SB C and S TW-7000-R GLIDiC Sound Air TW-7000 User Manual GLIDiCTW 7000 UsersGuide En 0218

Download:
Mirror Download [FCC.gov]
Document ID	4206995
Application ID	pRZ0DOWyhuiUX/PS9oV8Sw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.44kB (193051 bits)
Date Submitted	2019-03-19 00:00:00
Date Available	2019-03-19 00:00:00
Creation Date	2019-03-13 14:55:17
Producing Software	Adobe PDF library 15.00
Document Lastmod	2019-03-19 14:34:22
Document Title	GLIDiCTW-7000_UsersGuide_En_0218
Document Creator	Adobe Illustrator CC 2015.3 (Macintosh)

GLIDiCTM Sound Air TW-7000
Use rʼs Guide
In s tr u c tion s
T r oub le s h o o t i n g
Pair in g M ultip le De v ic e s
C an n ot Pai r a D evi c e
You can pair up to eight devices to the earbuds.
Check ① to ⑤ below in order.
Note) The earbuds have to be connected to a device to
answer phone calls on the earbuds or listen to music.
●Pairing to connect to other devices
① Long press the multifunction button on the
right earbud for more than 5 sec. while the
earbud is on standby or in playback.
①Does the LED indicator on the right earbud
blink red and white when pairing?
The sound indicating the start of pairing
mode is heard from the earbuds.
Note）The device that was connected will be disconnected.
This "User's Guide" describes LED indications,
methods to reconnect, disconnect, or pair
multiple devices, and common solutions for
troubleshooting. Refer to the "Quick Start
Guide" for detailed device operations and
charging, and the “Safety Instructions and
Warranty” for safety instructions.
●The description on this guide
・The screenshots and steps used in this "User's
Guide" are for general smartphones. See the
instruction manual for your device for specific
instructions.
・The operation depends on your device or OS.
Bluetooth
③Follow the steps below to switch the connected
device.
③-1. Follow the steps in "Reconnecting/Disconnecting a Device"
in this guide on the device you want to disconnect.
③-2. Follow the steps in "Reconnecting/Disconnecting a
Device" in this guide on the device you want to connect.
Reconnecting/Disconnecting a Device
●Reconnecting a Device
Once a device is paired, it is reconnected
automatically when the right earbud is removed
from the charging case. Go through the
connecting procedure on your mobile device if
it does not reconnect automatically.
Example: Select Settings then Bluetooth.
Select GLIDiC TW-7000 from the list displayed.
C o mp a ti bl e De v ic es
Smartphones, tablets and other devices supporting Bluetooth® with music playing function
or calling function.
S p e c i ficati o ns
Bluetooth
●Disconnecting a Device
Go through the disconnecting procedure on
your mobile device.
Example: Select Settings then Bluetooth.
Set Bluetooth to Off.
< Settings
Bluetooth
Off
The battery is flat. Charge the
battery.
→See "Charging the Case/Earbuds"
in the "Quick Start Guide".
Blinking red
and white
and then off
The earbud exits pairing mode and
turns off after three minutes.
Switch them back to pairing mode.
→See step ① in "Pairing Multiple
Devices" in this guide.
Note) The earbuds switch to pairing
mode a few seconds after they are
removed from the charging case
for the first time or after reset.
②Is Bluetooth on?
Check that Bluetooth is turned on in the Bluetooth
settings screen on your mobile device.
Bluetooth
③Is "GLIDiC TW-7000" displayed?
Check that it is displayed in the Bluetooth
settings screen on your mobile device.
< Settings
Bluetooth
Bluetooth
Now discoverable as “XXXX” .
Bluetooth
OTHER DEVICES
GLIDiC TW-7000
L ED In d ic ator s
●Right earbud
System status
LED indicator
Charging
Red
On
Power on
White
Blink once slowly
Timeout*
White
Blink once slowly
In pairing mode
Red White
Red
White ・
・
・
Blinking
Standby w/o connection White White White White ・・・ Blinking
Note) Depends on the environment.
Note) The earbuds switch to pairing
mode a few seconds after they are
removed from the charging case
for the first time or after reset.
Standby with connection White
In a call/playback
5 sec.
White
Blink three times
・
・
White 5 sec. ・
4 sec.
