SDR Electronics 1129 Portable FM Transmitter User Manual itripseQS6

SDR Electronics Portable FM Transmitter itripseQS6

User Manual

2. Press + or – repeatedly   to set iTrip to match   that frequency. Press   and hold the + or – to   move through the   frequencies quickly.3. What are some of the best frequencies for   where you are or where you’re headed?   Visit Griffin's StationFinder   (http://stationfinder.griffintechnology.com/)   and get a list of of the best frequencies with   just a few clicks.106.9Select Stereo (LX) for:  listening to music  best separation between Right and LeftSelect Mono (DX) for:  listening to podcasts  talk radio  audio books  use in heavily populated areas where  numerous FM stations crowd the dial106.9Thank you for buying Griffin Technology’s iTrip®.Here’s how to get started.1. Connect iTrip to your iPod®.2. Press Play.3. Tune your FM radio to a clear frequency     (see p. 4).4. Use iTrip’s + and – buttons to tune iTrip     to the same frequency (see p. 5).5. That’s it. Enjoy.iTrip, adapters, and casesYou can use iTrip with many iPod casesfrom Griffin Technology by simply plugginginto the dock connector through the opening in the case.We’ve also included two dock connectorspacers for those times when you don’t usea case. Choose a spacer based on your iPodmodel, insert iTrip through the spacer hole,then snap into the dock connector.®®®TroubleshootingProblems? No problem. Check these tips for a quick fix:FM Radio  1. On?  2. Tuned to an unused frequency?  3. Radio volume adjusted?iPod   1. Hold switch off?   2. Play button depressed? Song not paused?   3. iPod battery completely drained? If so,     your iPod must recharge for a few short     minutes before iTrip senses your iPod.106.9106.9106.7 107.11106.9212Technical SpecificationsDimensions:  2.45" W x 1.43" T x 0.9" D    (62.5mm W x 36.5mm T x 22mm D)Weight: 0.6 oz (17g)Built-in antennaPower: no batteries required,       draws power from your iPodModulation: FM stereoFrequencies: 88.1 - 107.9 MHzHigh-stability crystal oscillator,       phase-lock loop control Frequency response: 50 Hz - 15 kHz Operation range: 10-30 ft (3m - 9.1m)Griffin stands behind every product with the industry’s best customer service,backed by a simple, fair warranty. Please read our warranty details atwww.griffintechnology.com/support/ before using this Griffin product.© 2007 Griffin Technology, Inc. • www.griffintechnology.com iTrip and PowerJolt are registered trademarks of Griffin Technology, Inc.iPod is a trademark of Apple Inc., registered in the U.S. and other countries.Patents pending • Made in China • Designed in Tennessee"Made for iPod" means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause Griffin Technology4052-TRPSEBundesired operation. The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.P/N Black & White:4052-TRPSEB4053-TRPSEWPlay1. On your FM radio, select  a frequency on which you   hear nothing but static.   The ideal choice would   have nothing on either   of the neighboring   frequencies, so listen   for 3 in a row with static   and select the middle   frequency. (Example -   you find that 106.7, 106.9   and 107.1 are unused  frequencies. Select 106.9.) Choose Stereo or Mono for best sound.Press and hold both + and – for 3 seconds. The current mode will begin to flash. Release the + and - .Press + or – to switch to the desired mode. Wait 2 seconds and your selection will automatically be saved.ConnectSelect one of the included dock connector spacers for the best fit between your iPod model and iTrip.1.  iPod classic (160 GB only),   iPod with video (5th generation,   60 GB, 80 GB only),   iPod with color display,   iPod photo (4th generation)2.  iPod touch, iPod classic (80 GB only).   iPod nano with video (3rd generation),    iPod with video (5th generation, 30 GB only)3. Or remove all spacers to use with  an iPod in a case.ChargeWe realize that if you use your iTrip a lot, you may want to charge your iPod at the same time. We’ve included a USB cable in the package for just that reason.1. Connect the mini USB end to the pass-  through port on the bottom of your iTrip.2. Connect the USB to a USB car charger   adapter (    such as our PowerJolt®,  available separately).3. iTrip will pass that power right along   to your iPod.Problem’s not solved?Call Griffin Technology’s Customer Support at 800-208-5996. Monday -Thursday 9 am – 6 pm and Friday, 9 am to 5 pm Central time.Your call will be answered by real human beings who actually know and use Griffin products.iTrip  1. Fully plugged in to your iPod dock    connector?   2. Has iTrip gone into low-power mode?     iTrip goes into a power-saving state    after an extended period of no music.    To get the music going again, just press    Play on your iPod, or disconnect and    reconnect iTrip from your iPod.  3. Are iTrip and radio tuned to    matching frequencies?106.91212DXDXDX106.9 LXCharge OWNERS MANUALOWNERS MANUALOWNERS MANUAL21651098712 1311432     34     5 6     78     9 10     1112     13 14     15

Navigation menu