SKYPINE ELECTRONICS CNE8213FA Car DVD entertainment center User Manual Contents
SKYPINE ELECTRONICS (SHEN ZHEN) CO., LTD. Car DVD entertainment center Contents
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1381461 |
| Application ID | sFhA6OMP+1GvjDv1GBABLw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 138.01kB (1725178 bits) |
| Date Submitted | 2010-11-24 00:00:00 |
| Date Available | 2010-11-24 00:00:00 |
| Creation Date | 2009-08-10 15:14:24 |
| Producing Software | PDFlib 7.0.3 (C++/Win32) |
| Document Lastmod | 2010-11-24 14:06:58 |
| Document Title | Contents |
| Document Creator | WPS Office 2007 专业版 |
| Document Author: | fxzm |
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning:Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. FCC ID:V8VCNE8213FA VER: 7-9820-8319-00-00 Contents Thank you for your choosing our product. We hope you will find the instructions in this user manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new unit for maximum enjoyment. After you have finished reading the instructions, please keep this manual in a safe place for future reference. Precautions 3-4 On safety Moisture condensation To maintain high sound quality Playable discs DVD Region Management Preparation Features Tools and Supplies WARNING Disconnecting the Battery Controls and Indicators 6-7 Button Operation The Key Areas Of Touch Screen Remote Control 8-9 Front Zone Remote Control TFT Monitor Operation 10 Rear Camera Mode Image Settings Parking Brake Interlock 10 10 10 Operating Instructions 11-12 Power On / Off Playing Source Selection Volume Adjustment Audio Control Menu Five-Channel Audio Control Rear Zone System Reset Mute Standby 11 11 11 11 12 12 12 12 12 System Setup Menu 13-17 MAIN Menu Rear zone Menu Screen Setting General Setup Menu Video ASP(Audio Signal Processing) Configuration Menu Language Menu Tuner Operation 13 13 13 14 15 16 17 18-19 Tuner TFT Display Switch to Radio source Select FM/AM Band Auto Tuning Manual Tuning Using Preset Stations Auto Store (AS) Program Scan (PS) Local Radio Stations Seeking (LOC) 18 18 18 18 19 19 19 19 19 DVD Player Operation 20-25 Insert/Eject Disc Reset the Loading Mechanism Accessing DVD Mode Using the Touch-Screen Controls Controlling Playback Accessing the DVD Menu Moving Through Chapters Fast Forward/Fast Reverse Selecting 2-Channel or 6-Channel Audio Playback GOTO Search Direct Chapter / Track Selection Viewing an Alternate Picture Angle (DVD Only) Zooming Multi-Language Discs (DVD Only) Playback Information General Disc Information CD/MP3/WMA/JPEG Operation 20 20 20 20 21 21 21 21 22 22 23 23 23 23 23 25 26-28 CD Player User Interface MP3/WMA Discs JPEG Discs 26 27 28 iPod Operation 29 Accessing iPod Mode iPod Instructions Playback of video on iPod 29 29 29 USB Operation SD Operation Navigation Operation 30 31 32 How to access the Navigation mode How to Listen to Audio While Using Navigation Bluetooth Operation 32 32 33-36 Accessing Bluetooth Mode Bluetooth User Interface 33 33 Troubleshooting Specifications 37-40 41 NOTE NOTE: 1. certain description in the book may differ from the actual unit. 2. Some pictures or icons in the book may differ from actual display. 3. Specifications subject to change without notice. Precautions To avoid the risk of injury or accident, read the following precautions before installing and operating the unit. On safety Comply with your local traffic rules and regulations. � While driving � You must not watch or operate the monitor. It may lead to distraction and cause an accident. Park your car in a safe place to watch the monitor and operate the unit. � While operating � Do not insert your hands, fingers or foreign object into the unit while the monitor is functioning. It may cause injury or damage to the unit. � Keep small articles out of the reach of children. � If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it. � Preventing accidents The video pictures appear only after you park the car and set the parking brake. When the car starts moving, the video pictures automatically disappear for safety reasons, after displaying the following caution. CAUTION!!! IT'S UNLAWFUL TO OPERATE A VEHICLE WHILE VIDEO IS DISPLAYED IN THE DRIVERS VIEWING AREA. ENGAGE EMERGENCY BRAKE TO ENJOY VIDEO Do not watch the monitor while driving. You may cause a traffic accident if your attention is distracted by the monitor. � Do not use the System Setup feature while driving, or perform any other function which could divert your attention from the road. � When you connect the back camera: � When you drive, watch the surroundings carefully for your safety. Do not depend on the back camera exclusively. � When backing up you car, be sure to look back for your safety. � Do not touch the liquid crystal fluid if the LCD is damaged or broken. The liquid crystal fluid may be hazardous to your health or fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately. Moisture condensation When the temperature of the unit falls (as in winter), the liquid crystal inside the screen will become darker than usual. Normal brightness will return after using the monitor for a while. To maintain high sound quality Be careful not to splash juice or other soft drinks onto the unit or discs. Playable discs The following types of discs/files are compatible: � CD-ROM (ISO), CD-R, CD-RW, DVD+R/RW, DVD-R/RW � CD-DA, DVD Video � MP3 data � WMA data � JPG images � WMV format � DivX format � AVI format � MPG format The following types of discs/files are not compatible: � WMA files that are protected by DRM (Digital Rights Management) � WMA lossless format � Discs recorded with Track At Once or packet writing � MP3 PRO format � MP3 playlists � WAV format Some recordable DVDs and CDs may be incompatible with this unit, depending on media type and recording method. DVD Region Management Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the unit plays discs according to their intentions, some functions may not work as intended. Please be sure to read the instructions provided with each disc. This player has been designed to play back DVD software that has been encoded for specific region areas. It cannot play back DVD software encoded for other region areas than the region areas for which it has been designed. The unit will play discs labeled “All”. DVD region codes: 1 - USA, Canada 2 - Japan, Europe, South Africa, Middle East 3 - Rep. of Korea, Taiwan, Hong Kong, Parts of Southeast Asia 4 - Australia, New Zealand, Mexico, South America 5 - Eastern Europe, Russia, India, Africa 6 – China Preparation Please read all of the instructions below before beginning your installation. We recommend that you have your unit installed by an experienced car navigation system installer Features � � � � � � � � � � Double DIN size, all-in-one highly integrated entertainment system Built-in DVD Player, automotive specification slot loading mechanism Built-in FM/AM Tuner, High resolution 6.2”(16:9) TFT color monitor, contrast and brightness adjustment Built-in 40W X 4 output amplifier, 4.1 channel surround sound output. Dual zone function with easy operation. Smart Touch-screen operation All functions can be operated by touch screen,included Remote Controls Built-in iPod Control, Navigation system Powerful Graphic User Interface and software update ability. Tools and Supplies We suggest using these tools and supplies to install the unit. • Torx type, flat-head and Philips screwdrivers • Wire cutters and strippers • Tools to remove existing radio (screwdriver, socket wrench set or other tools) • Electrical tape • Crimping tool • Volt meter/test light • Crimp connections • 18 gauge wire for power connections • 16 – 18 gauge speaker wire • Heatshrink tubing • Soldering iron and solder WARNING! 