RuiXingHengFang Network RHF2S024 Home LoRaWAN Gateway User Manual

RuiXingHengFang Network(Shenzhen) Co., Ltd. Home LoRaWAN Gateway

User manual

Download: RuiXingHengFang Network RHF2S024 Home LoRaWAN Gateway User Manual
Mirror Download [FCC.gov]RuiXingHengFang Network RHF2S024 Home LoRaWAN Gateway User Manual
Document ID4003282
Application IDQWc3j/JoWagebmdJTUwkGA==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize132.47kB (1655910 bits)
Date Submitted2018-09-12 00:00:00
Date Available2018-09-12 00:00:00
Creation Date2017-08-25 11:42:11
Document Lastmod2018-09-12 16:04:44
Document TitleUser manual
Document CreatorWPS Office
Document Author: windows

Specifications
RHF2S024
Home LoRaWAN Gateway
Specifications
V0.4
Document information
Info
Content
Keywords
RisingHF, LoRaWAN, IOT, Gateway, specifications
Abstract
This document describes the specifications of the Home
RHF2S024
Specifications
1.
Preface
This document describes the technical specifications and features of the home gateway RHF2S024.
RHF2S024 is an 8 channels Smart Home Gateway device designed by Friendcom, which is
compatible with LoRaWAN protocol and WiFi IEEE 802.11b/g/n.It can also be used as a WiFi router.
2.
RHF2S024 LoRaWAN Gateway description
RHF2S024 is an IOT gateway based on LoRaWAN and target to LPWAN network. The GW could
support LoRaWAN Class A/C protocol and WiFi IEEE 802.11.b/g/n standard. The 2.4G wireless
transmission rate up to 150Mbps. Users could connect the GW to Cloud server via WiFi.
This device integrate an high performance CPU MT7688, one pcs of base-band processor SX1301,
that it could support 8 multi-SF channel (SF12 to SF7), 1 single-SF channel and 1 GFSK channel.
Output power could achieve to 13dBm max. Sensitivity is as low as -142dBm@300bps. With specified
payload length and transmit period, one GW could support 10k nodes.
RHF2S024 is a smart, easy installation and high reliability device. Customers could setup a quick
LoRaWAN network for their LPWAN application with RHF2S024.
2.1. Functional Block
RHF2S024 functional block is shown below.
Figure 2- 1 RHF2S024 functional block
V0.4 2017-08-25
www.risinghf.com
Specifications
2.2. Product features and application
Features:
 LoRaWAN half-duplex operation mode;
 Include 8 multi-SF LoRa channel, 1 singleSF LoRa channel, and 1 GFSK channel;
 Output power achieve to 3dBm max,
receiver sensitivity as low as
-142dBm@300bps;
 Support LoRaWAN ClassA/C mode;





Industry 4.0,Industrial monitor
Wireless remote control and monitor
Smart Home, Smart building, Smart
community and Smart city;
Wireless alarm and security
environment monitor
 Support 802.11 b/g/n;
 Support 10base-T and 100base-TX;
 Support 100m Ethernet cable;
Application:



M2M,IOT and LPWAN
Wireless sensor network
AMR
2.3. Specifications
Item Group
Table 2- 1 RHF2S024 Specifications
Item
Description
Core
MIPS24KEc
Basic Frequency
580MHZ
RAM
1G-bit
Flash
256M-bit
10M/100Mbps Interface
Access internet via cable
2.412-2.462G WIFI
Wireless access
System
Configuration
Communication
LoRa 915MHz
V0.4 2017-08-25
www.risinghf.com
Specifications
WIFI
60M(Open Space)
LoRa
3km(city environment)
Power supply input
DC 12V
Average Power
Consumption
<5W
Wireless coverage
Electrical
Specification
2.4G WIFI Output
Power
2.4G WIFI Sensitivity
LED
V0.4 2017-08-25
www.risinghf.com
11n HT20: 15±2dBm 11n HT40: 16±2dBm
11g: 15±2dBm
11b: 13±2dBm
11n HT20 MCS7 150Mbps: -68dBm@10%PER
11g 54Mbps: -68dBm@10%PER
11b 11Mbps: -85dBm@8%PER
LoRa Output Power
2±1dBm
LoRa Sensitivity
-142dBm@SF12,BW=125kHz
POWER LED
Power access indication
SYSTEM LED
System status indication
WIFI LED
WIFI link status indication
LoRa LED
LoRa link status indication
USB LED
USB link status indication
Specifications
External Interface
Dimensions
Installation
RJ45 LED
RJ45 link status indication
RJ45
WAN/LAN Automatic switching between
different modes
USB2.0
Local firmware upgrade and data download
WIFI antenna
5dBi External antenna
LoRa antenna
0dBi External antenna
Power interface
12V/1.5A Power supply input
Dimensions
166*105*28.4mm
Weight
223.2g
Installation
On the desktop or Fixed on the wall
Operational
temperature range
-20 to +50℃
Storage
temperature range
-40 to +85℃
Operating Range
3.
Global electrical specifications and reliability
3.1. Electrical specifications
3.1.1. Power Supply
RHF2S024 is equipped with 12V / 1.5 A 5 energy efficiency power adapter, input voltage range of
100 ~ 240Vac; 50/60Hz, output voltage range 11.4 ~ 12.6 V.
V0.4 2017-08-25
www.risinghf.com
Specifications
3.1.2. Consumption
Table 3- 1 RHF2S024 Total Consumption
Item
Standby
Average
MAX
Value typ/W
2.4W
4.1W
5W
3.1.3. Rf Specifications(LoRaWAN)
Conducted Receiver sensitivity and Transmitter output power would be used to evaluate the
performance here.
1)Sensitivity
Test condition:32byte payload,PER=10%, +25℃.
Part Number
Table 3- 2 Conducted Receiver sensitivity
Bandwidth/kHz
125
RHF2S024
250
500
2)Output power
Test condition:CW signal,+25℃.
Spreading Factor
12
12
12
12
Table 3- 3 Output power
Part Number
Parameter
Min12
RHF2S024-868
250
902.5
Frequency Range(Tx)
902.5
RHF2S024
Frequency Range(Rx)
500
Max Output power
125
125
RHF2S024-915
250
500
V0.4 2017-08-25
www.risinghf.com
Sensitivity/dBm
-140
-125
-136
-122
-133
-119
12
12
12
Typ
-139
-125
Max -136 Unit
927.5 -122 MHz
-133
927.5
MHz
-119
dBm
-139
-125
-136
-122
-133
-119
Specifications
3.1.4. Antenna performance
The gateway is equipped with an high efficient omnidirectional antenna.
Resistance 50Ω
VSWR<3.0@470-510MHZ
VSWR<2.0@868-915MHZ
VSWR<1.8@2.4-2.5GHZ
Gain
0dBi@470-510MHZ
0dBi@868-915MHZ
5dBi@2.4-2.5GHZ
Efficiency 470-510MHZ:>35%
868-915MHZ>60%
2.4-2.5GHZ:>60%
V0.4 2017-08-25
www.risinghf.com
Specifications
3.2. Reliability
Environment test
Item
Low temperature
operation
High temperature
operation
Low temperature
Storage
High temperature
Storage
V0.4 2017-08-25
www.risinghf.com
Table 3- 7 Environment test requirement
Test condition
Temperature: –20ºC
Operation mode: working
with service connected
Test duration: 12 h
Temperature: +50ºC
Operation mode: working
with service connected
Test duration: 12 h
Temperature: –40ºC
Operation mode: no
power, no package
Test duration: 24 h
Temperature: +85ºC
Operation mode: no
power, no package
Test duration: 24 h
standard
JESD22-A1
GB/T 2423
JESD22-A1
GB/T 2423
JESD22-A1
GB/T 2423
JESD22-A1
GB/T 2423
results
Appearance ok;
LoRaWAN RF
Performance ok;
Function ok;
Appearance ok;
LoRaWAN RF
Performance ok;
Function ok;
Appearance ok;
LoRaWAN RF
Performance ok;
Function ok;
Appearance ok;
LoRaWAN RF
Performance ok;
Function ok;
Specifications
4.
Mechanical size and package information
4.1. Mechanical size
Figure 4-1 RHF2S024 Mechanical size
4.2. package information
4.2.1. Package list
Table 4- 1 package list
Material
PN
RHF2S024
RHF2S024-xxx
Adapter
12/1.5A
V0.4 2017-08-25
www.risinghf.com
Qty
Specifications
4.3. Order information
RHF2S024 include several part number, different part number would be used in different band and
