Ruckus SmartCell Gateway™ 200 Command Line Interface Reference Guide For RuckOS 3.0 SCG Ruck OS 3 0 Cli Rg 20141203
SCG-200 Command Line Interface Reference Guide for RuckOS 3.0 scg-3-0-cli-rg--20141203
2014-12-03
User Manual: Ruckus SCG-200 Command Line Interface Reference Guide for RuckOS 3.0
Open the PDF directly: View PDF
Page Count: 382 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Contents
- About This Guide
- Introduction to the SCG Command Line Interface
- Configuration Commands
- Configuration Commands
- eap-aka
- eap-sim
- encrypt-mac-ip
- end
- event
- event db-persistence
- event email
- event snmp-trap
- event-email
- exit
- ftp-server
- ftp-test
- ggsn-service
- help
- hlr-mnc-ndc
- hlr-service
- hlr-system-wide
- hostname
- hotspot-profile
- interface
- ip default-gateway
- ip internal-subnet
- ip name-server
- ip route
- ip separate-access-core
- l2ogre-profile
- l3ogre-profile
- lbs-service
- license import
- lineman
- logging console
- lwapp2scg
- mgmt-acl
- mvno
- network-traffic-profile
- no 3rd-zone
- no acct-profile
- no admin
- no admin-radius
- no adv-forwarding-profile
- no ap
- no ap auto-tagging
- no ap-cert-check
- no ap-control-mgmt-tos
- no ap-root-ca
- no ap-sci
- no auth-profile
- no cgf-service
- no cls-sess msisdn
- no cls-sess
- no control-plane
- no data-plane
- no dhcp-service
- no domain
- no dp-group
- no eap-aka
- no eap-sim
- no encrypt-mac-ip
- no event
- no ftp-server
- no ggsn-service
- no hlr-mnc-ndc
- no hlr-service
- no hotspot-profile
- no interface
- no ip
- no l2ogre-profile
- no l3ogre-profile
- no lbs-service
- no lineman
- no logging
- no mvno
- no network-traffic-profile
- no pmipv6-profile
- no radius-service
- no report
- no rks-gre
- no role
- no snmp-trap
- no snmp-v2-community
- no snmp-v3-user
- no soft-gre
- no subpackages
- no ttg-pdg-profile
- no user-agent-blacklist
- no user-role
- no user-traffic-profile
- no zone
- northbound-authtype
- northbound-portal
- ntp-server
- pmipv6-profile
- q-in-q-ethertype
- radius-service
- report
- rks-gre
- role
- Configuration Commands
- Debug Commands
- Setup Commands
- Show Commands
- show 3rd zone
- show admin-activity
- show alarm
- show ap
- show ap-stats
- show backup
- show backup-config
- show backup-config-state
- show backup-network
- show backup-state
- show backup-upgrade-state
- show cgf-cnxn-stats
- show cgf-tx-stats
- show client
- show clock
- show cls-sess
- show cls-sess-range
- show cluster
- show cluster-state
- show control-plane
- show control-plane-stats
- show cpuinfo
- show data-plane
- show data-plane-stats
- show dhcp-relay-stats
- show dhcp-server-stats
- show diskinfo
- show event
- show ggsn-cnxn-stats
- show ggsn-gtpc-stats
- show history
- show hlr-stats
- show hlr-sctp-stats
- show interface
- show internal-subnet
- show ip
- show license
- show lma-connectivity-stats
- show lma-signaling-stats
- show meminfo
- show ntp
- show radius-proxy-stats
- show radius-server-stats
- show report-result
- show rogue-aps
- show running-config
- show service
- show ttg-client
- show upgrade-history
- show upgrade-state
- show version
- show zone
- System Commands
- ?
- backup
- backup config
- backup network
- backup-upgrade
- cluster in-service
- config
- copy
- copy backup
- copy backup-config
- copy backup-network
- copy client
- copy report-result
- delete backup
- delete backup-config
- delete backup-network
- delete client
- diagnostic
- enable
- enable <new-password>
- exit
- help
- logout
- no service
- ping
- reload
- reload ap
- reload data-plane
- reload now
- remote ap-cli
- restore config
- restore local
- restore network
- service restart
- service start
- set-factory
- setup
- shutdown
- shutdown now
- upgrade
- Index