SKYPINE ELECTRONICS CNE8201BALP Entertainment Systems User Manual 06 21 09 31 13
SKYPINE ELECTRONICS (SHEN ZHEN) CO., LTD. Entertainment Systems 06 21 09 31 13
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1563233 |
| Application ID | I8iOodtOtOnOtC2UMHDpHw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 34.77kB (434591 bits) |
| Date Submitted | 2011-10-19 00:00:00 |
| Date Available | 2011-10-19 00:00:00 |
| Creation Date | 2011-10-09 16:42:36 |
| Producing Software | pdfFactory Pro 3.17 (Windows XP Professional Chinese) |
| Document Lastmod | 2011-10-09 16:44:06 |
| Document Title | User Manual_06-21-09-31-13_.doc |
| Document Creator | pdfFactory Pro www.fineprint.cn |
| Document Author: | songchunhui |
Foreword Thank you for choosing this multi-media System as your new entertainment system .This onwer's manual will add to your understanding and full enjoyment of the numerous fine features of this system . This system reserves the right to make changes in design and specification . AUDIO/VIDEO NAVIGATION USER MANUAL Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. -1- AUDIO/VIDEO NAVIGATION USER MANUAL 1. MAIN MENU(CONTROLS AND INDICATORS) This unit contain Radio , DVD , Navigation , Bluetooth , iPod, Rear view camera , SD, USB, AV IN, Setup ect. Touch icon on the main menu screen to enter the mode . There are 2 pages main menu ,as shown in figure 1 ：interface 1 is main menu ，display main function , Sliding page to flip over . Page no is shown where you are .Interface 2 is root menu and touch icon to enter corresponding function ; Touch the left upper return icon to exit main menu and back to working interface ; Single touch the icon beside return button to turn off screen. 1-1.Main Menu interface -2- AUDIO/VIDEO NAVIGATION USER MANUAL Icon Button Name Navigation Function description Inserting the Map card and touch to enter NAVI interface ,refer to the Navi users manual . Setup Touch to enter system setup . Radio Touch to enter Radio mode . When inserting a DVD disc DVD mode is entered and Playback disc play begins . DVD USB Playback iPod Playback SD Card Playback Connect with USB , touch to enter USB mode . Touch to enter iPod playback interface . Inserting SD card and touch to enter SD playback mode . Bluetooth Touch to enter Bluetooth mode -3- AUDIO/VIDEO NAVIGATION USER MANUAL An external audio/video device can be connected to this AUX 1 unit ,touch to enter AUX IN mode . ***Optional*** An external audio/video device can be connected to this AUX 2 unit ,touch to enter AUX IN mode . ***Optional*** "Camera"mode is only available when the camera is Camera connected and when backing -up.To install a rear view video camera ,connect the camera video input cable to the rear view camera output cable . 2. TUNNER ( FM/AM ) OPERATION Enter system main menu , touch the radio icon to enter radio mode ,touch other icon to exit ,the radio playback interface as shown in figure 1. ² Select FM/AM Band Touch the Band on the screen to change among the following bands: FM-1, FM-2, FM-3, AM-1。 ² Manual Tuning ● Press the icon ( ► ) to increase the tuning frequency one step at a time. ● Press the icon (◄ ) to decrease the tuning frequency one step at a time. ● Or touch directly on the Manual tuning display to locate your desired stations. -4- AUDIO/VIDEO NAVIGATION USER MANUAL ² Storing a Station Select a band ( If needed ), then select a station. Example: FM1 103.6MHz Touch and Hold for 3 seconds the desired preset number to store Radio station. ² Recalling a Station Select a Band ( If needed ). Touch On-screen preset buttons to select the corresponding stored stations or press the number button on the Radio panel. ² Auto Store ( AS ) Press AS icon on the screen to automatically scan and store all stations in current band. ² Preset Scan ( PS ) Touch the PS icon on the screen for scan the stations in the 6 preset channels in the current band. ² Scan Touch the Scan icon on the screen to automatically scan all stations in current band to preview stations. Press any to stop scanning and listen to the selected stations. -5- AUDIO/VIDEO NAVIGATION USER MANUAL -6- AUDIO/VIDEO NAVIGATION USER MANUAL Ø 2-1. Radio interface Icon Button name Function description Home Button Touch to back to main menu . 