1. Only connect the unit to a 12-volt negative ground system. 2. Never install this unit where operation and viewing could interfere with safe driving conditions. 3. To reduce the risk of a traffic accident (except when using for rear view video camera) never use the video display function while driving the vehicle. This may be in violation of local laws. 4. Never disassemble or adjust the unit without the assistance of a professional. For details, please consult your local car stereo specialty shop. 5. To prevent injury from shock or fire, never expose this unit to moisture or water. 6. Never use irregular discs, the only recommended disc size is a 12cm round disc. 7. To prevent damage to the mechanism inside this unit, avoid impact to the TFT monitor. 8. Do not change the fuse on the power wire without professional guidance. Using an improper fuse may cause damage to the unit and result in a fire. 9. The monitor employs an automatic motorized mechanism. To prevent damage to the core mechanism, please do not push, pull or swivel the monitor manually. Disconnecting the Battery To prevent a short circuit, turn off the ignition and remove the negative (-) battery cable prior to starting the installation. NOTE NOTE: If the unit is to be installed in a car equipped with an on-board drive or navigation computer, do not disconnect the battery cable. If the cable is disconnected, the computer memory may be lost. Under these conditions, use extra caution during installation to avoid causing a short circuit. S and NOTE S in this manual NOTE NOTE: It is especially important that you read the WARNING WARNINGS NOTES Controls and Indicators Button Operation 1、EJECT Press for disc insertion/ejection. 2、POWER OFF/VOL/Smart dial Rotary encoder volume control. Press to power on when the machine is in power off estate. Press and hold to power off while unit is on. Short press while unit off to enter EQ setting Rotary encoder to browse mode while in main menu,and press to enter chosed mode Rotary encoder to browse mode while in NAVI mode,and press to enter chosed mode 3、Menu Press to enter main menu,press again back to previous mode 4、Navi Press to enter navigation mode,Press again back to previous mode while in Navi mode 5、SD SLOT SLOT. 6、USB PORT 7、Microphone 8、Touch screen TFT 9、Front AUX-IN Jack 10 10、Disc slot 11 11、Disc indicative LED Red is with disc Blue is without disc 12 12、Remote sensor 13 13、RESET The key areas of touch screen The touch key areas are outlined below, for DVD, VCD playback mode and so forth. Area A Area F Area B Area C Area D Area E A — Return to MAIN MENU B — Display playing information C — Select previous chapter D — Select next chapter E — Display the on-screen controls, and different mode displays different menu. F —On DVD/VCD mode, display the GOTO search menu on the screen directly. Remote Control Front Zone Remote Control ○ ○ ○ ○ ○ ○ ○ 10 ○ 11 ○ 13 ○ 14 ○ 15 ○ 19 ○ 20 ○ 23 ○ 24 ○ 27 ○ 28 ○ ○ ○ 12 ○ 16 ○ 17 ○ 18 ○ 21 ○ 22 ○ 25 ○ 26 ○ Name Ref # Power Open Mute SRC Numeric button VOL up VOL down Information GOTO search Stop/Band 10 Select ESC Menu Picture Repeat A�B OK Direction buttons 11 12 13 14 15 16 Turn the power on/off disc insertion/ejection. Toggle on/off audio output Select playing mode Directly access certain chapter / track / preset station in current band Increase the volume Decrease the volume Display playing information Position search function on VCD/DVD mode Select FM/AM band on Tuner mode Stop playback Enter the audio settings Exit the current menu Enter the main menu of system Adjust the parameter of TFT settings Set start point A and end point B to repeat continually Start or pause playback, confirm the settings 17 Up/down/left/right to select items for setting Signal 1.2.3.4.5. 6.7.8.9.0 Function Title 18 Also can activate and disable SCAN mode while playing CD Root 19 Enter the main menu of the disc Turn on PBC while playing VCD Repeat 20 Repeat playback for current chapter Next 21 Previous 22 Fast Reverse 23 Fast reverse the disc content Fast Forward 24 Fast forward the disc content Audio 25 Change the audio language for disc playback Zoom 26 Zooming in/out on an image Angle 27 Play in different angle for a scene（if it is applicable） SUB Title 28 Language selection for subtitle Select the next chapter/track for playback Search an available radio station by increasing tuning frequency on tuner mode Select the previous chapter/track for playback Search an available radio station by decreasing tuning frequency on tuner mode TFT Monitor Operation Rear Camera Mode When the vehicle is placed in "Reverse", and an optional rear camera is connected to the unit, the TFT monitor will automatically switch to the camera input source. Image Setting Video Output Format The table below shows the video output format for each source. Video Output Format Playing Source Video Output Format FM/AM Tuner RGB Mode DVD RGB Mode NAVI RGB Mode AUX IN CVBS Mode CAMERA CVBS Mode iPod(video) CVBS Mode *CVBS-- Composite Video Base band Signal Adjustable Parameters While in RGB mode, the only parameter that can be adjusted is brightness (BRIGHT). To access “SHARPNESS” “COLOR” “CONTRAST” “BRIGHTNESS” and “TINT ”you must be in CVBS mode. Parameter Adjustment Procedure 1. Enter Picture Quality Setting mode: Press the PIC button on the remote 2. Set Parameters: Press the ( / ) buttons on the remote or rotate the SMART DIAL clockwise/counterclockwise to adjust the selected feature to the desired setting. 3. Exit Picture Quality Setting Mode: Press the PIC button on the remote NOTE: There must be a video signal present on the AUX or CAMERA input to adjust the above settings. Parking Brake Inhibit 1. When the “PARKING” cable is connected to the brake switch, the display on the TFT monitor will display video only when the vehicle is stopped and the parking brake is applied. 2. Parking brake function is overridden when the video source is set to CAMERA. 3. When the “parking brake inhibit” is active, the front monitor displays “Caution” with blue background, preventing the driver from watching video while driving to reduce the risk of a traffic accident. Rear video screens are not affected. Please see “INSTALLATION SECTION” for installation. 