Download: Mirror Download [FCC.gov] Document ID 1989235 Application ID AJvSGeq16D+UQTPXugHL5A== Document Description Mentor manual Short Term Confidential No Permanent Confidential No Supercede No Document Type User Manual Display Format Adobe Acrobat PDF - pdf Filesize 430.25kB (5378158 bits) Date Submitted 2013-06-13 00:00:00 Date Available 2013-06-13 00:00:00 Creation Date 2013-06-12 11:51:39 Producing Software GPL Ghostscript 9.0 Document Lastmod 2013-06-12 11:51:39 Document Title [GM24]GlucoNavii Mentor NFC_User manual_F[BW].pdf Document Creator PDFCreator Version 1.2.0 Document Author: twyna-to
NFC
Mentor
NFC
Mentor
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
Dear SD GlucoNaviiÂŽ Mentor NFC System Owner;
Thank you for choosing SD GlucoNaviiÂŽ Mentor NFC Blood Glucose
Monitoring System. Your new SD GlucoNaviiÂŽ Mentor NFC Blood Glucose
Monitoring System is an important tool that can help you better manage
your diabetes. Important steps for using the System are inside this guide.
Please read it carefully.
If you have questions, we are here to help.
Please contact SD Biosensor, Inc.
Tel : +82-31-300-0400
Fax : +82-31-300-0499
website : www.sdbiosensor.com
We offer assistance 24 hours a day, 365 days a year in many languages.
You can also visit www.sdbiosensor.com for diabetes management tools
and product demonstrations.
Please refer to the instructions with following symbols in this User
Instruction Guide.
CAUTION
NOTE
To identify conditions
or practices that could
result in damage to
equipment or other
property.
NOTE
To provide an additional
useful information.
Before using any product to test your blood glucose, read
all instructions and practice the test. Do all quality control
checks as directed and consult with a diabetes health
care professional. These recommendations apply to all
blood glucose monitoring systems and are supported
by the American Association of Diabetes Educators, the
American Diabetes Association, the U.S. Food and Drug
Administration, and the Advanced Medical Technology
Association.
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGX
YWXZTW[TX]GGGăä¸G\a\_a[W
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
TABLE OF CONTENTS
TABLE OF CONTENTS
Chapter 1 : Understanding Your New System
1. Before You Start Testing
2. Special Information for Healthcare Providers and
Caregivers
3. Indication for Use
4. Product Description and the Principle of the use
5. The Complete SD GlucoNaviiÂŽ Mentor NFC Blood
Glucose Monitoring System
6. SD GlucoNaviiÂŽ Mentor NFC Meter
7. SD GlucoNaviiÂŽ Mentor NFC Test Strips
8. SD GlucoNaviiÂŽ Mentor NFC Accessories
9. Changing the Battery
10. Meter Set up
11. Using SD GlucoNaviiÂŽ Mentor NFC Test Strips
12
13
14
16
26
Chapter 2 : Control Solution Test
1. Performing a Control Solution Test
2. Troubleshooting Control Solution Test
28
29
32
Chapter 3 : Testing Your Blood Glucose
1. Getting a Drop of Blood
2. Performing a Blood Glucose Test
3. Understanding Test Results
34
34
36
38
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGY
YWXZTW[TX]GGGăä¸G\a\_a[W
Chapter 4 : Using NFC function
1. Information on NFC function
2. Information on Caution for NFC
3. Using NFC function
4. How to use GlucoNavii App
5. How to use GlucoNavii DMS for PC
40
40
40
41
42
43
Chapter 5 : Using the Meter Memory
1. Searching Test Results
2. Downloading results to a computer
45
46
50
Chapter 6 : Maintenance and Troubleshooting
1. Performing a SD Glucose check strip
2. Cleaning the meter
3. Maintenance, Testing and Transportation
4. Cleaning the Lancing Device
5. Screen Messages and Troubleshooting
6. Warnings, Precautions and Limitations
51
51
52
53
54
55
62
Chapter 7 : Product Technical Information
1. System Specifications
64
64
Annex 1 : Information for Healthcare Professionals
Annex 2 : Symbol
Annex 3 : References
66
67
69
TABLE OF CONTENTS
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGZ
YWXZTW[TX]GGGăä¸G\a\_a[X
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
CHAPTER 1 :
Understanding Your New System
The SD GlucoNaviiÂŽ Mentor NFC Blood Glucose Monitoring
System
1. Before You Start Testing
Understanding Your New System
About the meter and test strips
t
Carefully read and follow the instructions in the User
Instruction Guide and Package Inserts for the test strips
and SD Glucose control solution. It is very important to
follow the instructions in order to prevent an incorrect
result or improper treatment.
t
The meter, test strips, and SD Glucose control solution are
only for use outside the body (in vitro).
t
Your new meter is designed for testing fresh capillary
whole blood samples (for example, blood from your
fingertip, palm, upper arm, or forearm).
t
Only use SD GlucoNaviiÂŽ Mentor test strips. Other test
strips will give inaccurate results or E-1 error message.
t
Do not use the SD GlucoNaviiÂŽ Mentor NFC blood glucose
monitoring system for testing of serum or plasma or
arterial blood.
t
Inspect the container of test strips before using them for
the first time. If you see any damage to the container cap
or if anything prevents the cap from closing properly, do
not use test strips. Contact SD Biosensor, Inc. Damaged
test strips can cause inaccurate results, which could lead
to improper treatment.
About your new meter
t
Set the beep, date, time, hypo warning, post-meal alarm
and alarm on your meter before you begin testing.
t
SD GlucoNaviiÂŽ Mentor NFC system has been found to be
accurate at altitudes up to 12,388 feet. (3,776 meters)
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG[
YWXZTW[TX]GGGăä¸G\a\_a[X
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
t
t
CAUTION
t
t
Keep the meter and testing supplies away
from small children.
The battery door, test strips, lancets,
protective disks, and control solution cap are
choking hazards.
Do not eat the test strips.
Do not swallow or inject SD Glucose control
solution, or use control solutions for any
purpose.
Understanding Your New System
Important Information
t Dehydration: Severe dehydration resulting from excessive
water loss may cause false low results. If you believe you
are suffering from severe dehydration, consult a healthcare
professional immediately.
t Low glucose results: If your test result is lower than 70
mg/dL or is shown as Lo, it may mean hypoglycemia(low
blood glucose). This may require immediate treatment
according to your healthcare professionalâs recommendations. Although this result could be due to a test error, it is
safer to treat first, and then repeat the test.
t High glucose results: If your test result is greater than 180
mg/dL or is shown as HI, it may mean hyperglycemia(high
blood glucose). If you do not have symptoms, first repeat
the test. Your healthcare professional can work with you
to decide what actions, if any, you should take if you
continue to get results higher than 180 mg/dL or if you
have symptoms.
t Repeated unexpected results: If you continue to get
unexpected results, check your system with control
solution. See Checking the System with Control Solution .
If you are experiencing symptoms that are not consistent
with your blood glucose results and you have followed
all instructions in this User Instruction Guide, call your
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG\
YWXZTW[TX]GGGăä¸G\a\_a[X
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
t
healthcare professional. Never ignore symptoms or make
significant changes to your diabetes control program
without speaking to your healthcare professional.
