SPRINGCARDS PRNU11 RFID USB Smartcard Reader User Manual ESL84UP AD

Pro Active SAS RFID USB Smartcard Reader ESL84UP AD

Users Manual

ESL84UP-AD 20/03/2009 Headquarters, Europa SpringCard 13 voie la Cardon Parc Gutenberg 91120 Palaiseau FRANCE Phone : +33 (0) 164 53 20 10 Fax : +33 (0) 164 53 20 18 Americas SpringCard 964 Fifth Avenue Suite 235 San Diego, CA 92101 USA Phone : +1 (619) 544 1450 Fax : +1 (619) 573 6867 www.springcard.com SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS. All other brand names, product names, or trademarks belong to their respective holders. Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden. PROXN ‘ROLL USER MANUAL
ESL84UP-AB 2 / 10 SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS. All other brand names, product names, or trademarks belong to their respective holders. Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden. DOCUMENT INFORMATION Category : Studies & concept Group : product Reference : ESL84UP Version : AA Status : document1 saved 20/03/09 - printed 20/03/09 REVISION HISTORY Valid. by Ver. Date Author Tech. Qual. Approv. by Remarks : AA 17/12/08 JCH XXX XXX XXX First release AB 30/01/09 JCH Technical specification : Add Device is powered by a limited power source AC 05/03/09 JCH Adding FCC informations AD 20/03/09 JCH Operational description upgraded
ESL84UP-AB 3 / 10 SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS. All other brand names, product names, or trademarks belong to their respective holders. Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden. TABLE OF CONTENT 1. PRODUCT DESCRIPTION........................ 4 1.1. OPERATIONAL DESCRIPTION......................... 4 1.2. TECHNICAL DESCRIPTION............................ 4 1.3. CAUTION TO USERS................................... 5 1.4. CONVENTIONNAL OPERATION........................ 6 1.5. INSTRUCTION FOR TEST SETUP..................... 7 1.6. DOCUMENT LIST...................................... 8
ESL84UP-AB 4 / 10 SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS. All other brand names, product names, or trademarks belong to their respective holders. Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden. 1. PRODUCT DESCRIPTION 1.1. OPERATIONAL DESCRIPTION Prox’N’Roll is a versatile 13.56 MHz contactless USB smartcard reader and encoder for PC/Laptop. It reads and writes all ISO 14443 compliant contactless smartcards within a distance from 0 to 5 cm. It supports USB full speed (12Mbps) and fastest smartcard baud rate (up to 848kbps). Prox’N’Roll is directly powered by the PC/Laptop through its USB connection. ProxN’Roll can be used with legacy (Prox’N’Roll isdetected as a serial communication port) or PC/SC driver (Prox’N’Roll is detected as a USB smartcard reader). Prox’n’Roll generates a RF field permanently and uses inductive coupling (magnetic field) to power the smartcards and communicate with them using AM modulation. The ID tag answer is demodulated and decoded by the Prox’N’Roll and sent to the PC/Laptop. Prox’N’Roll has three different LED lightning circuits (blue, green, red) integrated. These LEDs are used as status indicators : Blue Led : Prox’N’Roll is fully operational, connected and recognized by laptop Green Led : the TAG had been read successfully Red Led : an error occurred during reading or writing operation of the tag There is also a buzzer indicating the presence of a Tag the RF field. 1.2. TECHNICAL DESCRIPTION Name : ProxNRoll Part Number : PRNU11 Power supply : USB Bus powered : 5V +/-10% Device is powered by a limited power source In accordance with EN 60950-1:2006. Current consumtion : typ : 200mA - Max :250mA Operating temperature : -20 / +70°C Storage temperature: -40 / +85°C Weight: 150gr Length USB cable: 1.80m Overload protection: Polyswitch 500mA, Transil 5V on USB power line ESD protection: On USB power line and data line 15kV ( air discharge) 8kV (contact discharge) Mechanical UL-HB class RoHS compliance
ESL84UP-AB 5 / 10 SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS. All other brand names, product names, or trademarks belong to their respective holders. Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden. Intentionnal Radiator informations Frequency range : 13.56Mhz – AM modulation 106 – 848kbps Antenna : integrated Local oscillator: 13.56Mhz – 24Mhz . Regulatory FCC Part 15 class B FCC ID: TYQPRNU11 1.3. CAUTION TO USERS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference (2)This device must accept any interference received, including interference that may cause undesired operation Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment FCC Compliance Statement according to Section 15.105 (b): Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help.
