SDI Technologies IHC5 BLUETOOTH CELLPHONE CLOCK RADIO DOCK User Manual users manual

SDI Technologies Inc. BLUETOOTH CELLPHONE CLOCK RADIO DOCK users manual

users manual

User ManualiHC-5Bluetooth Cellphone Clock Radio Dock
IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user authority to operate the device. FCC Regulations: zThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. zThis device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
User ManualiHC-5Bluetooth Cellphone Clock Radio Dock67#8 901ABC DEFMNOJKLGHIWXYZTUVOPERPRS2 34 5time zoneclock adj.line outline in1100mA-1 +1dstsnooze/dimmervol.setansweron/offalm resetsleep radioam fm1 fm2alm 1 alm 2power alm on/off1 2 3 4presetsbuzzerradio1
Daylight Savings Time:Forward / ReverseDaylight Savings Time (also called DST, or Summer Time) is the portion of the year in which a region’s local time is advance (usually) by one hour from its standard official tim e.When slide is set to “+1” position, dst icon(SUN) will be displ ayed. Forward time by one hour.When slide is set to “-1” position, Set time back one hour.*default position is -1 positionPressing FWD/REV while POWER is off does nothing.Pressing FWD/REV in CLOCK ADJUST mode, changes time 1 minute per touchPressing and holding FWD/REV in CLOCK ADJUST mode, changes time 10 minutes per second.Pressing FWD/REV in RADIO mode, tunes radio Xhz/Xmhz per touch.Pressing and holding FWD/REV in RADIO mode scans radio forward/reverse.Pressing FWD/REV in Bluetooth mode (with connected device using A2DP and AVRCP profile) when device is playing, will go to the next/previous track.Pressing and holding FWD/REV in Bluetooth mode (with connected device using A2DP and AVRCP profile) when device is playing, will scan withing the currently playing track.time zoneclock adj.line outline in1100mA-1 +1dstbuzzerradioUser ManualiHC-5Bluetooth Cellphone Clock Radio Dock2
Press and hold for 2 sec.Setting the TimeDST adjustment*this product is factory preset*Default position is at -1.When slide is at “+1” position, forward time by one hour.Reverse by one hour when turned to “-1” position.Currently set time isshown. Current TimeZone is flashing.Time Zone loops as SetButtons are pressed. Timechanges to reflect Time Zone. If no button pressedfor 10 seconds, changesare set and 2 BEEPSZone 1 - “Atlantic”Zone 2 - “Eastern”Zone 3 - “Central”Zone 4 - “Mountain”Zone 5 - “Pacific”Zone 6 - “Alaska”Zone 7 - “Hawaii”Defualt is Zone 2 (eastern)Time Zone Set mode exits.Press or-1 +1dsttime zone Press2 BEEPStime zone-1 +1dstUser ManualiHC-5Bluetooth Cellphone Clock Radio Dock3
Tap (momentary) to adjust1 minute increment at a time.Press & hold 1 sec. to adjust 10 minute inc rementsper 1 second.Press and hold for 2 sec.Setting the Time(Including Year, Date, Month): This step would onle be required when auto set time is lost.If no button pressed for 10 seconds, changesare set and CLOCK ADJexits.2 BEEPSCurrently Set TIme isFlashing. Default is 12:00 PMCurrently set yearappears, flashing.Year loops from Y05 toY99. If no button/knobis pressed for 10seconds, changes areset and CLOCK ADJUSTexits.2 BEEPSPress orclock adj.Pressclock adj.Press orUser ManualiHC-5Bluetooth Cellphone Clock Radio Dock4
and hold for 2 sec.Setting Alarm 1 or 2Currently set dateappears, flashing.Currently set Alarm Time 1and wake-to setting appears, flashing.ALM 1 will wake-to Radio -or- connected Bluetooth Device.Default alm time is 6:00amand preset 1 FM1.Currently set Alarm Time 2and wake-to settingappears, flashing.ALM 2 will wake-to Buzzer. Default alm time is 7:00am.CLOCK ADJUST mode exits2 BEEPS-or-Year loops from Y2005 toY2099. If no button/knobis pressed for 10seconds, changes areset and CLOCK ADJUSTexits.2 BEEPSPressclock adj.PressPressclock adj.Press oralm 1alm 2radiobuzzerUser ManualiHC-5Bluetooth Cellphone Clock Radio Dock45