Consult your physician to determine if it is appropriate for
your child to be taught how to use the meter system or
any other medical products.
2. Special Information for Healthcare Providers and
Caregivers
t
t
Do not use this device to measure blood glucose in
people who are experiencing cardiovascular collapse
(severe shock) or decreased peripheral blood flow.
Hematocrit: A hematocrit (percentage of your blood that
is red blood cells) that is over 60% or below 20% can cause
false results.
3. Indication for use (Purpose of the devices)
Understanding Your New System
Your new SD GlucoNaviiÂŽ Mentor NFC meter and accessories
work together to measure the amount of glucose (sugar) in
your blood.
Your SD GlucoNaviiÂŽ Mentor blood glucose monitoring
system is indicated for monitoring glucose in fresh
capillary whole blood or fresh venous blood. Testing
is done outside the body. (in vitro diagnostic use) This
system is indicated for home (over-the-counter or OTC) by
person with diabetes, or in clinical settings by healthcare
professionals, as an aid to monitor the effectiveness of
diabetes control. This system should not be used for the
diagnosis of diabetes.
The SD GlucoNaviiÂŽ Mentor NFC blood glucose monitoring
system is suitable for self-testing.
4. Product Description and the Principle of the use
SD GlucoNaviiÂŽ Mentor test strip is designed with an
electrode that measures glucose levels. Glucose in the
blood sample mixes with reagent on the test strip that
cause a small electric current. The amount of current that
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG]
YWXZTW[TX]GGGăä¸G\a\_a[X
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
is created depends on how much glucose is in the blood.
SD GlucoNaviiÂŽ Mentor NFC meter measures the current
that is created and converts the measurement to the
amount of glucose that is in the blood.
The blood glucose result is displayed on the meterâs LCD
display.
By touching a drop of blood to the tip of the SD
GlucoNaviiÂŽ Mentor test strip, the stripâs reaction chamber
automatically draws the blood into the strip through
capillary action. When the chamber is full, SD GlucoNaviiÂŽ
Mentor NFC meter start to measure the blood glucose
level. It is a simple and practical system for the daily
monitoring of your blood glucose level.
5. The Complete GlucoNaviiÂŽ NFC BGMS
Understanding Your New System
The system includes:
t
SD GlucoNaviiÂŽ Mentor NFC Meter
t
SD Glucose Check strip
t
3V battery type CR2032
t
User Instruction Guide
t
Quick Guide
t
Carrying Case
t
Lancing device
t
Lancet
t
SD GlucoNaviiÂŽ Mentor Test strips
t
SD GlucoNaviiÂŽ Mentor Package Insert
t
SD Glucose Control Solution
t
SD Glucose Control Solution Package Insert
t
Self-test Diary
t
GlucoNavii Application for Android phone
t
GlucoNavii DMS for PC
t
NFC Reader/Writer
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG^
YWXZTW[TX]GGGăä¸G\a\_a[X
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
6. SD GlucoNaviiÂŽ Mentor NFC Meter
NFC
Display
Shows blood glucose
result, messages, and
glucose result stored in
memory.
ON/OFF Button
Press to turn meter ON or
OFF.
Mentor
Arrow Buttons
Use for meter setup and
review of memory moving
to the right and left.
Understanding Your New System
Test Strip Slot
Insert test strip here.
Data port
Cominucate test results
with a personal computer.
(If you have software)
Battery Cover
Remove cover to
change battery.
Location of NFC function
Tap a smartphone or SD NFC
R/W for communication.
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG_
YWXZTW[TX]GGGăä¸G\a\_a[X
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
Indicates
Measurement time
Indicates during the meter
setting
Indicates beep
setting
Warns when the
battery is low or must be
replaced
Indicates if
environmental
temperature is
exceeded during
testing
Indicates post-meal or
pre-meal
Testing date
Indicates a test result stored
in memory
Unit of test result
Test result and nfc
message
Understanding Your New System
Display
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG`
YWXZTW[TX]GGGăä¸G\a\_a[X
Understanding Your New System
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
Indicates the
average result
Test strip
Tell you when to
apply the sample
and indicates if you
select whole blood
for blood reference
type
Indicates a control
solution test result
Indicates alarm
setting
Indicates hypo warning
Indicates S/W communication
10
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGXW
YWXZTW[TX]GGGăä¸G\a\_a[Y
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
2) Blood Stand-by Display
If a test strip is inserted into the meter in either Strip Standby Display or turning off, the below will be displayed
automatically to show the appropriate test result after
applying blood sample. And if you pull off the test strip,
it will return to Strip Stand-by Display. In this Blood Standby Display, the ON/OFF button doesnât act. But if you need
to check the meter or the test strip, you may use a control
solution. Then the control solution icon in the left-side of
test strip icon will be displayed by pressing left button
during 3 seconds.
Understanding Your New System
1) Strip Stand-by Display
After turning on the meter, the below will be displayed
automatically to show the test strip icon flashing. In this
Strip Stand-by Display, itâs able to enter setting mode of the
meter or search the test results.
11
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGXX
YWXZTW[TX]GGGăä¸G\a\_a[Y
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
7.
SD GlucoNaviiÂŽ Mentor Test Strip
SD GlucoNaviiÂŽ Mentor NFC System measures the amount
of glucose in whole blood. Blood is applied in the Yellow
Window (TOP EDGE) of SD GlucoNaviiÂŽ Mentor Test Strip
and is automatically drawn into the reaction cell where
the reaction takes place.
Understanding Your New System
(Top Edge)
12
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGXY
YWXZTW[TX]GGGăä¸G\a\_a[Y
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
8. SD GlucoNaviiÂŽ Mentor NFC Accessories
Lancet
SD Glucose check strip
Electrode
Check
Strip
Arming
Knob
Release
Button
SD GlucoNaviiÂŽ control solution
NFC Reader/Writer
Arming
Knob
Understanding Your New System
Lancing Device
Cap & Comfort dial with puncture depth
selection
13
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGXZ
YWXZTW[TX]GGGăä¸G\a\_a[Z
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
9. Changing the Battery
Inserting and replacing the Battery
Your meter is shipped with one 3V battery type CR2032
that needs to be inserted before testing. The battery that
comes with your meter can be found in the mesh pocket
of your carrying case. Battery life will vary depending on
usage, so always keep a spare on hand. The meter saves
battery power by automatically turning off after 1 minute
without inserting a test strip or 3 minutes with a test strip,
from non-use. If the meter does automatically shut off, all
tests in memory are saved.
Understanding Your New System
STEP-1: Push the recessed plastic tab of the battery
compartment forward to flip and open the battery door.
14
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGX[
YWXZTW[TX]GGGăä¸G\a\_a[Z
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
STEP-2: Insert the 3V battery (type CR2032) into the
compartment with â+â side facing you.
STEP-4: Push the ON/OFF button or insert a strip to start
testing.
