SKSpruce Technologies WIA3300-20 Indoor Access Point User Manual 20171102

SKSpruce Technologies Co., Ltd. Indoor Access Point 20171102

Contents

User Manual

http://www.skspruce.com/ San Jose 1885 Lundy Ave., Suite 270, San Jose, CA 95131, USA Tel: +1 (408) 449-5604 WIA3300-20 Indoor Access Point User Manual Hong Kong 15K International Industrial Centre, 2-8 Kwei Tei Street, Shatin, Hong Kong Tel: +852 26983874 Chengdu A1, Tianfu Software Park, 1129 Century City Road, High-tech Zone, Chengdu, Sichuan, P.R. China Tel: +86 28 85231119 Revision: 01 Issued on 2017-06-24 SKSpruce Technologies
1No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without prior, express and written permission from our company, Inc. Our company reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of our company to provide notification of such revision or changes. Our company provides this documentation without warranty of any kind, implied or expressed, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Our company may make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time.
 1. Pro SKSpru 2. Pro High peCompliHigh pe2x2 MISupport Robust802.1x SupportSSID/A Smart LActivelyIntelligenew ses duct Intruce WIA330duct Chaerformanciant with IEerformance MO 300 Mts up to 256t security and Web-bt for up to 3AP/VLAN bLink conney monitors ently responssions withoroduction 00-20 is a htoinstcwpWuanaracteristie Wi-Fi accEE 802.11adual-band (Mbps in the 26 connectionased authen32 SSIDs based user isectivity malink state annds to connout interruphigh performo meet rapidndoor applictandards anompact deswell as integower-over-WIA3300-20urban settingnd stadiumsic cess pointa/b/g/n/ac st(2.4 GHz an2.4 GHz banns ntication mesolation anagementnd connectiectivity intetion 2mance, dual-dly rising decations. Comnd supportinign and incgrated high pEthernet (P0 delivers ogs, such as ts. tandards andnd 5 GHz) snd; 867 Mbpechanismsivity to the cerruptions b-band indooemand for hmpliant witng 2x2 MIMludes optionperformancPoE+), makioutstanding ptransit cented 802.11ac solution ps in 5 GHzcontroller oby maintainior wireless ahigh capacitth IEEE 802MO. The WIns for ceiline antennas ing installatperformancers, malls, cwave2 z band) or gatewaying user sesaccess pointty and band2.11a/b/g/n/A3300-20 hng and wall and supportion easy. Thce in dense icorporate cassions and et designed dwidth in /ac has a mount, as t for he indoor ampuses, establishing
3 Easy to deploy, simple to manage PoE+ support and built-in high performance antennas Ceiling or wall mounting options Feature-rich AP with centralized optimization and management Supports innovative AP functions, such as PPPoE, Network Address Translation, and DHCP server/client, wireless SSID and encryption settings Zero-touch join and configuration Physical Specifications Power input 802.3 at power over Ethernet (PoE) Supports local power input (DC12V/2A) Overall power consumption <25 W (USB power not included) Supports power-down of unused radios Dimensions (W x D x H) (200 mm x 200 mm x 45 mm) Weight 1.76 lbs (0.80 kg) Ethernet ports 2 x 10/100/1000Base-T Console port 1 USB 2.0 Reset 1 Reset button Indicators 1 Power/status 1 5G WLAN 2.4G WLAN Ethernet port Operating temperature +14°F to +131°F (–10°C to +55°C) Storage temperature –40°F to +158°F (–40°C to +70°C) Relative humidity 5%–95% noncondensing WLAN Specifications Antenna PCB antenna, 3 dBi gain Operating frequency 802.11a/n/ac: 5.15–5.85 GHz 802.11b/g/n: 2.4–2.4835 GHz Spatial streams 2x2 MIMO
 3. Inst3.1 Step 1 CStep 2 PStep 3 Atallation Ceiling-moOCut an openPut the AP Attach one opening atount InstallOperation Sning of 235 inside the cof the mount roughly thelation Steps： mm in diamceiling near nting springe same dista4meter in thethe openinggs inside theance apart ( e ceiling. g and compe opening, a(see figure blete the netwand then plabelow). working conace the othennection. r two in thee
Step 4 P3.2 Put the equiWall-mounTysOipment ontont InstallatTwo slots oyou need toscrews. Operation so the holderion on the bed oo install thissteps: 5r to competef this equips product on e the installapment are usn the wall, yation. sed for instayou will neeallation on ted two 5 mmthe wall. If m diameter
