SENA TECHNOLOGIES SP22 Motorcycle Bluetooth Communication System User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2633634
Application ID	iXQQ9vYPQwFu9KQCRO3FQQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	69.27kB (865866 bits)
Date Submitted	2015-06-02 00:00:00
Date Available	2015-11-29 00:00:00
Creation Date	2015-04-23 15:33:53
Producing Software	Microsoft® Word 2010
Document Lastmod	2015-04-23 15:33:53
Document Title	User Manual
Document Creator	Microsoft® Word 2010
Document Author:	i

| 10U
10U
Motorcycle Bluetooth Communication System with Handlebar Remote
| 10U
© 1998-2015 Sena Technologies, Inc. All rights reserved.
Sena Technologies, Inc reserves the right to make any changes and improvements to its product without providing prior
notice.
Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. 10U™, 10C™, Prism™, 20S™,
Snowtalk™, 3S™, SMH10™, SMH5™, SMH5-FM™, SPH10™, SPH10H™, SPH10H-FM™, SMH10R™, SPH10S™, SPH10H™,
®
SR10™, SR10i™, SM10™, EXPAND™, Bluetooth Pack for GoPro are trademarks of Sena Technologies, Inc. or its subsidiaries.
These trademarks may not be used without the express permission of Sena.
Sena Technologies, Inc. (“Sena”) is not affiliated with Shoei® Co,. Ltd. The Sena 10U for Shoei® Neotec is an after-market accessory
specially designed and manufactured by Sena Technologies, Inc. for the Shoei® Neotec helmets. The Sena 10U for Shoei® GT-Air is
an after-market accessory specially designed and manufactured by Sena Technologies, Inc. for the Shoei® GT-Air helmets. Sena
Technologies, Inc. (“Sena”) is not affiliated with Schuberth-Welk Gmbh. The 10U for Schuberth® C3 & C3 pro is an after-market
accessory specially designed and manufactured by Sena Technologies, Inc. for the Schuberth® C3 & C3 pro helmets. Arai® is a
registered trademark of Arai® Helmet, Ltd. The 10U for Arai® full-face helmets is an after-market accessory specially designed and
manufactured by Sena Technologies, Inc. for the the Arai® full-face helmets.
®
GoPro is a registered trademark of Woodman Labs of San Mateo, California. Sena Technologies, Inc. (“Sena”) is not affiliated with
Woodman Labs. The Sena Bluetooth Pack for GoPro® is an after-market accessory specially designed and manufactured by Sena
Technologies, Inc. for the GoPro® Hero3 allowing for Bluetooth capabilities.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license.
iPhone, iPod touch are registered trademarks of Apple Inc. Zumo™ is a trademark of Garmin Ltd. or its subsidiaries. TomTom™ is the
trademark or registered trademark owned by TomTom International B.V. Other trademarks and tradenames are those of their
respective owners.
| 10U
CONTENTS
1 INTRODUCTION
2 PACKAGE CONTENTS
3 INSTALLING THE 10U ON YOUR HELMET
3.1 10U for Shoei GT-Air
3.2 Handlebar Remote
4 GETTING STARTED
4.1 Button Operation
4.2 Powering On and Off
4.2.1 Headset
4.2.2 Handlebar Remote
4.3 Pairing the Headset and the Handlebar Remote
4.4 Charging
4.5 Checking the Battery Level
4.6 Volume Adjustment
4.7 Sena Softwares
4.7.1 Sena Device Manager
4.7.2 Sena Smartphone App
5 PAIRING THE 10U WITH BLUETOOTH DEVICES
5.1 Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device
5.2 Second Mobile Phone Pairing - Second Mobile Phone, GPS, and SR10
5.3 Advanced Selective Pairing: A2DP Stereo or Handsfree
5.3.1 A2DP Stereo Music Only
5.3.2 HFP for Phone Call Only
5.4 Intercom Pairing
5.4.1 Pairing with Other 10U Headsets for Intercom Conversation
5.4.2 Pairing with Other Sena Headset Models for Intercom Conversation
6 MOBILE PHONE, GPS, SR10
6.1 Mobile Phone Call Making and Answering
6.2 Speed Dialing
6.3 GPS Navigation
6.4 Sena SR10, Two-Way Radio Adapter
7 STEREO MUSIC
7.1 Bluetooth Stereo Music
7.2 Music Sharing
8 INTERCOM
8.1 Two-way Intercom
8.1.1 Starting Two-way Intercom
| 10U
8.1.2 Ending Two-way Intercom
8.2 Three-way Intercom
8.2.1 Starting Three-way Intercom
8.2.2 Ending Three-way Intercom
8.3 Four-way Intercom
8.3.1 Starting Four-way Intercom
8.3.2 Ending Four-way Intercom
9 THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT
10 UNIVERSAL INTERCOM
10.1 Universal Intercom Pairing
10.2 Two-way Universal Intercom
10.3 Three-way Universal Intercom
10.4 Four-way Universal Intercom
10.4.1 Four-way Universal Intercom Case 1
10.4.2 Four-way Universal Intercom Case 2
11 FM RADIO
11.1 FM Radio On/Off
11.2 Preset Stations
11.3 Seek and Save
11.4 Scan and Save
11.5 Temporary Preset
11.6 Region Selection
12 FUNCTION PRIORITY
13 CONFIGURATION SETTING
13.1 Assigning Speed Dial
13.2 Enabling/Disabling Voice Activated Phone Answering
13.3 Enabling/Disabling Voice Activated Intercom
13.4 Enabling/Disabling Voice Prompts
13.5 Enabling/Disabling RDS AF
13.6 Enabling/Disabling Sidetone
13.7 Enabling/Disabling Advanced Noise Control™
13.8 Delete All Bluetooth Pairing Information
13.9 Factory Reset
13.10 Remote Control Pairing
13.11 Exit Voice Configuration Menu
14 FIRMWARE UPGRADE
15 TROUBLESHOOTING
15.1 Intercom Failure
15.2 Intercom Reconnection
| 10U
15.3 Fault Reset
15.4 Factory Reset
17 OPERATION QUICK REFERENCE
17.1 Using the Handlebar Remote
17.2 Using the Headset Buttons
| 10U
1 INTRODUCTION
Thank you for choosing the Sena 10U, Motorcycle Bluetooth Communication System with Handlebar Remote. With the
10U, you can control the headset using the Handlebar Remote to call handsfree on your Bluetooth mobile phone, listen to
stereo music or voice instructions of GPS navigations wirelessly, and have intercom conversations in full duplex with a
passenger or other motorcycle riders.
The 10U is compliant with the Bluetooth 4.0 supporting the following profiles: Headset Profile, Hands-Free Profile (HFP),
Advanced Audio Distribution Profile (A2DP), and Audio Video Remote Control Profile (AVRCP). Please check with the
manufacturers of other device to determine their compatibility with this headset.
Please read this User’s Guide carefully before using the headset. Also check www.sena.com for the latest version of the
User’s Guide and additional information related to Sena Bluetooth products.
The 10U features:
●
Bluetooth 4.0
●
Invisible beauty with custom design
●
Safe and easy operations by Bluetooth Low Energy Handlebar Remote
●
Bluetooth intercom up to 1 kilometer (0.6 miles)*
●
Four-way intercom
●
Voice prompts
●
Smartphone App for iPhone and Android
●
Built-in FM radio tuner with a station scan and save function
●
Universal Intercom™
●
Music sharing
●
Advanced Noise Control™
●
Firmware upgradeable
* in open terrain
--------------------------------Key Specifications:
●
Bluetooth 4.0
●
Supporting profiles: Headset Profile, Hands-Free Profile (HFP), Advanced Audio Distribution Profile (A2DP), and
Audio Video Remote Control Profile (AVRCP).
| 10U
2 PACKAGE CONTENTS
●
10U Headset
●
Handlebar Remote
●
USB Power and Data Cable
●
Cigarette Charger
| 10U
3 INSTALLING THE 10U ON YOUR HELMET
3.1 10U for Shoei GT-Air
1. Before you install the 10U, remove the cheek pads and ear pads of your helmet.
2. Align the right speaker with the right cheek pad base and insert the two clasps in the corresponding notches.
3. Unfasten the two snaps of the center pad in the back and insert the battery unit between the external shell and the
inner shell. Click the two snaps through the snap holder of the battery unit.
4. Slide in the antenna between the external shell and the left inner shell. Align its snap holder with the bottom left snap.
5. Align the left speaker with the left cheek pad base and insert the two clasps in the corresponding notches.
6. Insert the control buttons unit between the external shell and the left inner shell. Align its snap holder with the front left
snap.
7. Hide the wires behind the center pad and reinstall the cheek pads. Make sure to click the snaps through the snap
holders.
| 10U
3.2 10U for Schuberth
1. Before you install the 10U, remove the cheek pads and ear pads of your helmet.
2. Align the right speaker with the right cheek pad base and insert the two clasps in the corresponding notches.
3. Unfasten the two snaps of the center pad in the back and insert the battery unit between the external shell and the
inner shell. Click the two snaps through the snap holder of the battery unit.
4. Slide in the antenna between the external shell and the left inner shell. Align its snap holder with the bottom left snap.
5. Align the left speaker with the left cheek pad base and insert the two clasps in the corresponding notches.
6. Insert the control buttons unit between the external shell and the left inner shell. Align its snap holder with the front left
snap.
7. Hide the wires behind the center pad and reinstall the cheek pads. Make sure to click the snaps through the snap
holders
3.2 Handlebar Remote
1. Gently spread the two ends of the Handlebar Remote.
2. Clip it on the left handlebar of your motorcycle. Make sure you can comfortably control the Joystick with your left thumb.
| 10U
4 GETTING STARTED
4.1 Button Operation
The 10U is controlled by the Bluetooth Handlebar Remote. You must pair them together first. Please refer to section 4.3,
“Pairing the Headset and the Handlebar Remote” for more details. If the Handlebar Remote runs out of battery, you can
use the emergency buttons on the headset to control the functions. Please refer to section 17.2, “Using the Headset
Buttons” for more details.
Front Button
●
●
●
●
●
Enter into mobile phone pairing mode
Answer and end a mobile phone call
Speed Dial
Call transfer between mobile phone and headset
Turn on/off FM tuner
Joystick
●
●
●
●
●
●
●
●
●
●
Volume adjustment
Enter into intercom pairing mode
Start and end intercom conversation
Answer and end a mobile phone call
Reject an incoming mobile phone call
Play and pause Bluetooth stereo device
Track forward and track back music
Enter into voice configuration setting
Navigate through configuration menu
Seek FM radio station
Rear Button
● Enter into headset pairing mode
10
| 10U
4.2 Powering On and Off
4.2.1 Headset
To power on the headset, press the (+) Button and the (-) Button at the same time while hearing ascending beeps and a
voice prompt, “Hello”. To power off the headset, press the (+) Button and the (-) Button at the same time while hearing
descending beeps and a voice prompt, “Goodbye”.
