ST Engineering Telematics Wireless TX5003 Remote Control Unit, Model Tx-5003 User Manual 5 pages

Telematics Wireless Ltd. Remote Control Unit, Model Tx-5003 5 pages

5 pages

Download: ST Engineering Telematics Wireless TX5003 Remote Control Unit, Model Tx-5003 User Manual 5 pages
Mirror Download [FCC.gov]ST Engineering Telematics Wireless TX5003 Remote Control Unit, Model Tx-5003 User Manual 5 pages
Document ID123343
Application ID4MUQHZ9O0akxyZl7arZFPQ==
Document Description5 pages
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatMicrosoft Word - pdf
Filesize5.73kB (71681 bits)
Date Submitted2000-10-31 00:00:00
Date Available2000-12-12 00:00:00
Creation Date2000-10-31 09:48:08
Producing SoftwareAcrobat Distiller 4.0 for Windows
Document Lastmod2000-10-31 09:48:10
Document Title5 pages

Tadiran Telematics proprietary
TX - 5003
RCU - Remote Control Unit
OPERATING INSTRUCTIONS
DRAFT
TX5003
FCC ID: NTATX5003
Manufacturer: Tadiran Telematics Ltd.
This device complies with Part 15 of FCC Rules.
Operation is subjected to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received,
including Interference that may cause undesired operation.
August 2000
Tadiran Telematics Ltd., 26 Hashoftim St., P.O.B. 267, Holon 58102, Israel
Tel.: (972-3) 557-5750 Fax.: (972-3) 557-5753
D:\Ready_To_Convert\Doc\123343.DOC
t
Tadiran Telematics proprietary
Table of Contents
Page
1.
Description
2.
Controls
3.
Indicator
4.
Arming the system
5.
Disarming the system
6.
Battery replacement
Tadiran Telematics Ltd., 26 Hashoftim St., P.O.B. 267, Holon 58102, Israel
Tel.: (972-3) 557-5750 Fax.: (972-3) 557-5753
D:\Ready_To_Convert\Doc\123343.DOC
t
Tadiran Telematics proprietary
1.
Description
TX - 5003 is a transmitter for short - range wireless data application.
It is used to transfer the operator (driver) commands to the alarm unit installed in the
car.
LED
BUTTONS
2.
Controls
One button with a “LOCK” icon
Four numeric buttons “1”,”2”,”3”,”4”
3.
Indicator
One RED LED indicator
4.
Arming the System
Press the “LOCK” button
The “RED LED” on the RCU will blink to indicate transmission
The alarm system will respond with two beeps of the siren, and by flashing the car
lights twice.
Tadiran Telematics Ltd., 26 Hashoftim St., P.O.B. 267, Holon 58102, Israel
Tel.: (972-3) 557-5750 Fax.: (972-3) 557-5753
D:\Ready_To_Convert\Doc\123343.DOC
t
Tadiran Telematics proprietary
5.
Disarming the System
Press the “LOCK” button followed by your “PESONAL DISARM CODE”
The “RED LED” on the RCU will blink to indicate transmission
The alarm system will respond with one beep of the siren, and by flashing the car
lights.
In case of a mistake start the procedure again by pressing the “LOCK” button.
6.
Battery Replacement
For the replacement of the battery, proceed as follows:
Open the RCU by inserting a coin to the slot at the bottom left side of
the RCU
Remove the rear cover
Remove the old battery by pushing it out
Insert a new battery with the (-) sign facing the board and the (+) sign
pointing towards the spring.
Make sure to use the right battery type
3v 190Mah Lithium Battery CR-2032
Tadiran Telematics Ltd., 26 Hashoftim St., P.O.B. 267, Holon 58102, Israel
Tel.: (972-3) 557-5750 Fax.: (972-3) 557-5753
D:\Ready_To_Convert\Doc\123343.DOC

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2000:10:31 09:48:08
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2000:10:31 09:48:10-05:00
Page Count                      : 4
EXIF Metadata provided by EXIF.tools
FCC ID Filing: NTATX5003

Navigation menu