SKYPINE ELECTRONICS SD9614SV CAR DVD ENTERTAINMENT CENTER (BLUETOOTH PORTION ONLY) User Manual SD 9614 SV

Download:
Mirror Download [FCC.gov]
Document ID	939329
Application ID	+vwBdIkl9Z8mAVNb3IqQbw==
Document Description	USERS MANUAL 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	157.74kB (1971697 bits)
Date Submitted	2008-05-09 00:00:00
Date Available	2008-05-09 00:00:00
Creation Date	2008-01-24 14:21:28
Producing Software	Corel PDF Engine Version 1.0.0.458
Document Lastmod	0000-00-00 00:00:00
Document Title	SD-9614-SV.cdr
Document Creator	CorelDRAW 版本 12.0
Document Author:	JUJUMAO

System SCREEN Setup Menu
Setting TFT Brightness
Screen Setup Menu
This will set the default setting for the TFT display brightness, this setting can also be set by pressing the
INFO button on the front TFT panel.
Step 1) Touch top left
corner of screen
Press the SCREEN Setup button to access the SCREEN SETUP mode
Select desired parameter you wish to change
Page will return back to previous screen after 10 seconds of inactivity or by pressing the RETURN button
Adjusting a Feature
Settings
Default
Options
Brightness
10
0 to +20
Screen Tilt
1-6
Screen
Saver
On
Touch
Screen
No
Calibration
Version
On
Off
No
Function
Step 2) Touch SCREEN
setup button
Press the < / > buttons on the remote or rotate the
ENTER button clockwise / count-clockwise to adjust
the BRIGHTNESS to the desired setting
Select 1 to 6 to adjust the default tilt angle of the screen
Select On to activate the screen saver, Off to deactivate
Touch "Yes" to enter the Touch Screen calibration mode
Yes
Software version of unit
Step 3) Touch [-] to DIM
TFT
0 to + 20 is possible
Step 4) Touch [+] to
brighten TFT
Default = 10
To conserve the LCD backlight lifespan or to stop annoying glare while night driving, press STANDBY, the
TFT screen only will black out, however all other operations are still possible, press any button except
VOLUME or touch screen again to return normal viewing.
38
39
Step 5) Touch HOME to exit
Step 3) Touch NO in TS Calibration row.
Step 4) Then press YES.
Step 5) Touch and hold the pointer A.
Step 6) Next, touch and hold the pointer B.
Setting TFT Angle
Set for best viewing angle in your vehicle
Step 1) Touch top left corner of screen
Step 2) Touch SCREEN setup button
Step 3) Touch a number displayed in
Step 4) Touch desired angle for best viewing angle
SCREEN TILT row
Step 7) Touch and hold the pointer C.
Step 8) Touch and hold the pointerD.
1 -6 is possible
Default = 4
Step 5) Touch HOME to exit
Touch Screen Calibration
On occasion the touch screen will have to be calibrated, follow these few steps as described
Step 1) Touch top left corner of screen.
Step 9 ) Touch RETURN to exit
Step 2) Touch SCREEN setup button.
40
41
DVD Menu
DVD setup menu
Press to select desired disc menu language
DVD Setup Menu - Language
Notes:A DVD disc must be inserted to access these functions and features.
Language Setup Menu
ENGLISH = DEFAULT
With the monitor open in DVD mode, press the AREA A (top left screen) to display the MAIN menu bar.
Press DVD Setup to access the DVD setup menu.
DVD Setup Menu - Video
Note:A DVD disc must be inserted to access these functions and features.
Video Setup Menu
With the monitor open in DVD mode, press the AREA A (top left screen) to display the MAIN menu bar.
Press DVD Setup to access the DVD setup menu.
Press LANGUAGE icon to select LANGUAGE setup page.
Disc Subtitle
Press to select desired disc subtitle language.
ENGLISH
ON
OFF=DEFAULT
Press VIDEO icon to select from the following menus:
TV Shape
Press to select desired TV Shape.
Subtitle Language
Press to select desired disc audio language.
ENGLISH = DEFAULT
42
43
Angle Mark
Press RATING icon to select from the following menus:
Press to select desired Angle Mark.
Enable Parental Lock Password
Press ---- to enter a your desired password.
Video Mode
Press to select desired Video mode.