NOTE
After inserting or replacing the battery, confirm
that the time and date are set correctly. If they
are not, use the ON/OFF and left/right buttons to
reset the meter before testing. See the â10. Meter
Set upâ.
Understanding Your New System
STEP-3: Snap battery cover back in place.
15
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGX\
YWXZTW[TX]GGGăä¸G\a\_a[Z
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
10. Meter Set up
STEP-1 : Setting the Audible Beep
1. In Strip Stand-by Display, if you press the ON/OFF
button during 3 seconds, the display for setting the
beep will appear, the first step of the setting mode.
Understanding Your New System
[ During 3 sec. ]
2.
Set the beep mode on or off b y pressing either
the left or the right button and then selecting the
preferred feature by pressing the ON/OFF button. If
you select the beep on feature, a âbeepâ sound is made
at the same time; otherwise, if you select the beep off
feature, no sound is made.
Ment
Mentor
[ Left or right
button ]
[ ON/OFF
button ]
16
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGX]
YWXZTW[TX]GGGăä¸G\a\_a[[
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
STEP-2: Setting the Hypo warning
NOTE
t
You can set the meter to let you know when
your result indicates a possible low blood
glucose (hypoglycemia). You can also select
what blood glucose level you want this
indicator to have 60, 70, 80 mg/dL(3.3, 3.9, 4.4
mmol/L).
If your results are lower than selected hypo
result, the candy symbol will appear on LCD
with a âbeepâ sound. It is very important to
manage your hypoglycemia.
1.
After beep setting, the display for setting the hypo
warning will appear, the second of setting mode.
2.
Set the hypo warning mode âoffâ or the result you want
to select among 60, 70, 80 mg/dL(3.3, 3.9, 4.4 mmol/L)
by pressing either the left or the right button and then
selecting the preferred feature by pressing the ON/OFF
button.
Understanding Your New System
t
17
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGX^
YWXZTW[TX]GGGăä¸G\a\_a[\
Understanding Your New System
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
NOTE
Your new meter comes with a preset time and
date. You may need to change the time to your
time zone. Having the right time and date in your
meter is important if you use the meter memory.
It also helps your healthcare team interpret your
results.
STEP-3: Setting the date and time
[ Date Setting ]
1. The third step of setting mode is the Date & Time
setting. After setting the hypo warning, the display for
setting Date & Time will appear, the third step of the
setting mode. Set the correct year by pressing either
the left or the right button and then select the correct
year by pressing the ON/OFF button.
18
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGX_
YWXZTW[TX]GGGăä¸G\a\_a[\
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
Ment
Mentor
[ ON/OFF
button ]
2.
Next will appear the setting display for month and day
format. The meter can display the month and day in
either a Month-Day (m-d) format or a Day-Month (dm) format. Set the preferred format on the display by
pressing either the left or the right button and select by
pressing the ON/OFF button.
3.
Set the correct month or day on the display by pressing
either the left or the right button and select by pressing
the ON/OFF button.
Understanding Your New System
[ Left or right
button ]
19
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGX`
YWXZTW[TX]GGGăä¸G\a\_a[]
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
[ Time Setting ]
1. Next will appear the display for setting the 12 or 24 Hour
clock format. The meter can display the time in either
the 12h format or the 24h format. Set the preferred
format on the display by pressing either the left or the
right button and select by pressing the ON/OFF button.
Understanding Your New System
Ment
Mentor
[ Left or right
button ]
2.
[ ON/OFF
button ]
Next will appear the setting display for time format. Set
the correct hour and minute on the display by pressing
either the left or the right button and select the correct
time by pressing the ON/OFF button.
20
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGYW
YWXZTW[TX]GGGăä¸G\a\_a[^
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
STEP-4: Post-meal alarm
You can use the meterâs post-meal alarm function to
remind you to test your blood glucose after meal.
After day and time setting, the display for setting the
post-meal alarm will appear the fourth of setting mode.
2.
Set the post-meal alarm mode â2hâ or âoffâ by pressing
either the left or the right button and then select the
preferred feature by pressing the ON/OFF button.
Ment
Mentor
[ Left or right
button ]
[ ON/OFF
button ]
Understanding Your New System
1.
21
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGYX
YWXZTW[TX]GGGăä¸G\a\_a[_
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
t
t
NOTE
Understanding Your New System
t
If you select the post-meal alarm â2hâ feature
and test with pre-meal mark, the âclock
symbolâ will appear on result display and
the âbeepâ sound will be made in 2 hours to
remind you to test your blood glucose after
meal for 1mimute.
If you perform the pre-meal test while the
post-meal alarm setting is on, then the postmeal mark will appear automatically on your
LCD when you test within following period:
from 30min to 130min after your pre-meal
test.
If you mark the new test result with a premeal mark, the old alarm setting will be
ignored and only the new setting will sound
in 2 hours.
22
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGYY
YWXZTW[TX]GGGăä¸G\a\_a[_
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
STEP-5: Setting the alarm
You can use the meterâs alarm function to remind you to
test your blood glucose.
After Post-meal alarm setting the display for setting the
alarm will appear, the fifth of setting mode.
2.
Set the first alarm on or off by pressing either the left or
the right button and then select the preferred feature
by pressing the ON/OFF button.
Ment
Mentor
[ Left or right
button ]
t
t
NOTE
[ ON/OFF
button ]
If you select the alarm off feature, next will
appear the Strip Stand-by Display.
If you select the alarm on feature, you can set
the alarm up to four times a day at any time
you want.
Understanding Your New System
1.
23
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGYZ
YWXZTW[TX]GGGăä¸G\a\_a[`
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
3.
If you select the alarm on feature in first alarm mode,
the clock will blink. Set the correct time and minute you
want to set an alarm on the display by pressing either
the left or the right button and then select the preferred
feature by pressing the ON/OFF button.
Ment
Mentor
[ Left or right
button ]
Understanding Your New System
NOTE
[ ON/OFF
button ]
If you select the alarm off feature in first (also
second, third and fourth) alarm mode, next will
appear the Strip Stand-by Display.
4.
If you finish setting the first alarm, next will appear the
second alarm setting mode. Set the alarm with the same
way as above. [2, 3]
5.
You can set the third and fourth alarm mode with the
same way as above. [2, 3]
24
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGY[
YWXZTW[TX]GGGăä¸G\a\_a\X
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
If you finish alarm setting, next appear at the stripstand by display.
Understanding Your New System
NOTE
25
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGY\
YWXZTW[TX]GGGăä¸G\a\_a\Z
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
11. Using SD GlucoNaviiÂŽ Mentor NFC Test Strips
Understanding Your New System
[ Important Test Strip Information ]
t
SD GlucoNaviiÂŽ Mentor NFC blood glucose test strip
should be used with SD GlucoNaviiÂŽ Mentor NFC meter.
Using other glucose test strip can cause inaccurate the
result or âE-1â error message.
t
After removing a test strip from the container, replace the
container cap immediately and close it tightly.
t
Use the test strip within three minutes after you take it out
of the container.
t
Store test strip containers in a cool, dry place at 2-32°C(3690°F). Keep away from direct sunlight and heat. Do not
refrigerate test strips.
t
Do not expose strips to heat, moisture or humidity.