Press orWake-to selection (at any point during ALM 1 set)2 BEEPSor-or-Press alm 1alm 2If no button pressed in 10 seconds, changes areset and ALARM SETmode exits. Alarm Time is set andAlarm mode exits. Alarm will auto-arm.• Radio Station Selection (only in ALM 1 set)* Default is wake-to setting is RADIOPressing will continuously cycle through AM, FM1, a nd FM2.Select desired wake-to station using presetsmanually select wake-to station by pressing - OR -radioam fm1 fm2 1 2 3 4radioradioradio radio radioUser ManualiHC-5Bluetooth Cellphone Clock Radio Dock6
Turning Alarms on/offalarm 1 on.alarm 2 on.alarm 1 and alarm 2 on.alarm 1 and alarm 2 off.• Bluetooth (ALM 1 only)Press select wake-to connected Bluetooth Devi ce.Press RADIO or any preset to switch wake-to selection from Blue tooth to RADIO.IF, when Bluetooth Alarm is sounding, and no sound is detected after 20 sec. the alarm will switch to buzzer.Pressing repeatedly wil cycle through the foll owing states:alm on/offradiobuzzerbuzzerradioUser ManualiHC-5Bluetooth Cellphone Clock Radio Dock7
Volume is shown onbottom right of screenvolume goes from 0 to40. If Volume buttons arenot touched for 2 seconds,display returns to previousTo preview the alarmWhen Alarm is soundingAdjusting Volume (only when in Bluetooth/Radio/Aux mode)PressAlarm Time and icon stays for 5 seconds and reverts to normal d isplayWhen alarm is sounding, either the alarm 1 or alarm 2 icon will flasn. Alarm will sound for 60 minutes unless stopped.When alarm is sounding, pressing ALARM ON/OFF will turn off Alarm.When alarm is sounding, pressing ALARM RESET will turn off Alarm and reset for next day.When alarm is sounding, pressing will activate Bluetoot h, pressing RADIO will activate radio.Wake-to source sound (bluetooth, radio, piezo buzzer) will use gradual wake (valume ramping). Sound will gradually increase over a duration of 30 seconds to the set volume level.NOTE: If Alarm 1 in the wake-to bluetooth mode is the sounding alarm, and when alarm sounds, the product detects no sound for 20 seconds, then last radio wake-to selection will sound instead and Bluetooth will power off.Note: Piezo buzzer uses 100% piezo volume. Confirmation beep s use 30% piezo volume. -or-alm 1alm 2Press or-Pressing and holding vol. - or + will adjust volume 5 incremen ts per 1 second.radioradioradiobuzzerradioUser ManualiHC-5Bluetooth Cellphone Clock Radio Dock8
RadioorPressing will continuously cycle through AM, FM1, a nd FM2.Press• Selecting a station• Accessing a radio preset• Setting a radio presetWhile in any mode, pressing any Preset button will call up that Preset. Presets are numbered 1-4. Thereare 4 presets for FM1, 4 presets for FM2, and 4 presets for AM.Preset number will be displayed on LCD along with frequency.Pressing and holding a preset (1-4) for 2 seconds will assign w hatever station was being accessed to thatspecific Preset Key. 1 Confirm Beepradioam fm1 fm2 12 3 4Power alm resetpowerAUTO PAIRING- Press POWER to turn on the unit, the unit is in pairing mode.- Activate the bluetooth option on mobile phone according to th e owner's manual, entering the pass key to establish a pairing connection.- Bluetooth icon flicks to show the unit is in process of pairi ng.- Once connected, the bluetooth icon will remain on (one beep c onfirm, pairing is successful)- If the pairing can not be established within 60 seconds, the display returns to flick repeating pairing procedure if a mobile phone is adjacent to the unit.- If no mobile phone is put in the service range, the display w ill disappear and change operation to be pairing standby mode.User ManualiHC-5Bluetooth Cellphone Clock Radio Dock9
