SEGI JR120AM433 CAR Alarm User Manual MR 120 FCC ID

SEGI LIMITED CAR Alarm MR 120 FCC ID

User manual

Download: SEGI JR120AM433 CAR Alarm User Manual MR 120 FCC ID
Mirror Download [FCC.gov]SEGI JR120AM433 CAR Alarm User Manual MR 120 FCC ID
Document ID872973
Application IDkEhI6+PXWJ5dp4gZyx0Sqg==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize96.41kB (1205163 bits)
Date Submitted2007-11-28 00:00:00
Date Available2007-11-28 00:00:00
Creation Date2007-09-06 16:16:33
Producing SoftwareAdobe Acrobat 8.0
Document Lastmod2007-09-06 16:16:33
Document TitleMR 120 FCC ID
Document CreatorAdobe Illustrator CS2

USER’S GUIDE
FCC ID : VA5JR120AM433
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions :
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
CAUTION : Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate this device.
IC : 7087A-R120AM
Statement : The term “IC:” before the radio certification number only signifies
that Industry Canada technical specifications were met.
CAUTION : The User that modifications to the unit may void the user’s
authority to operate the unit
User’s GUIDE
User’s GUIDETABLE OF CONTENTS
Page 4
Page 4
Page 5
Page 5
Page 5
Page 6
Page 6
Page 7
Page 7
Page 7
Safety Information
Remote Button Functions
Remote Learning Routine
Keyless Entry
Alarm Mode
Trunk Release
Panic Mode
Optional Programmable Features
Ignition Lock
Passive Locking
Page 3
Remote Learning Routine
Safety Information
Please take these safety precautions into consideration, under the following conditions :
1. Servicing the vehicle
When servicing your automobile (i.e. changing the oil, washing your car), the
Magicar system should be in Valet Mode.
2. Loaning your vehicle to others
Whenever you loan your vehicle to an individual who is not familiar with Magicar,
please put the vehicle in Valet mode. This will prevent the vehicle barrower from
accidentally activating the Magicar auto-security system.
Remote Button Functions
Button
Press
Function
0.5 sec
Lock
0.5 sec
Unlock
0.5 sec
Siren Chirps for Lock /Unlock - on/off
2 sec
0.5 sec
Passive Arming - on/off
2 sec
Trunk Release
Panic, Press Lock to shut off Siren
Note : " "
Means pressing the button for 2 seconds.
" ( )" Means simultaneously pressing the buttons.
" ( ) " Means simultaneously pressing the buttons for 2 seconds.
Page 4
The Magicar will allow up to three remotes to be programmed to one vehicle.
Please perform the following procedure to add or reprogram additional remotes.
Step1: Activate Valet/ Programming mode by manually
turning the ignition on and off three times (between Acc and
On) with the key within a 7 second period.
The parking lights will flash once with successful completion of
this step.
Step2 : Within a 7 second period after cycling the ignition for the 3rd time,
Press the
button for a 0.5 second. The parking lights will flash
once to confirm that the transmitter has been programmed.
You can continue programming additional remotes. The parking lights
will flash two times when the programming mode has expired.
Keyless Entry
To lock the vehicle, pressing the
button for a 0.5 second.
To unlock the vehicle, press the
button for a 0.5 second. If the pressing of the
lock/unlock buttons does not lock/unlock the doors, you will need to release the
button and try again, as the remote stops transmitting as soon as the LED stops
flashing. If the
button is pressed for 2 seconds, it will panic the system.
Alarm Mode
To arm the vehicle, press the
button .
To disarm the vehicle, press the
button.
If pressing the arm/disarm buttons does not arm/disarm the vehicle, you will need to
release the button and try again, as the remote stops transmitting as soon as the
LED stops flashing.
Press the
buttons for a 0.5 second to mute the vehicle siren when
arming or disarming your vehicle. Keep in mind that your siren will still be activated
for all other modes(i.e.panic or alarm trigger) regardless of whether or not your siren
is in mute mode. The siren will be mute only when arming or disarming your vehicle.
Page 5
When the alarm is armed, the starter kill function (an optional feature provided by
your installer) is activated. This feature disengages the starter mechanism on your
vehicle and prevents it from starting, even with a key.
Note : If you lose your remote after you have armed the vehicle, use your key
to open the door. The siren will go off. Turn the ignition on and off,
3 times with your key to shut down the alarm and put the system into
valet mode. You can cancel valet mode with a remote later on.
See: Valet mode, on page 7.
OPTIONAL PROGRAMMABLE FEATURES
These additional features may be programmed to the Magicar system by your
authorized Magicar dealer.
Ignition Lock
This programmable option enables your vehicle to automatically lock the doors once
the key is in the ignition for 30 Seconds.(Also you can lock the doors, If you step on
the brake pedal within 30 Seconds) In addition, the vehicle will automatically unlock
the doors when the key is pulled out of the ignition.
Passive Locking
Trunk Release
Press the
button for 2 seconds, in order to unlock and release your trunk door.
If pressing the trunk release button does not release the trunk, you will need to
release the button and try again, as the remote stops transmitting as soon as the
LED stops flashing.Note that the trunk release function will not only release the trunk
but will unlock the all doors as well.
You can turn this function on or off by pressing the
buttons for a 0.5 second. When setting to passive locking, your system will lock automatically 30 seconds
after all the car doors are closed.
Panic Mode
Press the
button for 2 seconds to enter Panic Mode. In this mode, the car will be
armed,if not armed already, and the siren will be activated and the parking lights will be
flashed. In order to disengage Panic Mode, press the
button.
Then, press the
button for a 0.5 second to unlock/ disarm your vehicle.
If Anti-Jacking option has been programmed (ask your dealer if you would
like to have this option) and the Ignition-Kill has been installed , Panic
Mode works as Anti-Jacking if the car key is in the ignition. Anti-Jacking
mode is activated while key is in the ignition,
a) the Siren will go off for 1.5 minutes, and b) Ignition-Kill will be activated
after the first 30 seconds. This is to give a 30 second warning to the
hijacker, then to disconnect the ignition to stop the vehicle.
Page 6
Page 7

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2007:09:06 16:16:33+09:00
Create Date                     : 2007:09:06 16:16:33+09:00
Metadata Date                   : 2007:09:06 16:16:33+09:00
Creator Tool                    : Adobe Illustrator CS2
Format                          : application/pdf
Title                           : MR 120 FCC ID
Document ID                     : uuid:9e64eaaf-3433-41a3-a3ee-3ee10cd80d91
Instance ID                     : uuid:7319c78d-9e05-42ce-9703-4bbb2a5f7db1
Producer                        : Adobe Acrobat 8.0
Page Count                      : 4
Creator                         : Adobe Illustrator(R) 12.0
For                             : Yang, KR
Bounding Box                    : 86 95 595 898
Creator Version                 : 12
Container Version               : 9
Image Height                    : 803
Image Width                     : 509
Image Size                      : 509x803
Megapixels                      : 0.409
EXIF Metadata provided by EXIF.tools
FCC ID Filing: VA5JR120AM433

Navigation menu