Temperatures outside the required range, as well as
moisture and humidity (e.g. bathroom, kitchen, laundry
room, car, or garage) can damage your test strips and lead
to inaccurate results.
t
Store test strips in their original container only to avoid
damage or contamination. Do not transfer test strips to
any other storage device, and do not store outside of their
original container.
t
Do not use test strips from any container that is damaged
or left open to air.
t
Write the opening date on the container label when you
first open it. Discard remaining SD GlucoNaviiÂŽ Mentor Test
Strips after the discard date. (6 months after first opening
from the container.)
t
SD GlucoNaviiÂŽ Mentor Test Strips are for single use only.
Never reuse a test strip that has had either blood or
control solution applied to it.
26
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGY]
YWXZTW[TX]GGGăä¸G\a\_a\Z
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
t
Avoid getting dirt, food or liquids on the test strip. With
clean, dry hands, you may touch the test strip anywhere
on its surface.
t
Do not bend, cut, or alter SD GlucoNaviiÂŽ Mentor Test Strip
in any way.
Understanding Your New System
CAUTION
Do not swallow test strips. The test strip container
may contain drying agents that are harmful if
inhaled or swallowed and may cause skin or eye
irritation.
27
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGY^
YWXZTW[TX]GGGăä¸G\a\_a\Z
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
CHAPTER 2 :
Control Solution Test
Why you do control solution test ;
t
SD Glucose control solution is used to check that the
meter and the test strips are working together as a system
and that you are performing the test correctly.
t
It is very important that you do this simple check routinely
to make sure you get an accurate result.
Control Solution Test
When you do control solution test ;
t
You open a new box test strips.
t
You left the test strip container open or you think your test
strips have been damaged.
t
Your test strips were stored in extreme temperatures and/
or humidity.
t
You want to check the meter and test strips.
t
You dropped the meter.
t
Your test result does not agree with how you feel.
t
You want to check if you are testing correctly.
Before you begin ;
t
Use only SD Glucose control solution.
t
Check the expiration date on the control solution
container. Record the opening date on the container label.
Do Not use after expiration or discard date (date opened
plus three months), whichever comes first.
t
Control solution, meter and test strips should be at room
temperature 18-30°C (64-86°F) before testing with control
solution.
28
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGY_
YWXZTW[TX]GGGăä¸G\a\_a\Z
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
t
Shake the container, discard the first drop of control
solution, and wipe off the tip to ensure a proper sample
and an accurate result.
Store SD Glucose control solution tightly closed at
temperatures between 8-30°C (46-86°F). Do Not refrigerate.
t
t
CAUTION
t
Do not swallow SD Glucose control solution; it
is not for human consumption.
Do not apply SD Glucose control solution to
the skin or eyes as it may cause irritation.
1. Performing Control Solution Test
NOTE
A set of Level M and H control solutions is available
for purchase. To order control solutions, talk
to your pharmacist or medical surgical supply
dealers. Your meter is designed to recognize the
difference between Control Solution and blood.
The meter automatically stores the test results
using a control solution, letting your review them.
But the meter does not include them in averages.
Control Solution Test
You need the meter, a test strip, and control solution Level M or
Level H. The control level is printed on the test strip label.
For more information how to obtain SD Glucose control
solution, call at +82-31-300-0400.
29
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGY`
YWXZTW[TX]GGGăä¸G\a\_a\Z
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
STEP-1:
1) Remove a new test strip from container. Be sure to
tightly replace container cap after removing test strip.
2) Insert a test strip (yellow window printed âMentorâ facing
up) into test strip slot. The meter turns on automatically.
NFC
Mentor
STEP-2:
1) Press the left button for 3 seconds to check the testing
system using a control solution in Blood Stand-by
Display. If you donât want a control solution test, press
the left button again.
Control Solution Test
Mentor
[ Left
button ]
2)
Shake the control solution container and discard the
first drop of solution. Gently squeeze the container
to form one small drop. Bring the drop to the edge of
the strip, and allow the strip to automatically draw the
control solution into the yellow window. When control
solution is applied to the test strip, the meter counts
down from 5 to 1 second on the display. Tightly replace
the cap on control solution.
30
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGZW
YWXZTW[TX]GGGăä¸G\a\_a\[
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
3)
4)
The control solution result appears on the screen in just
5 seconds.
Compare control solution result with the range printed
on the test strip container.
If the results are not within the control range printed on
the test strip container, then the meter and strips may
not be working properly. Repeat the control solution
test.
NFC
Mentor
5)
Remove the used test strip for control solution from
the meter and discard it.
[Example]
Control Range
NOTE
mg/dL
mmol/L
Level M
Level H
90-140 mg/dL
170-240 mg/dL
5.0-7.8 mmol/L
9.4-13.3 mmol/L
[This is an example. Refer to the ranges on your test
strip container.]
Control Solution Test
The control solution range printed on the test strip
container is for SD GlucoNaviiÂŽ Control Solution only.
It is not a recommended range for your blood
glucose level.
31
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGZX
YWXZTW[TX]GGGăä¸G\a\_a\[
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
Control Solution Test
2. Troubleshooting Control Solution Test
Check
Action
Did you do the test in
control solution mode?
Did you see âcontrol
solution container iconâ
on the screen with the
result?
If not, do the test again. Insert a
test strip; Press the left button
for 3 seconds in Blood Standby Display to display a control
solution container icon.
Have the test strips
and/or control solution
expired?
Make sure that test strips and
control solutions are not past
expiration date. This date is
shown the container/bottle.
Make sure the expiration date
of both a test strip and a control
solution.(test strip : 6 months,
control solution : 3months)
Were control solutions
at room temperature
(18-30°C, 64-86°F) when
used?
If not, retest with new bottle
of control solution, or warm
up/cool down to room
temperature.
(18-30°C, 64-86°F)
32
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGZY
YWXZTW[TX]GGGăä¸G\a\_a\[
Check
Action
Did you insert test strip
firmly into meter?
Make sure test strip is inserted
into the test strip slot until it will
go on further.
Did you follow the
procedure correctly?
Read again âChapter 2 : Control
Solution Testâ (pages 28-33) and
retest.
Were test strips stored
correctly? (at 2-32°C,
36-90°F) Was the
bottle cap replaced
immediately after
removing a test strip?
If not, retest with a new
container of test strips.
Is the meter damaged?
Does it show an error
message?
If yes, contact
SD Biosensor, Inc. at
+82-31-300-0400.
Is the control result
outside the acceptable
range(printed on your
test strip container)?
Repeat the test. If you get the
same results, do not use your
meter and test strip until you
solve the problem. If you still
have problem, call SD Biosensor,
Inc. at +82-31-300-0400.
Control Solution Test
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
33
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGZZ
YWXZTW[TX]GGGăä¸G\a\_a\[
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
CHAPTER 3 :
Testing Your Blood Glucose
1. Getting a Drop of Blood
1)
2)
Wash your hands in warm, soapy water. Rinse well and
dry completely. Warming fingers can increase blood flow.