10 Operation Instructions Power On / Off Press the POWER /VOL button to turn the unit on. You can also turn on the unit by pressing the button ( ) on the remote. Press and hold the POWER/VOL button on the front panel or press the POWER button ( ) on the remote to power off the unit. Playing Source Selection SRC SRC)) button on the remote Press the MENU Button on the front panel and use Smart dial; or the (SRC to change among available playing sources: TUNER, Disc, iPod, AUX IN 1, AUX-IN 2,CAMERA (rear view video camera), NAVI,Bluetooth,USB and SD Card. The playing mode is displayed on the TFT display. AUX IN Mode An external audio/video device can be connected to this unit via RCA cables(Front jack or rear RCA connector) to the “AUX-IN”. CAMERA Mode “CAMERA” mode is only available when the camera is connected and when backing up. To install a rear view video camera, connect the CAMERA video input cable to the rear view camera output cable. NOTE: If you have not connected a device to the unit, the source can not be selected. Example: If you have not connected an iPod to the unit, the iPod source will not be available. Volume Adjustment To increase or decrease the volume level, turn the POWER/VOL on the front panel or press the VOL+/ VOL- buttons on the remote control. The volume ranges from “0” to “40”. Audio Control Menu The Audio Control feature allows you to easily adjust your audio system to meet the acoustical characteristics of your vehicle, which vary depending on the type of vehicle and its measurements. To get the best possible sound quality from your new system, be sure to adjust the settings for the speakers as well. Proper setting of the Fader and Balance boosts the effects of the cabin equalizer. Accessing the Audio Control Menu SEL ) button on the remote Press the POWER/VOL button on the front panel or press the (SEL control to display the “Audio” menu. Selecting an Audio Feature for Adjustment Press the ( / ) buttons on the remote or press the POWER/VOL button on the front panel once to select a audio feature to be adjusted. Adjusting an Audio Feature Press the ( / ) buttons on the remote or rotate the POWER/VOL clockwise/counterclockwise to adjust the selected feature to the desired setting. 11 Audio Adjustments Audio Function Adjustable Range User Flat Jazz Pop Classical EQ BASS TREBLE FADE BAL SW Loudness -7 to +7 -7 to +7 -7 to +7 -7 to +7 -7 to +7 Off, or ON NOTE NOTE: The Bass and Treble levels are only adjustable when EQ is on “User” mode. The Loudness function compensates for deficiencies in sound ranges at low levels. Exiting the Audio Control Menu Press and hold the POWER/VOL button on the front panel to exit the audio control menu, or touch the return arrow on the top right of the display. ESC) button on the remote control to exit the audio control menu. Press the (ESC) -Channel Audio Control Five Five-Channel 5-Channel Audio Adjustments Item Adjustable Range Master Volume Front Left Channel Volume Front Right Channel Volume Rear Left Channel Volume Rear Right Channel Volume Subwoofer Volume 00 to 40 -10 to +10 -10 to +10 -10 to +10 -10 to +10 -10 to +10 Rear Zone If a monitor is installed in the rear zone and connected to the rear zone AV output, passengers in the back seat can control the DVD output using the rear zone remote control. Only the front zone is in DVD mode,then Rear zone DVD can be activated.Rear USB and SD is the same. System Reset To correct a system halt or other unusual operation, use the tip of a pen to press the RESET button located on the front top-left corner of the unit. After a system reset, the unit restores the settings before last power off. Mute The volume will be muted when the following cases occur: ) on the remote to mute the volume from the unit. • Manual: Press the MUTE button ( Or rotary the knob of smart dial and reduce the volue to "0" NOTE NOTE: Press the MUTE button on the remote again to restore the volume. Adjusting the volume or using any of the audio set-up features will cancel the mute function. Standby 1. Setup Standby mode on setup menu directly. 2. In the standby mode, the LCD is off with audio output only. 3. In the standby mode, the screen will return to normal through any operation. 12 System Setup Menu MAIN Menu There are three methods to access the MAIN menu. ·Press the MENU button on the front panel . ·Press the MENU button on the remote control. ·Touch the A area on the touchscreen. Note: Remote, Smart dial, touch screen operations and buttons on front panel are all useable to select menu and adjust settings. The following instructions will show the different ways to access menus and adjustments. Rear zone Menu Press M-zone icon to enter rear zone menu Note: Only the front zone is in DVD mode,then Rear zone DVD can be activated.Rear USB and SD is the same. Screen Setting Accessing the Screen Setup Menu � Press the Setup on the screen. � Select the "Other" Icon on the screen to access the Screen setup. Selecting a Feature for Adjustment Press the ( / ) buttons on the remote to select a feature to be adjusted. Rotate SMART DIAL clockwise/anticlockwise to select a feature to be adjusted. Touch directly the options on the screen to select a feature to be adjusted. 13 Adjusting a Featur Setting Options Function TS Calibrate No / Yes Set password ---- Rating 1.2.3.4.5.6.7.8 Screen Saver On / Off Touch to activate/deactivate the Screen Saver. Bluetooth On / Off Activation/deactivation of the integrated Bluetooth function. Antenna On / Off Select “On” to turn on tunning antenna. Load factory Yes / No Select “Yes” to restore the factory settings of the multimedia system (except for password and parental control). Touch “Yes” to enter the touch screen calibration mode. Enter a password of at least four characters to activate the parental control function. A lock symbol is used to indicate the parental control status Choose different ratings General setup Menu Accessing the General Setup Menu ·Select the General Icon on the screen to access the General setup. Selecting a Feature for Adjustment Press the direction buttons on the remote control or touch the option directly on the screen to select the feature to be adjusted. Adjusting a Feature OK) button on the 1. Enter the option field for the feature you want to adjust by pressing the (OK) remote or by pressing the SMART DIAL button. A submenu appears in a second row with the selected option. 2. Select a new value by pressing the direction button. OK) button or pressing the SMART DIAL button. The new 3. Confirm your selection by pressing (OK) value setup is complete. Adjusting the Clock 1. Access the “Clock” setting under the General Setup menu. 2. Press the direction button on the remote to move the cursor to the “Hour” or “Min” position, and OK) button. you also can touch the “Hour” or “Min” position directly. press the (OK) 3. The numeric keypad will pop up. 4. Press the numeric button on the remote control or touch the numeric keypad on the screen to adjust the hour or minutes. OK) button on the remote control or on the keypad of the screen to confirm setup. 5. Press the (OK) 14 Return to normal playback The system will automatically return the previous playback mode that it was in before accessing the setup menu 20 seconds after the last operation. Setting Radio Clock Clock Mode Version Options Function USA S-America1 S-America2 Europe Korea China Arabia Select the appropriate setting based on the country in which you reside. (HH:MM) See “Adjusting the clock” to learn how to set the clock. 