4.2.2 Handlebar Remote
To power on the device, tap the Front Button and the blue LED will appear. To power off the device, press and hold the
Front Button and the Rear Button for two seconds until red LED flashes.
4.3 Pairing the Headset and the Handlebar Remote
Turn on the headset and the Handlebar Remote. On the headset, press and hold the (+) Button for 10 seconds until you
hear a voice prompt, “Configuration menu”. Keep tapping the (+) Button until you hear a voice prompt, “Remote control
pairing”. On the Handlebar Remote, press and hold the Rear Button for 5 seconds until the LED alternates red and blue.
The main unit and the Handlebar Remote will be paired shortly after.
4.4 Charging
You can charge the headset and the Handlebar Remote by connecting the supplied USB power & data cable into a
computer’s USB port or USB wall charger. You can use any standard micro-USB cable to charge the units. The charging
LEDs turn red while they are charging and turn blue when they are fully charged. It takes about 2.5 hours to be
completely charged.
4.5 Checking the Battery Level
When the headset or the Handlebar Remote is powering on, the red LED flashes rapidly indicating the battery level.
4 flashes = High, 70~100%
3 flashes = Medium, 30~70%
2 flashes = Low, 0~30%
4.6 Volume Adjustment
You can easily adjust the volume by moving the Joystick up or down. You will hear a beep when the volume reaches the
maximum or minimum level. The volume is set and maintained independently at different levels for each audio source
even when you reboot the headset. For example, once you set the volume for mobile phone handsfree, it will not change
even if you adjust the volume for your Bluetooth MP3 music. However, if you adjust the volume during stand-by mode, it
will affect volume levels of every audio source.
4.7 Sena Softwares
4.7.1 Sena Device Manager
11
| 10U
The Sena Device Manager allows you to upgrade the firmware and configure the device settings directly from your PC.
Using this software, you can assign speed dial presets, FM radio frequency presets and more. It is available for both
Windows and Mac. For more information on downloading the Device Manager, please visit www.sena.com.
4.7.2 Sena Smartphone App
The Sena Smartphone App allows you to configure device settings and read the User’s Guide and the Quick Start Guide.
Pair your phone with your 10U headset (please refer to section 5.1 “Mobile Phone Pairing - Mobile Phone, Bluetooth
Stereo Device”). Run the Sena Smartphone App and you can configure its settings directly from your smartphone. You
can download the Sena Smartphone App for Android or iPhone from www.sena.com/app.
12
| 10U
5 PAIRING THE 10U WITH BLUETOOTH DEVICES
Before using the 10U Bluetooth headset with any other Bluetooth devices for the first time, you will need to pair them
together. You can pair the 10U with Bluetooth mobile phones, Bluetooth stereo devices such as MP3 players, or
motorcycle specific Bluetooth GPS navigation, and with other Sena Bluetooth headsets. The pairing operation is required
only once for each Bluetooth device. The headset remains paired with the devices and automatically reconnects to them
when they are within range. You will hear a high toned single beep and a voice prompt whenever the headset reconnects
to the paired device: “Phone connected” to a mobile phone, “Media connected” to a Bluetooth stereo device.
5.1 Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device
Follow the procedure below to pair a mobile phone or a Bluetooth stereo device such as an MP3 player with your 10U.
1. Press and hold the Front Button for 5 seconds until you hear a voice prompt, “Phone pairing”.
2. Search for Bluetooth devices on your mobile phone. Select the Sena 10U in the list of the devices detected on the
mobile phone.
3. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
4. The mobile phone confirms that pairing has been completed and the 10U is ready to use. You will hear a voice prompt,
“Your headset is paired”.
5. If the pairing process is not completed within three minutes, the 10U will return to stand-by mode.
Note:
1. If the Bluetooth connection between the headset and a mobile phone is disconnected, tap the Front Button to recover
the Bluetooth connection immediately.
2. If the Bluetooth connection between the headset and a media player is disconnected, press the Joystick for 2 seconds
to recover the Bluetooth connection and play.
5.2 Second Mobile Phone Pairing - Second Mobile Phone, GPS, and SR10
Typical Bluetooth headsets can connect with only one HFP (Hands-Free-Profile) Bluetooth device such as mobile phone,
GPS, and Sena SR10, but second mobile phone pairing allows the headset to connect with two HFP devices
simultaneously. So, when you already have a mobile phone connected with the 10U, you can also pair and connect a
second mobile phone or other HFP devices.
1. To pair the HFP device, press and hold the Joystick for 5 seconds until the red LED flashes red rapidly and you hear
voice prompt, “Intercom pairing”.
2. Within 2 seconds, tap the Front Button again, then the LED flashes blue rapidly and you will hear a voice prompt,
“Second mobile phone pairing”.
3. Search for Bluetooth devices on the HFP device. Select the Sena 10U in the list of the devices detected on the HFP
device.
4. Enter 0000 for the PIN. Some HFP devices may not ask for the PIN.
5. The HFP device confirms that the pairing is completed and the 10U is ready to use. You will hear a voice prompt,
13
| 10U
“Your headset is paired”.
Note:
- If the GPS is also your preferred Bluetooth stereo music source, you can pair the GPS to the 10U by following the
simple procedure in section 5.1, “Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device”.
- You have to use a motorcycle specific GPS, which transmits turn-by-turn voice instructions to the headset by Bluetooth.
Most automotive GPS systems do not have this feature.
- The Sena SR10 is a Bluetooth two-way radio adapter for group communication, and uses Hands-Free Profile. The
incoming audio from the two-way radio via SR10 is heard in the background while having an intercom conversation or a
mobile phone call.
- The GPS navigation or a radar detector could be connected to the SR10 by wire. The GPS voice instruction or the radar
detector alarm is also heard in the background via SR10 while having an intercom conversation or a phone call. Please
refer to the SR10 User’s Guide for details.
5.3 Advanced Selective Pairing: A2DP Stereo or Handsfree
When you are using a smartphone, sometimes you may need to selectively use the 10U for A2DP stereo music only or
for mobile phone handsfree only. These instructions are for advanced users who want to pair the 10U to their
smartphones with only one selective profile: A2DP for stereo music of HFP for phone calls.
If you have previously paired a mobile phone to the 10U, you must clear the previous pairing list on both devices: the
mobile phone and the 10U. To clear the pairing list on the 10U, please do a factory reset or following the pairing list
clearing procedure described in section 13.9, “Factory Reset” or 13.8, “Delete All Bluetooth Pairing Information”. To clear
the pairing list on the mobile phone, please refer to the mobile phone manual. For most smartphones, delete the Sena
10U from the list of Bluetooth devices in the settings menu.
5.3.1 A2DP Stereo Music Only
1. Turn on the headset and press the Front Button for 5 seconds until the LED flashes red and blue alternately and you
hear multiple beeps.
2. Within 2 seconds, press the Joystick for 1 second again, then the LED flashes red and you hear “Media selective
pairing”.
3. Search for Bluetooth devices on your smartphone. Select the Sena 10U in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for PIN.
5.3.2 HFP for Phone Call Only
1. Turn on the headset and press the Front Button for 5 seconds until the LED flashes red and blue alternately and you
hear multiple beeps.
2. Within 2 seconds, tap the Front Button again, then the LED flashes blue and you hear “Phone selective pairing”.
3. Search for Bluetooth devices on your smartphone. Select the Sena 10U in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for PIN.
14
| 10U
5.4 Intercom Pairing
5.4.1 Pairing with Other 10U Headsets for Intercom Conversation
The 10U can be paired with up to three other headsets for Bluetooth intercom conversation.
1. Turn on the two 10U headsets (A and B) that you would like to pair with each other.
2. Press and hold the Joystick of the headset A and B for 5 seconds until red LEDs of the both units start to flash rapidly.
You will hear a voice prompt, “Intercom pairing”.
3. Press the Joystick for 1 second of any one of the two headsets A and B, and wait unit the LEDs of both headsets turn
to blue and intercom connection is automatically established. The two 10U headsets A and B are paired with each other
for intercom conversation. If the pairing process is not completed within one minute, the 10U will return to stand-by mode.
Pairing A & B
4. You can make other pairing between headsets A and C, and between headsets A and D by following the same
procedure as above.
5. The intercom pairing queue is ‘Last-Come, First-Served’. If a headset has multiple paired headsets for intercom
conversations, the last paired headset is set as first intercom friend. The previous intercom friend becomes second
intercom friend, and third intercom friend.
Note:
For example, after the pairing procedures listed above, headset D is the first intercom friend of headset A. Headset C is
the second intercom friend of headset A, and headset B is the third intercom friend of headset A.
5.4.2 Pairing with Other Sena Headset Models for Intercom Conversation
The 10U can be paired with all other Sena headset models such as the 20S, SMH10 and the SMH5 for intercom
conversation. Please follow the same procedure as above to pair with these headset models.
Note:
The SMH5 cannot participate in three-way or four-way conference intercom with the 10U. The SMH5 has a limited
capability of having two-way intercom with other Sena headsets.
15
| 10U
6 MOBILE PHONE, GPS, SR10
6.1 Mobile Phone Call Making and Answering
1. When you have an incoming call, simply tap the Front Button or press the Joystick for 1 second to answer the call.
2. You can also answer the incoming call by loudly speaking any word of your choice if Voice Activated Phone Answering
(VOX Phone) is enabled, unless you are connected to intercom.
3. To end a call, tap the Front Button or press the Joystick for 2 seconds until you hear a beep, or wait for the called
person to end the call.
4. To reject a call, press the Joystick for 2 seconds until you hear a beep while the phone is ringing.
5. To transfer a call between the mobile phone and the headset during the phone conversation, press the Front Button for
2 seconds until you hear a beep.
6. There are several ways to make a phone call:
- Enter numbers on your mobile phone’s keypad and make a call. Then the call is automatically transferred to the headset.
- For some older mobile phones, which do not automatically transfer calls to the headset, press the Front Button after
entering phone numbers on the mobile phone keypad.
- Tap the Front Button in stand-by mode to activate the voice dialer of your mobile phone. For this, the voice dialing
function must be available on the mobile phone. Refer to your mobile phone manual for further instruction.