Turn the lancet insert cap counterclockwise to remove
it, insert the lancet into the lancing device holder and
push down firmly until it is fully seated. Twist the lancet
protective disk until it separates from the lancet.
Replace the cap and turn it clockwise, until it is snug.
Adjust the puncture depth setting by turning the
comfort dial. The dial has 1 to 5 steps, and the higher
the step number, the stronger the blood sampling
pressure on the puncture site.
The comport tip offers 5 different levels of skin
penetration.
t
1-2 : for soft or thin skin
t
3 : for average skin
t
4-5 : for thick or callused skin
Testing Your Blood Sugar
3)
34
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGZ[
YWXZTW[TX]GGGăä¸G\a\_a\\
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
4)
After cocking the lancing device back, hold the lancing
device firmly against the side of finger and then press
the release button.
CAUTION
t
A lancet should only be used once. Do not
share used lancets with another person. To
prevent possible infection, a used lancet
should not be touched by another person.
Used lancets in the regular trash can be
dangerous. We recommend that you throw
out the used lancets in sharps containers or
test strip vials. Please be sure to save the cap
so that the lancets cannot spill out of the
container into the trash.
Testing Your Blood Sugar
t
35
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGZ\
YWXZTW[TX]GGGăä¸G\a\_a\]
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
2. Performing a Blood Glucose Test
NOTE
1)
2)
Always wash hands with warm, soapy water. Rinse
and dry them before testing.
Remove a new test strip from container. Be sure to tightly
replace container cap after removing test strip.
Make sure the meter turn off. And then, insert the test strip
into the meter.
NFC
Testing Your Blood Sugar
Mentor
3)
When the blood drop symbol flashes (Blood Stand-by
Display), you are ready to perform a test.
4)
Let your arm hang down at your side to allow blood to
flow to your fingertips. Grasp your finger just below the
joint closest to the fingertip.
Obtain a drop of blood sample using the lancet and
lancing device.
Hold your finger to the tip of the strip until the yellow
window is completely filled with blood. Do not place the
blood drop on top of the strip.
5)
6)
36
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGZ]
YWXZTW[TX]GGGăä¸G\a\_a\]
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
The blood will be drawn into the strip automatically. If
beeper is turned on, meter will beep to let you know the
test is beginning.
8) When blood is applied to the strip, start the test.
9) You can set the pre-meal or post-meal test if you want. The
symbol indicating pre-meal( ) or post-meal( ) appears
on the screen. Choose what you want by pressing the left
or right button. If you press the On/Off button, no select
any features.
10) After applying the blood, the test result will appear for 5
seconds.
11) When the test is done, pull out the used test strip and
discard it.
t
t
NOTE
t
Remove the inserted lancet from the lancing
device and dispose the used lancet with care.
Always use fresh capillary or venous whole blood
for tests.
If you want to use NFC function, refer to âChapter
4. Using the NFC functionâ on page 40~44 .
Testing Your Blood Sugar
7)
37
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGZ^
YWXZTW[TX]GGGăä¸G\a\_a\]
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
3. Understanding Test Results
Your test results
1. After 5 seconds testing time from applying a blood
into strip, you will receive a normal result, 10mg/dL
to 600mg/dL.
CAUTION
Testing Your Blood Sugar
2.
If you perform the pre-meal test while the postmeal alarm setting is on, then the post-meal mark
will appear automatically on your LCD when
you test within following period: from 30min to
130min after your Pre-meal test.
If your blood glucose is above 600 mg/dL, you
will receive a âHIâ and is below 10 mg/dL, you will
receive âLoâ. In these cases, repeat the test with new
test strip. If this message show again, contact your
healthcare professional immediately.
38
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGZ_
YWXZTW[TX]GGGăä¸G\a\_a\]
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
Normal Blood Glucose Readings
The normal fasting blood glucose range for an adult
without diabetes is 74 - 106 mg/dL.2
Two hours after meals, the blood glucose range for an
adult without diabetes is less than 140 mg/dL.1
t
'BTUJOHUPNHE-
t
IPVSTBGUFSNFBMTNHE-
What This Means For You
Frequent blood glucose testing is the best means to track
how well you are doing with your diabetes management.
It helps you track the effects of medications, diet, exercise,
and stress management. Blood glucose test results can
also tell you if your diabetes is changing. This may alert
you to adjust your treatment plan. Always consult your
healthcare professional before making any adjustments.
Testing Your Blood Sugar
Frequency of Testing
Work with your healthcare professional to decide when
and how often to test. This will depend on such things as
age, type of diabetes, and medications. It is important to
make testing part of your daily routine.
39
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGGZ`
YWXZTW[TX]GGGăä¸G\a\_a\]
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
Chapter 4:
Using NFC function
1. Information on NFC function
NFC(Near field communication) is a set of standards for smartphones
and similar devices to establish radio communication with each
other by touching them together or bringing them into close
proximit.
This function is comfortable for test results back-up at PC or
smartphones. So, you can easily monitor your blood glucose
results.
SD GlucoNaviiÂŽ Mentor NFC follows âFelicaâ standard which
include ISO/IEC 18092.
Using NFC function
2. Information on Caution for NFC
t
Check your smatphone or PC OS version. For PC, It is
available for Windows XP, Windows VISTA, Windows 7 and
need to NFC Reader/Writer purchased separately.
t
For smartphone, It is available for only smartphones with
Android OS v.2.3.1 or higher. Check the list in www.nfcworld.
com/nfc-data/android/.
Before using this function, check the meter turn off. If turn
the meter on, you cannot use NFC function.
Check the location of chip for NFC in your smartphone. It
is different by manufacturer. For more information, refer to
manufacturer website of your smartphone.
SD NFC software for PC is able to download at www.
sdbiosensor.com .
If the distance between the meter and a smartphone(or NFC
Reader/Writer) is far(about over 2cm/0.06ft), NFC function is
not operated.
t
t
t
t
40
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG[W
YWXZTW[TX]GGGăä¸G\a\_a\]
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
3. Using NFC function
1)
2)
Check the location of NFC at your smartphone.
If you tap SD GlucoNaviiÂŽ Mentor NFC to your
smartphone, two kinds of action are happened. First,
start GlucoNavii App., seconds, upload the glucose
results stored in SD GlucoNaviiÂŽ Mentor NFC meter to
smartphone.
3)
After finishing the communication, check that the test
NOTE
More information on App or software for PC, refer to
each manual.
Using NFC function
results are transferred well in your smartphone or PC.
41
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG[X
YWXZTW[TX]GGGăä¸G\a\_a\^
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
4. How to use GlucoNavii App
1)
Download & Install
t
Search âGlucoNaviiâ in Google Play at your
smartphone. You can search other keyword that
are âSD Biosensorâ.
t
Install GlucoNavii App. in your smartphone.
NFC enabled smartphone with Android OS v.2.3.1 or
higher.
Check the list in http://www.nfcworld.com/nfc-data/
android/.
NOTE
t
2)
Check the NFC function at your smartphone. If it is
the âOffâ setting, turn NFC function âOnâ.
