SDI Technologies IHC5 BLUETOOTH CELLPHONE CLOCK RADIO DOCK User Manual users manual

SDI Technologies Inc. BLUETOOTH CELLPHONE CLOCK RADIO DOCK users manual

users manual

User Manual
iHC-5
Bluetooth Cellphone Clock Radio Dock
IMPORTANT NOTE: To comply with the FCC RF exposure compliance
requirements, no change to the antenna or the device is permitted. Any change to
the antenna or the device could result in the device exceeding the RF exposure
requirements and void user authority to operate the device.
FCC Regulations:
zThis device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
zThis device has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiated radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user‘s authority to operate the equipment.
User Manual
iHC-5
Bluetooth Cellphone Clock Radio Dock
6
7
#
8 9
0
1ABC DEF
MNO
JKLGHI
WXYZ
TUV
OPER
PRS
2 3
4 5
time zoneclock adj.
line outline in
1100mA
-1 +1
dst
snooze/dimmer
vol.set
answer
on/off
alm reset
sleep radio
am fm1 fm2
alm 1 alm 2
power alm on/off
1 2 3 4
presets
buzzer
radio
1
Daylight Savings Time:
Forward / Reverse
Daylight Savings Time (also called DST, or Summer Time) is the portion of the year in which a region’s local time
is advance (usually) by one hour from its standard official tim e.
When slide is set to “+1” position, dst icon(SUN) will be displ ayed. Forward time by one hour.
When slide is set to “-1” position, Set time back one hour.
*default position is -1 position
Pressing FWD/REV while POWER is off does nothing.
Pressing FWD/REV in CLOCK ADJUST mode, changes time 1 minute per touch
Pressing and holding FWD/REV in CLOCK ADJUST mode, changes time 10 minutes per second.
Pressing FWD/REV in RADIO mode, tunes radio Xhz/Xmhz per touch.
Pressing and holding FWD/REV in RADIO mode scans radio forward/reverse.
Pressing FWD/REV in Bluetooth mode (with connected device using A2DP and AVRCP profile) when device is playing,
will go to the next/previous track.
Pressing and holding FWD/REV in Bluetooth mode (with connected device using A2DP and AVRCP profile) when
device is playing, will scan withing the currently playing track.
time zone
clock adj.
line out
line in
1100mA
-1 +1
dst
buzzer
radio
User Manual
iHC-5
Bluetooth Cellphone Clock Radio Dock
2
Press
and hold for 2 sec.
Setting the Time
DST adjustment
*this product is factory preset
*Default position is at -1.
When slide is at “+1” position, forward time by one hour.
Reverse by one hour when turned to “-1” position.
Currently set time is
shown. Current Time
Zone is flashing.
Time Zone loops as Set
Buttons are pressed. Time
changes to reflect Time
Zone. If no button pressed
for 10 seconds, changes
are set and 2 BEEPS
Zone 1 - “Atlantic”
Zone 2 - “Eastern”
Zone 3 - “Central”
Zone 4 - “Mountain”
Zone 5 - “Pacific”
Zone 6 - “Alaska”
Zone 7 - “Hawaii”
Defualt is Zone 2 (eastern)
Time Zone Set mode exits.
Press or
-1 +1
dst
time zone
Press
2 BEEPS
time zone
-1 +1
dst
User Manual
iHC-5
Bluetooth Cellphone Clock Radio Dock
3
Tap (momentary) to adjust
1 minute increment at a time.
Press & hold 1 sec. to
adjust 10 minute inc rements
per 1 second.
Press
and hold for 2 sec.
Setting the Time
(Including Year, Date, Month): This step would onle be required when auto set time is lost.
If no button pressed for
10 seconds, changes
are set and CLOCK ADJ
exits.
2 BEEPS
Currently Set TIme is
Flashing. Default is
12:00 PM
Currently set year
appears, flashing.
Year loops from Y05 to
Y99. If no button/knob
is pressed for 10
seconds, changes are
set and CLOCK ADJUST
exits.
2 BEEPS
Press or
clock adj.
Press
clock adj.
Press or
User Manual
iHC-5
Bluetooth Cellphone Clock Radio Dock
4
and hold for 2 sec.
Setting Alarm 1 or 2
Currently set date
appears, flashing.