12Hr Clock displays 12 hour time using AM and PM. 24Hr Clock displays 24 hour time up to 23:59 Version display Video Accessing the Video Setup Menu ·Select the video Icon on the screen to access the video setup. Selecting a Feature for Adjustment Press the direction buttons on the remote control or touch the option directly on the screen to select a feature to be adjusted. Adjusting a Feature OK) button on the 1. Enter the option field for the feature you want to adjust by pressing the (OK) remote or by pressing the SMART DIAL DIAL. A submenu appears in a second row with the selected option. 2. Select a new value by pressing the direction button. OK) button on the remote control or pressing the SMART 3. Confirm your selection by pressing (OK) DIAL on the front panel. The new setup is complete. Return to normal playback The system will automatically return the previous playback mode that it was in before accessing the setup menu 20 seconds after the last operation. 15 Setting Options Function TV Shape 16:9 4:3 Select the appropriate setting based on the country in which you reside. The video output is switched automatically based on the current disc. The video output is in the standard NTSC format The video output is in the standard PAL format The video output is in the standard SECAM format Auto Video format NTSC PAL SECAM uration Menu ASP(Audio Signal Processing) Config Configuration The ASP Configuration menu allows you to make fine audio adjustment. uration Menu Configuration Accessing the ASP Config MENU) button on the remote control to � Press the MENU on the front panel or press the (MENU) access MAIN menu.. Selecting a Feature for Adjustment Press the direction buttons on the remote control or touch the option directly on the screen to select a feature to be adjusted. Adjusting a Feature OK) button on the 1. Enter the option field for the feature you want to adjust by pressing the (OK) SMART DIAL remote or by pressing the DIAL. A submenu appears in a second row with the selected option. 2. Select a new value by pressing the direction button. OK) button on the remote control or pressing the SMART 3. Confirm your selection by pressing (OK) DIAL on the front panel. The new setup is complete. Return to normal playback The system will automatically return the previous playback mode that it was in before accessing the setup menu 20 seconds after the last operation. Setting Bass Freq Treble Freq Options 60Hz 80Hz 100Hz 200Hz 10KHz 12.5KHz 15KHz Function Depending on the audio source, select the Bass Center Frequency to achieve the best Bass effect. Depending on the audio source, select the Treble Center Frequency to achieve the best Treble effect. 16 17KHz 80Hz Sub Filter 120Hz 160Hz Bass Q-Factor 1.0 1.25 1.5 2.0 Selecting a crossover frequency sets a cut-off frequency of the subwoofer’s LPF(low-pass filter) and the “SMALL” speakers’ HPF (high-pass filter). The Crossover frequency setting has no effect if the subwoofer is set to “Off” and any other speaker is set to “Large”. When the Bass Center Frequency is selected, adjusting the Bass Q-Factor alters the sharpness of the Bass output. Language Menu uration Menu Accessing the ASP Config Configuration MENU) button on the remote control to access Press the MENU on the front panel or press the (MENU) MAIN menu.. Selecting a Feature for Adjustment Press the direction buttons on the remote control or touch the option directly on the screen to select a feature to be adjusted. Adjusting a Feature 1. Enter the option field for the feature you want to adjust by OK) button on the pressing the (OK) remote or by pressing the SMART DIAL DIAL. A submenu appears in a second row with the selected option. 2. Select a new value by pressing the direction button. OK) button on the remote control or pressing the SMART 3. Confirm your selection by pressing (OK) DIAL on the front panel. The new setup is complete. Return to normal playback The system will automatically return the previous playback mode that it was in before accessing the setup menu 20 seconds after the last operation. Setting Options OSD language Language Subtitle Audio Function English / Russian English Spanish Russian Auto Off English / Russian 17 Tuner(FM/AM) Operation Tuner TFT Display 1. : Touch to change among the following bands: FM-1, FM-2, FM-3 and AM. 2. : Touch to seek down. 3. : Touch to seek up. 4. : Touch to tune down once a step. 5. : Touch to tune up once a step. 6. : Touch to activate/deactivate Scan Mode 7. : Auto store 8. :Program scan 9. :Touch to display the numeric keypad on the screen Switch to Radio Tuner source Press the remote control to switch to the Tuner source. Select FM/AM Band Touch the button on the screen, or press the BAND button（ change among the following bands: FM-1, FM-2, FM-3 and AM. ）on the remote control to Auto Tuning Press the button ( ) on remote control or touch the button on the screen to seek the next available channel by increasing the tuning frequency. Press the button again to stop searching. Press the button ( ) on the remote control or touch the button on the screen to seek the next available channel by decreasing the tuning frequency. Press the button again to stop searching. 18 Manual Tuning Press the button on the remote control or touch the frequency one step at a time. button to increase the tuning Press the button on the remote control or touch the frequency one step at a time. button to decrease the tuning Using Preset Stations 12 numbered preset buttons store and recall stations for each band. Front 6 stored stations (P1P6) for the current band appear on the screen, touch the channel directly for use. You can touch the arrow buttons or on the screen to see the other 6 stations. Storing a Station 1. Select a band (if needed), then select a station. 2. Touch and hold an on screen preset button (6) for three seconds. The preset number appears at the top of the screen. Recalling a Station 1. Select a band (if needed). 2. Touch an on-screen preset button (6) to select the corresponding stored station. Auto Store (AS) Press AS button on the screen to automatically scan and store all stations in current band. Program Scan (PS) 1. press the PS button on the screen.scan the stations in the 12 preset channels in the current band. 2. Touch the button on the screen to automatically scan all stations in current band to preview stations. Press any button to stop scanning and listen to the selected station. 