S F EXPRESS GROUP HHT4GR Handheld Terminal User Manual HHT4GR

Download:
Mirror Download [FCC.gov]
Document ID	1560298
Application ID	U32eTbg+ZydLkxn6NHNhQA==
Document Description	Manual revised
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	25kB (312476 bits)
Date Submitted	2011-10-14 00:00:00
Date Available	2011-10-14 00:00:00
Creation Date	2011-09-26 17:33:49
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2011-09-26 17:33:49
Document Title	Microsoft Word - HHT4GR User manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

CATALOG
Ⅰ HHT-4GR Overview ........................................................... 2
Product Features .......................................................................................... 2
Structure and Elements .............................................................................. 3
Ⅱ Operation Guide ................................................................. 4
Power on and off.......................................................................................... 4
Sleep and Wakeup ....................................................................................... 4
Hard Reset ...................................................................................................... 4
Install and Remove Battery ..................................................................... 5
Install SIM card and TF card ................................................................... 5
Charge the Battery ...................................................................................... 6
Appendix .................................................................................. 7
Ⅰ HHT-4GR Overview
Product Features
Item
Feature
OS
Windows Embedded CE 6.0
CPU
Samsung S3C6410 ARM11 667MHz
Frequency Bands
WCDMA 2100MHz, do not support voice service
Memory
256MB DDR SDRAM; 256MB OneNAND Flash
Camera
2M pixels CMOS 1600×1200 resolution with Flashlight
LCD
3.2” Transflective TFT LCD, 320*240 pixels, 262144 colors
Audio Output
Built-in Loudspeaker 16Bit stereo output
Physical Interface
Mini USB 2.0
WIFI
802.11b/g
Scanner
Single line miniature laser scan engine
Expanded Memory
Support Micro SD
Size
W68*L149*T28mm
Battery
3.7V 3000mAH lithium-ion polymer battery
AC Charger
Input: 100~240V ~0.3A 50~60Hz 12-15VA
Output: 5V 1.0A Max
Operating Temp
-20°C to 50°C
Storage Temp
-25°C to 60°C
Humiditiy
95% non-condensing
Structure and Elements
NO.
Component ID
NO.
Component ID
NO.
Component ID
Power Key
Scanner Key
Headset Jack
USB Jack
LCD & Touchpanel
Navigation Key
ESC Key
Return Key
Function Keys
10
LED Indicator Light
11
Enter Key
12
Number Keys
13
Function keys
14
Scanner Key
15
Speaker
16
Scanner Window
17
RESET Key
18
Camera
19
Flashlight
20
Battery Pack Cover
Lock Switch
21
Battery Pack Cover
Ⅱ Operation Guide
Power on and off
Power on：
Short press the power key, the screen will turn light,
device is launched to work.
Power off：
Press and hold the power key for a while, the
will turn off, and the device is switched off.
and
the
screen
Sleep and Wakeup
Sleep：
When the system enters into sleeping mode, it means the system enters a low power consumption
mode, in which more power will be saved. There are two methods to enter into the sleeping mode. One
method is leaving the device to go to sleep automatically. When the system is idle and no other
operation occurs for a certain period, the system is going to sleep by itself automatically. The other
method is to make it sleep manually, which you can short press the power key when the system is
active, and then the screen will turn off, the system enters into sleeping mode.
Wakeup：
When the system is sleeping, you can short press power key to wake up it, the screen will turn on, and
you can operate the device normally.
Hard Reset
When the system is running on, poke the
on back of the device, the system will reset
reset key
quickly.
Install and Remove Battery
Showing as the figure,
battery cover locking key to the
then press the cover at the
side, lift the cover and remove
battery cover.
When
removing
the
press the up-line of the battery,
the battery from the slot.
When
replacing
the
insert the battery bottom to the
bottom, then press the battery
slot.
When
replacing
the
cover, make sure the cover
and the slot bottom matched
cover on the slot, and then
locking key to the left and lock
cover.
Slide the
right,
top-right
the
battery,
then lift
battery,
slot
to
the
battery
bottom
well,
slide the
the
Install SIM card and TF card
As the slot of SIM card, PSAM card and T-Flash card are placed in
the battery slot, the battery must be removed if they are replaced or
removed.
When replacing the SIM card, as the direction showing in the figure,
insert the card to the slot, making sure the SIM card is matched well with
the slot. Replacing the PSAM card is same as the SIM card
When replacing the T-Flash card, slide down the locking catch of the
slot first, and then lift the locking catch, replacing the T-Flash in the slot,
then cover the locking catch, and finally slide up the locking catch to lock
the T-Flash card.
Charge the Battery
You need to charge the battery before the device is used. Generally, the new battery will have longer life
after several times of battery fully recharging and discharging. Thus, you need to charge the battery 12
hours at the first three charging, and wait for the battery completely discharged before the next the
recharging.
Two Ways of Charging：
1 Using the travel charger for HHT4GR
 Charging when switching off
when HHT4GR is switching off,
connect the charger to the
device, and then connect the
charger to the 220v outlet. The
indicator appears red light while
charging and then turn off while
fully charged.
 Charging when switching on
when HHT4GR is switching on,
connect the charger to the
device, and then connect the
charger to the 220v outlet. The
indicator appears red light and
the power indication on the