Note:
- If you have two phones connected to your headset and you have an incoming call from the second phone during the call
of the first phone, then you may still receive the call from the second phone. In this case, the call from the first phone is on
waiting mode. If you end a call, then it will automatically guide you to the first phone call.
- If you have a mobile phone and a GPS connected to your headset, you may not be able to listen to the GPS voice
instruction during the phone call.
6.2 Speed Dialing
You can quickly make a phone call by using the voice speed dial menu.
1. To enter into the voice speed dial menu, double tap the Front Button and you will hear a mid-toned single beep and a
voice prompt, “Speed dial”.
2. Move the Joystick up or down navigate between the menus. You will hear prompts for each menu item.
3. Tap the Front Button to select a voice menu among the followings:
(1) Last number redial
(2) Speed dial 1
(3) Speed dial 2
(4) Speed dial 3
(5) Cancel
16
| 10U
4. After selecting the last number redial menu, you will hear a voice prompt, “Last number redial”. Then, to redial the last
phone call number, tap the Front Button.
5. To call one of the speed dials, move the Joystick up or down to navigate between the menus until you hear a voice
prompt, “Speed dial (#)”. Then, tap the Front Button.
6. If you want to exit the speed dial immediately, move the Joystick up or down until you hear voice prompt, “Cancel”, and
tap the Front Button or press the Joystick for 1 second. If you do not press any button within 15 seconds, the 10U will exit
the voice speed dial menu and go back to stand-by mode.
Note:
- Make sure that you connect the mobile phone and the headset to use the speed dial function.
- You need to assign speed dial numbers before using the speed dial (please refer to section 13.1, “Assigning Speed
Dial”).
Answer
Tap Front Button or Press Joystick for 1” or Say “Hello”
End
Tap Front Button or Press Joystick for 2”
Reject
Press Joystick for 2”
Transfer
Press Front Button for 2”
Call
Use phone keypad
Speed Dial
Double tap Front Button
Voice Dial
Tap Front Button
Mobile Phone Call Button Operations
6.3 GPS Navigation
If you pair a Bluetooth GPS to the 10U as described in section 5.2, “Second Mobile Phone Pairing”, you can listen to GPS
instructions wirelessly. Push the Joystick up or down to adjust volume. The GPS voice instruction interrupts intercom
conversation but it is automatically reestablished after the GPS voice instruction ends.
6.4 Sena SR10, Two-Way Radio Adapter
You can use a two-way radio and the 10U Bluetooth intercom simultaneously by using the Sena SR10, a Bluetooth Twoway Radio Adapter (please refer to section 5.2, “Second Mobile Phone Pairing”). Incoming audio from the two-way radio
will not interrupt an intercom conversation but is heard in the background. This is useful when you have an intercom
conversation with a passenger on the back seat and use a two-way radio for group communication with other motorcycle
riders.
17
| 10U
7 STEREO MUSIC
7.1 Bluetooth Stereo Music
The Bluetooth audio device must be paired with the 10U by following the “Bluetooth Stereo Device Pairing” procedures
described in the section 7.1. The 10U supports the audio/Video Remote Control Profile (AVRCP), so if your Bluetooth
audio device also supports the AVRCP, you can use the 10U to remotely control music playback. Not only can you adjust
the volume but you can also use functions such as play, pause, next track and previous track.
1. To play or pause music, press the Joystick for 1 second until you hear a double beep.
2. To adjust the volume, move the Joystick up or down.
3. To track forward or track back, move and hold the Joystick for 1 second left or right.
7.2 Music Sharing
You can start sharing music with an intercom friend using Bluetooth stereo music during a two-way intercom conversation
(please refer to section 8.1, “Two-way Intercom”). When you terminate music sharing, you can go back to the intercom
conversation. To start or terminate sharing music, press the Joystick for 1 second during an intercom conversation until
you hear a double beep. To track forward or track back, move the Joystick left or right.
Note:
- Both you and your intercom friend can remotely control music playback such as track forward and track back.
- Music sharing will be paused when you are using your mobile phone or listening to GPS instructions.
18
| 10U
8 INTERCOM
Please make sure your intercom devices are paired as described in section 5.4, “Intercom Pairing”.
8.1 Two-way Intercom
8.1.1 Starting Two-way Intercom
You can start an intercom conversation with one of any intercom friends by pressing the Joystick for 1 second: Press the
Joystick for 1 second once to intercom with the first intercom friend, press the Joystick for 1 second twice to intercom
with the second intercom friend, and Press the Joystick for 1 second three times to intercom with the third intercom
friend.
8.1.2 Ending Two-way Intercom
To terminate an intercom conversation, press the Joystick for 1 second. Any intercom connection with any intercom friend
will be terminated by a 1 second press. Pressing the Joystick for 1 second twice or three times will do nothing in this case.
8.2 Three-way Intercom
8.2.1 Starting Three-way Intercom
You (A) can have a three-way conference intercom with two other 10U friends (B & C) by establishing two intercom
connections simultaneously. While a three-way conference intercom is in progress, mobile phone connection of all three
participants is temporarily disconnected. However, as soon as the conference intercom terminates or one of the
participants leaves the intercom, all mobile phones automatically reconnect to their headsets. If you have an incoming
mobile phone call during the conference intercom, terminate the conference intercom to automatically reconnect and
receive the phone call.
1. You (A) need to be paired with two other friends (B & C) for three-way conference intercom.
2. Start an intercom conversation with one of the two friends in your intercom group. For example, you (A) may start an
intercom conversation with the intercom friend (B). Or intercom friend (B) may start an intercom call with you (A).
3. The second intercom friend (C) may join the intercom by making an intercom call to you (A).
19
| 10U
4. Now you (A) and two 10U intercom friends (B & C) are having a three-way conference intercom.
8.2.2 Ending Three-way Intercom
You can completely terminate the conference intercom or just disconnect an intercom connection with one of your active
intercom friends.
1. Press the Joystick for 2 seconds until you hear a beep to terminate three-way conference intercom completely. It
terminates both intercom connections with (B) and (C).
2. Press the Joystick for 1 second once or twice to disconnect intercom connection with one of the two intercom friends
accordingly. For example, by pressing the Joystick for 1 second once, you can terminate the intercom connection with just
the first intercom friend (B). However, you still have the intercom connection with your second intercom friend (C).
Joystick Operation
Result
Press for 2”
Disconnect (B) & (C)
Press for 1” once
Disconnect (B)
Press for 1” twice
Disconnect (C)
End Three-way Intercom
8.3 Four-way Intercom
8.3.1 Starting Four-way Intercom
You can have four-way conference intercom with three other 10U users by adding one more intercom participant to the
three-way intercom. While you are having a three-way intercom as above in section 8.2, a new participant (D), who is an
intercom friend of your intercom friend (C), may join the conference intercom by making an intercom call to your intercom
friend (C). Please note that in this case, the new participant (D) is an intercom friend of (C), not of you (A).
8.3.2 Ending Four-way Intercom
As same in the case of three-way intercom, you can completely get out of the four-way conference intercom or just
disconnect a single intercom connection.
20
| 10U
1. Press the Joystick for 2 seconds until you hear a beep to terminate four-way conference intercom. It terminates the
intercom connections between you (A), and your intercom friends (B) and (C).
2. Press the Joystick once or twice to disconnect the intercom connection with one of the two intercom friends accordingly.
However, when you disconnect the second friend (C) by double tapping the Joystick, you will be disconnected with the
third participant (D) as well. This is because the third participant (D) is connected with you via the second friend (C).
Joystick Operation
Result
Press for 2”
Disconnect (B), (C) & (D)
Press for 1” once
Disconnect (B)
Press for 1” twice
Disconnect (C) & (D)
End Four-way Intercom
21
| 10U
9 THREE-WAY
PARTICIPANT
CONFERENCE
PHONE
CALL
WITH
INTERCOM
1. When you have an incoming mobile phone call during an intercom conversation, you will hear a ring tone. You can
choose whether to 1) answer the mobile phone call and stop the intercom conversation, or 2) reject the phone call and
stay on the intercom conversation.
a. To answer the phone call and stop the intercom conversation, press the Joystick for 1 second or the Front Button.
The VOX Phone feature does not work if you are connected to intercom. When you hang up the phone call, the
intercom will automatically be recovered.
b. To reject the phone call and stay on the intercom conversation, press the Joystick for 2 seconds until you hear a
beep.
Unlike other motorcycle Bluetooth headsets, this prevents a user from being dropped out of an intercom conversation by
an incoming mobile call.
2. When you have an incoming intercom call during a mobile phone call, you will hear 4 high toned beeps, alerting you
that there is an incoming intercom call. You will also hear a voice prompt, “Intercom requested”. In this case, the
intercom call does not override the mobile call because intercom has lower priority than mobile call. You have to hang up
the mobile phone call to make or receive an intercom call.
3. You can have a three-way conference phone call by adding an intercom friend to the mobile phone conversation.
During a mobile phone conversation, press the Joystick for 1 second to invite one of the intercom friends to the mobile
phone line. To disconnect the intercom first and go back to your private mobile phone call, terminate the intercom by
pressing the Joystick for 1 second. To end the mobile phone call first and maintain the intercom conversation, press the
Joystick for 2 seconds, or tap the Front Button, or wait for the person on the mobile phone line to end the call.
Press the Joystick for 1 second while having a
Start
mobile phone call
End intercom first
Press the Joystick for 1 second
End phone call first
Press Joystick for 2“
or
Tap Front Button
or
Wait for the called person to end the call
Start & End Three-way Conference Phone Call
22
| 10U
10 UNIVERSAL INTERCOM
You can have an intercom conversation with non-Sena Bluetooth headsets using the Universal Intercom function. NonSena Bluetooth headsets can be connected to the Sena Bluetooth headset if they support the Bluetooth Hands-Free
Profile (HFP). The working distance may differ depending on the performance of Bluetooth headset that it is connected to.
In general, it is shorter than normal intercom distance since it uses the Bluetooth Hands-Free Profile. The Universal
Intercom affects both the phone call connection and the multipoint connection (mostly used for GPS connections for
riders). You cannot use a multipoint connection device while you are using the Universal Intercom in case as below.
1. If a non-Sena headset does not support a multipoint connection, it cannot use a phone call connection while using the
Universal Intercom.
