2014 (Macintosh), Adobe Illustrator CC 2014 (Macintosh)
History Changed                 : /, /
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 3.500000
Max Page Size H                 : 5.000000
Max Page Size Unit              : Inches
Font Name                       : Anago-Book, Anago-Medium, Anago-Bold, MyriadPro-Regular
Font Family                     : Anago, Anago, Anago, Myriad Pro
Font Face                       : Book, Medium, Bold, Regular
Font Type                       : Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 2.000, Version 2.000, Version 2.000, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329
Font Composite                  : False, False, False, False
Font File Name                  : .21713.otf, .22031.otf, .21711.otf, MyriadPro-Regular.otf
Plate Names                     : Magenta, Yellow, Black
Swatch Groups Group Name        : Brights
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000000
Swatch Groups Colorants Magenta : 90.000000
Swatch Groups Colorants Yellow  : 0.003100
Swatch Groups Colorants Black   : 0.003100
Producer                        : Adobe PDF library 11.00
Has XFA                         : No
Page Count                      : 16
Creator                         : Adobe Illustrator CC 2014 (Macintosh)

EXIF Metadata provided by EXIF.tools