3. DX and Loc Stations Seeking (LOC) When the Local function is on, only radio stations with a strong signal are tuned. When the Local function is active, “LOC” appears on the screen and an indicator is illuminated. To activate the Local function in AM/FM tuner mode, touch the Touch the to Activate the DX function 19 button on the screen . DVD Player Operation NOTE NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays caution information with a blue background. Rear video screens, if applicable, will operate normally. Insert/Eject Disc ting a Disc Inser Inserting When inserting a DVD disc, DVD mode is entered and disc play begins. NOTE: If Parental Lock (Rating) is activated and the disc inserted is not authorized, the 4-digit NOTE code must be entered and/or the disc must be authorized (see “RATING (Parental Lock) Menu”). You cannot insert a disc if there is already a disc in the unit or if the power is off. NOTE NOTE: CD-R/RW, DVD-R/RW, DVD+R/RWs will not play unless the recording session is closed. Ejecting a Disc Press the button on the unit to eject the disc. The unit automatically reverts to Tuner mode at the same time. Reset the Loading Mechanism If the disc loads abnormally or does not play properly, press and hold the button on the unit to reset the loading mechanism. The disc is ejected and normal operation resumes. Accessing DVD Mode To switch to DVD mode when a disc is already inserted, press the SRC button on the front panel or on the remote control till DVD appears at the top of the screen. Using the Touch-Screen Controls 1. 2. 3. 4. 5. 6. 7. Touch to Play/Pause Touch to stop Touch to fast reverse Touch to fast forward Touch to repeat playback Touch to repeat from A to B. Select the repeat point A wherever you want to start and the point B wherever you want to end, then, DVD displays from A to B continually. Touch to switch among LEFT, RIGHT and STEREO. 20 8. 9. Touch to return to DVD main menu Touch to display Sub-title Controlling Playback Stopping Playback Touch the stop button on the screen or press the ( OK) button on the on the screen or the (OK) stop DVD play; touch the play/pause button remote control to resume disk play. Pausing Playback Touch the play/pause button Repeat Playback ) button on the remote control to on the screen to suspend or resume disc play. Press the Repeat button on the screen or on the remote control to alter repeat mode according to the following: • DVD: Repeat Title, Repeat Chapter, Repeat Off • VCD (PBC Off): Repeat Single, Repeat Off • MP3: Repeat Single, Repeat Folder, Repeat All, Repeat Off NOTE NOTE: For VCD play, the repeat function is not available if PBC is on. PBC (Play back Control) (VCD Only) For VCD with play back functionality, play back control (PBC) provides additional controls for VCD playback. ROOT) button on the remote control to toggle the PBC function “On”/”Off”. Once PBC Press the (ROOT) is on, playback starts from track one of the play list. NOTE NOTE: When PBC is activated, fast forward, slow playback, and previous/next track are available. Repeat and direct track selection are not available. When PBC is activated, selecting random, scan, or search playback automatically deactivates PBC. Sectional Repeat Function (A-B) Use the A-B function to define a specific area of a disc to repeat. • Press the Repeat A-B button ( ) on the screen or on the remote control to set the start point (A) of the repeated section. • Press the Repeat A-B button ( ) again once you reach the desired end point (B) of the repeated section. The selected portion of the DVD will now repeat continuously. • Press the Repeat A-B button ( ) again to cancel the A-B section setting and stop repeat play. Accessing the DVD Menu 1. 2. 3. 4. You can touch the area F, and then touch the button to recall the main DVD menu. Use the arrow buttons on the remote to select a title from the menu. TITLE Press the (TITLE TITLE)) button on the remote control to select a different title for playback. OK) button on the remote control or touch the item directly to confirm your Press the (OK) selection and begin playback. Moving Through Chapters Press the ( ) button on the remote control to advance to the next chapter on the DVD. Press the ( ) button on the remote control to move to the previous chapter on the DVD. Touch the right side of the screen to advance to the next chapter, or touch the left side of the screen to move to the previous chapter. Fast Forward/Fast Reverse Press the ( ) button on the remote control or touch the of area E on the screen to fast forward. Keep pressing or touching and releasing the button to increase the rate from “X 2” to “X 4”, “X 8”, and “X 16”. Press the ( ) button on the remote control or touch the of area E on the screen to fast reverse. Keep pressing or touching and releasing the button to increase the rate from “X 2” to “X 4”, “X 8”, and “X16”. 21 Selecting 2-Channel and 5-Channel Audio Playback 2-Channel Audio (Down Mix) Support for CD, SD Card and DVD Linear pulse code modulation (LPCM) and pulse code modulation (PCM) support is available for CD, SD Card and DVD discs when 2-channel audio is selected. 5- Channel Audio Support for CD, SD Card and DVD Surround I is available for decoding analog or digital 2- channel down mixed sources. Surround II is available for decoding digital bit-stream sources. NOTE NOTE: Only 2-Channel audio support is available for AM / FM tuner, TV tuner and Auxiliary input. Table 8: Speaker Output Options Speaker Setup 2CH mode Play 2CH audio in 5CH mode with surround “off” Play 2-channel (DownMix) audio in 5-channel mode with surround “on” Play 6-channel audio in 5-channel mode with surround “on” Front speaker Rear Speaker Center Speaker SubWoofer GOTO Search During DVD or VCD playback, perform the following steps to use the GOTO feature to access a specific location on a disc: 1. Press the( -/--) button on remote control or touch Area F on the screen to enter “GOTO” mode. 2. Press the ( / ) buttons on the remote control to select a category. • For DVD mode, you can choose Time or Title/ Chapter search. • For VCD mode, press the( -/--) button to choose between Track Search, Disc Search and Exit. Search Title ____ Chapter Time __/__ _:_:_ Track Search Time Track -- : -- : -- --- / --- Disk Search Time Track DVD Search Time – Go to specific time in current title Title/Chapter – Go to specific time in a chapter -- : -- : -- ---- / -- VCD Track Search Time – Go to specific time in the current track Track – Go to specific track VCD Disc Search Time – Go to specific time on disc Track – Go to specific track 3. Touch the( -- : -- : -- ) )/ (---- / -- ) area on the screen to display a numeric keypad on the touch screen. 22 4. Enter a time/Track number into the field using the numeric keypad on the remote control or on the screen. 