SPECTRA Technologies SR300 Contactless Reader User Manual SR300 InstallationGuide Booklet CE FCC

SPECTRA Technologies Holdings Co. Ltd. Contactless Reader SR300 InstallationGuide Booklet CE FCC

User Manual

SR300CONTACTLESS CARD READERInstallation GuideVersion 1.0 SPECTRA TechnologiesISO9001 : 200820002812 QM08SPECTRA TechnologiesISO14001 : 200420002812 UM
SR3001Installation GuideSR300 Layout & Function Descriptions of SR30011.1 Main Unit & AccessoriesContactless Card ReaderDesktop Stand (Optional) All-in-one Connection CableScrews for Desktop Stand (Optional)Power Adaptor (Optional) - provides8.5V DC supply
21.2 Features at a GlanceSR300LCD DisplayCapacitive SensingButton Status DisplayingLED Card Reading Area Cable Cover - Unless repairing engineer, please do not open the cover and unplug the cable connector Warning ! Reset Button SAM Card Door Screw Holes forDesktop Stand Installation Guide
31.3 Types of All-in-one Connection Cable2 RS232 Communication PortPower Adaptor - provides8.5V DC supplySR300Installation Guide
41.4 Installation of SAM CardSR30012SAM Card - for version equipped with SAM card reader only Installation Guide
51.5 Assembling ofDesktop StandSR300132Install Desktop Stand by screwingthe screws provided Adjust the required angle Tight fastening the lateralscrews to fix the readerInstallation Guide
6How to Operate22.1 Turn On ProcedurePower is on whenever plugged.Transaction operation is ready.SR300Installation Guide
7Safety & Maintenance33.1 Basic Safety Practice3.2 Safety WarningWhile using SR300 and its accessories,please follow the safety instruction to avoidfire, electric shock and personal injury.Read this instruction in detailDisconnect the power and accessories beforecleaning, use dry flannelette and soft brushfor cleaningDo not place the unit near waterDo not spray any liquid onto the unitPut the unit on stable platform to avoiddamage by dropKeep the unit away from high temperature andpoor ventilation areaEnsure electricity supply is safe and stableTo avoid electric shock, do not disassemblethe unit by yourself. Send it to agency forrepairing if necessary Do not use SR300 and its accessories duringexplosive gas leakageFor the following cases, disconnect power,other accessories and send for repairing,~ Damage on power cable or plug~ Liquid get into pinpad~ Pinpad gets wet in raining~ Still abnormal function after following all the instruction mentioned ~ Pinpad broken~ Pinpad obvious abnormal Using the provided cable or power adaptor to power the reader SR300Installation Guide
83.3 Location for Installation3.4 Maintenance Should be safe and convenient for operators and users Should be placed on stable working platform or mounted on wall securely for power and accessories connection Good ventilation and should have 20cm space around the pinpad DO NOT expose PR608 in following environment ~ Near electrical appliance with high frequency EM wave such as air conditioner, electric fan, motor, neon sign etc.~ Liquid container such as water trough, sink, pond etc. ~ High temperature or humidity place~ High containing of VOC, salty and dusty area~ Sunlight or high thermal radiation area~ Near demagnetizing system and magnetic security systemSR300 has been designed to provide stableservice for users with less maintenance.In order to ensure best performance, wesuggested the followings. Avoid exposing in sunlight, high temperature, high humidity and dusty area Keep in dry, clean and tidy environment Do not keep in extreme hot and cold place Do not disassemble the AC/DC power adaptor Do not shake and thrash the pinpad heavilyCleaning of SR300 Use flannelette to remove dust on pinpad Use mild alcohol to remove stubborn stains If possible, use low pressure blower to blow out dust on keypad Use flannelette or lens cleaning paper to clean the displaySend for repairing If it is necessary to send back SR300 for repairing, please contact agency, pack the pinpad properly (use original packing material if possible) to avoid damage during transportation SR300Installation Guide
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.

Navigation menu