 3.3 Step 1 TiStep 2 DiStep 3 StStep 4 A Step 5 SmNic Device ConStep 1 IyTo determineinterferenceDrill two holinstalling sccrew one bothe hole. Aim the wallSlide the equmounting slNote: Wheninstallation connection nnection Insert one enyour PC or e the mounte sources (sules 128mm crews. olt in each hl mounting uipment dowlots. n this equipmpoint is in tpoint. nd of the Etother Ether6ting point, cuch as micrapart on thehole. Ensureslots to the wn until thement is instthe range ofthernet cablrnet front-enchoose a cenrowave ovene selected we at least 5 mtwo screwse screw tightalled on thef the power le to a LANnd ports of Entral positions and cordlwall. These tmm screw hs. htly clipped e wall, confoutlet or ot N port. Then Ethernet neton far away less phonestwo holes arhead exposeinto the wafirm that thether power sinsert the otwork devicfrom s). re used for ed outside all e supply other end to ces.
 Step 2 (OpStep 3 Sptf Optional) Inpower switcet up wirelepanel→Netthe networkfrom the list nsert one ench, and inse ess data linktwork and Ik. View optit, and click 7nd of the powert the biggek: on WindoInternet→Vional wireleconnect buwer adapterer end into p ows desktopView networess networkutton to startr (smaller onpower sockep, select Stark status anks. Select thet using the w ne) on the bet. art→Contrond tasks→Ce name of ywireless netback of the ol Connect to your device twork.
84. Tune up procedure 4.1 Network Configuration Connect the Ethernet cable to WIA3300-20 ETH2 Port （LAN Port）, the default IP address is 192.168.18.1. Telnet Login telnet 192.168.18.1 User Name: admin Password:5upS%k! Connection Equipment Default SSID(skspruce-xxxx) “skspruce-XXXX”(XXXX represent the latter 4 characters of MAC address. SSID default is WPA2-PSKencrption，password:12345678
94.2 Configuration (2.4G) Working Setting Open RF uci set wireless.wifi0.disabled=0 uci commit2 wireless wifi The command is still valid after reboot. Close RF uci set wireless.wifi0.disabled=1 uci commit2 wireless wifi The command is still valid after reboot. Set Channels Set channel 6，the command below, uci set wireless.wifi0.channel=6 uci commit2 wireless wifi if Set other channels，change‘6’to other value，for example‘3’. The command is still valid after reboot. Set Bandwidth Set bandwidth HT20，the command below, uci set wireless.wifi0.htmode=’HT20’ uci commit2 wireless wifi if set other values，directly change HT20 above-mentioned，the value range：HT20、HT40 The command is still valid after reboot.
104.3 Configuration (5G) 5G Working Setting Open RF uci set wireless.wifi1.disabled=0 uci set wireless.@wifi-iface[2].set11NRates=0x80808080 uci set wireless.@wifi-iface[3].set11NRates=0x80808080 uci commit2 wireless wifi The command is still valid after reboot. Close RF uci set wireless.wifi1.disabled=1 uci commit2 wireless wifi The command is still valid after reboot. Set Channels Set Channel 60，the command below, uci set wireless.wifi1.channel=60 uci set wireless.@wifi-iface[2].set11NRates=0x80808080 uci set wireless.@wifi-iface[3].set11NRates=0x80808080 uci commit2 wireless wifi if set other channels, change‘60’to other values，for example‘36’. The command is still valid after reboot. Set bandwidth If set bandwidth HT20，the command below uci set wireless.wifi1.htmode=’HT20’ uci commit2 wireless wifi
11if set other values，directly change HT20 above-mentioned，the value range：HT20、HT40、ac80 The command is still valid after reboot. FCC Warning Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ■ Reorient or relocate the receiving antenna. ■Increase the separation between the equipment and receiver. ■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ■ Consult the dealer or an experienced radio/TV technician for help. FCC Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. . This device and its antenna(s) must not be collocated or operating in conjunction with any other antenna or transmitter.
12 FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body

Navigation menu