SYMA MODEL AIRCRAFT GC88752-11 WiFi Camera-2 User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	3328695
Application ID	+Yhv+N7Y0F7clB8EKTfbiQ==
Document Description	User manual 2.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	229.06kB (2863278 bits)
Date Submitted	2017-03-23 00:00:00
Date Available	2017-03-23 00:00:00
Creation Date	2017-01-19 15:23:20
Producing Software	Adobe Acrobat 7.0 Image Conversion Plug-in
Document Lastmod	2017-03-23 14:11:06
Document Title	User manual 2.pdf
Document Creator	Adobe Acrobat 7.0

Understanding Your Remote Control
Remote controls button function description:
Power ON/OFF ~-
Rightjoystlck — Push In
, over 3 seconds to enter
Lemoystick » Keep .— ' , headless mode then push
pushing In for ‘ ' ' ‘ In again to exit, Quickly
tnmmmg. To clear , ‘ - l push In and release to
a" the trimming , _ change high I low speed‘
settings, keep (one beep means low
pushing In and speed and two beeps
push the power ‘ means high speed.)
button at the same
time
0 360° Stunt flip button
‘ 0 Push for auto take-off
and landing.
Battery installation for remote control:
Battery cover
4 X AA Alkallne Batteries
1. Battery Installation Method: Open up the battery cover at the back of the
remote control. Correctly place 4 x AA alkaline batteries in the battery
box in strict adherence to the polarity instructions (the AA alkaline
batteries are not included).
During the battery installation, it must be ensured
that the polarities of the batteries are matched With
that of the battery box No battery shall be installed
With the opposite polarity
Do not use new and old batteries together
Do not use different types of batteries together
Do not use rechargeable batteries
Product features
1. Low-voltage Protection:
When the four indicator lights at the bottom
of the drone start flashing, it means that the
drone's battery power is low. At this time, the
drone will initiate the height-limiting function
and will descend to a safe altitude.
2. Over-current Protection:
If the drone encounters a direct impact from
a foreign objector is obstructed, or if the
blades are not rotating, the drone will go into
over-current protection mode.
3. Level Calibration Function:
Place the drone on a level surface and at
the same time, push both left and right
joysticks to the lower right corners for 2 to
3 seconds; the led light indicator on the
drone will blink rapidly, and it will return back
to the normal status after about 2 to 3 seconds.
The level calibration is successful.
4. Fast/Slow Speed Function:
Slow speed by default when first powered-on.
Possible to switch the function mode of fast/slow
speed by pressing in on the right joystick for a
short time. It is switched into fast speed mode
when two “beep" sounds come from the remote
control,pressing in on the right joystick for a
short time under fast speed mode and then one
“beep" sound would come from the remote control,
then it is then switched back into slow speed
mode.
5. 360° Stunt Flip Function:
When you are familiar with the basic actions, you
can proceed to explore even more exciting stunt
actions. Fly the drone to a height of 20 feet above
the ground, push the upper right corner button
(Stunt Flip Button) on the remote control and
simultaneously push the right joystick to the farthest
position of Front/Bacleeft/Right, the drone will now
execute the Front/Back/Left/Right stunt flip action.
6. Auto Hover Function:
After using the left joystick (throttle) to control
the ascending / descending flight of the drone,
release the left joystick (accelerator) and the
drone will hover at that height when the joystick
is released.
7. Headless function:
A. Defining forward direction:
2. After connecting the drone to the power supply,
push the switch to “ON" position, and adjust the
specified direction of the drone‘s head under
the headless mode as the new forward direction.
. Push the left joystick (throttle) on the remote
K control up to the farthest position and then pull
(6) , down to the farthest position. When the remote
l . , .
‘ ,.
l l
control issues a long beep sound, it means the
frequency and defining forward direction
functions are completed.
B. Calibration for the definition of the front:
1. When the drone encounters a direct impact
with foreign objects in the headless mode,
if there is an occurrence of deviation of the
defined direction, it is only required to push
both the left and right joysticks to the bottom
left corners simultaneously after placing the
flying direction of the drone in the correction
position. When the led light indicator of the
drone is in a long “ON” mode after slowly
flashing for 3 seconds, it indicates the
calibration is complete.
C. Toggling between headless function and normal function:
1. After the drone is matched with the corresponding
frequency, the drone would be in normal pattern
by default. At this time the indicator light on the
drone would be in a state of on for a long time.
After pressing in on the right joystick of the
remote control for 2 seconds, the remote control
would make a sound of “beep, beep, beep" to
show that it has entered into a state of headless
mode.Pressing in on right joystick for 2 seconds
then a long sound of “beep" would be heard to
show an exit status.(When under the state of
headless mode, four indicator lights on the drone
are led lights which flicker once every four
seconds)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2017:01:19 15:23:20+08:00
Creator                         : Adobe Acrobat 7.0
Modify Date                     : 2017:03:23 14:11:06+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2017:03:23 14:11:06+08:00
Creator Tool                    : Adobe Acrobat 7.0
Format                          : application/pdf
Document ID                     : uuid:39f3aa82-1b6d-4b80-ac24-565fde2bfdbf
Instance ID                     : uuid:d0f731d0-21c7-47f3-9430-7818627e5430
Producer                        : Adobe Acrobat 7.0 Image Conversion Plug-in
Page Count                      : 4

EXIF Metadata provided by EXIF.tools