White ・
・
・
Blink every 5 sec.
Blink every 4 sec. slowly
Calling in
White White 2 sec. White White ・
・
・
Blink every 2 sec.
Reset complete
White Red White Red White Red
Blink six times
●Left earbud
System status
LED indicator
Charging
Red
On
Power on
White
Blink once slowly
Timeout*
White
Blink once slowly
Standby with connection White
In a call/playback
5 sec.
White
White 5 sec.
・
・
・ Blink every 5 sec.
White
・
・
・ Blink every 4 sec.
4 sec.
Calling in
White White 2 sec. White White ・
・
・ Blink every 2 sec.
Reset complete
White Red White Red White Red
Blink six times
*: The earbuds time out and turn off either three minutes
after entering pairing mode or about three to six minutes
after disconnecting from your mobile device.
●Charging case
The LED indicator(s) of the charging case lights or
blinks either when the case is opened or while
charging, depending on its battery level.
Level
Low
Medium
High
GLIDiC TW-7000
Connected
If it is not connected, connect the device.
→See "Reconnecting a Device Manually" in this
guide.
If "GLIDiC TW-7000" is not displayed on the
Bluetooth settings screen, pair the device.
・ Pairing the first device
→ See "Pairing to Connect a Device" in the
"Quick Start Guide".
・ Pairing the second and later devices
→ See "Pairing Multiple Devices" in this
guide.
●Is the volume on your mobile device loud
enough?
Check the volume setting on your mobile
device.
●Does the problem only occur with the left
earbud?
The right earbud is in monaural mode.
To switch to stereo mode, place both earbuds
in the charging case and remove them again.
If no sound is heard even after doing so,
delete pairing information and redo the
pairing operation.
→See "Deleting Pairing Information (Reset)" and
"Pairing to Connect a Device" in the "Quick
Start Guide".
Not Connected
●Charging case
Internal battery: Lithium polymer battery 3.7V
460mAh
Interface: microUSB (Type-B) port
External dimensions: approx. 80(W) 28(D)
36(H)mm
Music playback/phone call: approx. 9 hours
With charging case
Music playback/phone call: approx. 25 hours
Charging time: approx. 1 hour for earbuds,
approx. 2 hours for case
The earbud is not in pairing mode.
Switch to pairing mode.
→See step ① in "Pairing Multiple
Devices" in this guide.
Bluetooth
MY DEVICES
GLIDiC TW-7000
Pairing complete White White White
B a t t e r y Li fe
On/blinking
white
Now discoverable as “XXXX” .
*: Depends on the environment.
●Charging cable
Interface: microUSB (Type-B) connector,
USB (Type-A) connector
Cable length: approx. 30cm
If it does not, try one of the following depending
on the status of the LED indicator.
< Settings
Bluetooth
Can withstand: 5 to 35 C (41 to 95 F)
●Earbuds
Internal battery: Lithium polymer battery
3.7V 85mAh
Bluetooth® Specification: Version 5.0
Connection range: approx. 10m (32ft.)
(Output: Class 2)*
Supported profile: A2DP, AVRCP, HFP, HSP
Supported codec: SBC, AAC
Supported content protection: SCMS-T
Maximum number of paired devices: 8
External dimensions: approx. 23(W) 19(D)
24(H)mm
Now discoverable as “XXXX” .
②Go through the pairing procedure on your
mobile device.
You can pair/connect other devices in the same
way as the first device. Follow step ② in "Pairing
to Connect a Device" in the "Quick Start Guide".
< Settings
Bluetooth
MY DEVICES
The LED indicator blinks red and white.
Notes
● Is it connected?
Check that your mobile device is connected
to "GLIDiC TW-7000" in the Bluetooth settings
screen on your mobile device.
< Settings
Red White Red White ・・・
Multifunction
button
Engl i sh
N o S o u n d i s H ea r d
LED indicator
One LED indicator lights/blinks
Two LED indicators light/blink
Three LED indicators light/blink
If it is not displayed, try the following.
・Bring the earbuds closer to your mobile device.
・Operate in an environment where radio
waves from other devices such as a Wi-Fi
device, microwave oven, or other Bluetooth
device are not present.
・Check whether the Bluetooth device can be
discovered/discoverable in the Bluetooth
settings screen on your mobile device.
