SPRINGCARDS PRNU11 RFID USB Smartcard Reader User Manual ESL84UP AD

Pro Active SAS RFID USB Smartcard Reader ESL84UP AD

Users Manual

Download: SPRINGCARDS PRNU11 RFID USB Smartcard Reader User Manual ESL84UP AD
Mirror Download [FCC.gov]SPRINGCARDS PRNU11 RFID USB Smartcard Reader User Manual ESL84UP AD
Document ID1084475
Application ID2N9Mk4s1eaMU/wOopC+Dbg==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize33.31kB (416356 bits)
Date Submitted2009-03-24 00:00:00
Date Available2009-03-24 00:00:00
Creation Date2009-03-20 11:19:31
Producing SoftwareGPL Ghostscript 8.54
Document Lastmod2009-03-20 11:19:31
Document TitleESL84UP-AD
Document CreatorPDFCreator Version 0.9.3
Document Author: jerome

ESL84UP-AD
20/03/2009
PROXN ‘ROLL USER MANUAL
Headquarters, Europa
Americas
SpringCard
13 voie la Cardon
Parc Gutenberg
91120 Palaiseau
FRANCE
SpringCard
964 Fifth Avenue
Suite 235
San Diego, CA 92101
USA
Phone :
Fax :
Phone :
Fax :
+33 (0) 164 53 20 10
+33 (0) 164 53 20 18
+1 (619) 544 1450
+1 (619) 573 6867
www.springcard.com
SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS.
All other brand names, product names, or trademarks belong to their respective holders.
Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden.
ESL84UP-AB
2 / 10
DOCUMENT INFORMATION
Category :
Group :
Reference :
Version :
Status :
Studies & concept
product
ESL84UP
AA
document1
saved 20/03/09 - printed 20/03/09
REVISION HISTORY
Ver.
AA
AB
AC
AD
Date
Author
17/12/08
30/01/09
05/03/09
20/03/09
JCH
JCH
JCH
JCH
Valid. by
Tech.
Qual.
XXX
XXX
Approv.
by
XXX
Remarks :
First release
Technical specification : Add Device is powered by a limited power source
Adding FCC informations
Operational description upgraded
SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS.
All other brand names, product names, or trademarks belong to their respective holders.
Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden.
ESL84UP-AB
3 / 10
TABLE OF CONTENT
1.
PRODUCT DESCRIPTION........................ 4
1.1.
1.2.
1.3.
1.4.
1.5.
1.6.
OPERATIONAL DESCRIPTION .........................
TECHNICAL DESCRIPTION ............................
CAUTION TO USERS ...................................
CONVENTIONNAL OPERATION ........................
INSTRUCTION FOR TEST SETUP .....................
DOCUMENT LIST ......................................
SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS.
All other brand names, product names, or trademarks belong to their respective holders.
Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden.
ESL84UP-AB
4 / 10
1.
PRODUCT DESCRIPTION
1.1. OPERATIONAL DESCRIPTION
Prox’N’Roll is a versatile 13.56 MHz contactless USB smartcard reader and encoder for PC/Laptop.
It reads and writes all ISO 14443 compliant contactless smartcards within a distance from 0 to 5 cm.
It supports USB full speed (12Mbps) and fastest smartcard baud rate (up
to 848kbps). Prox’N’Roll is directly powered by the PC/Laptop through its USB connection.
ProxN’Roll can be used with legacy (Prox’N’Roll isdetected as a serial communication port) or PC/SC
driver (Prox’N’Roll is detected as a USB smartcard reader).
Prox’n’Roll generates a RF field permanently and uses inductive coupling (magnetic field) to power
the smartcards and communicate with them using AM modulation. The ID tag answer is demodulated
and decoded by the Prox’N’Roll and sent to the PC/Laptop.
Prox’N’Roll has three different LED lightning circuits (blue, green, red) integrated. These LEDs are
used as status indicators :
Blue Led : Prox’N’Roll is fully operational, connected and recognized by laptop
Green Led : the TAG had been read successfully
Red Led : an error occurred during reading or writing operation of the tag
There is also a buzzer indicating the presence of a Tag the RF field.
1.2. TECHNICAL DESCRIPTION
Name :
ProxNRoll
Part Number :
PRNU11
Power supply :
USB Bus powered : 5V +/-10%
Device is powered by a limited power source
In accordance with EN 60950-1:2006.
Current consumtion :
typ : 200mA - Max :250mA
Operating temperature :
-20 / +70°C
Storage temperature:
-40 / +85°C
Weight:
150gr
Length USB cable:
1.80m
Overload protection:
Polyswitch 500mA, Transil 5V on USB power line
ESD protection:
On USB power line and data line
15kV ( air discharge)
8kV (contact discharge)
Mechanical
UL-HB class
RoHS compliance
SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS.
All other brand names, product names, or trademarks belong to their respective holders.
Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden.
ESL84UP-AB
5 / 10
Intentionnal Radiator informations
Frequency range : 13.56Mhz – AM modulation 106 – 848kbps
Antenna : integrated
Local oscillator: 13.56Mhz – 24Mhz .
Regulatory
FCC Part 15 class B
FCC ID: TYQPRNU11
1.3. CAUTION TO USERS
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference
(2)This device must accept any interference received, including interference that may cause undesired operation
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment
FCC Compliance Statement according to Section 15.105 (b):
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS.
All other brand names, product names, or trademarks belong to their respective holders.
Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden.
ESL84UP-AB
6 / 10
1.4. CONVENTIONNAL OPERATION
1.4.1.
Arrangement Diagram