2. As for Sena headsets, the Universal Intercom affects the multipoint connection.
3. If non-Sena headset (already paired as Universal Intercom with Sena) is turned on, then the multipoint connection is
automatically deactivated. And the non-Sena headset is automatically connected to Sena headset as a Universal
Intercom. So you cannot use multipoint connection device such as GPS, while a non-Sena headset is turned on.
4. Even though you disconnect the non-Sena headset as a Universal Intercom, it will not automatically restore the
multipoint connection. To restore the multipoint connection, you should turn off the non-Sena headset first, then try to
connect to multipoint device manually from the device screen or simply reboot the device so that it automatically connects
to the Sena headset.
10.1 Universal Intercom Pairing
The 10U can be paired with non-Sena Bluetooth headsets for Bluetooth intercom conversation. You can pair the 10U with
only one non-Sena Bluetooth headset so if you pair with a different non-Sena Bluetooth headset, the previous pairing will
be removed.
1. Turn on the 10U and a non-Sena Bluetooth headset that you want to pair with.
2. Press and hold the Joystick on the 10U for 8 seconds until the blue LED flashes rapidly. You will hear a voice prompt,
“Universal intercom pairing”.
3. Perform the operation required for handsfree pairing on the non-Sena Bluetooth headset (refer to the User’s Manual of
the headsets you want to use). The 10U will automatically pair with non-Sena Bluetooth headsets in pairing mode.
10.2 Two-way Universal Intercom
You can initiate the Universal Intercom connection with non-Sena Bluetooth headsets using the same intercom
connection method as you would between other Sena headsets. You may press the Joystick for 1 second to begin an
intercom conversation with the first intercom friend, double tap with the second intercom friend, and triple tap with the
third intercom friend.
Non-Sena Bluetooth headsets may initiate the Universal Intercom connection, activating the voice dialing or using the
redialing operation. You may also disconnect the existing connection by ending a call operation function (refer to the
User’s Guide of the headsets for voice dialing, redialing, and ending a call).
23
| 10U
10.3 Three-way Universal Intercom
You may make a three-way Universal Intercom connection with two 10Us and one non-Sena Bluetooth headset. If the
intercom connection is made, all headsets connected cannot use the mobile phone call function since the connection
between the headset and the phone is disconnected temporarily. If you disconnect the intercom call, the mobile phone
connection is made again automatically so that you can use a mobile phone call function.
1. You (A) need to be paired with a non-Sena Bluetooth headset (B) and another 10U headset (C) for the three-way
conference intercom.
2. Start an intercom conversation with non-Sena Bluetooth headset (B) in your intercom group. For example, you (A) may
start an intercom conversation with non-Sena Bluetooth headset (B). The non-Sena Bluetooth headset (B) may also start
an intercom call with you (A).
3. The Other 10U (C) may join the intercom by making an intercom call to you (A).
4. Now you (A), non-Sena Bluetooth headset (B), and the other 10U (C) are having a three-way conference intercom.
24
| 10U
5. You may disconnect three-way Universal Intercom using the same way as you do in normal three-way intercom.
Please refer to section 7.2.2, “End Three-way Intercom”.
10.4 Four-way Universal Intercom
You may make a four-way Universal Intercom connection with a couple of different configurations, 1) three 10Us and one
none-Sena Bluetooth headset or 2) two 10Us and two non-Sena Bluetooth headsets.
You may have a couple of other Four-way Universal Intercom configurations, 1) your headset (A), a non-Sena Bluetooth
headset (B), another 10U (C), and a non-Sena Bluetooth headset (D), 2) your headset (A), a non-Sena Bluetooth headset
(B), and two other 10U headsets (C and D). You may make the four-way Universal Intercom call the same way as a
normal four-way intercom call.
10.4.1 Four-way Universal Intercom Case 1
Two 10U headsets (A and C) and two non-Sena Bluetooth headsets (B and D).
1. You (A) may start an intercom conversation with the non-Sena Bluetooth headset (B).
2. The other 10U (C) may join the intercom by making an intercom call to you (A).
3. The non-Sena Bluetooth headset (D) may join the conference intercom by making an intercom call to the 10U (C).
25
| 10U
4. Now two 10U headsets (A & C) and two non-Sena Bluetooth headsets (B & D) are connected with the four-way
Universal Intercom.
You may disconnect a four-way Universal Intercom using the same way as you do in a normal four-way intercom. Please
refer to section 7.3.2, “End Four-way Intercom”.
10.4.2 Four-way Universal Intercom Case 2
Three 10U headsets (A, C and D) and one non-Sena Bluetooth headset (B)
The procedure is the same as case 1 described in section 11.4.1.
26
| 10U
11 FM RADIO
11.1 FM Radio On/Off
To turn on the FM radio, press the Front Button for 2 seconds until you hear a mid-toned double beep sound. You will
then hear a voice prompt, “FM on”. To turn off the FM radio, press the Front Button for 2 seconds until you hear a voice
prompt, “FM off”. When you power it off, the 10U will remember the last station frequency. When you power it on, the last
station frequency will be playing.
11.2 Preset Stations
You can listen to preset stations while listening to the FM radio. Tap the Front Button once to go upward to your next
saved preset station.
11.3 Seek and Save
“Seek” is the function that searches for station to station frequencies. To use the “Seek” function, please follow the
procedure below:
1. Move and hold the Joystick left or right for 1 second to search down or up the station dial.
2. If the tuner finds a station while searching frequencies, it stops the seek function.
3. To save the current station, press and hold the Joystick for 2 seconds until you hear a voice prompt, “Preset (#)”.
4. Move the Joystick up or down in order to select which preset number you want for that specific station. You can save
up to 10 preset stations. (You may cancel the preset operation by waiting approximately 10 seconds. You will then hear
“Save preset cancelled”. You can also move the Joystick up or down until you hear “Cancel”. Press the Joystick for 1
second to confirm cancellation. You will then hear “Save preset cancelled”).
5. To save the current station, press the Joystick for 1 second again. You will then hear a voice prompt, “Save preset (#)”.
6. To delete the saved station in the preset number, tap the Front Button. You will then hear a voice prompt, “Delete
preset (#)”.
Note:
1. You can save FM stations to presets before using FM radio. Connect the 10U to your PC and open the Sena Device
Manager. It allows you to save up to 10 FM station frequency presets on the 10U settings menu. You may do the same
operation by using the Sena Smartphone App.
2. You can still answer an incoming phone call and intercom while listening to the FM radio.
11.4 Scan and Save
“Scan” is the function that automatically searches station frequencies, starting from the current frequency and up. To use
the scan function, please follow the procedures below:
1. Double tap the Front Button. Then the current station frequency moves upward to find other station frequencies.
2. If the tuner finds a station, it stays at the station frequency for 8 seconds, then scanning to the next station frequency.
3. Scan function stops when you double tap the Front Button again.
27
| 10U
4. To save a station while scanning frequencies, tap the Front Button when at that station. You will hear a voice prompt
from the 10U, “Save preset (#)”. The station will be saved as the next preset number.
5. All stations preset during “Scan”, will overwrite previously set stations.
11.5 Temporary Preset
With the temporary preset function, you may temporarily preset stations automatically without changing the existing
preset stations. Tap the Front Button three times to automatically scan for 10 temporary preset stations. The temporary
preset stations will be cleared when the system is powered off.
11.6 Region Selection
You can select the proper FM frequency region from the Sena Device Manager. With the region setting, you may optimize
the seek function to avoid unnecessary frequency ranges (Factory default: worldwide).
Region
Frequency range
Step
Worldwide
76.0 ~ 108.0 MHz
± 100 kHz
Americas
87.5 ~ 107.9 MHz
± 200 kHz
Asia
87.5 ~ 108.0 MHz
± 100 kHz
Australia
87.5 ~ 107.9 MHz
± 200 kHz
Europe
87.5 ~ 108.0 MHz
± 100 kHz
Japan
76.0 ~ 90.0 MHz
± 100 kHz
28
| 10U
12 FUNCTION PRIORITY
The 10U operates in the following order of priority:
(highest)
Mobile phone
Intercom
FM Radio
(lowest)
Bluetooth stereo music
A lower priority function is always interrupted by a higher priority function. For example, stereo music is interrupted by
intercom call, and an intercom conversation is interrupted by an incoming mobile phone call.
29
| 10U
13 CONFIGURATION SETTING
You can set the configuration of the 10U by the voice menu instruction described below.
1. To enter into voice configuration menu, press and hold the Joystick for 12 seconds until the LED shows solid blue and
you hear high toned double beeps. You will also hear a voice prompt, “Configuration menu”.
2. Move the Joystick up or down to navigate between the menus. You will hear voice prompts for each menu item as
below.
3. You can enable the feature or execute the command by tapping the Front Button, or disable the feature by tapping the
Joystick.
4. If any button is not pressed within 10 seconds, the 10U will exit the configuration and go back to stand-by mode.
5. If you want to exit the configuration immediately, move the Joystick up or down until you hear a voice prompt, “Exit
configuration”, and tap the Front Button.
The voice prompt for each menu item is as below:
(1) Speed dial
(2) VOX phone
(3) VOX intercom
(4) Voice prompt
(5) RDS AF setting
(6) Sidetone
(7) Noise control
(8) Delete all pairings
(9) Factory reset
(10) Remote Control Pairing
(11) Exit configuration
30
| 10U
13.1 Assigning Speed Dial
Voice Prompt
"Speed dial"
Factory Default
N/A
Execute
Tap the Front Button
1. To assign a phone number as a speed dial, move the Joystick up or down until you hear a voice prompt, “Speed dial”.
2. Tap the Front Button, and you will hear a voice prompt, “Speed dial one” and “Phone connected”.
move the Joystick up or down to select one of three speed dial numbers by hearing voice prompts, “Speed dial
(#)”.
3. Call a phone number you want to assign and you will hear a voice prompt, “Save speed dial (#)”. The phone number is
automatically assigned to the selected speed dial number. Then the phone call will hang up immediately.
4. To exit the menu, move the Joystick up or down until you hear a voice prompt, “Cancel”, and tap the Front Button to
confirm. You will then hear a voice prompt “Cancel”. If any button is not pressed within 1 minute, the 10U will exit the
configuration menu and go back to stand-by mode.
Note:
- After assigning a phone number to one of three speed dials, you can continually assign another phone number to the
reset of two speed dials.
- You can also assign phone numbers for speed dialing by using the Sena Device Manager software or the Sena
Smartphone App. Please visit the Sena Bluetooth website at www.sena.com for more information.
