SYMA MODEL AIRCRAFT GC88752-11 WiFi Camera-2 User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	3328694
Application ID	+Yhv+N7Y0F7clB8EKTfbiQ==
Document Description	User manual 1.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	299.01kB (3737614 bits)
Date Submitted	2017-03-23 00:00:00
Date Available	2017-03-23 00:00:00
Creation Date	2017-01-19 15:23:20
Producing Software	Adobe Acrobat 7.0 Image Conversion Plug-in
Document Lastmod	2017-03-23 14:08:15
Document Title	User manual 1.pdf
Document Creator	Adobe Acrobat 7.0

Xflfi'llfl/J/IIIIMIIJII/IJ 1
85‘0- iii/é
A-CHANNEL PRESSURE FIXED POSITION HOVERING
REMOTE CONTROL DRONE
USER MANUAL
MAIN FEATURES
0 Utilizes the 4-axis structure. enabling the drone to be even more
flexible.speedy,and possessing a relatively stronger wind-withstanding
capability.lt can fly both in large indoor spaces and outdoors.
o Built-in G-axis gyro stabilizer to ensure accurate positioning in-flight.
o The structure uses a modular design which makes it easy to install and
repair.
0 Headless function making it easy for directional control.
0 Pressure-fixed-position hovering function for Auto Hover Mode.
0 360° stunt flip.
0 High quality aerial function for getting the fun of different photography.
Safety Guide
. Please store the smaller-sized drone accessories in places that are out
of reach of children.
. This drone is very powerful. For all first-time flights, the left joystick
must be slowly pushed up in order to prevent the drone from ascending
too fast to avoid unnecessary collision and possible damage or injury.
. When the flight is ended. first turn off the power of the remote control.
Then turn off the power of the drone.
. Avoid placing the batteries in places with high temperatures and
exposure to heat.
. Take extra precaution to ensure that the drone is at a minimum distance
of 15 feet from the pilot, other people, and animals in order to prevent
bodily injury during flight operation.A minimum separation distance of 20
cm must be maintained between the user's body and the device under
normal use condition.
. This drone is for people ages 14+. It must be flown always within the
line of sight of the pilot (or instructor) and flown safely.
. Non-rechargeable batteries are not to be rechargedzBatteries are to be
inserted with the correct polarity1Different types of batteries or new and
used batteries are not to be mixed.
8. When the drone is not in use. please remove the batteries in the remote
control.
9. The supply terminals are not to be short- circuited.
10. Attention: Drone assembly under adult supervision.
11.The pilot Is responsible for the safe operation and safe distance from
uninvolved persons and property on the ground and from other airspace
users and shall never fly the drone above crowds (> 12 persons).
12.Discharge the battery to 4o%-50% (On a full charge, fly for half of the
total flight time) if it will not be used for 10 days or more, this can
greatly extend the battery life.
Repair and maintenance
1. Use dry and soft cloth to clean this product.
2. Avoid exposing this product to heat.
3. Do not immerse this product in water. otherwise. the electronic parts will
be damaged.
4.Transformers used with the toy are to be regularly examined for damage to
the cord,p|ug,enclosure and other parts,and that,in the event of such
damagethe toys must be used with this transformer until the damage has
been repaired.
Package Description
The following items can be found in this product package:
- Drone - Card Reader - Camera
- Remote Control - Main Blades (Contain Memory Card)
- Instruction Manual - Charger - Wrench
- Screwdriver - Protective Gear
Installation/Removal Procedures
For Protective Gear
Protective Gear Installation:
1. Push the protective gear into the
connector on the main body as
shown.
Protective Gear Removal:
1. Pull up the protective gear according
to the figure and at the same time pull
the protective gear outwards as
shown.
Blade Installation/Removal
Blade installation:
. Blade is inserted as shown.
. Use a wrench to fasten the hexagonal
nut under the base of the main axis,
then press blade A onto the axis. Turn
the blade counterclockwise to lock it in.
Blade B is locked in by turning it
clockwise.
. Attach blade cover as shown.
. Remove the blade cover as shown.
. Use a wrench to fasten the hexagonal
nut under the base of the main axis, then
press blade A onto the axis. Turn the
blade clockwise to loosen it. Blade B is
loosened by turning it counter-clockwise.
. Remove the blade.
NOT Make sure to match the m ' on the blade
th the body base mark
Installation/Disassembly Steps
For High—Definiti
on Camera
Installation steps for camera
Dismantling steps
l3:
~ 3)
1. Aim the camera at the interface and push
it as left image.
2. Connect the camera cable into the socket
as left image.
for camera
1. Pull out the camera cable from the socket
as left image.
2. Press the camera locked button and pull
camera out at the same time.
Note After swttching on the power of the drone, do not Insen or
pull out th
e plug that connects to the drone on the
high-definition camera
Battery Changing And
Charging Methods For Drone
1.Press the power button on the top of
the drone to make sure the drone is
turned “OFF".
2.F‘ress and hold the fastening component
underneath the battery and pull the
battery out at the same time.
. Connect the plug from the charger into
the port in the battery, then connect the
charger into the charging cradle. The
indicator light will turn on while charging
and turn off when charging is complete.
It takes 150 minutes to completely
charge the battery.
. After the battery is fully charged. put the
the battery back into the drone.
The charging time IS about 150 minutes, Hover flight time
is approximately 9 minutes
Precautions as follows during charging of batten/z
- Avoid placing the active batteries in places with direct exposure,
sunlight and high temperatures. For example. naked light or electrical
equipment installations: otherwise it may cause damages or explosions.
- Avoid immersing the batteries in the water. The batteries shall be
stored in a cool and dry place.
- Avoid dismantling the batteries.
- During the charging of battery, avoid leaving the charging place.
- Rechargeable batteries are to be removed from the toy before being
charged;
- Rechargeable batteries are only to be charged under adult supervision;
- Exhausted batteries are to be removed from the toy;
- Caution: Risk of explosion if battery replaced by an incorrect type.dispose
of used batteries according to the instructions.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2017:01:19 15:23:20+08:00
Creator                         : Adobe Acrobat 7.0
Modify Date                     : 2017:03:23 14:08:15+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2017:03:23 14:08:15+08:00
Creator Tool                    : Adobe Acrobat 7.0
Format                          : application/pdf
Document ID                     : uuid:39f3aa82-1b6d-4b80-ac24-565fde2bfdbf
Instance ID                     : uuid:f221f7dd-43db-45e0-af59-69eb81a17356
Producer                        : Adobe Acrobat 7.0 Image Conversion Plug-in
Page Count                      : 6

EXIF Metadata provided by EXIF.tools