10：30 System clock Left Open Right Open Current frequency Playing Source Display current time ,press to enter screensaver . Touch to open Hide button. Touch to open Radio Preset frequency list. Current frequency, ③is the NO. in preset list . change among the following bands: FM-1, FM-2, FM-3 and AM, preset 6 station each band . Program scan Press the PS button on the screen. Scan the stations in the 6 preset channels in the current band. Auto store Press AS button on the screen to automatically scan and store all stations in current band. activate/ deactivate Click on up/ down button to run number seeking the station ,Click on scroll pannel change to digit keyboard . Scan Mode seek up Touch to down a step of the current frequency . -7- AUDIO/VIDEO NAVIGATION USER MANUAL Icon Button name seek down Frequency scale Function description Touch to up a step of the current frequency Display current frequency and touch to select a new station . 3. iPod Operation Please Fist make sure of that your ipod/iphone connect to the DVD machine via USB， Then switch current source to iPod source by touching iPod icon on main menu or using “SRC” panel button. IPod function can be showed by picture３-１,３-２. 3-1 3-2 -8- AUDIO/VIDEO NAVIGATION USER MANUAL Icon Button name Interface title iPod play 10：30 System clock Function description Display current interface Display the currently system time,click to screen saver mode current play Display the current playing song's progress time progress bar The previous line display current playing song,.the song name will roll display. Play message The next line list the song's ID3 informations, including singer, album,time,genre and etc. Last song button Touch to play the last track of the song list. Next song button Touch to play the next track of the song list Play/Pause button Press to begin playback.press again to pause playback. EQ button Press the icon to access the Equalizer menu. 4 . player function operation This system player function can play DVD disc.It cancompatible with DVD/VCD/CD/MP3/WMA/JPEG/MPEG and other kinds of disc and multimedie format file. -9- AUDIO/VIDEO NAVIGATION USER MANUAL Warning :Please use the authorized disc and keep it clean. It is strictly prohibited to use damaged disc. Only one disc is in the system one time . Firstly confirm whether there are CDs in the system,then enter main menu,touch the player function button to enter the player function mode. If there is no CDs in the system,put the disc in the disc mouth lightly,the disc will be slotted automatic. When the system detected the disc,it will auto switch to disc player function mode and play the CDs. Disc play interface as below. Ø 4.1 Audio files play interface 4-1 DISC audio play interface 4-2 multimedia format disc root directory menu - 10 - AUDIO/VIDEO NAVIGATION USER MANUAL 4-3 DVD picture play interface Function operation as below： Icon Button name Interface title DVD play 10:30 System clock Function description Display the name of current interface Display the currently system time The previous line display current playing song,.the song name will roll display. Play message The next line list the song's ID3 informations, including singer, album,time,genre and etc. Return to root If the media file is folder into different files,press this button into directory button root directory ,then list all the files name. As the charts 4-2 Last song button Touch to play the last track of the song list. Next song button Touch to play the next track of the song list Play/Pause button Press to begin playback.press again to pause playback. Press to loop playback. Press different times can switch from Loop playback button single repeat to folder repeat and all repeat and repeat off. Random play button Press to switch the shuffle mode on or off. - 11 - AUDIO/VIDEO NAVIGATION USER MANUAL Icon Button name Number button EQ button Ø 4.2 Function description Press to access the direct access song selection function. Press the icon to access the Equalizer menu. Disc picture file play interface Click the picture ,enter to see the picture as 4-4 Click the shade in bottom of the screen can reveal the stop and rotating button. Click again can hide the button. 图 4-4 Icon disc picture file play interface Button name Function description Counter-cloc kwise button Press this icon to rotate the image counter-clockwise in 90 degree Clockwise button Press this icon to rotate the image clockwise in 90 degree increments. Stop button increments. Press to return to image list interface Warning: File large image browse affect the display speed. So please use smaller image files to make sure you can view the picture fluent. - 12 - AUDIO/VIDEO NAVIGATION USER MANUAL Ø 4.3 DVD video file play interface Under the media playing mode,touch can back to the DVD interface.