screen shows the charging logo while charging and the red light turn off while fully
charged.
The travel charger can fully recharge the completely-discharged battery within 6 hours,
and can recharge faster while switching off.
2 Using seat charger for
recharging the battery. Remove
battery from the HHT4GR, and
the battery to the seat charger,
then connect the charger to the
The indicator appears red light
charging. When fully charged, the
indicator appears green light.
the
insert
and
outlet.
while
The seat charger can fully
recharge
the
completely-discharged
battery
within 4
hours, and because the electric
capacity of the seat charger is larger, please choose the seat charger for recharging as possible,
not only for the fast charging but also for the battery life length.
Appendix
General Precautions
•
Damage requiring service
Unplug the product from the electrical outlet and refer servicing to an authorized service
technician or provider under the following conditions:
•
•
Liquid has been spilled or an object has fallen into the product.
•
The product has been exposed to rain or water.
•
The product has been dropped or damaged.
•
There are noticeable signs of overheating.
•
The product does not operate normally when you follow the operating instructions.
Avoid hot areas
The product should be placed away from heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that produce heat.
•
Avoid wet areas
Never use the product in a wet location.
•
Avoid pushing objects into product
Never push objects of any kind into cabinet slots or other openings in the product. Slots and
openings are provided for ventilation. These openings must not be blocked or covered.
•
Mounting Accessories
Do not use the product on an unstable table, cart, stand, tripod, or bracket. Any mounting of
the product should follow the manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.
•
Avoid unstable mounting
Do not place the product with an unstable base.
•
Use product with approved equipment
This product should be used only with personal computers and options identified as suitable
for use with your equipment.
•
Cleaning
Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning, but NEVER use water to clean the LCD screen.
•
USB port
Due to the used enclosure material, the GSM mobile phone shall only be connected to a
USB interface of version 2.0 or higher. The connection to so called power USB is prohibited.
•
Charging
When charging, please place the phone in an environment that has a normal room
temperature and good ventilation. It is recommended to charge the phone in an
environment with a temperature that ranges from 5℃~25℃. Please ensure to use only the
charger offered by the manufacturer. Using unauthorized charger may cause danger and
violate the authorization of the phone and the guarantee article.
Safety Precautions for Power Supply Unit
•
Use the correct external power source
A product should be operated only from the type of power source indicated on the electrical
ratings label. If you are not sure of the type of power source required, consult your authorized
service provider or local power company. For a product that operates from battery power or
other sources, refer to the operating instructions that are included with the product.
•
Handle battery packs carefully
This product contains a Li-ion Polymer battery. There is a risk of fire and burns if the battery
pack is handled improperly. Do not attempt to open or service the battery pack. Do not
disassemble, crush, puncture, short external contacts or circuits, dispose of in fire or water, or
expose a battery pack to temperatures higher than 60˚C (140˚F).
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
•
Excessive sound pressure may harm your hearing
•
This charger is for indoor use only.
SAR Information
●
The SAR limit of USA is 1.6 W/kg. Device types HHT4GR has also been tested against this SAR
limit. The highest SAR value reported under this standard during product certification for properly
worn on the body is 0.436W/kg. This device was tested for typical body‐worn operations with the
back of the handset kept 1.5cm from the body. To maintain compliance with RF exposure
requirements, use accessories that maintain a 1.5cm separation distance between the user's body
and the back of the handset. The use of belt clips, holsters and similar accessories should not
contain metallic components in its assembly. The use of accessories that do not satisfy these
requirements may not comply with RF exposure requirements, and should be avoided.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
R&TTE DECLARATION
Hereby, S.F. EXPRESS GROUP CO., LTD declares that this device is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
For the declaration of conformity, visit the Web site www.sf-express.com /certification.
Notice: Observe the national local regulations in the location where the device is to be used.
This device may be restricted for use in some or all member states of the European Union (EU)
Warning!
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. TO REDUCE
RISK OF FIRE OR BURNS, DO NOT DISASSEMBLE, CRUSH, PUNCTURE, SHORT
EXTERNAL CONTACTS, EXPOSE TO TEMPERATURE ABOVE 60˚C (140˚F), OR
DISPOSE OF IN FIRE OR WATER. REPLACE ONLY WITH SPECIFIED BATTERIES.
RECYCLE OR DISPOSE OF USED BATTERIES ACCORDING TO THE LOCAL
REGULATIONS OR REFERENCE GUIDE SUPPLIED WITH YOUR PRODUCT.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Administrator
Create Date                     : 2011:09:26 17:33:49+08:00
Modify Date                     : 2011:09:26 17:33:49+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - HHT4GR User manual
Creator                         : Administrator
Document ID                     : uuid:e53f9a8a-1ef0-4171-9c10-2ef7087e73ee
Instance ID                     : uuid:c9523b49-1b5e-4926-aee4-a71547688841
Page Count                      : 10

EXIF Metadata provided by EXIF.tools