SEIKAKU TECHNICAL GROUP UHFIEM-516T Wireless Microphone User Manual NMCQV 512 IEM 516T L
SEIKAKU TECHNICAL GROUP LIMITED Wireless Microphone NMCQV 512 IEM 516T L
User manual
PERSONAL IN EAR MONITOR SYSTEM INSTRUCTION MANUAL PLL Synthes zed STEREO TRANSMITTER VOLUME CHANNEL SELECTOR HEADPHONESMONITOR POWER CONTENTS CHARACTER SPECIFICATIONS NAMES OF PARTS INSTALLATION POWER SUPPLY CONNECTION CONTROLS AND CONNECTIONS NOTE 1m 1m TRANSMITTER THE WIRELESS TRANSMITTER LOCATED AT GOOD CONDITION PLACE. BE CAREFUL, DON'T DROP OFF THE WIRELESS TRANSMITTER TO FLOOR KEEP AWAY RAINING OR SUN SHINE. Thank you for your kind using our wireless system. Before using the machine please read the instruction manuel very carefully. According to our instruction manuel for ensure you using of the best function and performance. If any defect please contact with our agent or delear. It is our pleasure to serve you. Thank you for your cooperation IF YOU ARE NOT TECHNICAL ENGINEER PLS. DO NOT MODIFIED OR KNOCK - DOWN IT. SPECIFICATIONS: INSTRUCTION MANUAL Frequency range Frequency stability Antenna output R F output power AF frequency response Modulation CONTROLS AND CONNECTIONS VOLUME ADJUSTOR The purpose of this control is to give the ability to provide an audio output level from the wireless system that is similar to that of a wired micrephone. PLL Synthes zed STEREO TRANSMITTER VOLUME CHANNEL SELE 750~865MHz 100ppm(-10 BNC socket 50 Max 2.33mW 50-15KHz Stereo FM working on the "pilot tone" principle 55dBc(Type) 12-15V 500mA AC / DC Adaptor 1/4(6.3mm) stereo jack 16 Spurious emission Power supply extend DC Headphone output Load impekance of headphone output AF inputs THD at 1KHz Dimensions XLR / 6.3mm ,RCA line 1% 210(W) 232(D) 44(H)mm 8.27" 9.13" 1.73" 1.35Kg(298lb) Weight DISPLAY AF-LEVEL Display : The AF level is displayed by an LED meter A which indicates the strength of the audio signal received. NAMES OF PARTS (FRONT PANEL) PLL Synthes zed STEREO TRANSMITTER PLL Synthes zed STEREO TRANSMITTER VOLUME CHANNEL SELE VOLUME HEADPHONESMONITOR CHANNEL SELECTOR POWER 6 7 8 HEADPHONESMONITOR POWER 10 11 12 13 MIC. INPUT 14 1. Volume control. 2. AF-LEVEL display. 3. Channel display. 4.Channel selector control. 5. Headphone monitor volume control. 6. Headphone monitor. 7. Power on indicator. PUSH 1 2 3 4 STEREO MONO DC INPUT Please use heaphones with a 1/4 (6.3mm ) stereo jack plug. Monitoring the sound singnal, headphone connection 1-CD PLAYER 2-CASSETTE PLAYER 3-RADIO TUNER 4-AUX INPUT 12-15V (REAR PANEL) ANTENNA 15 8. Power switch. 9.DC input socket. 10.Line input (left) . 11.Line input (right). 12.Input mode. 13.Stereo / mono control 14.Mic input. 15.Antenna. INSTRUCTION MANUAL INSTRUCTION MANUAL POWER SUPPLY CONNECTION Use dc power supply could switch with adaptor supply or batter of 12V-15V. Connection DC supply , DC plug connection with "DC INPUT" socket. Another plug terminal connection with battery or power supply. INSTALL ANTENNA TE AN 12-15V 1-CD PLAYER 2-CASSETTE PLAYER 3-RADIO TUNER 4-AUX INPUT 1 2 3 4 STEREO MONO DC INPUT IN DC 12V-15V Audio Input Connector IN PUSH MIC. INPUT PUSH 1 2 3 4 STEREO MONO DC INPUT 1-CD PLAYER 2-CASSETTE PLAYER 3-RADIO TUNER 4-AUX INPUT 12-15V You can connect a 1/4 inch phone plug or balance phone plug or RCA line input. Input mode and stereo / mono control. MIC. INPUT IN BALANCED POWER SWITCH Make sure the correct current voltage. Push this power switch once to turn on; push it again to turn the power off. If unit still fails to operate, Secure a qualified technician or contact us for a Return Authorization prior toshipment. *Disconnect power supply before removing receiver cover. UNBAL RCA HEADPHONESMONITOR