SEGI JR120AM433 CAR Alarm User Manual MR 120 FCC ID

SEGI LIMITED CAR Alarm MR 120 FCC ID

User manual

FCC ID : VA5JR120AM433This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device. IC : 7087A-R120AMStatement: The term “IC:” before the radio certification number only signifiesthat Industry Canada technical specifications were met.CAUTION: The User that modifications to the unit may void the user’sauthority to operate the unitUSER’S GUIDE
User’s GUIDE TABLE OF CONTENTSSafety InformationRemote Button FunctionsRemote Learning RoutineKeyless EntryAlarm ModeTrunk ReleasePanic ModeOptional Programmable FeaturesIgnition LockPassive LockingPage 4Page 4Page 5Page 5Page 5Page 6Page 6Page 7Page 7Page 7Page 3User’s GUIDE
Safety Information Please take these safety precautions into consideration, under the following conditions : Page 41. Servicing the vehicle When servicing your automobile (i.e. changing the oil, washing your car), the Magicar system should be in Valet Mode. 2. Loaning your vehicle to othersWhenever you loan your vehicle to an individual who is not familiar with Magicar, please put the vehicle in Valet mode. This will prevent the vehicle barrower from accidentally activating the Magicar auto-security system. Page 5Remote Learning RoutineThe Magicar will allow up to three remotes to be programmed to one vehicle.Please perform the following procedure to add or reprogram additional remotes.Step1:Activate Valet/ Programming mode by manually turning the ignition on and off three times (between Acc and On)with the key within a 7 second period.The parking lights will flash once with successful completion of this step.Remote Button Functions123456Lock0.5 sec0.5 sec0.5 secUnlockButton Press Function2 sec Panic, Press Lock to shut off Siren Siren Chirps for Lock /Unlock - on/off0.5 sec Passive Arming - on/off2 sec Trunk ReleaseNote : " "Means pressing the button for 2 seconds."( )"Means simultaneously pressing the buttons."( )"Means simultaneously pressing the buttons for 2 seconds.To lock the vehicle, pressing the button for a 0.5 second. To unlock the vehicle, press the button for a 0.5 second. If the pressing of thelock/unlock buttons does not lock/unlock the doors, you will need to release thebutton and try again, as the remote stops transmitting as soon as the LED stopsflashing. If the button is pressed for 2 seconds, it will panic the system.Keyless EntryStep2 :Within a 7 second period after cycling the ignition for the 3rd time,Press the button for a 0.5 second. The parking lights will flash once to confirm that the transmitter has been programmed. You can continue programming additional remotes. The parking lights will flash two times when the programming mode has expired.To arm the vehicle, press the button .To disarm the vehicle, press the button. If pressing the arm/disarm buttons does not arm/disarm the vehicle, you will need torelease the button and try again, as the remote stops transmitting as soon as theLED stops flashing.Press the buttons for a 0.5 second to mute the vehicle siren when arming or disarming your vehicle. Keep in mind that your siren will still be activatedfor all other modes(i.e.panic or alarm trigger) regardless of whether or not your sirenis in mute mode. The siren will be mute only when arming or disarming your vehicle.Alarm Mode
When the alarm is armed, the starter kill function (an optional feature provided byyour installer) is activated. This feature disengages the starter mechanism on yourvehicle and prevents it from starting, even with a key.Page 7Page 6Note :If you lose your remote after you have armed the vehicle, use your key to open the door. The siren will go off. Turn the ignition on and off, 3 times with your key to shut down the alarm and put the system into valet mode. You can cancel valet mode with a remote later on. See: Valet mode, on page 7.Trunk ReleasePress the button for 2 seconds, in order to unlock and release your trunk door. If pressing the trunk release button does not release the trunk, you will need torelease the button and try again, as the remote stops transmitting as soon as theLED stops flashing.Note that the trunk release function will not only release the trunkbut will unlock the all doors as well.Panic Mode If Anti-Jacking option has been programmed (ask your dealer if you wouldlike to have this option) and the Ignition-Kill has been installed , Panic Mode works as Anti-Jacking if the car key is in the ignition. Anti-Jackingmode is activated while key is in the ignition,a) the Siren will go off for 1.5 minutes, and b) Ignition-Kill will be activated after the first 30 seconds. This is to give a 30 second warning to the hijacker, then to disconnect the ignition to stop the vehicle.Press the button for 2 seconds to enter Panic Mode. In this mode, the car will bearmed,if not armed already, and the siren will be activated and the parking lights will beflashed. In order to disengage Panic Mode, press the button.Then, press the button for a 0.5 second to unlock/ disarm your vehicle. OPTIONAL PROGRAMMABLE FEATURESIgnition LockThese additional features may be programmed to the Magicar system by yourauthorized Magicar dealer. This programmable option enables your vehicle to automatically lock the doors oncethe key is in the ignition for 30 Seconds.(Also you can lock the doors, If you step onthe brake pedal within 30 Seconds) In addition, the vehicle will automatically unlockthe doors when the key is pulled out of the ignition. Passive LockingYou can turn this function on or off by pressing the buttons for a 0.5 sec-ond. When setting to passive locking, your system will lock automatically 30 secondsafter all the car doors are closed.

Navigation menu