④Can you select and pair the "GLIDiC TW-7000"?
If it cannot be paired when selected, place
the earbuds in the charging case, turn off
Bluetooth on your mobile device, and redo
the pairing operation.
⑤Does it fail to pair even after trying all of the
above?
Delete all pairing information from the earbuds
and redo the pairing operation.
→See "Deleting Pairing Information (Reset)" in
the "Quick Start Guide".
Ea r b u ds do N o t Ch a r ge
●Is the charging case charged?
If not, charge the charging case.
→See "Charging the Case/Earbuds" in the "Quick
Start Guide".
●Are the earbuds properly placed in the case?
The LED indicator on the earbuds turns red if
they are placed properly. If they are not, place
them again.
GLIDiCTM Sound Air TW-7000s
SB-WS72-MRTW
Safety Instructions and Warranty
Eng lis h
Read this “Safety Instructions and Warranty” and the “Quick Start Guide”
before using this product. Make sure you read and follow all “Safety
Instructions” . Keep them for future reference.
Precautions
Safety Instructions
Make sure you follow the safety instructions described here to avoid harm or
injury to the user of this device or others.
●Meaning of indicators
The following indicators show the degree of harm or injury caused by not
following the instructions and deviating from the intended use of this device.
DANGER
Indicates instructions, which, if not followed, may result in
death or severe injury*1 immediately.
WARNING
Indicates instructions, which, if not followed, may result
in death or severe injury*1.
CAUTION
Indicates instructions, which, if not followed, may result
in minor injury*2.
NOTICE
Indicates instructions, which, if not followed, may cause
physical damage*3.
*1: A severe injury refers to injuries that will leave permanent damage such as blindness,
injury, burns (high and low), electric shock, fracture, poisoning, as well as injuries which
require hospitalization/long term hospital visits.
*2: A minor injury refers to injuries such as burns (high and low), electric shock, injuries that
do not require hospitalization/long term hospital visits.
*3: Physical damage refers to external damage caused to houses/household belongings and
domestic animals/pets.
DANGER
・Stop using this device immediately when an abnormality such as odor,
abnormal sound, smoke, heat, deformation, breakage, expose of core
wire, disconnection is seen either during use or storage. Failing to do so
may result in fire, burns, explosion, injuries, or electric shock.
・Use the included charging cable and charge this device as instructed.
Failing to do so may cause battery leakage, explosion, heat, or fire.
・Stop charging this device if charging does not stop after a long time.
Failing to do so may result in fire, burns, and injuries.
・Do not place this device close to heating utensils such as microwave ovens
or induction cookers, or inside a pressurized container. It may cause electric
shock, fire, explosion, burns, or injuries.
・Only use with agency approved power supplies that meet local
regulatory requirements. Failing to do so may cause electric shock, fire,
explosion, burns, or injuries.
・Do not place or use this device under the following conditions. It may
cause electric shock, fire, explosion, burns, or injuries.
- Places where the temperature gets hot such as near fires or heaters;
places in direct sunlight or inside a car.
- Places with high humidity or condensation such as bathrooms, kitchens,
or near humidifiers.
- Dusty places.
- Covered with a cloth or blanket.
- Places where flammable gas may be generated such as gas stations.
・Do not allow conductive objects (necklaces, hairpins, pencil leads, metal
straps) to come in contact with this device's connectors or ports and do not
carry or place this device with them. Make sure no dust gets inside. It may
cause heat, fire, and explosion.
・Do not stab sharp objects (such as nails) into this device or subject it to
excessive shocks with hard objects (such as hammers) or stamping. It
may cause fire, explosion, heat, and battery leakage.
・Do not apply heat to this device or throw it in a fire. It may cause fire,
explosion, heat, and battery leakage.
・If you are using a cardiac pacemaker, do not put the charging case close to it
such as inside your breast pocket. Radio waves from the charging case may
affect the operation of the cardiac pacemaker.
・Do not damage, break, modify, over-bend, pull, twist, or tie the charging
cable. Do not put them under heavy objects. Use of a damaged charging
cable may result in fire caused by a shortage.
・Do not disassemble, modify, or repair. It may cause electric shock, fire,
explosion, burns, or injuries caused by a shortage.