13.2 Enabling/Disabling Voice Activated Phone Answering
Voice Prompt
“VOX phone”
Factory Default
Enable
Enable
Tap the Front Button
Disable
Press the Joystick for 1 second
If this feature is enabled, you can answer incoming calls by voice. When you hear a ringtone for an incoming call, you can
answer the phone by saying a word such as “Hello” loudly or by blowing air into the microphone. VOX Phone is
temporarily disabled if you are connected to intercom. If this feature is disabled, you have to press the Joystick for 1
second or the Front Button to answer an incoming call.
31
| 10U
13.3 Enabling/Disabling Voice Activated Intercom
Voice Prompt
“VOX intercom”
Factory Default
Disable
Enable
Tap the Front Button
Disable
Press the Joystick for 1
second
If this feature is enabled, you can initiate an intercom conversation with the last connected intercom friend by voice. When
you want to start intercom, say a word such as “Hello” loudly or blow air into the microphone. If you start an intercom
conversation by voice, the intercom terminates automatically when you and your intercom friend remain silent for 20
seconds. However, if you manually start an intercom conversation by pressing the Joystick for 1 second, you have to
terminate the intercom conversation manually.
However, if you start intercom by voice and end it manually by pressing the Joystick for 1 second, you will not be able to
start intercom by voice temporarily. In this case, you have to press the Joystick for 1 second to restart the intercom. This
is to prevent repeated unintentional intercom connections by strong wind noise. After rebooting the 10U, you can start
intercom by voice again.
13.4 Enabling/Disabling Voice Prompts
Voice Prompt
“Voice prompt”
Factory Default
Enable
Enable
Tap the Front Button
Disable
Press the Joystick for 1 second
You can disable voice prompts by configuration setting, but the following voice prompts are always on.
- Voice prompts for configuration setting menu
- Voice prompts for battery level indicator
- Voice prompts for factory reset
- Voice prompts for speed dial
- Voice prompts for FM radio functions
13.5 Enabling/Disabling RDS AF
Voice Prompt
“RDS AF setting”
32
| 10U
Factory Default
Disable
Enable
Tap the Front Button
Disable
Press the Joystick for 1 second
RDS AF allows a receiver to re-tune to the second frequency location when the first signal becomes too weak. With RDS
AF enabled on the receiver, a radio station with more than one frequency can be used.
13.6 Enabling/Disabling Sidetone
Voice Prompt
“Sidetone”
Factory Default
Disable
Enable
Tap the Front Button
Disable
Press the Joystick for 1 second
Sidetone is audible feedback of your own voice. It helps you to naturally speak at the correct level according to varying
helmet noise conditions. If this feature is enabled, you can hear what you are speaking during an intercom conversation
or a phone call.
13.7 Enabling/Disabling Advanced Noise Control™
Voice Prompt
"Noise control"
Factory Default
Enable
Enable
Tap the Front Button
Disable
Press the Joystick for 1 second
When Advanced Noise Control is enabled, the background noise is reduced during an intercom conversation. When it is
disabled, the background noise is mixed with your voice during intercom.
Note:
If you use your 10U with the Bluetooth Audio Pack for GoPro, you can enable or disable this feature only during Normal
Audio Recording Mode. This feature is automatically disabled while in Ultra HD (UHD) Audio Mode.
13.8 Delete All Bluetooth Pairing Information
33
| 10U
Voice Prompt
“Delete all pairings”
Factory Default
Execute
N/A
Tap the Front Button
To delete all Bluetooth pairing information of the 10U, move the Joystick up or down until you hear a voice prompt,
“Delete all pairings”, and tap the Front Button to confirm.
13.9 Factory Reset
Voice Prompt
“Factory reset”
Factory Default
Execute
N/A
Tap the Front Button
To restore factory default settings on the 10U, move the Joystick up or down until you hear a voice prompt, “Factory
reset”, and tap the Front Button to confirm.
13.10 Remote Control Pairing
Voice Prompt
“Remote control pairing”
Factory Default
N/A
To enter into Remote Control Pairing mode, press the (+) Button until you hear a voice prompt, “Remote control pairing”.
Please refer to section 4.3, “Pairing the Headset with the Handlebar Remote” for more information. Press the (+) Button
once more to exit from the pairing mode.
Note:
You can only enter the Remote Control Pairing mode using the control buttons on the headset.
13.11 Exit Voice Configuration Menu
Voice Prompt
Factory Default
“Exit configuration”
N/A
34
| 10U
Execute
Tap the Front Button
To exit voice configuration menu and get back to stand-by mode, move the Joystick up or down until you hear a voice
prompt, “Exit configuration”, and tap the Front Button to confirm.
Move Joystick Up/Down
Tap Front Button
Press Joystick for 1
sec
Speed Dial
Execute
N/A
VOX Phone
Enable
Disable
VOX Intercom
Enable
Disable
Voice Prompt
Enable
Disable
RDS AF Setting
Enable
Disable
Sidetone
Enable
Disable
Advanced Noise Control
Enable
Disable
Delete All Pairings
Execute
N/A
Factory Reset
Execute
N/A
Remote Control Pairing
N/A
N/A
Exit Configuration
Execute
N/A
Voice Configuration Menu & Button Operations
35
| 10U
14 FIRMWARE UPGRADE
The 10U supports firmware upgrades. You can update the firmware using the Sena Device Manager (please refer to
section 4.7.1, “Sena Device Manager”). Please visit Sena Bluetooth website at www.sena.com to check the latest
software downloads.
36
| 10U
15 TROUBLESHOOTING
15.1 Intercom Failure
When you try to start an intercom conversation with an intercom friend who is unavailable within range or already having
a conference intercom with other riders or a mobile phone call, you will hear a low tone double beep signifying an
intercom busy signal. In this case, you have to try again later.
15.2 Intercom Reconnection
If your intercom friend goes out of range while having an intercom conversation, you may hear static noise and eventually
the intercom will be disconnected. In this case, the 10U automatically tries to reconnect the intercom every 8 seconds and
you will hear high tone double beeps until the intercom is reestablished. If you do not want to make a reconnection, press
the Joystick for 1 second to stop the attempt.
15.3 Fault Reset
When the 10U is not working properly or is in faulty status for any reason, you may reset by pushing the pin-hole reset
button at the front of the left speaker. Insert a paper clip into the reset pin-hole and press the reset button for a second
with light pressure. The 10U will be switched off. Restart the system and try again. This will not restore the headset to
factory default settings.
15.4 Factory Reset
1. To restore the 10U to factory default settings, press and hold the Front Button for 12 seconds until the LED shows solid
red and you hear “Factory reset”.
2. Within 5 seconds, press the Joystick for 1 second to confirm reset. The headset will be restored to factory setting and
switched off automatically. You will hear “Headset reset, good-bye”.
3. If you press the Front Button or leave the Joystick for 10 seconds, the reset attempt is cancelled and the headset
returns to stand-by mode. You will hear a voice prompt, “Cancelled”.
37
| 10U
17 OPERATION QUICK REFERENCE
17.1 Using the Handlebar Remote
Type
Handlebar Remote
Basic Function
Function
Button Command
LED
Beep
Power on
Tap the Front Button
Solid blue
Power off
Press the Front Button and the
Rear Button for 2 seconds
Flash red
Factory Reset
Press the Front Button, the Rear
Button, and the Joystick for 1
second
Solid red
Volume adjustment
Move the Joystick up or down
Mobile phone pairing
Press the Front Button for 5
seconds
Blue & red
alternatively
flashing
High tone multiple
beeps
Press the Joystick for 5 seconds
Red flashing
Multiple beeps
Second mobile
phone pairing
Tap the Front Button within 2 seconds
Call transfer
Press the Front Button for 2
seconds
High tone single
beep
Answer & end phone
call
Tap the Front Button or press the
Joystick for 1 second
Voice dial
Tap the Front Button
Speed dial
Double Tap the Front Button
Mid-tone single
beep
Reject incoming call
Press the Joystick for 2 seconds
Press the Joystick for 5 seconds
Red flashing
Mid-tone single
beep
Mobile Phone
Intercom
Intercom pairing
Press the Joystick for 1 second of any one of the two headsets
Start / End each
intercom
Press the Joystick for 1 second
End all intercoms
Press the Joystick for 2 seconds
Blue flashing
Mid-tone double
beeps
38
| 10U
Music
FM radio
Play/Pause
Bluetooth music
Press the Joystick for 2 seconds
Mid-tone double
beep
Track forward/back
Move and hold the Joystick left or
right for 1 second
FM radio on
Press the Front Button for 2
seconds
Mid-tone double
beeps
FM radio off
Press the Front Button for 2
seconds
Mid-tone double
beeps
Mid-tone single
beep
High tone triple
beeps
Select preset
Tap the Front Button
Seek stations
Move the Joystick left and right for
1 second
Scan up FM band
Double tap the Front Button
Stop scanning
Save preset while
scanning
Double tap the Front Button
Tap the Front Button
High tone double
beeps
High tone double
beeps
17.2 Using the Headset Buttons
Type
Basic Function
Function
LED
Beep
Power on (headset)
Press the (+) Button and the (-)
Button for 1 second
Solid blue
Ascending beeps
Power off (headset)
Press the (+) Button and the (-)
Button
Solid red
Descending beeps
Volume adjustment
Press the (+) Button or the (-) Button
Mobile phone pairing
Mobile Phone
Button Command
Second
mobile
phone pairing
Press the
seconds
(-)
Button
for
10
Press the
seconds
(-)
Button
for
10
Blue & red
alternatively
flashing
High tone multiple
beeps
Red flashing
Multiple beeps
Tap the (+) Button
Answer & end phone
call
Tap the (+) Button
Voice dial
Press the (+) Button for 3 seconds
39
| 10U
Speed dial
Press the (-) Button for 3 seconds
Mid-tone
beep
Reject incoming call
Press the (-) Button for 2 seconds
Press the (-) Button for 5 seconds
Red flashing
Mid-tone
beep
single
Red flashing
Mid-tone
beep
single
Intercom
single
Intercom pairing
Tap the (-) Button
Press the (-) Button for 5 seconds
Universal
pairing
Music
FM radio
intercom
Tap the (+) Button
End all intercoms
Press the (-) Button for 1 second
Blue flashing
Mid-tone
beeps
double
Play/Pause
Bluetooth music
Press the (+) Button for 1 second
Mid-tone
beep
double
Track forward/back
Press the (+) Button or the (-) Button for 2 seconds
FM radio on
Press the (+) Button for 5 seconds
FM radio off
Press the (+) Button for 5 seconds
Select preset
Press the (+) Button for 1 second
Configuration
Reset
Mid-tone
beeps
double
Mid-tone
beeps
double
Mid-tone
beep
single
Seek stations
Press the (+) Button or the (-) Button for 3 seconds
Scan up FM band
Press the (-) Button for 5 seconds
Stop scanning
Press the (-) Button for 5 seconds
Save preset
scanning
while
Enter
configuration
settings mode
into
Fault reset
Press the (+) Button for 1 second
Press the
seconds
(+)
Button
Press the Reset Button
40
for
10
High tone
beeps
triple
High tone double
beeps
High tone double
beeps
High tone double
beeps
| 10U
CERTIFICATION AND SAFETY APPROVALS
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try
to correct the interference by one or more of the following measures:
 Reorient or relocate the receiving antennae
 Increase the separation between the equipment and the receiver
 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
FCC RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must
follow the specific operating instructions for satisfying RF exposure compliance. The antenna used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures.