Setting Parental Lock Password
FILL
1. Enter a 4-digit code
ORIGINAL
2. Write the code down
H FIT
3. Save in a safe place
W FIT
Rating Setting
FIT TO SCRN
Press to select desired Rating Setting.
PAN SCAN
1. Kid Safe
OFF
2. G
3. PG
4. PG-13
DVD Setup Menu- Ratings
5. PG-R
6. R
7. NC-17
Note:A DVD disc must be inserted to access these functions and features.
8. Adult
Ratings Setup Menu
With the monitor open in DVD mode, press the AREA A (top left screen) to display the MAIN menu bar.
Parental Password Override
Press DVD Setup to access the DVD setup menu.
In the event you forget or loose your PARENTAL LOCK password, enter 9991
44
45
46
47
Check connections at speakers
Insulate all bare speaker wires from each other
and chassis ground
Check for pinched wire
Check for pinched wire
Use fuse with correct rating
Speaker wires not connected
One or more speaker wires touching each
other or touching chassis ground
Yellow or red wire touching chassis ground
Speaker wires touching chassis ground
Incorrect fuse rating
The attempted pairing process has failed
Pairing Fail appears
in display
Disconnect current mobile device first, then connect
the desired mobile device
A mobile device is already connected to the
head unit. This time the head unit can only
be connected to one device at a time
Retry the pairing process again
Pair the mobile device within 120 seconds
Refer to owner's manual of your mobile device
Bluetooth function is not active on
the mobile device
The time limit for the pairing mobile device
has been reached
Activate Bluetooth function in General Setup
Bluetooth function is not active
on the head unit
Reset Radio
Pair and or connect a mobile device to the head unit as
described under Bluetooth Operation
ERROR! Connect Timeout
appears on display
Mobile device will not
connect to the head unit
Please connect first appears
in the display
Bluetooth
Change iPod video settings to TV Out Check yellow RCA
cable from the inport adapter to the radio
Check connection of the inport adapter to
rear of radio or connection of iPod to inport adapter
There is no mobile device connected
to the head unit
Wrong iPod Video Settings
Cannot see video and
photo media on TFT screen
All other errors
Incorrect cable connections
Message is longer than LCD can display.
Recreate disc with good files
Clean disk or replace
Disc is dirty or scratched
File is damaged/bad recording
Check wiring and correct
Turn LOCAL function OFF
Connect the auto antenna control cable properly
Remove the obstacle and press OPEN again to resume
the monitor open/close sequence
Use only DVDs labeled “Region 1” or “All” only
Incorrect connection between ACC and
positive battery wire
Auto antenna is not fully extended
Local function is activated
Front panel obstructed
Region code error
Press eject or RESET
Check media for scratches
Physical defect in media
Focus error or disc is in upside down
Replace battery
Check mounting sleeve
Check media for scratche
Use discs labeled "Region 1" or "All" only
Physical defect in media
Wrong region
Dead battery
Unit is not mounted correctly
Check connections at reverse lamp
Select reverse gear
Set rear view to ON - see page 14 for details
Reverse circuit not connected
Vehicle is not in reverse
Rear view set to OFF
Check connections at parking brake Apply parking brake
Replace fuse
Fuse blown
Parking brake safety circuit not connected
Parking brake not applied
Check connection to ground
Black wire not connected
iPod source not available
iPOD
Incorrect playback
message is played
Interruption during playback
Unit resets itself
when engine is off
Weak station searching
Front panel wil
l not open/close
Region code
error appears on display
ERR-DISC appears
on display
Excessive skipping
IR remote does not work
DVD does not start play-back
No video display
(when in reverse)
Unit has audio
(but no video)
Unit blows fuse
Unit has power
(but no sound)
Unit will not turn on
(no power)
Yellow wire not connected or incorrect voltage.
Red wire not connected or incorrect voltage.