area, please contact with sales@risinghf.com for detailed information.
Table 4- 2 order information
PN
descriptions
RHF2S024
902.5-927.5MHz
RHF2S024-868
RHF2S024-915
859-871MHz
900-930MHz
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any inte rference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interferenceto radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and
your body.
V0.4 2017-08-25
www.risinghf.com
11
Specifications
Modifications
V0.4 2017-08-25
+ Add Package information
V0.3 2017-08-07
+ Add EU868/IN865/US915/AU915/AS923 Specification parameters and ordering information
+ Update with some error modifications
V0.2 2017-08-04
+ Add Power consumption parameters
V0.1 2017-06-20
+ Create draft.
V0.4 2017-08-25
www.risinghf.com
12
Specifications
Please Read Carefully:
Information in this document is provided solely in connection with RisingHF products. RisingHF reserve the right to make changes, corrections,
modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All RisingHF products are sold pursuant to RisingHF’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the RisingHF products and services described herein, and RisingHF
assumes no liability whatsoever relating to the choice, selection or use of the RisingHF products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by RisingHF for the use of such third party
products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of
such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN RISINGHF’S TERMS AND CONDITIONS OF SALE RisingHF DISCLAIMS ANY EXPRESS OR
IMPLIEDWARRANTY WITH RESPECT TO THE USE AND/OR SALE OF RisingHF PRODUCTS INCLUDING WITHOUT LIMITATION
IMPLIEDWARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE
LAWSOF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
RISINGHF PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE
SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B)
AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR
ENVIRONMENTS. WHERE RISINGHF PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS
AT PURCHASER’S SOLE RISK, EVEN IF RISINGHF HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS
EXPRESSLY DESIGNATED BY RISINGHF AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY
DOMAINS ACCORDING TO RISINGHF PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED
ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.
Resale of RisingHF products with provisions different from the statements and/or technical features set forth in this document shall
immediately void any warranty granted by RisingHF for the RisingHF product or service described herein and shall not create or extend in any
manner whatsoever, any liability of RisingHF.
RisingHF and the RisingHF logo are trademarks or registered trademarks of RisingHF in various countries.
Information in this document supersedes and replaces all information previously supplied.
The RisingHF logo is a registered trademark of RisingHF. All other names are the property of their respective owners.
© 2015 RISINGHF - All rights reserved
http://www.risinghf.com
V0.4 2017-08-25
www.risinghf.com
13

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Author                          : windows
Comments                        : 
Company                         : 
Create Date                     : 2017:08:25 11:42:11+03:30
Modify Date                     : 2018:09:12 16:04:44+08:00
Source Modified                 : D:20170825114211+03'42'
Subject                         : 
Trapped                         : false
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Format                          : application/pdf
Creator                         : windows
Description                     : 
Title                           : 
Creator Tool                    : WPS Office
Metadata Date                   : 2018:09:12 16:04:44+08:00
Keywords                        : 
Producer                        : 
Document ID                     : uuid:2e2d1618-a9e4-4fd5-8cd8-f2f974ede392
Instance ID                     : uuid:e7f074b0-01c2-4ec1-b8aa-d2af4ba43eea
Page Count                      : 12
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AJUZ-RHF2S024

Navigation menu