SPECTRA Technologies SR300 Contactless Reader User Manual SR300 InstallationGuide Booklet CE FCC
SPECTRA Technologies Holdings Co. Ltd. Contactless Reader SR300 InstallationGuide Booklet CE FCC
User Manual
SR300 CONTACTLESS CARD READER Installation Guide Version 1.0 SPECTRA Technologies ISO9001 : 2008 20002812 QM08 SPECTRA Technologies ISO14001 : 2004 20002812 UM SR300 SR300 Layout & Function Descriptions of SR300 1.1 Main Unit & Accessories Contactless Card Reader All-in-one Connection Cable Desktop Stand (Optional) Screws for Desktop Stand (Optional) Power Adaptor (Optional) - provides 8.5V DC supply Installation Guide SR300 1.2 Features at a Glance Status Displaying LED LCD Display Capacitive Sensing Button Card Reading Area Warning ! Reset Button Cable Cover - Unless repairing engineer, please do not open the cover and unplug the cable connector SAM Card Door Screw Holes for Desktop Stand Installation Guide SR300 1.3 Types of All-in-one Connection Cable Power Adaptor - provides 8.5V DC supply RS232 Communication Port Installation Guide SR300 1.4 Installation of SAM Card SAM Card - for version equipped with SAM card reader only Installation Guide SR300 1.5 Assembling of Desktop Stand Install Desktop Stand by screwing the screws provided 2 Adjust the required angle 3 Tight fastening the lateral screws to fix the reader Installation Guide SR300 How to Operate 2.1 Turn On Procedure Power is on whenever plugged. Transaction operation is ready. Installation Guide SR300 Safety & Maintenance 3.1 Basic Safety Practice While using SR300 and its accessories, please follow the safety instruction to avoid fire, electric shock and personal injury. Read this instruction in detail Disconnect the power and accessories before cleaning, use dry flannelette and soft brush for cleaning Do not place the unit near water Do not spray any liquid onto the unit Put the unit on stable platform to avoid damage by drop Keep the unit away from high temperature and poor ventilation area Ensure electricity supply is safe and stable To avoid electric shock, do not disassemble the unit by yourself. Send it to agency for repairing if necessary Do not use SR300 and its accessories during explosive gas leakage For the following cases, disconnect power, other accessories and send for repairing, ~ Damage on power cable or plug ~ Liquid get into pinpad ~ Pinpad gets wet in raining ~ Still abnormal function after following all the instruction mentioned ~ Pinpad broken ~ Pinpad obvious abnormal 3.2 Safety Warning Using the provided cable or power adaptor to power the reader Installation Guide SR300 3.3 Location for Installation Should be safe and convenient for operators and users Should be placed on stable working platform or mounted on wall securely for power and accessories connection Good ventilation and should have 20cm space around the pinpad DO NOT expose PR608 in following environment ~ Near electrical appliance with high frequency EM wave such as air conditioner, electric fan, motor, neon sign etc. ~ Liquid container such as water trough, sink, pond etc. ~ High temperature or humidity place ~ High containing of VOC, salty and dusty area ~ Sunlight or high thermal radiation area ~ Near demagnetizing system and magnetic security system 3.4 Maintenance SR300 has been designed to provide stable service for users with less maintenance. In order to ensure best performance, we suggested the followings. Avoid exposing in sunlight, high temperature, high humidity and dusty area Keep in dry, clean and tidy environment Do not keep in extreme hot and cold place Do not disassemble the AC/DC power adaptor Do not shake and thrash the pinpad heavily Cleaning of SR300 Use flannelette to remove dust on pinpad Use mild alcohol to remove stubborn stains If possible, use low pressure blower to blow out dust on keypad Use flannelette or lens cleaning paper to clean the display Send for repairing If it is necessary to send back SR300 for repairing, please contact agency, pack the pinpad properly (use original packing material if possible) to avoid damage during transportation Installation Guide FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Modify Date : 2013:06:15 14:23:01+08:00 Create Date : 2013:06:15 14:23:01+08:00 Metadata Date : 2013:06:15 14:23:01+08:00 Creator Tool : Adobe Acrobat 8.0 Combine Files Format : application/pdf Title : SR300_InstallationGuide_Booklet_CE_FCC.cdr Creator : Samson Wong Document ID : uuid:901cda2a-b068-42d3-8735-d5d094df503b Instance ID : uuid:4c14eaf6-bbb1-484a-a7ea-cf78ab1690c6 Producer : Adobe Acrobat 8.0 Has XFA : No Page Count : 10 Author : Samson WongEXIF Metadata provided by EXIF.tools