time zoneclock adj.line outline in1100mA-1 +1dst-Pressing POWER when unit is off goes to either Radio or Blueto oth mode, whichever was last used.-User can turn Radio off when in Radio mode by pressing POWER.-User can turn Bluetooth off when in Bluetooth mode by pressing POWER.Note: alm reset only functions when alarm is sounding. -Line in (Auxiliary) works when unit is in Bluetooth mode, in p aralell with both Connected Bluetooth device. If the UNIT is in Bluetooth mode, and both an a Auxili ary audio device / phone is connected and playing through the line-in and a Bluetooth Connected phone , BOTH will be heard.NOTE: Include 2 Patch Cords. 1) Standard 3.5mm-3.5mm Auxiliary patch cord. 2) Custom 2.5mm-3.5mm mobile in patch cord. (should enable stereo sound and microphone for speaker phone)-Certain Phones connected through the Mobile in can be used wit h the integrated speaker phone.-When a compatible phone is connected correctly, pressing will answer incoming calls.-Press again to END call. Speaker phone icon will tu rn off.Power continued...Line in (3.5mm jack)answeron/offansweron/offSpeaker phone icon will showUser ManualiHC-5Bluetooth Cellphone Clock Radio Dock10
-Pressing SNOOZE bar while alarm is sounding will stop the alarm from sounding for 9 minutes.-While in snooze mode, alarm icon will flash. Can be used several time during 1 hour alarm period.SnoozePressing “snooze bar” repeatedly will cycle through:1) High2) Medium3) Low4) OffDimmer (when alarm is not sounding)When AC power is unavailable (blackout), alarm will automatically use piezo as wake to. All Clock/Alarm settings will still work (with 2 AA batteries).-While unit is off: Pressing SLEEP while unit is off will acti vate sleep in either Radio or Bluetooth mode (whichever was last used), sleep time w ill be shown on display (i.ei: 120 minutes)-While unit is already palying Radio or Bluetooth: Pressing SL EEP while unit is already playing shows sleep time on display (i.ei: 120 minute s)-While unit is already in SLEEP mode: Pressing SLEEP while unit is in sleep mode will show the amount of sleep time remaining, pressing again wi ll change sleep time to the next lower increment (if at 112 min, it will go to 90, 6 0, 30, 15 min, Power off).NOTE: Changing volume while in sleep mode will not affect Norma l Volume orWake-to Volume. Next time sleep mode is used, last used sleep colume is maintained. Sure AlarmThe Line Out can be used in any mode, and provides and unamplif ied stereo signal throught therear 3.5 mm jack.Line OutSleep Function (sleep can work in any mode)alarm icon will flashPress sleepPressing SLEEP repeatedly cycles between the following durations: 120, 90, 60, 30, 15 min, OFF. During the last 15 seconds of SLEEP mode, the volume will gradually decrease. If SLEEP button is not pressed for 10 seconds display goes back to showing current time.buzzerradioradioUser ManualiHC-5Bluetooth Cellphone Clock Radio Dock11
Interfacing with a Mobile Phone*Depends on capabilities of each individual handsetI. Hardwired 1. Listening to Music 2. Phone calls Auxilary Mode: (Line-in)Auxilary Mode: (mobile in)NOTE: MP3 phone or other Auxilary device must be manually acti vated. Both line in’s (‘mobile in’ and ‘AUX’) will sound at the same time; It is up to the user to manually c ontrol the external devices.*Unit is powered ‘ON’ in ‘Bluetooth’ mode, Bluetooth device is NOT connected. *Depends on handset, may be necessary to manually answer call d irectly on phone.Connect Phone or MP3 player using the appropriate patch cordPressing repeatedly will switch between ‘Pla y’ and ‘Mute’.PLAY MUTEPress to answer an incoming call and talk using int ergrated microphone.answeron/offPress to end a phone call.answeron/offSpeaker Phone icon will showwhen using speaker phoneMobile In, AUX, and Bluetooth are connected in paralell. time zoneclock adj.line outline in1100mA-1 +1dstUser ManualiHC-5Bluetooth Cellphone Clock Radio Dock12