・This device is not designed for use while exercising as moisture from
sweat may cause damage to the device and/or the user.
WARNING
・Stop using this device immediately when there is a leakage from the
built-in battery or odor. Failing to do so may start a fire from the leak or
cause an explosion.
・Use this device in an environment in which the ambient temperature
range is 5 to 35℃ (41 to 95℉).
・Check and remove any foreign matter inside connectors and ports on this
device and its charging cable. It may cause heat, fire, or failure.
・Keep this device out of the reach of children. Swallowing or licking this
device or the earbuds may affect their health. Seek medical advice immediately if this happens.
・Keep this device away from pets so that they cannot bite or step on it. It
may result in fire, explosion, burns, or injuries caused by battery leakage.
・Remove the charging cable when not in use. It may cause heat, fire,
explosion, electric shock, burns, or injuries.
・When inserting the charging cable, check the orientation and insert it
slowly. When disconnecting, hold the connector and pull it straight out.
Failing to do so may cause heat and burns by damage.
・Be careful of sharp edges and objects if this device breaks. If anything
leaks from inside the device, do not let it come in contact with your face,
hands, skin, or clothes. If liquid from the battery comes in contact with
your eyes, it may cause blindness. If it comes in contact with your skin, it
may cause dermatitis. If contact has been made, wash the affected area
with a lot of water and seek medical advice.
・Stop using this device immediately if you feel any abnormalities such as a
skin rash or itch. Seek medical advice if the symptoms continue.
・Do not wet this device with water or liquid such as drinking water, sea
water, pet urine, cosmetics, or other chemicals. Do not handle this device
with wet hands. Do not place this device near vessels filled with liquid
such as a vase, flower pot, glass, or cosmetics. It may cause fire, burns,
injuries, or electric shock. Stop using this device if it gets wet.
・Do not cover this device with a cloth or blanket while in use or charging.
It may cause fire, explosion, or burns.
・Do not hold this device for a long time (e.g. while a sleep) or put it in
pockets while charging.
・Do not operate mobile devices, make a phone call, or watch the display
while driving. It may cause an accident. Regarding operations of this
device while driving, make sure to follow all local applicable laws.
CAUTION
・Turn down the volume of your mobile device before use. Sudden loud
noise may affect your hearing or cause an accident.
・Stop using this device immediately if you feel discomfort during or after
using the device. Seek medical advice if the symptoms continue.
・Do not use this device in places where it would be dangerous if you are
unable to hear ambient sound, such as at railroad crossings, train station
platforms, roads, and construction sites. It may cause an accident.
・Do not let children use this device without proper supervision. Misuse of
this device may cause an accident or injury.
・Do not turn the volume up too loud or continue usage for an extended
amount of time. Continued hearing of loud noises may affect your
hearing.
NOTICE
・Do not place or charge this device in an unstable or slanted environment.
The device might fall and break.
・Do not sit with this device inside your back pocket. It may cause the
device to deform or break.
・Do not drop this device into a sink or other container filled with water. Do
not expose the device to water. It is not waterproof and may damage the
device.
・Do not place this device near objects which may be affected by
magnetism such as a cash card, credit card, or watch.
About Radio Waves
・Bluetooth wireless technology operates within a range of about 10m
(32ft.). This range may vary depending on obstacles or the
electromagnetic environment.
・Do not use this device in a location where magnetic, static charge or
electromagnetic interference may occur.
・Because Bluetooth devices and Wi-Fi use the same frequency (2.4GHz),
radiowave interference may occur resulting in noise or audio dropout or
communications being disabled if this device is used near a Wi-Fi device.
In this case, use this unit further away from a Wi-Fi device, or stop use of
this device.
・Communications may be slowed down or disabled if this device is used
near the following devices.
- Microwave ovens
- Digital cordless phones
- Wireless audio devices and other devices that use 2.4GHz frequency
such as gaming devices
- Metal objects that reflect radio waves
・This device may be affected by surrounding strong microwave, such as
broadcasting station.
WARNING
・Do not use this device near devices that may be severely affected by a
malfunction of this device. Radio waves from this device may affect the
operation of other devices.
・If you are using a cardiac pacemaker, do not put this device close to it
such as inside your breast pocket. Radio waves from this device may
affect the operation of the cardiac pacemaker.