Communicate with SD GlucoNaviiÂŽ Mentor NFC meter
t
If you tap SD GlucoNaviiÂŽ Mentor NFC meter to
your smart-phone, two kinds of action will be
happened. First, if App. is not turning it on, start
App. Seconds, if App. is already running, please,
wait a minute to upload test results.
Please remember the points of contact for both devices.
NOTE
Using NFC function
3)
Utilize GlucoNavii App
(1) Start App.
(2) If you need to upload new data, just tap SD GlucoNavii
NFC meter to your smartphone.
42
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG[Y
YWXZTW[TX]GGGăä¸G\a\_a\^
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
5. How to use GlucoNavii DMS for PC
1)
2)
3)
4)
NOTE
Download the software at www.sdbiosensor.com. And
then, start the software.
Turn the meter off. If not, you cannot start NFC function.
Tap the meter with NFC Reader/Writer plugged with PC.
And then, start the communication.
After finishing the communication, you can look the log
book(test results) or graph.
More information on App or software for PC, refer to
each manual.
If you have any question or queries about GlucoNavii
App.or GlucoNavii DMS for PC, please email to (SD_Dev@
sdbiosensor.com).
European Union Directive Conformance Statement
Hereby, SD Biosensor declares that SD GlucoNaviiÂŽ
Mentor NFC blood glucose meter is in compliance
with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
You can view your productâs Declaration of
Conformity(DoC) to Derictives 1995/5/EC(R&TTE)
Directive at www.sdbiosensor.com.
CAUTION
WARNING: Changes or modifications made to this
equipment not expressly approved by SD Biosensor,
Inc. for compliance could void the userâs authority to
operate the equipment.
Using NFC function
NOTE
43
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG[Z
YWXZTW[TX]GGGăä¸G\a\_a\^
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
Using NFC function
NOTE
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
t
Reorient or relocate the receiving antenna.
t
Increase the separation between the equipment
and receiver.
t
Connect the equipment into an outlet on a circuit
different.
t
from that to which the receiver is connected.
t
Consult the dealer or an experienced radio/TV
technician for help.
44
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG[[
YWXZTW[TX]GGGăä¸G\a\_a\^
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
CHAPTER 5 :
Using the Meter Memory
Using the Meter Memory
The meter automatically stores about 300 glucose results,
letting your review them in order from the most recent to
the oldest. If you have set the time/date feature, the time
and date of the results are also displayed. If the memory is
full and a new result is added, the meter deletes the oldest
result.
The meter also calculates three kinds of 7, 14 and 30-day
averages of test results stored in memory, 1)normal, 2)premeal and 3)post-meal state averages. You do not need to
set the time and date for the meter to give you average
calculations. HI/Lo result (results outside of the meterâs
reading range) and results with control solution symbol are
not included in averages.
45
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG[\
YWXZTW[TX]GGGăä¸G\a\_a\^
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
1. Searching Test Results
1)
In Strip Stand-by Display, press the left arrow button
to review in sequence from the most recent test result
to the last test results stored in memory.
Mentor
[ Left button ]
Using the Meter Memory
[Normal result]
[Pre-meal result]
[Post-meal result]
46
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG[]
YWXZTW[TX]GGGăä¸G\a\_a\_
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
[Control Solution result]
If there arenât the stored test results, the following
display appears for 1 second, and then the meter will
display Strip Stand-by Display automatically.
Using the Meter Memory
2)
47
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG[^
YWXZTW[TX]GGGăä¸G\a\_a\_
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
3)
In Strip Stand-by Display, press the right arrow button
to review three kinds of 7,14 and 30 day averages of
test result stored in memory in sequence. (normal,
pre-meal and post-meal state) You can also review the
number of results at each average in the right bottom
of the LCD window. If you press the right arrow button
once more after displaying the 30 day average(with
post-meal mark), the 7-day average result appear
again.
Using the Meter Memory
[ Normal average ]
[Pre-meal average]
[Post-meal average]
48
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG[_
YWXZTW[TX]GGGăä¸G\a\_a\_
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
NOTE
If there arenât any stored 7, 14 and 30-day average of
test results, following display will appear on the LCD.
You cannot search the stored test results and
average of results in the meter, if a test strip is
inserted in the meter, Blood Stand-by Display.
After removing the test strip from the meter, you
can search the test results and average of results
stored in memory by pressing the left or the right
button.
Using the Meter Memory
4)
49
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG[`
YWXZTW[TX]GGGăä¸G\a\_a\_
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
2. Downloading results to a computer
You can use your meter with GlucoNavii DMS to store your
records and to help you spot patterns for planning meals,
exercise, and medication.
GlucoNavii DMS puts information downloaded from the
meter into charts, diagrams and graphs.
1)
2)
Using the Meter Memory
NOTE
Obtain the GlucoNavii DMS and NFC Reader/Writer.
Install the software on a personal computer. Please
refer to Software Product Manual.
t While the meter is connected to the PC, it is
unable to perform a blood glucose test.
t For downloading GlucoNavii DMS and Software
Product manual(both are free of charge), please
visit www.sdbiosensor.com.
t For ordering NFC Reader/Writer, please contact
our representative.
t For more information,please refer to Software
Product Manual. If the cable port got ESD while
downloading data, time delay, a few seconds, may
be happened. After a while, the meter retransmit
data automatically.
50
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG\W
YWXZTW[TX]GGGăä¸G\a\_a\_
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
CHAPTER 6 :
Maintenance and Troubleshooting
1. Performing Check strip Test
When you do the check strip test?
t
When you want to easily check the performance of the
meter.
t
Before using your meter for the first time.
t
Whenever your result does not agree with the level
you feel.
t
If you have repeated a test and the blood glucose
result is still lower or higher than expected.
Check Strip test does not replace Control Solution
test.
How to Use the check strip
1. Insert SD Glucose Check strip (facing up âCheck stripâ
printed in arming knob) into test strip slot. The meter
turns on automatically.
2. If the check strip is inserted properly, the meter will
start the check.
NFC
Mentor
Maintenance and Troubleshooting
CAUTION
51
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG\X
YWXZTW[TX]GGGăä¸G\a\_a\_
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
3.
The check result appears on the screen in 5 seconds.
âOKâ message appears on the screen if there isnât any
problem for the meter. If not, âEEEâ message appears
on the screen.
[ âOKâ
Message ]
[ âEEEâ
Message ]
Maintenance and Troubleshooting
2. Cleaning the meter
Caring for SD GlucoNaviiÂŽ Mentor NFC meter is easy. Just
keep it free of dust. If you need to clean it, follow these
guideline carefully to help you get the best performance
possible.
To prevent malfunction of the meter, keep the test strip
port free of blood, moisture, dirt, or dust. Use a lint-free
cloth dampened with water to clean meter. Thoroughly
wring out cloth before use. Do not use an abrasive cloth
or antiseptic solution, as these may damage the display
screen.