PC or Laptop
with USB port
ProxN’Roll
SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS.
All other brand names, product names, or trademarks belong to their respective holders.
Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden.
ESL84UP-AB
7 / 10
1.5. INSTRUCTION FOR TEST SETUP
Install CSB6 Familly legacy driver SDD470-BA.EXE
Connect the reader to PC or Laptop
In panel configuration Check for the Com Number used ( Comx).
Launch HyperTerminal with settings ( 38400, 8, N, 1 without flow control)
Put contactless Smartcard on the reader
Type “tag” command
Check contactless smartcard serial number response.
Example: contactless Smartcard found:
> tag
2375656 0004 28
OK
Example : cantactless Smartcard not found
> tag
err -1
In this way, after typing “tag” command the RF field is active all the time.
Close hyperterminal before unplug the reader from USB port.
There is no safety restriction for hot unplug the reader from USB port.
SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS.
All other brand names, product names, or trademarks belong to their respective holders.
Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden.
ESL84UP-AB
8 / 10
1.6. DOCUMENT LIST
Reference
Version
type
PFL8P7P
AC
PDF
datasheet
EAS887P
AB
PDF
schematic
EAN81CP
AC
PDF
ProxNRoll RC632 based – Components list
EAN8I7P
AA
PDF
ProxNRoll Blue mechanical list
EAN85LP
AA
PDF
ProxNRoll usb cable list
PCB-EAS887P
AB
ZIP
PCB layout
EAS887P
AB
FRP
Components layouts ( netlist)
ESI895P
AB
PDF
Top component placement
ESI896P
AB
PDF
Bottom component placement
EPC8J0P
AB
PDF
Usb cable placement
ESI85KP
AB
PDF
ProxNRoll USB cable specification
EST85PP
AA
PDF
Technical specification PCB
ESL85RP
AA
PDF
Technical specification mechanical housing
PNA85MP
AA
PDF
RoHS Compliance certificate
SDD470
AE
EXE
CSB6 Familly legacy driver
SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS.
All other brand names, product names, or trademarks belong to their respective holders.
Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden.
ESL84UP-AB
9 / 10
SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS.
All other brand names, product names, or trademarks belong to their respective holders.
Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden.
ESL84UP-AB
10 / 10
DISCLAIMER
This document is provided for informational purposes only and shall not be construed as a commercial offer, a
license, an advisory, fiduciary or professional relationship between PRO ACTIVE and you. No information provided
in this document shall be considered a substitute for your independent investigation.
The information provided in document may be related to products or services that are not available in your
country.
This document is provided "as is" and without warranty of any kind to the extent allowed by the applicable law.
While PRO ACTIVE will use reasonable efforts to provide reliable information, we don't warrant that this document
is free of inaccuracies, errors and/or omissions, or that its content is appropriate for your particular use or up to
date. PRO ACTIVE reserves the right to change the information at any time without notice.
PRO ACTIVE does not warrant any results derived from the use of the products described in this document. PRO
ACTIVE will not be liable for any indirect, consequential or incidental damages, including but not limited to lost
profits or revenues, business interruption, loss of data arising out of or in connection with the use, inability to use
or reliance on any product (either hardware or software) described in this document.
These products are not designed for use in life support appliances, devices, or systems where malfunction of these
product may result in personal injury. PRO ACTIVE customers using or selling these products for use in such
applications do so on their own risk and agree to fully indemnify PRO ACTIVE for any damages resulting from such
improper use or sale.
COPYRIGHT NOTICE
All information in this document is either public information or is the intellectual property of PRO ACTIVE and/or its
suppliers or partners.
You are free to view and print this document for your own use only. Those rights granted to you constitute a
license and not a transfer of title : you may not remove this copyright notice nor the proprietary notices contained
in this documents, and you are not allowed to publish or reproduce this document, either on the web or by any
mean, without written permission of PRO ACTIVE.
Copyright © PRO ACTIVE SAS 0000, all rights reserved.
EDITOR’S INFORMATION
PRO ACTIVE SAS company with a capital of 227 000 €
RCS EVRY B 429 665 482
Parc Gutenberg, 13 voie La Cardon
91120 Palaiseau – France
SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS.
All other brand names, product names, or trademarks belong to their respective holders.
Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 10
Producer                        : GPL Ghostscript 8.54
Create Date                     : 2009:03:20 11:19:31+01:00
Modify Date                     : 2009:03:20 11:19:31
Title                           : ESL84UP-AD
Creator                         : PDFCreator Version 0.9.3
Author                          : jerome
Subject                         : 
EXIF Metadata provided by EXIF.tools
FCC ID Filing: TYQPRNU11

Navigation menu