5. Press the OK button on the remote control or on the touch screen to go to the specified location on the disc. 6. Press the ( -/--)button on the remote control or touch the F Area on the screen again to exit. Direct Chapter / Track Selection During DVD, VCD and CD playback, you can use the numeric keypad on the remote control to access a track directly. Viewing an Alternate Picture Angle (DVD Only) Some DVDs contain scenes that have been shot simultaneously from different angles. For discs ANGLE recorded with multiple angles, press the (ANGLE ANGLE)) button on the remote control to toggle available angles of the on-screen image. Zooming Press the ZOOM button on the remote control to enlarge and pan through the video image using the following options: “Q1”, “Q2”, “Q3”, and “OFF”. Multi-Language Discs (DVD Only) Changing Audio Language AUDIO If you are watching a disc recorded in multiple languages, press the (AUDIO AUDIO)) button on the remote control to choose a language. You also can touch area E, and then touch the button. AUDIO NOTE NOTE: During VCD playback, press the (AUDIO AUDIO)) button on the remote control to choose between Left Channel, Right Channel, and Stereo. Changing Subtitle Language SUBT If you are watching a disc recorded in multiple languages with subtitles, press the (SUBT SUBT)) button on the remote control to choose the language in which you would like the subtitles to appear. You also can touch area E, and then touch the button. Playback Information INFO During DVD and VCD playback, press the (INFO INFO) button on the remote control or touch area B to display playback information on the screen, including the media playing and current playback time. DVD Playback Information The following information is displayed at the middle of the screen during DVD playback: 23 1 indicates Current playing source. ○ 2 ○ 3 Indicates the playback time of the current title. ○ 4 Indicates the status of subtitle ○ 5 Indicates the audio channel ○ 6 Indicates velocity ○ 7 Indicates angle ○ 8 Indicates chapters on the DVD is currently playing. ○ 9 Indicates the third of 3 titles on the DVD is currently playing. ○ VCD Playback Information The following information is displayed at the middle of the screen during VCD playback: 1 indicates Current playing source. ○ 2 ,○ 3 Indicates the playback time of the current title. ○ 4 Indicates the second of 15 tracks on the DVD is currently playing. ○ 24 General Disc Information Symbol 12cm Disc Properties Max Play Time Single side single layer (DVD-5) Single side double layer (DVD-9) Double side single layer (DVD-10) Double side double layer (DVD-18) (MPEG 2 Method) 133 minutes 242 minutes 266 minutes 484 minutes Single side single layer (VCD) (MPEG 1 Method) 74 minutes Single side single layer 74 minutes Disc Symbols Symbol Meaning Number of voice languages recorded. The number inside the icon indicates the number languages on the disc (maximum of 8). Number of subtitle languages available on the disc (maximum of 32). Number of angles provided (maximum of 9). Aspect ratios available. “LB” stands for Letter Box and “PS” stands for Pan/Scan. In the example on the left, the 16:9 video can be converted to Letter Box video. Indicates the region code where the disc can be played. • Region 1: USA, Canada, East Pacific Ocean Islands • Region 2: Japan, Western Europe, Northern Europe, Egypt, South Africa, Middle East • Region 3: Taiwan, Hong Kong, South Korea, Thailand, Indonesia, South-East Asia • Region 4: Australia, New Zealand, Middle and South America, South Pacific Ocean Islands/ Oceania • Region 5: Russia, Mongolia, India, Middle Asia, Eastern Europe, North Korea, North Africa, North-West Asia • Region 6: Mainland China • ALL: All regions 25 CD/MP3/WMA/JPEG Operation Instructions for Insert/Eject, Play/Pause, Stopping Playback, Track Selection, Fast Forward/Fast Reverse, Scan, and Random Play are the same for DVD, CD and MP3 operation. Please see the DVD Player Operation section for information about these topics. The file naming formats listed below are compatible with this unit: • ISO 9660 – file name: 12 characters, file extension: 3 characters • ISO 9660 – file name: 31 characters, file extension: 3 characters • Joliet – 64 characters If the file or folder name does not conform to ISO 9660 file system standards, it may not be displayed or played back correctly. CD Player User Interface 1: Previous track 2: Touch to fast backward current track 3: Play 4: Touch to fast forward current track 5: Next track 6: Current track and total number of tracks on disk 7: Elapsed playing time 8: Previous page display of TFT 9 :Next page display of TFT 10: Touch to activate/deactivate Random Mode 11: Touch to activate/deactivate Repeat Single Mode 12: Touch to display the numeric keypad on the screen and then you can use the numeric keypad to access a track directly. 13: Touch to activate/deactivate Scan And you can press the (Title) button on the remote control to toggle the scan function “on/off” 14: Touch to stop disc playback 15：Volume indicator 26 Playing CD Files After inserting a CD disc, files will play in the sequence of the directory. In playing back, you can press the numeric button on the remote control or touch a track on the onscreen directly to play. Fast backward/fast forward Touch the or on the screen to Fast backward or fast forward play. MP3/WMA Discs This player allows you to playback MP3/WMA files recorded on CDROM, CD-R, CD-RW, DVD+R/RW and DVD-R/RW. For CD-RW discs, please make sure they are formatted using the full method and not the quick method to prevent improper disc operation. Use the following settings when compressing audio data for your MP3 disc: • Transfer Bit Rate: 320kbps • Sampling Frequency: 48kHz When recording MP3 up to the maximum disc capacity, disable additional writing. For recording on an empty disc up to maximum disc capacity, use the "Disc at once" setting. The touch keys for MP3/WMA CD/DVD playback are described below. 1. : Touch to display previous folder 2. : Touch to display next folder Playing MP3/WMA Files After inserting a MP3/WMA disc, files will play in the sequence of the directories/folders. In playing back, you can press the numeric button on the remote control or touch the a track directly to play. Change Directory/Folder Touch the or on the screen to navigate through the directories/folders. Previous/Next Page Touch the or on the screen to navigate through the pages/files. 27 JPEG picture 1. Browse picture via Anti-clockwise 2. Browse picture via Clockwise 28 iPod Operation Accessing iPod Mode SRC) button on the 1. To switch to iPod mode, press the Menu button on the front panel or the (SRC) remote control repeatedly until iPod appears at the top left corner of the screen. 2. Select the Main menu, then touch the iPod icon to select iPod as your source. iPod Instructions The touch keys on the screen for iPod playback are described below. 1. :Back to previous directory 2. :Go to root directory 3. :Enter iPOD Vedio(Only for old certain iPod model) Playback of video on iPod For playback of video on iPod, press the button to enter, the touch screen will display the following. If there are videos on iPod and you select them on iPod, they will start to play, otherwise there will be nothing on the display. However, you can return to listen to your music by pressing the button again. NOTE: All video control functions are done on the iPOD video, the touchscreen only controls audio portions of iPOD functionality. 29 USB operation Accessing USB Mode SRC) button on the 1. To switch to USB mode, press the Menu button on the front panel or the (SRC) remote control repeatedly until USB appears at the top left corner of the screen. 2. Select the Main menu, then touch the USB icon to select USB as your source. USB Instructions The touch keys on the screen for USB playback are described below,Icons defination see other modes. 30 SD operation Accessing SD Mode SRC) button on the 1. To switch to SD mode, press the Menu button on the front panel or the (SRC) remote control repeatedly until SD appears at the top left corner of the screen. 