・Do not use this device in a location with electronic medical devices. Radio
waves from this device may affect the operation of electronic medical
devices and cardiac pacemakers. Do not use this device in a crowded
location such as packed trains and hospitals.
・Do not use this device in a location where use of radio waves is prohibited
such as inside an airplane. Radio waves from this device may affect the
operation of instruments and cause an accident due to malfunction.
・Do not use this device near automatic doors, fire detectors, and other
automated instruments such as precision instruments and robots. Radio
waves from this device may affect the operation of the automatically
controlled equipment and cause an accident due to malfunction.
Support
LIMITED WARRANTY
U.S. and Canada only - 1 year
SB C&S Corp. (''SB'') solely for purchases made in the United States and Canada
warrants this product against defects in material or workmanship for the original
end-use purchaser or the person receiving the product from such a purchaser as a
gift (''You" or ''Your'') for the time period set forth above from the original date of
purchase of the product. SB does not warrant this product for any other person or
transferee. For this Limited Warranty to apply, the purchase must have been made
directly from SB or a dealer authorized by SB. Pursuant to this Limited Warranty, SB
will, at its sole option replace the product with a new or recertified/refurbished
product or part of the same (or similar) model. For purposes of this Limited Warranty,
"recertified" or "refurbished" means a product or part that has been returned to its
original specifications. In the event of a defect, these are Your exclusive remedies.
SB does not warrant that the operation of the product will be uninterrupted or
error-free. SB will not replace any consumable (such as fuses or batteries).
This Limited Warranty covers only the hardware components packaged with the
product. It does not cover separate accessories and technical assistance for
hardware usage. If you purchased an extended service plan, please refer to the
service plan for the coverage, duration and terms of service. Extended service plans
are not governed by this Limited Warranty.
This Limited Warranty does not cover defects or damage resulting from improper
or unreasonable use or maintenance; failure to follow operating instructions;
accident; excess moisture; insects; lightning; power surges; connections to
improper voltage supply; unauthorized alteration or modification of original
condition; damages caused by inadequate packing or shipping procedures; loss of,
damage to or corruption of stored data; malfunctions due to PC/peripherals/accessories; or repair of products damaged by any of the foregoing.
This Limited Warranty does not cover products modified or adapted to enable it
to operate in any country other than the country for which it was designed,
manufactured, approved and/or authorized, and products purchased from
unauthorized dealers.
To obtain warranty service, You must have a dated purchase receipt. SB will not
pay Your costs of shipping, insurance or transporting the product to SB, or any
import fees, duties and taxes. SB cannot guarantee that it will be able to repair any
product under this warranty or make a product exchange without risk to or loss of
software or data. Visit the following website for contact details to obtain specific
instructions on how to obtain warranty service for Your product:
https://glidic.jp/us/support/
This Limited Warranty does not cover any product sold “AS IS” or “WITH ALL
FAULTS” , expressly or impliedly. SB will not replace missing components from any
package purchased “Open Box” or “AS IS” .
This Limited Warranty is valid only in the United States and Canada.
LIMITATION ON DAMAGES: EXCEPT AS EXPRESSLY SET FORTH IN THE
PRECEDING SENTENCES, SB HAS NOT MADE, DOES NOT MAKE, AND WILL NOT
MAKE ANY REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED, WITH
RESPECT TO THE MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE,
SAFETY, DESIGN, CONDITION, QUALITY, CAPACITY, ENVIRONMENTAL
COMPLIANCE, OPERATION, PERFORMANCE, DURABILITY, OR SUITABILITY FOR
YOUR PURPOSES OF THE PRODUCT IN ANY RESPECT. TO THE EXTENT PERMITTED
BY LAW, SB SHALL NOT BE LIABLE FOR ANY INCIDENTAL, SPECIAL, PUNITIVE,
EXEMPLARY OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY WARRANTY
OR CONDITION, WHETHER WRITTEN OR ORAL, EXPRESSED OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE OR NON-INFRINGEMENT, ON THIS PRODUCT. NOR SHALL
RECOVERY OF ANY KIND AGAINST SB BE GREATER THAN THE ORIGINAL
PURCHASE PRICE OF THE PRODUCT FROM SB OR AN AUTHORIZED SB DEALER.
