SUNLUX IOT TECHNOLOGY XL9530 Barcode Scanner User Manual
SUNLUX IOT TECHNOLOGY(GUANGDONG) INC. Barcode Scanner
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3434672 |
| Application ID | uJy7PP+P4+FIj2jj8XizCg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 68.94kB (861789 bits) |
| Date Submitted | 2017-06-22 00:00:00 |
| Date Available | 2017-06-22 00:00:00 |
| Creation Date | 2017-04-28 10:25:25 |
| Producing Software | Corel PDF Engine Version 18.1.0.661 |
| Document Lastmod | 2017-04-28 10:25:25 |
| Document Title | Wireless Barcode Scanner User's Manual - 2017-03-08.cdr |
| Document Creator | CorelDRAW X8 |
| Document Author: | Administrator |
CAUTION The user is cautioned that changes or modiďŹcations not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Installation Installation procedure: 1. Make sure that the scanner has the correct table for your system. 2. Turn off the power of the system (or PC). 3. Connect the Rj45 port of the cable to the tail of the receiver. 4. Connect the R232/USB/PS2 port of the cable to the tail of the system (or PC). 5. Turn on the power of the system (or PC). 6. Make sure the host device have communication before transmitting data. Introduction The scanner read the 1D/2D barcode by capturing its image. it provides users with three scan modes, including Manual Mode, Sense Mode and Continuous Mode, tailored to different scanning needs. And the scanner decoded data transmitted to the receiver by wireless communication. The receiver transmit the data to the system(or PC) through the cable (RS232/USB /Ps2). The device wireless inductive charge without cable, just place the scanner on the receiver, it can charge. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and Part three: RFID Module receiver. -Connect the equipment into an outlet on a circuit The ID card close to the the top of the scanner, the RFID reading module that in the scanner can read the ID card, and transfer the data to the receiver in 433MHz, and the receiver transfer data to the system (or PC) with RS232/USB/KB cable. different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Trigger Mode: A trigger pull activates a decode session. The decode session continues until the barcode is decoded or you release the trigger or decode session timeout expires. Sense Mode: The scanner waits for the image stabilization timeout to expire before activating a decode session every time it detects a change in ambient illumination. Decode session continues until the barcode is decoded or the decode session timeout expires. Continuous Mode: If the Continuous mode is enabled, the scanner automatically starts one decode session after another. To suspend/resume barcode reading, simply press the trigger.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Page Count : 2 Create Date : 2017:04:28 10:25:25+08:00 Modify Date : 2017:04:28 10:25:25+08:00 Producer : Corel PDF Engine Version 18.1.0.661 Author : Administrator Creator : CorelDRAW X8 Title : Wireless Barcode Scanner User's Manual - 2017-03-08.cdrEXIF Metadata provided by EXIF.tools