SDI Technologies IBT372 Waterproof & Shockproof Wireless Stereo Speaker User Manual iBT373 QSG

SDI Technologies Inc. Waterproof & Shockproof Wireless Stereo Speaker iBT373 QSG

Contents

User Manual-2

QUICK START GUIDEContact Us: 1•800•288 • 2792For full waranty and full instructions visit: www.ihome.com/supportSpeakerphone» The speaker must be on and connected with a paired Bluetooth device to recieve calls» When a call is received, playing music is muted to hear the ring tone. Press the        Bluetooth/Speakerphone Button to answer call. For call waiting function, use    phone controls on your device. » Press the     Bluetooth/Speakerphone Button again to end call and resume previous function.iBT373FCC ID: EMOIBT372IC: 986B-IBT372FCC InformationThis device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.•  Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.•  NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:•  Reorient or relocate the receiving antenna.•  Increase the separation between the equipment and receiver.•  Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.•  Consult the dealer or an experienced radio/TV technician for help.CAN ICES-3 (B)/NMB-3(B)Canada StatementThis device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation       of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage; (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage       est susceptible d’en compromettre le fonctionnement.The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.le dispositif a été évalué à satisfaire l'exigence générale de l'exposition aux rf.l'appareil peut être utilisé dans des conditions d'exposition portatif sans restriction.iBT373-170105-A (EN)  Printed in ChinaQUICK START GUIDE CHARGE UNIT BEFOREUSE - ABOUT 5  HOURSIn the Box » iBT373 speaker        » USB charging cable        » Carry Strap» Connect the micro-USB plug on the included charging    cable to the USB Charging jack on the speaker.» USB AC adaptor (not included)Contact Us: 1•800•288 • 2792Color Changing Modes» Press and hold the Power Button for 2 seconds to power on iBT373» Press the       Color Mode Button to cycle through these modes:   Slow Fade  Fast Change  Favorite Color    Pulse to Music      Preset Pulsing     OFor full waranty and full instructions visit: www.ihome.com/supportiBT373 QSGSize: 280W x 160H (mm)Folded size:  140W x 160Hmaterial:  260gsm2 art card, 2C + 1CDate:  Jan 10, 2016FRONTBACKThis device uses an internal non-replaceable rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it for an extended period of time and try resetting the unit. If this fails, contact Customer Service at 1-800-288-2792. WARNING/DISPOSAL OF UNITDo NOT attempt to change the battery. Doing so will void the warranty and could cause injury and damage to your device.To dispose of the unit, follow the instructions below:• Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances. • Always dispose of used batteries/electronics in accordance with the prevailing community regulations. • Many electronics retailers now recycle batteries and other electronic components at no charge.GENERAL BATTERY PRECAUTIONS• Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal.• Never disassemble the unit or attempt to remove battery as that could cause leakage of   alkaline solution or other electrolytic substances.• Avoid charging a rechargeable battery when the temperature is not within 5°C - 35° C (41° - 95° Fahrenheit).• Never expose a battery to any liquid.• Never expose a battery to excessive heat such as direct sunlight or fire. Never use a battery pack in an unventilated vehicle where excessive internal temperatures may be encountered.• Always keep batteries out of the reach of infants and small children.Internal Rechargeable Lithium-ion Battery Aux-In Waterproof Operation» To play aux audio, connect a standard audio cable (not included) to the headphone jack    of your audio device and connect the other end to the aux-in jack on iBT373. » Press and hold the      Power Button for 2 seconds on the unit to turn it on.» Power on the aux audio device and use the controls on the device to play or pause audio, and to    navigate tracks. Make sure to pause any connected Bluetooth device to hear aux audio. » Press the     or       buttons to adjust the system volume. You can also adjust volume on your device.Charging Status indicator Solid red = charging   Red LED o = fully charged  Flashing red = low batteryBluetooth: Pairing & Playing» Make your device “discoverable” by turning on Bluetooth mode» Press and hold the Power Button for 2 seconds to power on iBT373» Select “iHome iBT372” on your device’s Bluetooth    menu to complete pairing» Press the Play/Pause Button to play and pause audio from    your Bluetooth device. Navigate tracks from your device.» Use the     and      buttons to control iBT373 volume» The first time the unit is powered    on it will enter auto-pairing mode» Power on speaker» Press and hold the    Bluetooth/  Speakerphone Button for 2 secondsPairing the First Time Manual PairingiHome iBT373-OR-» For proper waterproof operation, make sure the waterproof cover on the right side of the unit is    completely flush with the unit by pressing along the entire edge of the cover until it is completely    and securely in place.Voice Commands » NOTE: The unit must be powered on and linked to a Bluetooth phone to use voice commands. » Press and hold the     Play/Pause/Voice Command Button to access the voice command protocol    associated with your device’s operating system (Siri for iOS devices, “OK, Google” for Android    devices, etc.)PMS7469CModel: iBT373Color Changing RechargeableBluetooth Speaker with SpeakerphoneModel: iBT373Color Changing RechargeableBluetooth Speaker with SpeakerphonewatertightnotwatertightConnect USB cable to USB port and the other end to your device to charge.

Navigation menu