FCC Caution
Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could
void user’s authority to operate the equipment.
CE Declaration of Conformity
This product is CE marked according to the provisions of the R&TTE Directive (99/5/EC). Hereby, Sena declares that this
product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further
information, please consult www.sena.com. Please note that this product uses radio frequency bands not harmonized
within EU. Within the EU this product is intended to be used in Austria, Belgium, Denmark, Finland, France, Germany,
Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom and within EFTA in
Iceland, Norway and Switzerland.
Industry Canada Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
41
| 10U
Bluetooth License
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under
license. Other trademarks and trade names are those of their respective owners.
The product is compliant with and adopts the Bluetooth Specification 3.0 and has successfully passed all interoperability
tests that are specified in the Bluetooth® specification. However, interoperability between the device and other Bluetooth enabled products is not guaranteed.
®
®
®
WEEE (Waste Electrical and Electronic Equipment)
The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical and electronic
products, batteries, and accumulators must be taken to separate collection at the end of their working life. This
requirement applies to the European Union and other locations where separate collection systems are available. To
prevent possible harm to the environment or human health from uncontrolled waste disposal, please do not dispose of
these products as unsorted municipal waste, but hand it in at an official collection point for recycling.
SAFETY INFORMATION
Please ensure that the product is properly used by observing the warnings and cautions below to prevent any risk and/or
damage to property.
Product Storage and Management






Keep the product free of dust. It may damage mechanical and electronic parts of the product.
Do not store the product in high temperatures as this may reduce the life span of electronic devices, damage the
battery, and/or melt plastic parts of the product.
Do not store the product in cold temperatures. Abrupt changes in temperatures may cause condensation and
damage electronic circuits. Do not clean the product with cleaning solvents, toxic chemicals, or strong detergents
as this may damage the product.
Do not paint the product. Paint may obstruct moving parts or interfere with the normal operation of the product.
Do not drop or otherwise shock the product. It may damage the product or its internal electronic circuits.
Do not disassemble, repair or modify the product as this may damage the product and invalidate the product
warranty.
Product Use
42
| 10U













In some regions, it is prohibited by law to ride motorcycles or bicycles while wearing headsets. Therefore be certain
to comply with all relevant laws in the region before using the product.
Use of the product at a high volume for a long period of time may damage your eardrums or hearing ability. Keep
the volume at a modest level.
Do not cause impact to the product or touch it with sharp tools as this may damage the product.
Do not use the product in high-temperatures or apply heat to the product as this may cause damage, explosion, or
fire.
Keep the product dry and away from water. It may damage the product.
Keep product away from pets or small children. It may damage the product or cause accidents.
Do not use the product near a microwave oven or a wireless LAN device as this may cause malfunction or
interference with the product.
In any place where wireless communication is prohibited, such as hospitals or airplanes, turn off the power and
refrain from using the product. In a place where wireless communication is prohibited, electromagnetic waves may
cause hazards or accidents.
Do not use the product near hazardous explosives. When there are near any explosion hazards, turn off the power
and heed any regulations, instructions, and signs in the area.
When using the product, drive at a low speed (slower than 35km/h) for safety. In addition, be certain to conform to
laws regarding the use of communications devices while driving.
Do not put the product where it may hamper the driver's vision or manipulate it while driving. This may cause traffic
accidents.
Before driving, fasten the product to the helmet, and double-check that it is fastened. Separation of the product
while driving may cause damage to the product or accidents.
If the product is damaged, stop using it immediately. It may cause damage, explosion, or fire.
Battery
This product has an irreplaceable rechargeable battery inside. Therefore, when using the product, make sure to adhere to
the following:
 Never separate the battery from the product as this may damage the product.
 The battery performance may be reduced over time with usage.
 In recharging the battery, make sure to use an approved charger provided by the manufacturer. Use of a nonapproved charger may cause fire, explosion, leakage, and other hazards may also reduce the life time or
performance of the battery.
 Store the battery at temperatures of 15°C~25°C (59°F~77°F). Higher or lower temperatures may reduce the
capacity and life of the battery, or may cause temporary non-operation. Do not use the product in sub-zero
temperature, because it may cause serious reduction of the battery performance.
 If you apply heat to the battery or throw it into fire, it may explode.
 Do not use the product with a damaged battery. It may explode and/or cause accidents.
 Never use a damaged charger. It may explode and/or cause accidents.
 Battery life may vary depending on conditions, environmental factors, functions of the product in use, and devices
used with it.
PRODUCT WARRANTY AND DISCLAIMER
Limited Warranty
Limited Warranty
Sena Technologies, Inc. (“Sena”) guarantees the product quality based on the technical specification stated in the product
manual, and data regarding product warranty. Here, product warranty extends to the product only. Sena will not be liable
for any loss, damage of human life, or loss of property which may result from using the product beyond defective parts or
flaws that occur due to problems in manufacture.
43
| 10U
Warranty Period
Sena guarantees free-of-charge replacements of defective parts of the product or flaws that may have occurred due to
problems in manufacture for a period of 2 years from the date of initial purchase.
Termination
Quality warranty of the product becomes effective on the date of initial purchase. In addition, the quality warranty of the
product expires when the warranty period expires. However, in the following cases, the warranty will be terminated
prematurely.
 In the event the product has been sold or transferred to a third party.
 In the event the manufacturer's name, serial number, product label, or other markings have been modified or
removed.
 In the event any unauthorized person has tried to disassemble, repair, or modify the product.
Notice and Waiver
By buying and using this product, you relinquish considerable legal rights including any claim for compensation for
damages. Therefore, be certain to read and understand the following terms and conditions before using the product. Use
of this product will constitute consent to this agreement, and forfeiture of rights to all claims. If you do not consent to all
the terms and conditions of this agreement, return the product for a refund. (Refer to the section "Return for Full Refund".)
1. You agree that you, your descendants, legal proxies, successors, or transferees will not raise permanent volitional
request for any suit, claim, implementation, redemption or similar action from Sena with regard to any occasion such
as difficulty, pain, suffering, inconvenience, loss, injury, or death which may occur to you or a third party during the
use of this product.
2. You must completely understand and accept all risks (including those occurring due to any careless behavior of
yours or others) which may occur during the use of this product.
3. You are responsible for ensuring that your medical condition permits usage of the product and that you are in
sufficient physical condition for using any device which can be used with it. In addition, you must ensure that the
product does not limit your abilities and that you are able to use it safely.
4. You must be an adult who can take responsibilities for using the product.
5. You must read and understand the following warnings and alerts:
 Sena; together with employees, managers, partners, subsidiaries, representatives, agents, supporting firms and
suppliers, sole sellers of Sena (collectively referred to as "the company") recommend that, before using the
product and similar devices of any brands including its derivative models, you collect any relevant information in
advance and be entirely prepared in terms of weather, traffic situation, and road conditions.
 When you use the product while you operating any vehicle or equipment such as motorcycles, scooters, mopeds,
ATVs, or quad-bikes (hereinafter called as "transportation means"), you must take complete caution regardless of
the location of such operation.
 Use of the product on the road may cause such risks as fracture, serious disability, or death.
 Risk factors, which may occur when you use the product, may be due to errors of the manufacturer, its agents, or
third parties which are involved in the manufacturing.
 Risk factors, which may occur when you use the product, may be unforeseeable. Therefore, you must take full
responsibility for any damage or loss caused by all risk factors which may occur when using the product.
 When you use the product, use good judgment; never use it under the influence of alcohol.
6. You must read and completely understand all terms and conditions of legal rights and warnings that are involved in
using the product. In addition, usage of the product constitutes acceptance of all terms and conditions regarding
waiver of rights.
Warranty Exclusions
Reasons for Limited Liabilities
If you do not return the product after purchasing it, you relinquish all rights to liabilities, loss, claims, and claims for
reimbursement of expenses (including attorney's fees). Therefore, Sena will not be liable for physical injury, death, or any
loss or damage of transportation means, possessions, or assets which belong to you or third parties that may have
occurred while you use the product. Further, Sena will not be liable for any substantial damage not related to the,
condition, environment, or malfunction of the product. All risks related with the operation of the product depend entirely on
the user regardless of its use by the initial purchaser of a third party.
44
| 10U
Use of this product may violate local or national laws. In addition, be aware once again that correct and safe use of the
product is entirely your responsibility.
Limitation of Liability
TO THE FULL EXTENT ALLOWED BY LAW, SENA EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY,
WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL,
INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF
BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN
CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR
INTERRUPTION OF ITS PRODUCTS, EVEN IF SENA OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF
THE PURCHASE PRICE PAID, AT SENA’S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE
AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. IN ANY CASE, THE
TOTAL COMPENSATION LIABILITIES OF SENA OR ITS SALES AGENTS SHALL NOT EXCEED THE PRICE PAID
FOR THE PRODUCT BY THE PURCHASER.
Liabilities Disclaimer
In addition to damages which may occur due to the use of the product, Sena will not be liable for damages of the product
which occur due to the following events.
In the event the product is misused or used for purposes other than its intended purposes.
In the event the product is damaged because the user does not follow the content of the product manual.
In the event the product is damaged because it has been left unattended or has undergone any other accident.
In the event the product is damaged because the user has used any parts or software which are not provided by the
manufacturer.
In the event the product is damaged because the user has disassembled, repaired, or modified it in such way as is not
explained in the product manual.
In the event the product is damaged by a third party.
In the event the product is damaged due to Acts of God (including fire, flood, earthquake, storm, hurricane or other
natural disaster).
In the event the surface of the product is damaged by use.