POWER INSTRUCTION MANUAL INSTRUCTION MANUAL POWER SUPPLY CONNECTION Use dc power supply could switch with adaptor supply or batter of 12V-15V. Connection DC supply , DC plug connection with "DC INPUT" socket. Another plug terminal connection with battery or power supply. INSTALL ANTENNA TE AN 12-15V 1-CD PLAYER 2-CASSETTE PLAYER 3-RADIO TUNER 4-AUX INPUT 1 2 3 4 STEREO MONO DC INPUT IN DC 12V-15V Audio Input Connector IN PUSH MIC. INPUT PUSH 1 2 3 4 STEREO MONO DC INPUT 1-CD PLAYER 2-CASSETTE PLAYER 3-RADIO TUNER 4-AUX INPUT 12-15V You can connect a 1/4 inch phone plug or balance phone plug or RCA line input. Input mode and stereo / mono control. MIC. INPUT IN BALANCED POWER SWITCH Make sure the correct current voltage. Push this power switch once to turn on; push it again to turn the power off. If unit still fails to operate, Secure a qualified technician or contact us for a Return Authorization prior toshipment. *Disconnect power supply before removing receiver cover. UNBAL RCA HEADPHONESMONITOR POWER SPECIFICATIONS: INSTRUCTION MANUAL Frequency range Frequency stability Antenna output R F output power AF frequency response Modulation CONTROLS AND CONNECTIONS VOLUME ADJUSTOR The purpose of this control is to give the ability to provide an audio output level from the wireless system that is similar to that of a wired micrephone. PLL Synthes zed STEREO TRANSMITTER VOLUME CHANNEL SELE 750~865MHz 100ppm(-10 BNC socket 50 Max 50mW 50-15KHz Stereo FM working on the "pilot tone" principle 55dBc(Type) 12-15V 500mA AC / DC Adaptor 1/4(6.3mm) stereo jack 16 Spurious emission Power supply extend DC Headphone output Load impekance of headphone output AF inputs THD at 1KHz Dimensions XLR / 6.3mm ,RCA line 1% 210(W) 232(D) 44(H)mm 8.27" 9.13" 1.73" 1.35Kg(298lb) Weight DISPLAY AF-LEVEL Display : The AF level is displayed by an LED meter A which indicates the strength of the audio signal received. NAMES OF PARTS (FRONT PANEL) PLL Synthes zed STEREO TRANSMITTER PLL Synthes zed STEREO TRANSMITTER VOLUME CHANNEL SELE VOLUME HEADPHONESMONITOR CHANNEL SELECTOR POWER 6 7 8 HEADPHONESMONITOR POWER 10 11 12 13 MIC. INPUT 14 1. Volume control. 2. AF-LEVEL display. 3. Channel display. 4.Channel selector control. 5. Headphone monitor volume control. 6. Headphone monitor. 7. Power on indicator. PUSH 1 2 3 4 STEREO MONO DC INPUT Please use heaphones with a 1/4 (6.3mm ) stereo jack plug. Monitoring the sound singnal, headphone connection 1-CD PLAYER 2-CASSETTE PLAYER 3-RADIO TUNER 4-AUX INPUT 12-15V (REAR PANEL) ANTENNA 15 8. Power switch. 9.DC input socket. 10.Line input (left) . 11.Line input (right). 12.Input mode. 13.Stereo / mono control 14.Mic input. 15.Antenna. CONTENTS CHARACTER SPECIFICATIONS NAMES OF PARTS INSTALLATION POWER SUPPLY CONNECTION CONTROLS AND CONNECTIONS NOTE 1m 1m TRANSMITTER THE WIRELESS TRANSMITTER LOCATED AT GOOD CONDITION PLACE. BE CAREFUL, DON'T DROP OFF THE WIRELESS TRANSMITTER TO FLOOR KEEP AWAY RAINING OR SUN SHINE. Thank you for your kind using our wireless system. Before using the machine please read the instruction manuel very carefully. According to our instruction manuel for ensure you using of the best function and performance. If any defect please contact with our agent or delear. It is our pleasure to serve you. Thank you for your cooperation IF YOU ARE NOT TECHNICAL ENGINEER PLS. DO NOT MODIFIED OR KNOCK - DOWN IT.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2001:11:16 14:28:47 Modify Date : 2001:11:19 13:40:03+08:00 Producer : Corel PDF Engine Version 9.397 Author : pc43 Creator : CorelDRAW Version 9.397 Title : NMCQV-512(IEM-516T¨âµL) Page Count : 8EXIF Metadata provided by EXIF.tools