2. Select the Main menu, then touch the SD icon to select SD as your source. USB Instructions The touch keys on the screen for SD playback are described below,Icons defination see other modes. 31 Navigation Operation Accessing Navigation 1. Access the MAIN menu and select the NAVI button on the touch-screen to enter the Navigation Operation interface. 2. Press the remote control to switch the source to Navigation. 3. Press NAVI button on the front panel of the unit. Navigation Operation Please read the Navigation Software User Manual Follow the instructions on loading mapping information from the DVD-ROM to the SD Card in the Navigation Software User Manual. This must be done prior to loading the SD Card into the Navigation Unit. Listening to an Audio program while using/viewing the Navigation You can listen to an audio program while using Navigation. To do so, do the following: Select the audio source. The source can be the Tuner, Satellite Radio, iPod or the audio from the AUX input. Touch the NAVI button on the front panel to select Navigation. The map will be shown on the TFT display, and audio will continue to play while you are in the Navigation mode. Navigation voice prompts will mute the audio source, give the instruction, and then return to the audio source To adjust a parameter of the audio source (i.e., select a different radio station), touch the NAVI button. This will return you to the audio source screen. Make your adjustments, and then press the NAVI button to return the Navigation function. Navigation will continue while you are in an audio source screen, and voice prompts will continue while you make adjustments. 32 Bluetooth Operation Before using the Bluetooth Before using the Bluetooth, it’s necessary to perform the following steps. For more operating details, refer to each section below. 1. Select the “Bluetooth” option in the General setup and select the “On” option to activate the Bluetooth feature. 2. Pair your mobile phone to this unit (refer to the “Pairing” operation). It is necessary to pair your phone to the unit. Without pairing, Bluetooth is not available. The Bluetooth Indicator There is a Bluetooth indicator at the top of the touch screen. When the Bluetooth function is “Off”, the indicator is grey. When the Bluetooth function is “On” and no phone is connected to the unit, the indicator will blink. If a phone has been connected to the unit, the indicator is on solid. Accessing Bluetooth Mode Touch the button at the top of the touch screen to access Bluetooth mode directly. Bluetooth User Interface Dial Interface 33 1 ○ Current source indicator。 ○ Touch to return to the previous menu. ○ Touch to access the dial interface. ○ Touch to access the Phone book. ○ Touch to access A2DP control menu. ○ Touch to access Bluetooth setup. Phone Book Press the button to access the Phone Book. You can see phone book list, SIM book list, dialed call list, received call list, missed call list. If the number has been stored in the Phonebook, it can be accessed by touching or on the screen to navigate through the Phone Book entries. Then, touch the number to initiate the phone call NOTE: Not all Bluetooth enabled phones support this feature Bluetooth setup Select the button to access the Bluetooth setup. LANGUAGE Menu Features Setting Options Off Pairing Handsfree Function Press the “Handsfree” button to start to wait for pairing with one phone without A2DP. Press the “AV Unit” button to start to wait for AV Unit Off pairing with one phone within A2DP. Answer an incoming call manually. The unit will automatically answer an incoming Auto Answer On call (based on the cell phone Bluetooth functions) 34 Manual If this function is set to Auto, connection between the Last Used phone and this unit will take place Connect Auto automatically as soon as the devices are less than a few meters apart. Pairing Access the Bluetooth setup and press “Handsfree” or “AV Unit”option on the screen, then “Wait pairing” displays on the screen. Now you can pair a phone with the unit. This unit can pair with 5 mobile phones in all, but just one can be active at a time. The Default phone will be retained only if all other paired phones are deleted. (Default Phone: The phone that was first paired with the unit.) When maximum pairing has been completed, that is, four mobile phones have been connected with the unit, and you want to still pair a new one, then the system will retain the default phone and last used phone used. The phone least used (except the default phone) will be deleted and the new paired phone will become the last used phone. (Last Used Phone: The phone connected with the unit that was used last.) If you want pair your phone with the unit, the password 1234 is used to complete the pairing. When asked, enter this password in the phone you are pairing with this unit. Note: when you press “handsfree”, the unit won’t activate A2DP function. Auto Connect If the unit has been set to auto connect, it will attempt to connect to the last used phone first. If Auto Connect is not activated, the unit will return to the previous operating mode. When the phone connects to the unit successfully, all of the cell phone’s Bluetooth enabled options will be active. Making a phone call There are four ways to make a phone call from this unit: 1. Make use of the Number dial on the screen to make a call. 2. You can enter the phone number using the numeric keypad and press the OK button on the remote control to make a call. (must be in the Bluetooth mode) 3. You can open the phone book and select one to make a call directly. (Your cell phone must support this option) 4. If your phone supports voice dial, access this mode on your phone instead of using the Phonebook Answering an incoming call You can answer an incoming call even if the source other than the telephone is selected. You can answer an incoming call automatically or manually (refer to Bluetooth setup and the Controls and Indicators title (Button Operation) for exact instructions) When a call comes in, this interface will display on the screen: 35 End a call Touch the button to end a call. 36 Troubleshooting Problem GENERAL Unit will not power on Remote control does not function No/low audio output Poor sound quality or distortion Unit resets itself when engine is off TFT MONITOR No image Flashing image or interference appears on screen Prolonged image or improper height/width ratio display TUNER Weak station searching Cause Corrective Action Radio Fuse blown Car battery fuse blown Illegal operation Install new fuse with correct rating Install new fuse with correct rating Press the RESET button located in the bottom right corner of the front panel Replace battery with new one Remove battery and install correctly Check wiring and correct Battery depleted Battery installed incorrectly Improper audio output connection Volume set too low Improper “MUTE” connection Speakers damaged Heavily biased volume balance Speaker wiring is in contact with metal part of car Unauthorized disc is in use Speaker power rating not