Warranty Service
To obtain product warranty service, send the defective product, at your expense, to the manufacturer or the seller along
with proof of purchase (a receipt that shows the purchase date, a product registration certificate of the Website, and other
relevant information). Take necessary measures to protect the product. In order to get a refund or replacement, you must
include the whole package as it was purchased.
Free-of-charge Service
Sena will provide free-of-charge repair or replacement service for the product when product defects occur within the
scope of the product warranty during the warranty period.
Charged Service
Sena will provide charged repair or replacement service for the product when the product warranty period has been
expired or when the product damage is beyond the scope of the product warranty. For further information on charged
service, you may contact the service center of Sena.
Return for Full Refund
Should you not agree to the terms and conditions explained above, you may return the product for a full refund. To get a
refund, within 14 days from the purchase date you must return the product to the seller in such a condition as it was
purchased.
45
| 10U
Unless you return the product within 14 days from the purchase date, you will have read and agreed to all the terms and
conditions explained above, and Sena will not be liable for any claim for damages related with the product.
CERTIFICATION ET HOMOLOGATION EN TERMES DE SÉ CURITÉ
Déclaration de conformité FCC
Cet appareil est en conformité avec la partie 15 de la réglementation FCC. L'exploitation est autorisée aux deux
conditions suivantes :
(1) Cet appareil ne doit pas créer d’interférences préjudiciables et
(2) Cet appareil doit accepter toutes les interférences reçues, y compris celles qui pourraient entraver son bon
fonctionnement.
Ce matériel a été testé et déclaré en conformité avec les limites d'un appareil numérique de Classe B, suivant la partie 15
de la réglementation FCC. Ces limites sont destinées à assurer une protection raisonnable contre les interférences
préjudiciables dans un environnement résidentiel. Ce matériel génère, utilise et peut dégager de l’énergie en radio
fréquence et, s’il n’est pas installé et utilisé en conformité avec les instructions, peut provoquer des interférences
préjudiciables avec les communications radio. Cependant, il n’y a aucune garantie que des interférences ne se produiront
pas dans des installations particulières. Si ce matériel provoque des interférences préjudiciables à une réception radio ou
TV, ce qui peut être déterminé en allumant puis en éteignant l'appareil, il est vivement recommandé à l'utilisateur
d'essayer de mettre un terme à ces interférences en prenant l'une des mesures suivantes :
Réorienter ou repositionner l'antenne réceptrice Augmenter la séparation entre le matériel et le récepteur.
Connecter le matériel à une sortie sur un circuit différent de celui sur lequel le récepteur est connecté.
Contacter le revendeur ou un technicien radio/TV expérimenté pour une assistance.
Énoncé FCC sur l’exposition aux radiations RF :
Cet équipement est conforme aux réglementations FCC d’exposition aux radiations définies pour un environnement non
contrôlé. Les utilisateurs suivront les instructions d’exploitation spécifiques pour répondre aux exigences de conformité
sur l’exposition aux RF. L’antenne utilisée pour cet appareil ne doit pas fonctionner en même temps qu’une autre antenne
ou émetteur, sauf s'il y a conformité avec les procédures FCC des produits multi-émetteurs.
Précautions FCC
Tout changement ou modification apporté au matériel qui n’aurait pas été approuvé par le responsable de la conformité
pourrait invalider le droit de l’utilisateur à faire fonctionner ce matériel.
Déclaration de conformité CE
46
| 10U
Ce produit porte un marquage CE, conformément aux dispositions de la directive R&TTE (99/5/CE). Sena déclare par la
présente que ce produit est conforme aux exigences principales et autres dispositions correspondantes de la directive
1999/5/CE. Pour plus d’informations, veuillez consulter le site www.senabluetooth.fr. Veuillez noter que ce produit utilise
des bandes de radio fréquence non uniformisées au sein de l’Union Européenne. Au sein de l’Union Européenne, ce
produit est destiné à être utilisé en Autriche, Belgique, Danemark, Finlande, France, Allemagne, Grèce, Irlande, Italie,
Luxembourg, Pays-Bas, Portugal, Espagne, Suède et Royaume-Uni et au sein de l’AELE, en Islande, Norvège et Suisse.
Déclaration de conformité IC (Industrie Canada)
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) Cet appareil ne doit pas créer d'interférences.
(2) Cet appareil doit accepter toutes les interférences reçues, y compris celles qui pourraient entraver son bon
fonctionnement.
Licence Bluetooth
La marque et les logos Bluetooth® sont la propriété de Bluetooth SIG, Inc et toute utilisation de ces marques par Sena
s'effectue sous licence. D’autres marques et appellations commerciales sont celles de leurs propriétaires respectifs. Le
produit est conforme à et suit la spécification Bluetooth® 3.0 et a réussi tous les tests d'interopérabilité mentionnés dans
la spécification Bluetooth® . Cependant, l'interopérabilité entre l'appareil et d'autres produits Bluetooth® n'est pas garantie.
WEEE(DEEE:Déchets d'équipements électriques et électroniques)
Le symbole poubelle barrée figurant sur le produit, la documentation ou l’emballage signifie que tous les produits
électriques et électroniques, les batteries et les accumulateurs doivent être conduits en fin de vie dans une structure de
récupération et de recyclage séparée. Cette exigence s’applique à l’Union Européenne mais aussi aux autres pays o
des systèmes de récupération et de recyclage séparés existent. Pour prévenir toutes les conséquences possibles pour
l’environnement ou la santé d’une élimination de déchets non con- trôlée, veuille ne pas considérer ces produits comme
des déchets mé- nagers, mais vous rendre dans une structure de récupération officielle pour le recyclage.
INFORMATI N
Veuille vous assurer que le produit est utilisé de manière adéquate en respectant les avertissements et précautions
énumérés ci-dessous pour éviter tout risque et/ou dommage matériel.
Rangement du produit et manipulation
47
| 10U
Garder le produit à l'abri de la poussière. Cela pourrait endommager les pièces mécaniques et électroniques du produit.
Ne pas ranger le produit dans des ones chaudes car cela pourrait réduire la durée de vie des appareils électroniques,
endommager la batterie et/ou faire fondre les pièces en plastique du produit.
Ne pas stocker l'appareil dans des ones froides. Des changements de températures brusques peuvent former de la
condensation et endommager les circuits électroniques. Ne pas nettoyer le produit avec des solvants de nettoyage, des
produits chimiques toxiques ou des détergents puissants car cela pourrait endommager le produit.
Ne pas peindre le produit. La peinture pourrait obstruer les pièces amovibles ou interférer avec le fonctionnement normal
du produit.
Ne pas laisser tomber ou cogner l'appareil. Cela pourrait endommager le produit ou ses circuits électroniques internes.
Ne pas démonter, réparer ou modifier le produit car cela pourrait endommager le produit et annuler la garantie du produit.
Utilisation du produit
●
Dans certaines régions, la loi interdit le port d'écouteurs en étant à moto ou à vélo. Assure -vous donc de
respecter toutes les lois correspondantes dans la région avant d'utiliser le produit.
●
L'utilisation du produit à volume élevé pendant une période prolongée peut endommager les tympans ou la
capacité auditive. Garder le volume sonore à un niveau modéré.
●
Ne pas heurter le produit ou le toucher avec des outils tranchants car cela pourrait l'endommager.
●
Ne pas utiliser le produit dans des zones chaudes ou chauffer le produit car cela pourrait occasionner des
dommages ou provoquer une explosion ou un incendie.
●
Garder le produit au sec et à l'abri de l'eau. Cela pourrait endommager le produit.
●
Tenir le produit hors de portée des animaux ou jeunes enfants. Cela pourrait endommager le produit ou
provoquer des accidents.
●
Ne pas utiliser le produit près d'un four à micro-ondes ou d'un appareil LAN sans fil car cela pourrait provoquer
un dysfonctionnement ou des interférences avec le produit.
●
teindre et ne pas utiliser pas le produit dans les endroits o les communications sans fil sont interdites comme
les hôpitaux ou les avions. Les ondes électromagnétiques peuvent entra ner des risques ou des accidents dans
ces endroits.
●
Ne pas utiliser le produit près d'explosifs. En cas de risques d'explosion à proximité, éteindre le produit et
respecter toute réglementation, instruction ou panneau présent dans la one.
●
Pour des raisons de sécurité, conduire à faible vitesse (inférieure à 35 km/h) pendant l'utilisation du produit.
S'assurer en outre de respecter les lois concernant l'utilisation des appareils de communication lors de la
conduite.
●
Ne pas mettre le produit à un endroit o
il pourrait entraver le champ de vision du conducteur et ne pas le
manipuler durant la conduite. Cela pourrait causer des accidents de la route.
●
Avant de conduire, attacher le produit au casque et s'assurer qu'il est bien fixé. Le retrait du produit durant la
conduite peut provoquer des dommages au produit ou des accidents.
●
Si le produit est endommagé, arrêter immédiatement de l'utiliser. Cela pourrait entra ner des dommages, une
explosion ou un incendie.
48
| 10U
Batterie
●
Ce produit contient une batterie rechargeable irrempla able à l'intérieur. S'assurer par conséquent lors de
l'utilisation du produit de respecter ce qui suit :
●
Ne jamais séparer la batterie du produit car cela pourrait endommager le produit.
●
Les performances de la batterie peuvent s'altérer au fur à et mesure de son utilisation.
●
Pendant le chargement de la batterie, s'assurer d'utiliser un chargeur agréé fourni par le fabricant. Utiliser un
chargeur non agréé peut entra ner un incendie, une explosion, une fuite et d'autres risques et peut également
réduire la durée de vie ou les performances de la batterie.
●
Conserver la batterie à des températures entre 15 C et 25 C. Des températures supérieures ou inférieures
peuvent réduire la capacité et la durée de vie de la batterie ou empêcher momentanément l'utilisation de celle-ci.
Ne pas utiliser le produit en cas de températures en dessous de éro car cela pourrait causer une réduction
significative des performances de la batterie.
●
Chauffer la batterie ou la jeter au feu peut provoquer son explosion.
●
Ne pas utiliser le produit avec une batterie endommagée. Il pourrait exploser et/ou causer des accidents.
●
Ne jamais utiliser un chargeur endommagé. Il pourrait exploser et/ou causer des accidents.