(as the graph 4-3) 5. SD card and USB operation Make sure the SD card input and USB connected with the system before using SD card and USB function. The system would switch to USB playing interface directly when USB has connected well with the system. For extend the service life of the SD card, we recommend to not extract SD card in use it. Ø 5.1 SD card/USB video file playing interface Enter the system main menu,click SD card/USB button to the corresponding function mode, click the other function button can exit this mode. The SD card and USB has the some playing interface as the 5-1 : 图 5-1 USB/SD Audio - 13 - interface AUDIO/VIDEO NAVIGATION USER MANUAL Icons Button name Function description Interface title SD card play Display the name of current pattern 21:09 System clock Display the currently system time The previous line display current playing song,.the song name will roll display. Play message The next line list the song's ID3 informations, including singer, album,time,genre and etc. Return to root If the media file is folder into different files,press this button directory button into root directory ,then list all the files name. As the charts 4-2. Last song button Press to play the last track of the song list. Next song button Press to play the next track of the song list Play/Pause button Press to begin playback.press again to pause playback. Loop playback button Random play Number button EQ button Press to loop playback. Press different times can switch from single repeat to folder repeat and all repeat and repeat off. Press to switch the shuffle mode on or off. Press to access the direct access song selection function. Press the icon to access the Equalizer menu. - 14 - AUDIO/VIDEO NAVIGATION USER MANUAL Ø 5.2 SD card/USB image files play interface Click the bottom of the screen can reveal the stop and rotating button. Click again can hide the button. 图 5-4 SD card/USB image files play interface Warning: File large image browse affect the display speed. So please use smaller image files to make Icons Button name Function description Counter-cloc kwise button Press this icon to rotate the image counter-clockwise in 90 degree Clockwise button Press this icon to rotate the image clockwise in 90 degree increments. Stop button increments. Press to return to image list interface - 15 - AUDIO/VIDEO NAVIGATION USER MANUAL Ø 5.3 SD card/USB video files play interface Click the bottom of the screen can reveal the play ,pause,skip forward and rewind button. Click again can hide the button. 图 5-5 SD card/USB video files play interface Warning:SD card and USB are movable storage device, the system support stored MP3,WMA,JPEG,MPEG video files. As different brands have different standard in SD card and USB producing, some of SD card and USB may be not supported. Please use the SD card/Udisk from regular manufacturers. - 16 - AUDIO/VIDEO NAVIGATION USER MANUAL 6. Bluetooth function operation The system supports Bluetooth hand-free communication function, so if your cellphone have bluetooth function, it can establish point-to-point connection and dial-up on screen. Warning: As different brands adopt different kinds of bluetooth technology and software , it may have discrepancy in using. Some even not compatible.This is not the problem of our bluetooth system. Sorry for the inconvenience. Please confirm the bluetooth function opened before using the bluetooth. Access the setup menu first, select the bluetooth open function in general set. As the picture 6-1 6-1 bluetooth on/off set The bluetooth icon in the top right screen will not flashed when BT equipment has connected with the system. The BT icon would flash if not connected. 图 6-2. Bluetooth phone interface. - 17 - AUDIO/VIDEO NAVIGATION USER MANUAL Ø 6.1 Phone You can dial and listen the phones by the system screen in dialer interface. The specific as figure 6-2 Icon Button name Bluetooth mark １０：３０ System clock Voice switching key The bluetooth icon flash means bluetooth be powered off , on the contrast, be powered on when the icon not flash. Display the currently system time Switch the voice call from the vehicular speaker phone to mobile phone when you click the voice switching key during a conversation. Hold button As the mobile phone hold button. Dial button As the mobile phone dial button Delect button 6.11 Function description Delect the wrong numbers in the message box. Dial function Dial numbers from mobile phone or system screen. Click the dial button . 