compatible with unit Speaker is shorted Incorrect connection between yellow memory wire and positive battery wire Increase volume level Review wiring diagram and check “MUTE” connection Replace speakers Adjust the channel balance to the center position Insulate all speaker wiring connections Use original copy Connect proper speakers Check speaker connections Check wiring and correct Incorrect connection to parking brake wire PRK SW is activated and parking brake is not engaged DVD is not compatible with current TV system settings Improper video signal connections Improper aspect ratio setup Check wiring and correct Auto antenna is not fully extended Auto antenna not properly connected LOCAL function is activated Connect the auto antenna control cable properly Connect the auto antenna control cable properly Turn LOCAL function off Disc already inside unit Eject current disc and insert new one Disc is warped or scratched Disc is dirty or wet Incompatible disc is used Disc rating exceeds Parental Lock rating limit Disc region code is not compatible with unit Use disc in good condition Clean disc with soft cloth Use compatible disc Change Parental Lock settings to lower restriction Use disc with proper region cod Stop vehicle in safe place and apply parking brake Change setup to accommodate disc Check wiring and correct Use correct aspect ratio setting DISC Cannot insert disc Disc does not play back 37 Image blurred, distorted, or dark PBC cannot be used during VCD playback No repeat or searching while playing VCD MP3 Interruption occurred during playback Incorrect playback message displayed Error Messages Message Displayed Loading No Disc Bad Disc Unknown disc Region Error Error Disc is inserted upside down Disc is illegally copied Insert disc with label side up Use original disc PCB is not available on the disc PCB is on Turn PCB off Disc is dirty or scratched Clean disc or replace File is damaged/bad recording Message is longer than LCD can display Recreate disc with good files Cause Corrective Action Disc is being read Disc is dirty Disc is upside down Disc not present in loading compartment Disc is dirty Disc is upside down Disc format is not compatible with this unit DVD is not compatible with region code of unit illegal mechanism operation 38 Clean disc with soft cloth Insert disc with label side up Insert disc Clean disc with soft cloth Insert disc with label side up Press EJECT key for 5 seconds to reset loading mechanism Remote control Remote control does not function Battery is covered with insulation tape Battery depleted Battery installed incorrectly Pull out the insulation tape Replace battery with new one Remove battery and install correctly 1. When using the remote for the first time, you must pull out the insulation tape. 2. Remove the battery if the remote control is not used for a month or longer. Remove and dispose of the old battery immediately. Do not store the battery with metallic materials. 3. Inserting/Replacing the Battery: Remove the battery holder Remove the battery from the battery holder 39 Install the battery Insert the battery holder NOTE: Use only one CR2025(3V) lithium battery. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Do not recharge, disassemble, heat or dispose of the battery in fire. Keep batteries away from children to avoid the risk of accident. Suggestions 1. Only use a piece of clean silicone cloth and neutral detergent to clean the front panel or monitor. A rough cloth and non neutral detergent (such as alcohol) may result in scratching or discoloration. 2. Keep off water and other liquid things. 3. If the temperature inside the player gets too high, a protective circuit automatically stops playing the disc. And then, please wait for the unit to cool down before operating the player again. 4. Never insert anything other than a 5” (12 cm) compact disc into the player as the mechanism can be damaged by foreign objects. 5. Do not attempt to use a 3” (8 cm) CD-Single disc in this unit, either with or without an adaptor, as it will damage the player and disc. Such damages are not covered by the Warranty on this product. 6.When the vehicle warms up during cold weather or under damp conditions, condensation may appear on the LCD panel. If this occurs, the screen will not operate properly until the moisture has evaporated. 7.We suggest that you should clean the discs used in this unit more frequently than used in your home, because of the environmental conditions of the vehicle. 40 Specifications CEA Power Ratings Main Amplifier Power Output: 20 watts RMS X 4 channels into 4-ohms @ < 10% THD+N Signal to Noise Ratio: 70dBA below reference. (Reference: 1 watt, 4-ohms) MAX Power: 40 X 4 watts into 4-ohms, all channels driven Frequency Response: 20Hz to 20kHz, -3dB. Aux input used as source reference Reference Supply Voltage: 14.4VDC DVD/CD Player Compatible formats: DVD-R, DVD-RW, DVD+R, DVD+RW,CD-R, CD-RW, CD-DA, MP3, WMA, HDCD, SVCD, VCD,MPEG, JPEG, MP3/WMA files burned onto a DVD+R/W or DVD-R/W and CD-R/RW Signal to Noise Ratio: 85dBA Dynamic Range: >95dB Frequency Response: 20Hz to 20kHz, -3dB Channel Separation: > 60dB @ 1kHz D/A Converter(s): 6-channel high performance 24-bit, 192kHz, multi-bit Sigma Delta modulation. DAC supports sample rates from 8~192kHz. Electronic Skip Protection (ESP):DVD: 2-3 sec, CD-DA: 10 sec, MP3: 100 sec, WMA: 200 sec (ESP time is approximate) Mechanical anti vibration ability: 10~200Hz, X/Y/Z direction: 1.0G Video Section Format: NTSC, PAL (auto-detection) Output: 1Vp-p (75-ohm), buffered Input: 1Vp-p (75-ohm) FM Tuner Section Tuning Range: 87.5MHz - 107.9MHz Mono Sensitivity (-30dB): 10dBu Quieting Sensitivity (-50dB): 15dBu Alternate Channel Selectivity: 70dB Signal to Noise Ratio @ 1kHz: 58dB Image Rejection: 60dB Stereo Separation @ 1kHz: 30dB Frequency Response: 30Hz - 15kHz, -3dB AM Tuner Section Tuning Range: 530kHz - 1710kHz Sensitivity (-20dB): 20dBu Signal to Noise Ratio @ 1kHz: 50dB Image Rejection: 60dB Frequency Response: 50Hz - 2kHz, -3dB Integrated SD Card Reader Monitor Section Screen Size: 6.5" (Measured diagonally). Screen Type: TFT Liquid Crystal Display (LCD) active matrix Response Time: 30mSec rise time, 50mSec fall time Resolution, DVD/Composite Video in: 280,280 sub pixels, 1200 (W) X 234 (H) Viewing angle: • 60 degrees left or right • 30degrees up • 60 degrees down General Auxiliary Input impedance: 10k Power Supply: 10.5 to 16V DC, negative ground Fuse: 10-amp, mini ATM type DIN chassis dimensions: 7" X 7" X 2" (178mm x 178mm x100mm) * Specifications subject to change without notice. 41
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Page Mode : UseOutlines XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2009:08:10 15:14:24+08:00 Creator Tool : WPS Office 2007 专业版 Modify Date : 2010:11:24 14:06:58-08:00 Metadata Date : 2010:11:24 14:06:58-08:00 Format : application/pdf Creator : fxzm Title : Contents Producer : PDFlib 7.0.3 (C++/Win32) Document ID : uuid:b4f5fd45-6472-4f39-af73-5dcc08dd9a61 Instance ID : uuid:5356c268-5d70-45c7-8b53-dca0a54cfa0b Has XFA : No Page Count : 42 Author : fxzmEXIF Metadata provided by EXIF.tools