●
La durée de vie de la batterie dépend des conditions, des facteurs environnementaux, des fonctions en cours
d'utilisation du produit et des appareils utilisés conjointement.
arantie limitée
arantie limitée
Sena Technologies, Inc. (« Sena ») garantit la qualité du produit sur la base des caractéristiques techniques énoncées
dans le manuel du produit et les données concernant la garantie du produit. La garantie du produit s'étend ici seulement
au produit. Sena n'est pas responsable des pertes, blessures aux personnes ou pertes de propriétés qui pourraient
résulter de l'utilisation du produit en dehors des pièces défectueuses ou des défauts survenant en raison de problèmes
lors de la fabrication.
ériode de garantie
Sena garantit le remplacement sans frais des pièces défectueuses du produit ou des défauts ayant pu survenir en raison
de problèmes lors de la fabrication pour une période de deux ans à compter de la date d'achat initiale
FIN DE LA GARANTIE
La garantie de qualité du produit prend effet le jour de l'achat initial. De plus, la garantie de qualité du produit expire
lorsque la période de garantie expire. Dans les cas suivants toutefois, la garantie prendra fin avant terme.
Dans le cas o le produit a été vendu ou transféré à un tiers.
Dans le cas o le nom, le numéro de série, l'étiquette du produit ou d'autres marquages du fabricant ont été modifiés ou
supprimés.
Dans le cas o une personne non autorisée a tenté de démonter, réparer ou modifier le produit.
49
| 10U
Avis et renonciation
En achetant et en utilisant ce produit, vous renonce
à des droits légaux importants y compris les demandes
d'indemnisation pour dommages. En conséquence, assure -vous de lire et de comprendre les conditions suivantes avant
d'utiliser le produit. L'utilisation de ce produit constitue un consentement au présent accord et un renoncement aux droits
à toute indemnisation. Si vous ne consente pas à toutes les conditions du présent accord, renvoye le produit pour un
remboursement. (Reporte -vous à la section
Renvoi pour remboursement total .)
1. Vous convene que vous, vos descendants, représentants légaux, héritiers, ou cessionnaires ne fere de votre propre
gré et, de manière permanente, de demande de procès, d'indemnisation, d'exécution, de rachat ou toute action similaire
à l'encontre de Sena concernant toute occasion comme la difficulté, la douleur, la souffrance, le désagrément, la perte, la
blessure ou le décès qui se produirait à votre encontre ou à un tiers durant l'utilisation de ce produit.
2. Vous deve parfaitement comprendre et accepter tous les risques (y compris ceux se produisant en raison de votre
négligence ou d'autres) pouvant survenir durant l'utilisation de ce produit.
3. Vous ave la responsabilité de vous assurer que votre condition médicale permet l'utilisation du produit et que votre
condition physique est suffisante pour utiliser tout appareil pouvant être utilisé conjointement. De plus, vous deve vous
assurer que le produit ne limite pas vos capacités et que vous êtes en mesure de l'utiliser en toute sécurité.
4. Vous deve être majeur et porter la responsabilité de l'utilisation du produit.
5. Vous devez lire et comprendre les avertissements et les alertes suivantes :
●
Sena, en collaboration avec les employés, responsables, partenaires, filiales, représentants, agents, entreprises
et fournisseurs impliqués, seuls vendeurs de Sena (collectivement désignés comme
l'entreprise
) vous
recommandent, avant d'utiliser le produit et des appareils similaires de différentes marques y compris leurs
modèles dérivés, de recueillir à l'avance toutes les informations pertinentes et d'être entièrement préparé quant
aux conditions météorologiques et routières ainsi qu'à l'état de la circulation.
●
Si vous utilise le produit tout en conduisant un véhicule tel que des
●
motos, scooters, cyclomoteurs, quatre-quatre ou quads (ci-après dénommés
moyens de transport
), vous
devez faire preuve de la plus grande prudence quel que soit l'endroit d'utilisation.
●
L'utilisation du produit sur la route peut entra ner des risques de fractures, d'invalidité grave ou de décès.
●
Les facteurs de risque, pouvant survenir lorsque vous utilisez le produit, peuvent résulter d'erreurs du fabricant,
de ses agents ou de tiers impliqués dans la fabrication.
●
Les facteurs de risque pouvant survenir lorsque vous utilise le produit, peuvent être imprévisibles. Vous deve
par conséquent porter l'entière responsabilité pour tout dommage ou perte causée par l'ensemble des facteurs de
risque pouvant survenir lors de l'utilisation du produit.
●
Lorsque vous utilisez le produit, faites preuve de discernement ; ne l'utilisez jamais sous l'emprise de l'alcool.
6. Vous deve
lire et comprendre intégralement toutes les conditions se rapportant aux droits légaux et aux
avertissements qu’implique l'utilisation du produit. L'utilisation du produit constitue en outre une acceptation de l'ensemble
des conditions concernant la renonciation des droits.
Exclusions de garantie
Raisons des limitations de responsa ilité
Si vous ne renvoye pas le produit après l'avoir acheté, vous renonce à tous les droits de responsabilité, de pertes, de
50
| 10U
réclamations et d'indemnisations pour le remboursement des dépenses (y compris les honoraires d'avocat). Par
conséquent, Sena n'est pas responsable des blessures physiques, décès ou pertes ou dommages des moyens de
transport, possessions ou actifs vous appartenant ou appartenant à des tiers ayant pu se produire lors de votre utilisation
du produit. D'autre part, Sena n'est pas responsable des dommages substantiels qui ne sont pas liés à l'état, à
l'environnement ou au dysfonctionnement du produit. Tous les risques associés à l'utilisation du produit dépendent
entièrement de l'utilisateur, quelle que soit son utilisation par l'acheteur d'origine ou d'un tiers.
L'utilisation de ce produit peut être contraire aux lois locales et nationales. De plus, soye bien conscient que l'utilisation
adéquate et sans danger de ce produit relève de votre entière responsabilité.
imitation de responsa ilité
DANS LES LIMITES PERMISES PAR LA LOI, SENA EXCLUT POUR ELLE-M ME ET SES FOURNISSEURS TOUTE
RESPONSABILIT
CONTRACTUELLE OU D LICTUELLE (Y COMPRIS UNE N GLIGENCE) DE TOUT DOMMAGE
DIRECT, CONS CUTIF, INDIRECT OU PUNITIF DE QUELQUE NATURE QUE CE SOIT, OU POUR LA PERTE DE
REVENUS OU DE PROFITS, PERTES COMMERCIALES, PERTES D'INFORMATIONS OU DE DONN ES OU TOUTE
AUTRE PERTE FINANCI RE R SULTANT DE OU EN RELATION
LA VENTE, L'INSTALLATION, L'ENTRETIEN,
L'UTILISATION, LA PERFORMANCE, LA PANNE OU L'INTERRUPTION DE SES PRODUITS, M ME SI SENA OU SES
REVENDEURS AUTORIS S ONT
RESPONSABILIT
DE TELS DOMMAGES, ET LIMITE SA
R PARER, REMPLACER OU REMBOURSER LE PRIX D'ACHAT PAY , AU CHOIX DE SENA.
CET AVIS DE NON RESPONSABILIT
APPORT
AVERTIS DE L' VENTUALIT
PR SENTEMENT
POUR LES DOMMAGES NE SERA PAS AFFECT
N'ATTEINT
PAS
SON
BUT
ESSENTIEL.
DANS
TOUS
SI UN RECOURS
LES
CAS,
LES
RESPONSABILIT S D'INDEMNISATIONS TOTALES DE SENA OU DE SES AGENTS DE VENTE NE PEUVENT
D PASSER LE PRIX PAY POUR LE PRODUIT PAR L'ACHETEUR.
Exonération de responsa ilités
Outre les dommages pouvant survenir en raison de l'utilisation du produit, Sena n'est pas tenu responsable des
dommages du produit survenant en raison des situations suivantes.
●
Dans le cas o il est fait mauvais usage du produit ou qu'il est utilisé dans un but autre que celui prévu.
●
Dans le cas o le produit est endommagé car l'utilisateur ne suit pas le contenu du manuel du produit.
●
Dans le cas o le produit est endommagé car il a été laissé sans surveillance ou a subi un autre accident.
●
Dans le cas o le produit est endommagé car l'utilisateur s'est servi de pièces ou d'un logiciel n'étant pas fourni
par le fabricant.
●
Dans le cas o
le produit est endommagé car l'utilisateur l'a démonté, réparé ou modifié d'une manière ne
figurant pas dans le manuel du produit.
●
Dans le cas o le produit est endommagé par un tiers.
●
Dans le cas o
le produit est endommagé en raison d'événements imprévisibles (y compris les incendies,
inondations, tremblements de terre, tempêtes, ouragans et autres catastrophes naturelles).
●
Dans le cas o la surface du produit est endommagée pour cause d'usure.
Service de garantie
Pour faire valoir vos droits à un service de garantie du produit, envoye le produit défectueux, à vos frais, au fabricant ou
revendeur accompagné de la preuve d'achat (un re u indiquant la date d'achat, le certificat d'enregistrement du produit
du site internet et d'autres informations pertinentes). Prenez les mesures nécessaires pour protéger le produit. Afin
51
| 10U
d'obtenir le remboursement ou le remplacement du produit, vous deve inclure la totalité du paquet comme au moment
de l'achat.
Service sans frais
Sena offre un service de réparation ou de remplacement sans frais du produit lorsque les défauts de produit rentrent
dans la limite de la garantie du produit durant la période de garantie.
Service payant
Sena offre un service de réparation ou de remplacement payant du produit lorsque la période de garantie du produit a
expiré ou lorsque les dommages causés au produit sortent du cadre de la garantie du produit. Pour de plus amples
informations sur le service payant, vous pouvez contacter le centre de services de Sena.
Renvoi pour remboursement total
Si vous n'êtes pas d'accord avec les conditions exposées ci-dessus, vous pouve
renvoyer le produit pour un
remboursement total. Pour obtenir le remboursement, vous deve renvoyer le produit au vendeur dans le même état
dans lequel il a été acheté, dans une période de 14 jours à compter de la date d'achat.
moins de renvoyer le produit dans une période de 14 jours à compter de la date d'achat, vous aure lu et accepté
l'ensemble des conditions exposées ci-dessus et Sena ne sera pas responsable de toute réclamation ou dommages
associés au produit.
1.0.0
SENA
www.sena.com
User's Guide for Firmware v1.0
52

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 52
Language                        : ko-KR
Tagged PDF                      : Yes
Author                          : i
Creator                         : Microsoft® Word 2010
Create Date                     : 2015:04:23 15:33:53+09:00
Modify Date                     : 2015:04:23 15:33:53+09:00
Producer                        : Microsoft® Word 2010

EXIF Metadata provided by EXIF.tools