6.12 telephone access listen to function The system will change to BT function interface automatic from other function mode when a telephone access.It can also change the original mode voice to the caller ring tone.Click the voice switching button can switch the voice call from the vehicular speaker phone to mobile phone. - 18 - The caller ID will AUDIO/VIDEO NAVIGATION USER MANUAL indicate in the message box. Ø 6.2 Check call records function Clicking this button on the screen can check call records (as the graph 6-3), double click the recorded number can call it. The interface will change to call interface after connected. Music Playback Interface Ø 6.3 Bluetooth Setup on the left side of the screen to get access to the Bluetooth Touch the icon setup interface, which includes the pairing mode,auto answer and connect (see picture below). The interface returns to the keypad automatically when no settings are made. Bluetooth setup interface - 19 - AUDIO/VIDEO NAVIGATION USER MANUAL Icon Function description Press the on-screen pair button to initiate the pairing,then select yes or no. If your mobile phone pop up a prompt Pairing requesting a pass key or pairing code after you select "Yes",enter "1234" to connect.The Bluetooth will be disconnected when you select "No". Auto answer When the auto answer is on, the unit will answer the call automatically. Touch options to specify how incoming calls are handled: Connect Auto connect: the unit will automatically connect the previous mobile phone. Manual connect Ø 6.4 Bluetooth Streaming Music(A2DP) The bluetooth provides the Advanced Audio Distribution Profile (A2DP) for streaming music. Playback control are performed by the control bar in the transparent shade below. Icon Button Play/Pause Stop Function Description Touch to play or pause the music playing Touch to return to the audio play list interface If the music starts playing for less than 2 seconds, Previous touch it to play the previous file or you have to repeat the current music Next Touch to play the next file. - 20 - AUDIO/VIDEO NAVIGATION USER MANUAL 7. EQ settings Click the equalizer under each source playing mode to enter into the EQ settings menu.You can select Jazz,Pop, Classical, Rock or User according to your preference in the EQ adjustment menu.See picture below: EQ settings interface Icon Button Function Description The Exit button is invisible. You can Exit mode click to exit from the EQ settings You can switch the music genre by EQ mode clicking the left and right arrows switch sw Subwoofer bass Bass treble Treble bal Balance fade Fade Scroll the blue rectangular bar to adjust the subwoofer Scroll the blue rectangular bar to adjust the bass Scroll the blue rectangular bar to adjust the tremble Scroll the blue rectangular bar to adjust the balance Scroll the blue rectangular bar to adjust the fade - 21 - AUDIO/VIDEO NAVIGATION USER MANUAL 8. Rear View Camera NOTE: only after you connect the rear view camera with our unit, the Camera function works. Not connected with rear view camera Camera image with rear view camera connection When the camera is installed, the rear view image of what's behind the vehicle will appear when the vehicle is placed in reverse gear. See picture above.When you place the forward gear, the unit returns to the previous working mode automatically. If no camera is installed, when you place the reverse gear or click the Camera icon in the main menu, unit displays " No signal input" see picture above You can also watch what's behind the vehicle when camera is installed under the camera interface. - 22 - AUDIO/VIDEO NAVIGATION USER MANUAL 9. AUX1/AUX2 NOTE: The AUX1/AUX 2 is available only the unit is connected with the external A/V device,otherwise prompt shows "No signal input" AUX 1:No signal input AUX 2:No signal input Our unit supports bothAUX1 and AUX2 Inputs,each input can be connected with camera, game consoles,walkmans and other playing devices. If there is no signal, screen displays "No signal input".You can click the upper left corner to return to main menu. - 23 - AUDIO/VIDEO NAVIGATION USER MANUAL 10. System Setup System setup consists of 6 sub-menu settings: system settings, ASP settings,general settings, language settings,Navigation settings and time settings. Ø 10.1 System settings In system settings, there are calibration,set password,Parental control,Factory default. See picture below: System settings interface TS Calibration:After selecting "Yes",a crosshair + appears in a corner quadrant of the screen.To begin calibration,press and hold the crosshair for one second until t moves to the next quadrant.Continue for eash quadrant until the calibration is completed. Set password:Enter a 4-digit password to activate the "Parent Control" function.To reset the password, access the "Set Password" option and enter the current password to unlock the field.Access the "Set Password" again once unlocked and enter a new password.