52
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG\Y
YWXZTW[TX]GGGăä¸G\a\_a\`
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
3. Maintenance, Testing and Transportation
Precautions for Maintenance, Testing and Transportation
1) Meter
t
Keep the test strip slot free of dust.
t
Protect the internal meter from humidity.
t
The carrying case is designed to let you store a variety
of supplies you may need and helps to protect your
meter.
t
If you keep the meter with the battery inserted, then
keep it in a low humidity environment.
t
Do not modify the meter, such as resembling or
remodeling, NFC function is not operated well. If any
function is not perated, please contact SD Biosensor,
Inc.
2) Test strip
t
The test strip is sensitive to humidity, keep it in a dry
and cool environment, and do not store in direct
sunlight.
t
After pulling out the test strip from its container, close
a container cap of the test strip immediately.
t
The test strip container closes tightly and can protect
the test strips, so you should keep the unused test
strips in the container in which they came.
Maintenance and Troubleshooting
The meter needs little or no maintenance with normal use.
It automatically tests its own systems every time you turn it
on and lets you know if something is wrong. If you drop the
meter or think it is not giving accurate results, make sure
that your test strips and control solution havenât expired,
and then run a control solution test.
53
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG\Z
YWXZTW[TX]GGGăä¸G\a\_a\`
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
Maintenance and Troubleshooting
3) Lancet and Lancing device
t
The needle of lancet is sharp, keep the lancet away from
children.
t
Keep the lancet and lancing device dry and do not store
in direct sunlight, or high heat and humidity locations.
t
A lancet should not use for the other intended use except
sampling blood.
t
A lancet is for single use only. Do not reuse.
t
A lancet provided with SD GlucoNaviiÂŽ Mentor NFC
Blood glucose meter is able to use every lancing devices
manufactured by other company. But if at all possible,
use the lancing device manufactured by SD Biosensor,
Inc.
t
Before using, check a packaging condition, if there is any
problem, you should not use it.
t
If a lancet protective disk is loosed or needle of a lancet is
exposed, you should not use it.
t
To reduce the chance of infection for the used lancet,
discard it.
4) Control solution
t
Keep SD Glucose control solution in 8-30°C (46-86°F)
environment.
t
Do not refrigerate or freeze.
t
Do not use SD Glucose control solution that has
passed the expiration date.
t
SD Glucose control solution can be used for 3 months
after opening the container. Write the opened date on
the container when you first opened.
t
No reconstitution or dilution is necessary.
t
Wipe the container tip clean and reseal the container
tightly after each use.
4. Cleaning the Lancing Device
Clean the outside of SD lancing device regularly with
70% isopropyl (rubbing) alcohol. Do not place the entire
device under water. Do not use bleach. At least once a
week, disinfect the cap after cleaning by placing it in 70%
rubbing alcohol for 10 minutes. Allow the cap to air-dry
after disinfecting.
54
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG\[
YWXZTW[TX]GGGăä¸G\a\_a\`
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
5. Screen Messages and Troubleshooting
Message Description
t
The meter turns on normally.
[Blood Stand-by Display]
t
The meter is ready for a drop of
blood.
Maintenance and Troubleshooting
[Strip Stand-by Display]
t
The meter is ready for you to
insert a test strip.
55
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG\\
YWXZTW[TX]GGGăä¸G\a\_a\`
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
The meter shows the test result.
Maintenance and Troubleshooting
t
56
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG\]
YWXZTW[TX]GGGăä¸G\a\_a\`
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
t
The meter shows three kinds of average of results.
[Normal Results Average]
[Post-meal Results Average]
Maintenance and Troubleshooting
[Pre-meal Results Average]
57
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG\^
YWXZTW[TX]GGGăä¸G\a\_a\`
Maintenance and Troubleshooting
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
t
The meter shows the saved results of blood glucose.
t
The meter is ready for a drop of control solution.
58
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG\_
YWXZTW[TX]GGGăä¸G\a\`aWW
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
t
t
[Low battery]
At this time, battery is getting low but you can still
perform about 50 tests. Replace the battery soon.
See Chapter 1 â9. Changing the Batteryâ.
[Replace battery]
Battery power is low. Replace the
battery immediately. See Chapter
1 â9. Changing the Batteryâ. If you
press the ON/OFF button after
discharging of the battery, the
battery icon will flash and then
after ten seconds the meter will
turn off automatically.
[HI message]
Blood glucose may be higher than
the measuring range of the system.
See chapter 3 â4. Understanding
Test Resultsâ.
Maintenance and Troubleshooting
t
59
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG\`
YWXZTW[TX]GGGăä¸G\a\`aWW
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
t
Maintenance and Troubleshooting
t
t
[Lo message]
Blood glucose may be lower than
the measuring range of the system.
See chapter 3 â4. Understanding
Test Resultsâ.
[Internal Error Message for a meter]
Turn off a meter. Then turn on
the meter again. If there is still
error message, please contact SD
Biosensor, Inc. TEL: +82-31-300-0400.
[Strip Error]
Defective test strip or the test strip is damaged or
inserted improperly. Discard this test
strip and test again using new test
strip. See Chapter 3 â2. Performing a
Blood Glucose Testâ.
60
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG]W
YWXZTW[TX]GGGăä¸G\a\`aWW
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
t
t
[Blood Sample Error]
An insufficient amount of blood was
applied. Discard this test strip and test
again using new test strip and a larger
sample, making sure blood is placed
to the narrow channel in the top edge
of the test strip. See Chapter 3 â2.
Performing a Blood Glucose Testâ.
[Temperature Error]
If the environmental temperature is
above or below the operating range
of a meter, a thermometer icon will
appear on the display. Move to an
area between 8-45°C (46-113°F),
wait for 30 minutes, and perform a
test. Do not artificially heat or cool
the meter. See Chapter 6. âProduct
Technical Informationâ.
[Communication Error]
The communication between meter
and computer is failed. Connect
again between meter and PC.
Maintenance and Troubleshooting
t
61
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG]X
YWXZTW[TX]GGGăä¸G\a\`aWW
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
6. Warnings, Precautions and Limitations
t
t
t
Maintenance and Troubleshooting
t
t
t
Never make significant changes to your diabetes
control program or ignore physical symptom without
consulting with your healthcare professional.
Severe dehydration (excessive water loss) may cause
false low results. If you believe you are suffering from
dehydration, consult your healthcare professional
right away.
Extremes in hematocrit may affect test results.
Hematocrit levels less than 20% may cause falsely high
readings. Hematocrit levels greater than 60% may
cause falsely low readings.
Inaccurate results may occur in severely hypotensive
individuals or patients in shock. Inaccurate low
results may occur for individuals experiencing a
hyperglycemic-hyperosmolar state, with or without
ketosis. Critically ill patients should not be tested with
blood glucose meters.
Normal endogenous (within body) natural levels
of uric acid, ascorbic acid (vitamin C), bilirubin,
triglycerides, and hemoglobin do not interfere with
your blood glucose results obtained.
Interferences : The following compounds, elevated
levels of ascorbic acid, uric acid, acetaminophen, total
bilirubin, triglycerides may affect results.
Compound
Limitation
Ascorbic acid
> 4 mg/dL
Uric acid
> 9 mg/dL
Acetaminophen
> 6 mg/dL
Total bilirubin
> 40 mg/dL
Triglycerides
> 1026 mg/dL
62
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG]Y
YWXZTW[TX]GGGăä¸G\a\`aWW
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
t
t
Maintenance and Troubleshooting
t
Do not use during or soon after xylose absorption
testing. Xylose in the blood will cause an interference.