Currently set Alarm Time 1
and wake-to setting
appears, flashing.
ALM 1 will wake-to
Radio -or- connected
Bluetooth Device.
Default alm time is 6:00am
and preset 1 FM1.
Currently set Alarm Time 2
and wake-to setting
appears, flashing.
ALM 2 will wake-to Buzzer.
Default alm time is 7:00am.
CLOCK ADJUST mode exits
2 BEEPS
-or-
Year loops from Y2005 to
Y2099. If no button/knob
is pressed for 10
seconds, changes are
set and CLOCK ADJUST
exits.
2 BEEPS
Press
clock adj.
Press
Press
clock adj.
Press or
alm 1
alm 2
radio
buzzer
User Manual
iHC-5
Bluetooth Cellphone Clock Radio Dock
4
5
Press or
Wake-to selection (at any point during ALM 1 set)
2 BEEPS
or
-or-
Press alm 1
alm 2
If no button pressed in
10 seconds, changes are
set and ALARM SET
mode exits.
Alarm Time is set and
Alarm mode exits.
Alarm will auto-arm.
• Radio Station Selection (only in ALM 1 set)
* Default is wake-to setting is RADIO
Pressing will continuously cycle through AM, FM1, a nd FM2.
Select desired wake-to station using presets
manually select wake-to station by pressing
- OR -
radio
am fm1 fm2
1 2 3 4
radio
radio
radio radio radio
User Manual
iHC-5
Bluetooth Cellphone Clock Radio Dock
6
Turning Alarms on/off
alarm 1 on.
alarm 2 on.
alarm 1 and alarm 2 on.
alarm 1 and alarm 2 off.
• Bluetooth (ALM 1 only)
Press select wake-to connected Bluetooth Devi ce.
Press RADIO or any preset to switch wake-to selection from Blue tooth to RADIO.
IF, when Bluetooth Alarm is sounding, and no sound is detected after 20 sec. the
alarm will switch to buzzer.
Pressing repeatedly wil cycle through the foll owing states:
alm on/off
radio
buzzer
buzzer
radio
User Manual
iHC-5
Bluetooth Cellphone Clock Radio Dock
7
Volume is shown on
bottom right of screen
volume goes from 0 to
40. If Volume buttons are
not touched for 2 seconds,
display returns to previous
To preview the alarm
When Alarm is sounding
Adjusting Volume (only when in Bluetooth/Radio/Aux mode)
Press
Alarm Time and icon stays for 5 seconds and reverts to normal d isplay
When alarm is sounding, either the alarm 1 or alarm 2 icon will flasn. Alarm will sound for 60 minutes unless stopped.
When alarm is sounding, pressing ALARM ON/OFF will turn off Alarm.
When alarm is sounding, pressing ALARM RESET will turn off Alarm and reset for next day.
When alarm is sounding, pressing will activate Bluetoot h, pressing RADIO will activate radio.
Wake-to source sound (bluetooth, radio, piezo buzzer) will use gradual wake (valume ramping). Sound will gradually
increase over a duration of 30 seconds to the set volume level.
NOTE: If Alarm 1 in the wake-to bluetooth mode is the sounding alarm, and when alarm sounds, the product detects
no sound for 20 seconds, then last radio wake-to selection will sound instead and Bluetooth will power off.
Note: Piezo buzzer uses 100% piezo volume. Confirmation beep s use 30% piezo volume.
-or-
alm 1
alm 2
Press or
-Pressing and holding vol. - or + will adjust volume 5 incremen ts per 1 second.
radio
radio
radio
buzzer
radio
User Manual
iHC-5
Bluetooth Cellphone Clock Radio Dock
8
Radio
or
Pressing will continuously cycle through AM, FM1, a nd FM2.
Press
• Selecting a station
• Accessing a radio preset
• Setting a radio preset
While in any mode, pressing any Preset button will call up that Preset. Presets are numbered 1-4. There
are 4 presets for FM1, 4 presets for FM2, and 4 presets for AM.
Preset number will be displayed on LCD along with frequency.
Pressing and holding a preset (1-4) for 2 seconds will assign w hatever station was being accessed to that
specific Preset Key. 1 Confirm Beep
radio
am fm1 fm2
1
2 3 4
Power alm reset
power
AUTO PAIRING
- Press POWER to turn on the unit, the unit is in pairing mode.
