SEIKAKU TECHNICAL GROUP UHFIEM-516T Wireless Microphone User Manual NMCQV 512 IEM 516T L

SEIKAKU TECHNICAL GROUP LIMITED Wireless Microphone NMCQV 512 IEM 516T L

User manual

PERSONAL IN EAR MONITOR SYSTEMINSTRUCTIONMANUALHEADPHONESMONITOR VOLUMEL RCHANNEL SELECTORPLL Synthes zed STEREO TRANSMITTERPOWER
CONTROLS AND CONNECTIONSPOWER SUPPLY CONNECTIONNAMES OF PARTSSPECIFICATIONSINSTALLATIONNOTECHARACTER3564CONTENTS211Thank you for your kind using our wireless system. Before using the machine please read the instruction manuel very carefully. According to our instruction manuel for ensure you using of the best function and performance. If any defect please contact with our agent or delear. It is our pleasure to serve you. Thank you for your cooperationKEEP AWAY RAINING OR SUN SHINE.BE CAREFUL, DON'T DROP OFF THE WIRELESS TRANSMITTER TO FLOORTHE WIRELESS TRANSMITTER LOCATED AT GOOD CONDITION PLACE.1mTRANSMITTER1m5IF YOU ARE NOT TECHNICAL ENGINEER PLS. DO NOTMODIFIED OR KNOCK - DOWNIT.
1SPECIFICATIONS:Frequency range 750~865MHzFrequency stability 100ppm(-10 )Antenna output BNC socket 50 F output power Max 2.33mWAF frequency response 50-15KHzModulation Stereo FM working on the "pilot tone" principleSpurious emission 55dBc(Type)Power supply extend DC 12-15V 500mA AC / DC AdaptorHeadphone output 1/4(6.3mm) stereo jackLoad impekance of headphone 16outputAF inputs XLR / 6.3mm ,RCA lineTHD at 1KHz 1%Dimensions 210(W) 232(D) 44(H)mm 8.27" 9.13" 1.73"Weight 1.35Kg(298lb) R 1. Volume control. 2. AF-LEVEL display. 3. Channel display. 4.Channel selector control. 5. Headphone monitor volume control. 6. Headphone monitor. 7. Power on indicator. 8. Power switch. 9.DC input socket.10.Line input (left) .11.Line input (right).12.Input mode.13.Stereo / mono control 14.Mic input.15.Antenna.(FRONT PANEL)NAMES OF PARTS(REAR PANEL)DC INPUT 12-15V+ + --PUSH22 B 1MIC. INPUT1-CD PLAYER2-CASSETTE PLAYER3-RADIO TUNER4-AUX INPUT1 2 3 4 STEREO MONO ANTENNA910 11 12 13 14 151243567HEADPHONESMONITOR VOLUMEL RCHANNEL SELECTORPLL Synthes zed STEREO TRANSMITTERPOWER84CONTROLS AND CONNECTIONSINSTRUCTION MANUALVOLUMEL RCHANNEL SELEPLL Synthes zed STEREO TRANSMITTERDISPLAYA AF-LEVEL Display : The AF level is displayed by an LED meter A which indicates the strength of the audio signal received.VOLUME ADJUSTORThe purpose of this control is to give the ability to provide an audio output level from the wireless sys-tem that is similar to that of a wired micrephone.VOLUMEL RCHANNEL SELEPLL Synthes zed STEREO TRANSMITTERMonitoring the sound singnal, headphone connectionPlease use heaphones with a 1/4(6.3mm ) stereo jack plug.HEADPHONESMONITOR POWER
2INSTRUCTION MANUALINSTALL ANTENNAAudio Input Connector You can connect a 1/4 inch phone plug or balance phone plug or RCA line input. Input mode and stereo / mono control.UNBALINANTEDC INPUT 12-15V+ + --PUSH22 B 1MIC. INPUT1-CD PLAYER2-CASSETTE PLAYER3-RADIO TUNER4-AUX INPUT1 2 3 4 STEREO MONOIN BALANCEDPUSH22 B 1MIC. INPUTRCAINSTRUCTION MANUAL3HEADPHONESMONITOR POWERPOWER SUPPLY CONNECTIONUse dc power supply could switch with adaptor supply or batter of 12V-15V. Connection DC supply , DC plug connection with "DC INPUT" socket.Another plug terminal connection with battery or power supply. DC12V-15VINPOWER SWITCHMake sure the correct current vol-tage. Push this power switch onceto turn on; push it again to turn the power off. If unit still fails to operate, Secure a qualified technician or contact us for a Return Authoriza-tion prior toshipment.*Disconnect power supply beforeremoving receiver cover.DC INPUT 12-15V+ + --1-CD PLAYER2-CASSETTE PLAYER3-RADIO TUNER4-AUX INPUT1 2 3 4 STEREO MONO