Check connections for proper voltage
(11~16VDC)
48
Remote control
does not function
Remote
Caller ID does not appear
during incoming call
Call is answered
automatically
Call is connected (but no
audio can be heard through
the speakers)
Echo or noise is heard
during a phone call
Ring tone cannot be heard
through the speakers
Mobile device will not
connect to the head unit
automatically
Close all windows and turn off any fans or A/C
Possible road noise or interior interference
Battery installed incorrectly
Battery depleted
Remove battery and install correctly
Replace battery with new one
Pull out the insulation tape
Some devices may not communicate or work
properly with this head unit
The calling mobile device is not set to send the
Caller ID or the service is not available
Battery is covered with insulation tape
Set Auto Answer function to OFF as described on page 39
Press Audio Transfer to allow audio from the
phoneto be heard through the speakers
Auto Answer function is set to ON
Audio is routed to the mobile device
Clear any obstacles in front of microphone opening
Press MUTE to cancel the mute function and resume audio
MUTE function is activated in the head unit
Microphone opening on the front panel is
obstructed
Increase the volume of the ring tones using the up and
down volume control during the ringing process
Set Connect Function to Auto as described on page 37
Ring tone volume is turned down
When the Connect function is set to Manual,
the head unit will not connect to any mobile
device automatically
IR Remote Preparation
To first use the IR Remote
Notes:
control, you must first pull
Remove the battery if the IR Remote will not
the battery insulation
be used for a month or longer
tape out.
Remove and dispose of battery properly
Battery:
Insert/Replacing the
holder
Remove the battery
the battery holder
Remove the battery from
Make sure the (+) side
Install the new battery
faces up
Insert the battery holder
Do not store battery
CAUTION!!!
materials.
with metallic objects or
49
Specifications
Caution
General
Package
Operation voltage range: 10.5V~ 16.0V. Max operation current:10A.
Qualified DVD AV System must be packed with general wet-proof inner package.
Current of standby:
Carton packing must be general wet-provable:
ACC OFF、 POWER OFF≤18 mA ACC ON、POWER OFF≤50 mA
Packing place should be clean, dry, and harmful medium-less.
Dimension of shell: 50 mm x178 mm x（165+25）mm
Installation angle: forth 0°~ +30°, left and right ±15°
Transportation
Car DVD AV Audio system packed in carton can be transported by all type of vehicle, but container and
High resolution 7”(16:9) wide screen colorful monitor,dot matrix small LCD is in use.
room of carrier should be clean and spot-less.
DVD Player
Mixture with harmful chemical and wet cargo is seriously forbidden.
Directly expose to rain and snow during transporting should be avoided.
Frequency response: 10Hz-20kHz
Channel separation @ 1kHz: >65dB
Notes:The set is a precision system, Random or unauthorized dismantling or readjusting is not allowed.
D/A converter: 24 Bit
Storage: high temperature, high wet and dust-full place should be avoided.
Handling: additional force to the DVD mechanism is not allowed when handling.
FM Tuner
Static-proof action should be taken when contact to the mechanism since LD and OEIC can be easily
Tuning range: 87.5MHz-107.9MHz
damaged by static.
Usable sensitivity: 8.5dBf
Hand touch Laser pickup is forbidden.
50dB quieting sensitivity: 10dBf
Must avoid laser beam shooting at eyes directly, since the.
Stereo separation @ 1kHz: 40dB
Frequency response: 30Hz-13kHz
AM Tuner
Tuning range: 530kHz-1720kHz
Usable sensitivity: 22uV
Frequency response: 30Hz-2.2kHz
Monitor
Panel size: 7” (177.8 mm) diagonal measurement
View angle (up/down/left/right): 30/60/60/60
Resolution: 480 W x 234 H
Brightness (cd/m2): 350
Contrast ratio: 300:1
Elements: 336,960
Environment
Operation temperature range: -20ºC~ +70ºC
Operation moisture range: 45%~80%RH
Storage temperature range: -30ºC~ +80ºC
Storage moisture range: 30%~90%RH
Pressure of atmosphere: 860mbar~1060mbar
50
51

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : 3.1-701
Creation Date--Text             : 
Producer                        : Corel PDF Engine Version 1.0.0.458
Mod Date--Text                  : 
Format                          : application/pdf
Creator                         : JUJUMAO
Title                           : SD-9614-SV.cdr
Creator Tool                    : CorelDRAW 版本 12.0
Modify Date                     : 2008:05:07 19:45:59+08:00
Metadata Date                   : 2008:05:07 19:45:59+08:00
Document ID                     : uuid:35609211-0e8c-4079-980b-cc8e512448a3
Instance ID                     : uuid:ddd2e9e0-2345-4525-8fa2-d75116e276a8
Has XFA                         : No
Page Count                      : 7
Create Date                     : D:20080124142128
Author                          : JUJUMAO

EXIF Metadata provided by EXIF.tools