TO THE EXTENT PERMITTED BY LAW, ANY IMPLIED WARRANTY SHALL BE LIMITED
IN DURATION TO THE DURATION OF THIS LIMITED WARRANTY.
Some jurisdictions do not allow the exclusion or limitation of incidental, punitive,
special, exemplary or consequential damages. So, the above limitations or
exclusions may not apply to You. This limited warranty gives You specific legal
rights and you may have other rights which vary from state to state or jurisdiction
to jurisdiction.
ARBITRATION: YOU AGREE THAT DISPUTES BETWEEN YOU AND SB WILL BE
RESOLVED BY BINDING, INDIVIDUAL ARBITRATION, AND YOU ARE WAIVING
YOUR RIGHT TO A TRIAL BY JURY OR TO PARTICIPATE AS A PLAINTIFF OR CLASS
MEMBER IN ANY PURPORTED CLASS ACTION OR REPRESENTATIVE PROCEEDING.
THIS NOTICE ABOVE DOES NOT APPLY IF: (1) IF YOU ARE A RESIDENT OF ANY
JURISDICTION WHICH DOES NOT ALLOW THIS ARBITRATION AGREEMENT, (2) IF
YOU OPT OUT OF ARBITRATION AS DESCRIBED IN THE " OPT-OUT
INSTRUCTIONS" SECTION BELOW, OR (3) EXCEPT FOR CERTAIN TYPES OF
DISPUTES DESCRIBED IN THE PRAGRAPH BELOW.
What Happens If We Have A Dispute: If You live in the US or another jurisdiction
which allows you to agree to arbitration, You and SB agree that any disputes
shall be resolved exclusively through binding arbitration, except that each
party retains the right: (a) to bring an individual action in small claims court and
(b) to seek injunctive or other equitable relief in a court of competent
jurisdiction to prevent the actual or threatened infringement, misappropriation,
or violation of a partyʼ s copyrights, trademarks, trade secrets, patents, or other
intellectual property rights. Notwithstanding this arbitration agreement, SB
reserves the right to bring an action in any court of competent jurisdiction
against You to stop and/or seek compensation for the intentional or willful
misuse or abuse of its IP, products, and services. Without limiting the preceding
paragraph, You have the right to litigate any Dispute on an individual basis in
small claims court or other similar court of limited jurisdiction if You provide SB
with written notice according to the “Opt-Out Instructions” Section, to the
extent the amount at issue does not exceed $15,000, and as long as such court
has proper jurisdiction and all other requirements (including the amount in
controversy) are satisfied. If You donʼ t provide SB with an Arbitration Opt-out
notice within the period described in the “Opt-Out Instructions” Section, You will
be deemed to have knowingly and intentionally waived Your right to litigate
any dispute except as expressly set forth in clauses (a) and (b) above.
Arbitration Instructions: To begin Arbitration, either You or SB must make a written
demand to the other for arbitration. The Arbitration will take place before a single
arbitrator. The arbitration will be administered by the American Arbitration
Association ("AAA") in accordance with the Commercial Arbitration Rules and the
Supplementary Procedures for Consumer Related Disputes ("Rules") then in effect
(the Rules are available at www.adr.org or by calling the AAA at 1-800-778-7879).
The filing fees to begin and carry out arbitration will be shared between You and
SB, but in no event shall Your fees ever exceed the amount allowable by the special
rules for Consumers Disputes provided for by AAA, at which point SB will cover all
additional administrative fees and expenses. This does not prohibit the Arbitrator
from giving the winning party their fees and expenses of the arbitration when
appropriate pursuant to the Rules. Unless You and SB agree differently, the
arbitration will take place in the county and state where You live, and applicable
federal or state law shall govern the substance of any Dispute during the
arbitration. The Federal Arbitration Act will govern the interpretation and
enforcement of this Section. The arbitrator's decision will be binding and final,
except for a limited right of appeal under the Federal Arbitration Act.