2INSTRUCTION MANUALINSTALL ANTENNAAudio Input Connector You can connect a 1/4 inch phone plug or balance phone plug or RCA line input. Input mode and stereo / mono control.UNBALINANTEDC INPUT 12-15V+ + --PUSH22 B 1MIC. INPUT1-CD PLAYER2-CASSETTE PLAYER3-RADIO TUNER4-AUX INPUT1 2 3 4 STEREO MONOIN BALANCEDPUSH22 B 1MIC. INPUTRCAINSTRUCTION MANUAL3HEADPHONESMONITOR POWERPOWER SUPPLY CONNECTIONUse dc power supply could switch with adaptor supply or batter of 12V-15V. Connection DC supply , DC plug connection with "DC INPUT" socket.Another plug terminal connection with battery or power supply. DC12V-15VINPOWER SWITCHMake sure the correct current vol-tage. Push this power switch onceto turn on; push it again to turn the power off. If unit still fails to operate, Secure a qualified technician or contact us for a Return Authoriza-tion prior toshipment.*Disconnect power supply beforeremoving receiver cover.DC INPUT 12-15V+ + --1-CD PLAYER2-CASSETTE PLAYER3-RADIO TUNER4-AUX INPUT1 2 3 4 STEREO MONO
1SPECIFICATIONS:Frequency range 750~865MHzFrequency stability 100ppm(-10 )Antenna output BNC socket 50 F output power Max 50mWAF frequency response 50-15KHzModulation Stereo FM working on the "pilot tone" principleSpurious emission 55dBc(Type)Power supply extend DC 12-15V 500mA AC / DC AdaptorHeadphone output 1/4(6.3mm) stereo jackLoad impekance of headphone 16outputAF inputs XLR / 6.3mm ,RCA lineTHD at 1KHz 1%Dimensions 210(W) 232(D) 44(H)mm 8.27" 9.13" 1.73"Weight 1.35Kg(298lb) R 1. Volume control. 2. AF-LEVEL display. 3. Channel display. 4.Channel selector control. 5. Headphone monitor volume control. 6. Headphone monitor. 7. Power on indicator. 8. Power switch. 9.DC input socket.10.Line input (left) .11.Line input (right).12.Input mode.13.Stereo / mono control 14.Mic input.15.Antenna.(FRONT PANEL)NAMES OF PARTS(REAR PANEL)DC INPUT 12-15V+ + --PUSH22 B 1MIC. INPUT1-CD PLAYER2-CASSETTE PLAYER3-RADIO TUNER4-AUX INPUT1 2 3 4 STEREO MONO ANTENNA910 11 12 13 14 151243567HEADPHONESMONITOR VOLUMEL RCHANNEL SELECTORPLL Synthes zed STEREO TRANSMITTERPOWER84CONTROLS AND CONNECTIONSINSTRUCTION MANUALVOLUMEL RCHANNEL SELEPLL Synthes zed STEREO TRANSMITTERDISPLAYA AF-LEVEL Display : The AF level is displayed by an LED meter A which indicates the strength of the audio signal received.VOLUME ADJUSTORThe purpose of this control is to give the ability to provide an audio output level from the wireless sys-tem that is similar to that of a wired micrephone.VOLUMEL RCHANNEL SELEPLL Synthes zed STEREO TRANSMITTERMonitoring the sound singnal, headphone connectionPlease use heaphones with a 1/4(6.3mm ) stereo jack plug.HEADPHONESMONITOR POWER
CONTROLS AND CONNECTIONSPOWER SUPPLY CONNECTIONNAMES OF PARTSSPECIFICATIONSINSTALLATIONNOTECHARACTER3564CONTENTS211Thank you for your kind using our wireless system. Before using the machine please read the instruction manuel very carefully. According to our instruction manuel for ensure you using of the best function and performance. If any defect please contact with our agent or delear. It is our pleasure to serve you. Thank you for your cooperationKEEP AWAY RAINING OR SUN SHINE.BE CAREFUL, DON'T DROP OFF THE WIRELESS TRANSMITTER TO FLOORTHE WIRELESS TRANSMITTER LOCATED AT GOOD CONDITION PLACE.1mTRANSMITTER1m5IF YOU ARE NOT TECHNICAL ENGINEER PLS. DO NOTMODIFIED OR KNOCK - DOWNIT.

Navigation menu