- Activate the bluetooth option on mobile phone according to th e owner's manual, entering the pass
key to establish a pairing connection.
- Bluetooth icon flicks to show the unit is in process of pairi ng.
- Once connected, the bluetooth icon will remain on (one beep c onfirm, pairing is successful)
- If the pairing can not be established within 60 seconds, the display returns to flick repeating pairing
procedure if a mobile phone is adjacent to the unit.
- If no mobile phone is put in the service range, the display w ill disappear and change operation to
be pairing standby mode.
User Manual
iHC-5
Bluetooth Cellphone Clock Radio Dock
9
time zoneclock adj.
line outline in
1100mA
-1 +1
dst
-Pressing POWER when unit is off goes to either Radio or Blueto oth mode, whichever was last used.
-User can turn Radio off when in Radio mode by pressing POWER.
-User can turn Bluetooth off when in Bluetooth mode by pressing POWER.
Note: alm reset only functions when alarm is sounding.
-Line in (Auxiliary) works when unit is in Bluetooth mode, in p aralell with both Connected Bluetooth
device. If the UNIT is in Bluetooth mode, and both an a Auxili ary audio device / phone is connected
and playing through the line-in and a Bluetooth Connected phone , BOTH will be heard.
NOTE: Include 2 Patch Cords. 1) Standard 3.5mm-3.5mm Auxiliary patch cord.
2) Custom 2.5mm-3.5mm mobile in patch cord.
(should enable stereo sound and microphone for speaker phone)
-Certain Phones connected through the Mobile in can be used wit h the integrated speaker phone.
-When a compatible phone is connected correctly, pressing will answer incoming calls.
-Press again to END call. Speaker phone icon will tu rn off.
Power continued...
Line in (3.5mm jack)
answer
on/off
answer
on/off
Speaker phone icon will show
User Manual
iHC-5
Bluetooth Cellphone Clock Radio Dock
10
-Pressing SNOOZE bar while alarm is sounding will
stop the alarm from sounding for 9 minutes.
-While in snooze mode, alarm icon will flash. Can be
used several time during 1 hour alarm period.
Snooze
Pressing “snooze bar” repeatedly will cycle through:
1) High
2) Medium
3) Low
4) Off
Dimmer (when alarm is not sounding)
When AC power is unavailable (blackout), alarm will automatically use piezo as wake to.
All Clock/Alarm settings will still work (with 2 AA batteries).
-While unit is off: Pressing SLEEP while unit is off will acti vate sleep in either
Radio or Bluetooth mode (whichever was last used), sleep time w ill be
shown on display (i.ei: 120 minutes)
-While unit is already palying Radio or Bluetooth: Pressing SL EEP while unit is
already playing shows sleep time on display (i.ei: 120 minute s)
-While unit is already in SLEEP mode: Pressing SLEEP while unit is in sleep mode
will show the amount of sleep time remaining, pressing again wi ll change sleep time
to the next lower increment (if at 112 min, it will go to 90, 6 0, 30, 15 min, Power off).
NOTE: Changing volume while in sleep mode will not affect Norma l Volume or
Wake-to Volume. Next time sleep mode is used, last used sleep colume is maintained.
Sure Alarm
The Line Out can be used in any mode, and provides and unamplif ied stereo signal throught the
rear 3.5 mm jack.
Line Out
Sleep Function (sleep can work in any mode)
alarm icon will flash
Press sleep
Pressing SLEEP repeatedly cycles
between the following durations:
120, 90, 60, 30, 15 min, OFF.
During the last 15 seconds of
SLEEP mode, the volume will
gradually decrease.
If SLEEP button is not pressed
for 10 seconds display goes back
to showing current time.
buzzer
radio
radio
User Manual
iHC-5
Bluetooth Cellphone Clock Radio Dock
11
Interfacing with a Mobile Phone
*Depends on capabilities of each individual handset
I. Hardwired
1. Listening to Music
2. Phone calls
Auxilary Mode: (Line-in)
Auxilary Mode: (mobile in)
NOTE: MP3 phone or other Auxilary device must be manually acti vated. Both line in’s (‘mobile in’ and ‘AUX’)
will sound at the same time; It is up to the user to manually c ontrol the external devices.