Opt-Out Instructions: IF YOU DO NOT WISH TO BE BOUND BY THE BINDING
ARBITRATION PROCEDURE, THEN: (1) You must notify SB in writing within 30
days of the date that You purchased the product; (2) Your written notification
must be mailed to SB C&S Corp., 1-9-2 HIGASHI-SHIMBASHI, MINATO-KU,
TOKYO, 105-0021, JAPAN, Attn: Customer Support AND (3) Your written
notification must include (a) Your NAME, (b) Your ADDRESS, (c) the DATE You
purchased the product, and (d) a clear statement that "YOU DO NOT WISH TO
RESOLVE DISPUTES WITH ANY SB ENTITY THROUGH ARBITRATION AND/OR BE
BOUND BY THE CLASS ACTION WAIVER."
Opting out of this dispute resolution procedure will not affect the coverage of
the Limited Warranty in any way, and You will continue to enjoy the benefits of
the Limited Warranty.
Governing Law: For purchases made in the U.S, this Limited Warranty governed
by the laws of the State of California, excluding its conflicts-of-law rules. For
purchases made in a country other than the U.S, this Limited Warranty governed
by the laws of Japan, excluding its conflicts-of-law rules. If You are resident in a
country in which this clause is prohibited by local law, this section does not
apply to You, and does not deprive You of the protection of the mandatory
provisions of the consumer protection laws in Your country.
For Long Use of the Device
・The battery life of the lithium ion battery used in this device shortens due
to usage and the passage of time.
・Please purchase a new product if the length of time you can use this
device drops to less than half even when fully charged.
・Though the life of this product may vary depending on usage and
environment, follow the storage instructions to prevent the device from
deteriorating quickly if it is not used for a long time.
- Do not keep this device in a fully charged or no charge state for a long
time.
- Confirm that the LED indicator(s) on the earphones turns on every three
months.
・Charge the device for several tens of minutes if it does not.
●FCC ID: 2AO2PTW-7000-R / 2AO2PTW-7000-L
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operations.
FCC Caution: Any changes or modifications not expressly approved by
the party responsible for compliance could void the userʼs authority to
operate this equipment.
●Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following
measures:
・Reorient or relocate the receiving antenna.
・Increase the distance between the equipment and the receiver.
・Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
・Consult the dealer or an experienced radio/TV technician for help.
●FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines. This equipment has very low levels of RF energy that is deemed to
comply without testing of specific absorption rate (SAR).
CAN ICES-3(B)/NMB-3(B)
ISEDC CAUTION:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
ISEDC RF Exposure Statement:
The device compliance with RF exposure guidelines, users can obtain Canadian
information on RF exposure and compliance.
This Class B digital apparatus complies with Canadian ICES-003.
Après examen de ce matériel aux conformité aux limitesdʼintensité de champ RF, les
utilisateurs peuvent sur lʼexposition aux radiofréquences et la conformité and
compliance dʼacquérir les informations correspondantes
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
About this Document and Device
・This device is for use only in the United States. We bear no responsibility for any
damages or losses arising from use of, or inability to use, this product outside the
United States and provide no technical support or after-service for this product
outside the United States.・We bear no responsibility for any affects caused by
the use of, or inability to use, this product.・Design and specifications of this
device and document are subject to change without notice.・The Bluetooth®
word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc.
and any use of such marks by SB C&S Corp. is under license.・iPhone, iPad and
Siri are trademarks of Apple Inc., registered in the U.S. and other countries.・
Android is a trademark of Google Inc.・GLIDiC is a trademark of SB C&S Corp.・All
other company names, brand names, system names and product names
described in the document are generally trademarks or registered trademarks of
respective companies and individuals.
Product Inquiry
https://glidic.jp/support/
©2019 SB C&S Corp. All rights reserved.
V1̲1903

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2019:03:13 14:55:17+08:00
Creator                         : Adobe Illustrator CC 2015.3 (Macintosh)
Modify Date                     : 2019:03:19 14:34:22-07:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2019:03:19 14:34:22-07:00
Creator Tool                    : Adobe Illustrator CC 2015.3 (Macintosh)
Format                          : application/pdf
Title                           : GLIDiCTW-7000_UsersGuide_En_0218
Document ID                     : uuid:6af915bd-7d52-4574-87cb-bc34da6756e8
Instance ID                     : uuid:328742d2-26f5-4dcc-beb5-cd7df1281adb
Producer                        : Adobe PDF library 15.00
Page Count                      : 3

EXIF Metadata provided by EXIF.tools