( the default password is blank,you can enter 8888 to unlock the parent control anytime. Parent Control:Select the appropriate rating level for the inteded audience.You may override higher ratings by using your password. Factory default: Select "Yes"to restore the factory default settings for the rating system only. - 24 - AUDIO/VIDEO NAVIGATION USER MANUAL Ø 10.2 ASP settings ASP settings has four sub-menu settings:Bass Freq, Tremble Freq, Sub Freq and Bass Q factor. See picture below: Ø 10.3 General settings General settings has five sub-menu settings:Beep, Camera, Bluetooth, Wallpaper and Version .See picture below Beep: when turned on, an audible beep tone confirms each function selection. Camera: when turned on, the rear view camera function is on. Bluetooth: when turned on, the bluetooth is on. Wallpaper: Select the wallpaper according to your preference. Version: software version information display - 25 - AUDIO/VIDEO NAVIGATION USER MANUAL Ø 10.4 Language settings Language settings has three sub-menu settings: OSD language, Subtitle language and audio language.See picture below. OSD language:set the show-on screen language display,language options include English, France, Spanish and Chinese. Audio language: set audio language display.language options include English, France, Spanish and Chinese. Subtitle language: set the subtitle language.language options include English, France, Spanish, Chinese,automatic and off. Ø 10.5 Navi setting Navi settings includes: Navi volume,GPS time, Navi setting - 26 - AUDIO/VIDEO NAVIGATION USER MANUAL Ø 10.6 Time setting Time setting includes: time setting and date setting. See picture below Date setting Time setting Date setting: click the date setting and pop up the keypad " MM/YY/DD", then click the numeric keypad to set the date. Time setting: click the date setting and pop up the keypad " AM/TIME/ PM", then click the numeric keypad to set the time.Click the AM/PM to select 12H or 24H. Please pay attention to the following tips when reset the DVD rating level: **Input the password to unlock the field,then the password is cleared.In order to validate the password please re-enter the password. **The rating of each disc is marked on the disc,disc packing or document.If the rating is not available on the disc, the parental lock feature is unavailable.Some discs restrict only parts of the disc and only the appropriate content will be displayed. - 27 - AUDIO/VIDEO NAVIGATION USER MANUAL 11. Steering Wheel Function Study Enter into the setup interface, click the others to enter the other settings interface.The steering wheel function study interface is as below: The Steering Wheel Function Study goes as: Enter into the study interface, click the function key, and push the same buttons on the steering wheel. After the study is completed,the function key will be turned into blue.After all the functions study is finished,click the upper left corner to exit the study interface.If you push the wrong buttons on the wheel,please click the study mode options( such as general, mode 1 and mode 2) to do the study again. There are three modes of steering wheel function study:General,Mode 1 and Mode 2, each is with different parameters to match different vehicle series.The General and Mode 1 is suitable with most vehicles while Mode 2 is served to the special vehicles. System reset notes: ** If you reset the DVD settings, the Parent control password and rating level setting will not be changed. ** Please note that DVD reset is different with system reset.DVD reset is only to restore the DVD loading settings with other settings unchanged.System reset is to erase all the user settings to restore the factory default settings. - 28 -
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No XMP Toolkit : 3.1-702 Create Date : 2011:10:09 16:42:36+08:00 Creator Tool : pdfFactory Pro www.fineprint.cn Modify Date : 2011:10:09 16:44:06+08:00 Metadata Date : 2011:10:09 16:44:06+08:00 Format : application/pdf Creator : songchunhui Title : User Manual_06-21-09-31-13_.doc Producer : pdfFactory Pro 3.17 (Windows XP Professional Chinese) Document ID : uuid:9e033cd6-3310-48ac-b3ab-fbe023faf460 Instance ID : uuid:5f76aa18-a77b-4194-9700-3e5f42aac446 Page Count : 29 Author : songchunhuiEXIF Metadata provided by EXIF.tools