RunCam Technology SPLIT Camera User Manual
RunCam Technology (Shenzhen) Co., Ltd. Camera Users Manual
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3464976 |
| Application ID | ABTdSZTFltoSjuF1UW0vNQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 28.32kB (354023 bits) |
| Date Submitted | 2017-07-14 00:00:00 |
| Date Available | 2017-07-16 00:00:00 |
| Creation Date | 2017-07-05 15:08:26 |
| Producing Software | Acrobat Distiller 9.3.2 (Windows) |
| Document Lastmod | 2017-07-12 11:26:26 |
| Document Title | Users Manual |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | 95 |
RunCam User Manual ·Instruction diagram Side A LED 1 LED 2 LED 3 LED 4 LED 5 Buzzer Microphone -BAT +BAT (4.2V) TX RX GND Audio +5V (1A) GND Video LED 1: Blue ——WiFi status light LED 2: Green ——Photo mode status light LED 3: Blue —— Video mode status light LED 4: Orange —— OSD Setup status light LED 5: Red —— Power Status Light: Blinking during operation (solid red while charging) Side B WiFi/Mode Switch Button Micro-USB Power/Shutter Button Sensor connector WiFi module connector Warning: When connecting to a computer via USB, please cut off the power of the drone firstly. USB or 3 pin power interface only supports DC 5V power supply. Battery solder joints only support 4.2V lithium-ion battery. ·5.8G Transmitter connection diagram Transmitter PDB 5V 12V +5V GND Video Power in GND Audio GND ·WiFi module connection diagram (WiFi module) Warning: WiFi module is removable. Please insert the WiFi module in the correct direction! Otherwise the module could be damaged. ·MicroSD Card Capacity up to 64GB; Please use high speed cards(Class10/UHS-I/UHS-II). OPEN LOCK ·Lens module connection diagram LOCK OPEN ·Basic Camera Operation Powering On/Off Long press the Power/Shutter button WiFi On/Off Short press the WiFi/Mode Switch button Mode Switching After powering on, long press the WiFi/Mode Switch button to cycle through the three modes: Video/Photos/OSD settings. Video Mode Camera Status Light: Blue (LED 3) • Press the Power/Shutter button to start/stop recording. Photo Mode Camera Status Light: Green (LED 2) • Press the Power/Shutter button to capture photos. OSD Setup Mode Camera Status Light: Orange (LED 4) • Press the Power/Shutter button to move to a setting. • Press the WiFi/Mode Switch button to select. • Long press the WiFi/Mode Switch button to exit the menu. Forced Shutdown Simultaneously press the Power/Shutter button and WiFi/Mode Switch button. Reset In standby mode, press the WiFi/Mode Switch button three times in rapid succession (within 2 seconds). When resetting is complete, the status light (orange) blicks twice, and the camera automatically shuts dows. The module is designed to comply with the FCC statements. FCC ID: XXXXXX the final device should contain the following text: "Contains FCC ID:XXXXXX” · App(Android | iOS) Search 'RunCam App' on Google Play/Apple Store, or download on our website: runcam.com/download/runcamSplit Default SSID: RCSplit_ ****** (* for letters or numbers) Default WiFi password: 1234567890 · Check Complete User Manual Please visit：runcam.com/download/runcamSplit www.runcam.com FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. RF warning statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : 95 Create Date : 2017:07:05 15:08:26+08:00 Modify Date : 2017:07:12 11:26:26+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2017:07:12 11:26:26+08:00 Producer : Acrobat Distiller 9.3.2 (Windows) Format : application/pdf Title : <52432053706C69745FD3A2B5C2D6D0B5E7D7D3CBB5C3F7CAE9285634293137303730352E6169> Creator : 95 Document ID : uuid:d1d7d078-52be-414f-9fc1-9aba9798980f Instance ID : uuid:07c9ecb5-fa03-4f50-a647-5a15eeeb85b5 Page Count : 2EXIF Metadata provided by EXIF.tools