SD GlucoNaviiÂŽ Mentor NFC System is not designed
to be a substitute for pathology laboratory equipment
and should not be used for the diagnosis of diabetes.
Do not use SD GlucoNaviiÂŽ Mentor NFC meter to test
neonates. It has not been validated for neonatal use.
63
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG]Z
YWXZTW[TX]GGGăä¸G\a\`aWW
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
CHAPTER 7 :
Product Technical Information
1. System Specifications
Result Range
10 - 600 mg/dL,
(0.6 - 33.3 mmol/L)
Calibration
Plasma-equivalent
Sample
Fresh capillary whole blood
Sample Size
0.3 microliter
Test Time
5 seconds
Product Technical Information
Assay
Method
ON/OFF
Source
Glucose Oxidase Biosensor
Battery type CR2032
Battery Life
Around 1,000 tests
Glucose Unit
mg/dL , mmol/L
Display
LCD (Customized)
Controls
3 Buttons
Size
50mm Ă93 mm Ă18 mm
Weight
50g (with battery)
t
Automatic
Shutoff
t
1 minutes after last user action
without inserting test strip into the
meter
3 minutes after last user action when
inserting test strip into the meter
64
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG][
YWXZTW[TX]GGGăä¸G\a\`aWW
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
Memory
300 blood glucose tests
Function
- Hypo warning : 60, 70, 80 mg/dL(3.3, 3.9,
4.4 mmol/L)
- Pre-meal and post-meal mark
- Alarm setting (up to 4 times)
- Post-meal Alarm
- 7-, 14- and 30-day Averages of the
following results
1)Normal Results
2)Pre-meal Results
3)Post-meal Results
- Automatic shutoff
Operation
Temperature
10 - 45°C (48 - 113°F)
Hematocrit
20~60%
Altitude
Up to 12,388 feet. (3,776 meters)
- Test strip
Storage
Temperature
2°C â 32°C (36°F â 90°F)
Product Technical Information
- System
65
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG]\
YWXZTW[TX]GGGăä¸G\a\`aWW
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
Annex 1 : Information for Healthcare Professionals
Product Technical Information
Healthcare professionals : Follow the infection control
procedures appropriate for your facility.
Decisions about whether to recommend alternative site
testing (AST) should take into account the motivation and
knowledge level of the patient and his or her ability to
understand the considerations relative to diabetes and
AST. If you are considering recommending AST for your
patients, you need to understand that there is a potential
for a significant difference between fingertip and alternative
site blood glucose test results. The difference in capillary
bed concentration and blood perfusion throughout the
body can lead to sample site-to-site differences in glucose
results. These physiological effects vary between individuals
and can vary within a single individual based upon his or
her behavior and relative physical condition. Our studies
involving AST of adults with diabetes show that most
persons will find their glucose level changes more quickly in
the fingersâ blood than the alternative sitesâ blood.
This is especially important when glucose levels are falling
or rising rapidly. If your patient is used to making treatment
decisions based upon fingertip readings, he or she should
consider the delay or lag-time, affecting the reading
obtained from an alternative site.
66
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG]]
YWXZTW[TX]GGGăä¸G\a\`aWW
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
Annex 2 : Symbol
The following list describes all symbols used on SD
GlucoNaviiÂŽ Mentor NFC Blood glucose monitoring (BGM)
system.
Symbol
Description
Caution, consult accompanying
documents
Battery type used in this meter
Crossed out wheeled bin: To discard it
separately from other household waste
In-vitro diagnostic medical device:
This system is intended to use outside the
body (in vitro diagnostic use).
Serial number for this meter.
Date of manufacture :
To indicate the date of manufacture for this
meter
Product Technical Information
Consult instructions for use
67
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG]^
YWXZTW[TX]GGGăä¸G\a\`aWW
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
Symbol
Description
Lot No. or Batch Code
To indicate the lot number for this
system
Expiry date:
This system should be used by the
given date.
To indicate the temperature
limitations in which the transport
package has to be kept and handled
Catalogue number:
To indicate the catalogue number for this
system
To indicate the manufacturer
Product Technical Information
$POUBJOT4VĂłDJFOUGPSO5FTUT
To use for 6 months after first opening the
container.
DO NOT REUSE:
To warn the user of a piece of
equipment that it is for single use
only and that it must not therefore be used
more than once
68
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG]_
YWXZTW[TX]GGGăä¸G\a\`aWX
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
Annex 3 : References
1.
2.
Product Technical Information
3.
American Diabetes Association, Clinical Practice
Recommendation Guidelines 2003, Diabetes care, Vol.
26. Supplement 1. p.22
Stedman, TL. Stedmanâs Medical Dictionary, 27th
Edition, 1999, p. 2082.
Ellen T. Chen, James H. Nichols, Show-Hong Duh, Glen
Hortin, MD: Diabetes Technology & Therapeutics,
Performance Evaluation of Blood Glucose Monitoring
Devices, Oct 2003, Vol. 5, No. 5 : 749 -768
69
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG]`
YWXZTW[TX]GGGăä¸G\a\`aWX
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
Return
You must contact SD Biosensor Customer Service at +8231-300-0400 before returning your meter. You will be
instructed how to return the meter to SD Biosensor, Inc.
Returned meters without this authorization will not be
accepted.
Product Technical Information
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
70
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG^W
YWXZTW[TX]GGGăä¸G\a\`aWX
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
Manufactured by
SD BIOSENSOR, Inc.
C-4th&5th Floor Digital Empire Building 980-3,
Yeongtong-dong, Yeongtong-gu, Suwon-si,
Kyonggi-do, Korea
Product Technical Information
EC-Representative
71
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG^X
YWXZTW[TX]GGGăä¸G\a\`aWX
SD GlucoNaviiÂŽ Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
Product Technical Information
MEMO
72
nÂÂÂÂuÂÂÂÂGtÂÂÂÂÂGumjÂ|ÂÂÂGÂÂÂÂÂÂÂÂÂÂYWXZW[X]ÂZUÂÂÂÂGGG^Y
YWXZTW[TX]GGGăä¸G\a\`aWX
FCC ID-RPJ01GM24
0168
0123
L21MVN1ENR0
Issue date: 2013.04
01GM24/01GC24 series
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.4
Linearized : No
Page Count : 74
XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6
About : a77a9887-d5a9-11e2-0000-a8fa920cd153
Producer : GPL Ghostscript 9.0
Keywords : ()
Modify Date : 2013:06:12 11:51:39+01:00
Create Date : 2013:06:12 11:51:39+01:00
Creator Tool : PDFCreator Version 1.2.0
Document ID : a77a9887-d5a9-11e2-0000-a8fa920cd153
Format : application/pdf
Title : [GM24]GlucoNavii Mentor NFC_User manual_F[BW].pdf
Creator : twyna-to
Description : ()
Author : twyna-to
Subject :
EXIF Metadata provided by EXIF.tools