ESL84UP-AB 6 / 10 SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS. All other brand names, product names, or trademarks belong to their respective holders. Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden. 1.4. CONVENTIONNAL OPERATION 1.4.1. Arrangement Diagram ProxN’RollPC or Laptopwith USB port
ESL84UP-AB 7 / 10 SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS. All other brand names, product names, or trademarks belong to their respective holders. Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden. 1.5. INSTRUCTION FOR TEST SETUP - Install CSB6 Familly legacy driver SDD470-BA.EXE - Connect the reader to PC or Laptop - In panel configuration Check for the Com Number used ( Comx). - Launch HyperTerminal with settings ( 38400, 8, N, 1 without flow control) - Put contactless Smartcard on the reader - Type “tag” command - Check contactless smartcard serial number response. Example: contactless Smartcard found: > tag 2375656 0004 28 OK Example : cantactless Smartcard not found > tag err -1 In this way, after typing “tag” command the RF field is active all the time. Close hyperterminal before unplug the reader from USB port. There is no safety restriction for hot unplug the reader from USB port.
ESL84UP-AB 8 / 10 SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS. All other brand names, product names, or trademarks belong to their respective holders. Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden. 1.6. DOCUMENT LIST Reference Version type PFL8P7P AC PDF datasheet EAS887P AB PDF schematic EAN81CP AC PDF ProxNRoll RC632 based – Components list EAN8I7P AA PDF ProxNRoll Blue mechanical list EAN85LP AA PDF ProxNRoll usb cable list PCB-EAS887P AB ZIP PCB layout EAS887P AB FRP Components layouts ( netlist) ESI895P AB PDF Top component placement ESI896P AB PDF Bottom component placement EPC8J0P AB PDF Usb cable placement ESI85KP AB PDF ProxNRoll USB cable specification EST85PP AA PDF Technical specification PCB ESL85RP AA PDF Technical specification mechanical housing PNA85MP AA PDF RoHS Compliance certificate SDD470 AE EXE CSB6 Familly legacy driver
ESL84UP-AB 9 / 10 SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS. All other brand names, product names, or trademarks belong to their respective holders. Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden.
ESL84UP-AB 10 / 10 SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS. All other brand names, product names, or trademarks belong to their respective holders. Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden. DISCLAIMER This document is provided for informational purposes only and shall not be construed as a commercial offer, a license, an advisory, fiduciary or professional relationship between PRO ACTIVE and you. No information provided in this document shall be considered a substitute for your independent investigation. The information provided in document may be related to products or services that are not available in your country. This document is provided "as is" and without warranty of any kind to the extent allowed by the applicable law. While PRO ACTIVE will use reasonable efforts to provide reliable information, we don't warrant that this document is free of inaccuracies, errors and/or omissions, or that its content is appropriate for your particular use or up to date. PRO ACTIVE reserves the right to change the information at any time without notice. PRO ACTIVE does not warrant any results derived from the use of the products described in this document. PRO ACTIVE will not be liable for any indirect, consequential or incidental damages, including but not limited to lost profits or revenues, business interruption, loss of data arising out of or in connection with the use, inability to use or reliance on any product (either hardware or software) described in this document. These products are not designed for use in life support appliances, devices, or systems where malfunction of these product may result in personal injury. PRO ACTIVE customers using or selling these products for use in such applications do so on their own risk and agree to fully indemnify PRO ACTIVE for any damages resulting from such improper use or sale. COPYRIGHT NOTICE All information in this document is either public information or is the intellectual property of PRO ACTIVE and/or its suppliers or partners. You are free to view and print this document for your own use only. Those rights granted to you constitute a license and not a transfer of title : you may not remove this copyright notice nor the proprietary notices contained in this documents, and you are not allowed to publish or reproduce this document, either on the web or by any mean, without written permission of PRO ACTIVE. Copyright © PRO ACTIVE SAS 0000, all rights reserved. EDITOR’S INFORMATION PRO ACTIVE SAS company with a capital of 227 000 € RCS EVRY B 429 665 482 Parc Gutenberg, 13 voie La Cardon 91120 Palaiseau – France

Navigation menu