*Unit is powered ‘ON’ in ‘Bluetooth’ mode, Bluetooth device is NOT connected.
*Depends on handset, may be necessary to manually answer call d irectly on phone.
Connect Phone or MP3 player using the appropriate patch cord
Pressing repeatedly will switch between ‘Pla y’ and ‘Mute’.
PLAY MUTE
Press to answer an incoming call and talk using int ergrated microphone.
answer
on/off
Press to end a phone call.
answer
on/off
Speaker Phone icon will show
when using speaker phone
Mobile In, AUX, and Bluetooth are connected in paralell.
time zoneclock adj.
line outline in
1100mA
-1 +1
dst
User Manual
iHC-5
Bluetooth Cellphone Clock Radio Dock
12
AUTO PAIRING
- Press to turn on the unit, the unit is in pairing mode.
- Activate the bluetooth option on mobile phone according to the owner's manual,
entering the pass key to establish a pairing connection.
- Bluetooth icon flicks to show the unit is in process of pairing.
- Once connected, the bluetooth icon will remain on (one beep confirm, pairing is successful)
- If the pairing can not be established within 60 seconds, the display returns to flick repeating
pairing procedure if a mobile phone is adjacent to the unit.
- If no mobile phone is put in the service range, the display will disappear and change
operation to be pairing standby mode.
-Cellphone will always be the top priority, since and incoming/outgoing has been progressed, interrupts actively and
the on-going music will be muted and ring. As soon as the call has been ended, the music will rebound afterward.
-Press to play/pause mobile phone’s integrated media player.
* Supports Headset, HFP, A2DP, and AVRCP profiles.
* Handset is connected, supports A2DP profile, and is in Media Player mode.
NOTE: Select “Silence” on phone to turn off integrated speakers on mobile phone.
II. Bluetooth (1.2 class 2)
1. Pairing your Bluetooth devices
2. Streaming Music
3. Mobile Phone Operation
Press to answer an incoming call and talk using intergrated microphone.
answer
on/off
Press to end a phone call.
answer
on/off
alm reset
power
incoming call
User Manual
iHC-5
Bluetooth Cellphone Clock Radio Dock
13
* POWER is on in Bluetooth mode
* POWER is on in RADIO mode
* POWER is OFF
Pairing
During Communication
Playing Music (play)
Playing Music (paused)
Bluetooth Connected
and Standby
Standby without
Connected (AUX)
Bluetooth Connected
(RADIO Mode)
-Dial/Voice Dialing
Press to activate Dial/Voice Dialing on connected h andset.
Press to place call.
Say preprogramed voice command OR, Dial number using integrated keypad.
answer
on/off
answer
on/off
Press to end call.
answer
on/off
*tone will sound for each number
on keypad.
RADIO
(Bluetooth Connected)
Power OFF
(Bluetooth Connected)
Power OFF
(without Connected)
User Manual
iHC-5
Bluetooth Cellphone Clock Radio Dock
14
Auto Pairing Standby
press + hold
6 seconds
press + hold
2 seconds
press + hold
2 seconds
press + hold
2 seconds
press twice
(within .5 sec)
press
(less than 1 sec)
press
(less than 1 sec)
press
(less than 1 sec)
press
(less than 1 sec)
press
(less than 1 sec)
press
(less than 1 sec)
press
(less than 1 sec)
press
(less than 1 sec)
press
(less than 1 sec)
press
(less than 1 sec)
press
(less than 1 sec)
press
(less than 1 sec)
Cancel Pairing During Pairing
Answer Call Incoming Call (ringing)
End Call During Communication
Dialing/Voice Dialing Standby
Refuse Dialing Incomming Call (ringing)
Last Call Redial Standby
Switch to Handset During Communication
Cancel Voice Dialing During Voice Dialing
Volume Up During Communication
Volume Down During Communication
Connect to Handset Disconnected
Play Stop or Pause
Pause Playing
Stop Playing
Track Forward Playing
Track Backward Playing
Feature Button Operation Conditions
power
power
User Manual
iHC-5
Bluetooth Cellphone Clock Radio Dock
15

Navigation menu