AUTO PAIRING- Press to turn on the unit, the unit is in pairing mode.- Activate the bluetooth option on mobile phone according to the owner's manual, entering the pass key to establish a pairing connection.- Bluetooth icon flicks to show the unit is in process of pairing.- Once connected, the bluetooth icon will remain on (one beep confirm, pairing is successful)- If the pairing can not be established within 60 seconds, the display returns to flick repeating pairing procedure if a mobile phone is adjacent to the unit.- If no mobile phone is put in the service range, the display will disappear and change operation to be pairing standby mode.-Cellphone will always be the top priority, since and incoming/outgoing has been progressed, interrupts actively and the on-going music will be muted and ring. As soon as the call has been ended, the music will rebound afterward. -Press to play/pause mobile phone’s integrated media player.* Supports Headset, HFP, A2DP, and AVRCP profiles. * Handset is connected, supports A2DP profile, and is in Media Player mode.NOTE: Select “Silence” on phone to turn off integrated speakers on mobile phone.II. Bluetooth (1.2 class 2) 1. Pairing your Bluetooth devices 2. Streaming Music 3. Mobile Phone OperationPress to answer an incoming call and talk using intergrated microphone.answeron/offPress to end a phone call.answeron/offalm resetpowerincoming callUser ManualiHC-5Bluetooth Cellphone Clock Radio Dock13
* POWER is on in Bluetooth mode* POWER is on in RADIO mode* POWER is OFFPairingDuring CommunicationPlaying Music (play)Playing Music (paused)Bluetooth Connected and StandbyStandby withoutConnected (AUX)Bluetooth Connected(RADIO Mode)-Dial/Voice DialingPress to activate Dial/Voice Dialing on connected h andset.Press to place call.Say preprogramed voice command OR, Dial number using integrated keypad.answeron/offansweron/offPress to end call.answeron/off*tone will sound for each numberon keypad.RADIO(Bluetooth Connected)Power OFF(Bluetooth Connected)Power OFF(without Connected)User ManualiHC-5Bluetooth Cellphone Clock Radio Dock14
Auto Pairing Standbypress + hold6 secondspress + hold2 secondspress + hold2 secondspress + hold2 secondspress twice(within .5 sec)press (less than 1 sec)press (less than 1 sec)press (less than 1 sec)press (less than 1 sec)press (less than 1 sec)press (less than 1 sec)press (less than 1 sec)press (less than 1 sec)press (less than 1 sec)press (less than 1 sec)press (less than 1 sec)press (less than 1 sec)Cancel Pairing During PairingAnswer Call Incoming Call (ringing)End Call During CommunicationDialing/Voice Dialing StandbyRefuse Dialing Incomming Call (ringing)Last Call Redial StandbySwitch to Handset During CommunicationCancel Voice Dialing During Voice DialingVolume Up During CommunicationVolume Down During CommunicationConnect to Handset DisconnectedPlay Stop or PausePause PlayingStop PlayingTrack Forward PlayingTrack Backward PlayingFeature Button Operation ConditionspowerpowerUser ManualiHC-5Bluetooth Cellphone Clock Radio Dock15
RemotesnoozemutemodepresetssnoozemuteradiopresetsPressing VOL. - / + will funcion same as on main unit.Pressing MUTE will toggle the sound on & off.“Mute” will appear on display. Press any key to exit MUTE.Pressing FWD/REV will function same as on main unit.Pressing SPKR PHONE will function same as on main unit.Note: cannot program presets from the remote.Pressing PRESETS bubtton when unit is in either Bluetoothor Radio mode will automatically go to the last accessedPreset Radio Station on last used BAND (AM, FM1, or FM2). Pressing PRESETS again while already listening to a station in Preset memory will go to the next Preset station programmed.Pressing RADIO will function same as on main unit.Pressing SNOOZE will function same as on main unit.Pressing PLAY/PAUSE will function same as on main unit.Pressing POWER/alm reset will function same as on main unit.radioUser ManualiHC-5Bluetooth Cellphone Clock Radio Dock16

Navigation menu