SYMA MODEL AIRCRAFT GC887552-7 R/C TOYS User Manual 05 Manual 4 resize

Download:
Mirror Download [FCC.gov]
Document ID	2618751
Application ID	49JgemTgo14aLxikL1Vu8Q==
Document Description	Manual-4 resize.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	171.38kB (2142308 bits)
Date Submitted	2015-05-19 00:00:00
Date Available	2015-05-19 00:00:00
Creation Date	2015-05-18 19:11:45
Producing Software	GPL Ghostscript 9.0
Document Lastmod	2015-05-18 19:11:45
Document Title	05.) Manual-4 resize
Document Creator	PDFCreator Version 1.1.0
Document Author:	keiyeung

Step 4:Push the throttle lever to the highest position,
and then pull it back to the lowest position.
There will be one clear sound from the transmitter,
this shows that the quadcopter has entered into
the pre-fly state.
Function introduction
1.Low-voltage protection:
When four indicator lights on the bottom
of aircraft start to flicker, it means electric
quantity of the aircraft is insufficient. Please
control the aircraft to make a return voyage.
2.Over-current protection:
In the condition of rotating aircraft’s fan
blade, when being crashed or stuck,
aircraft’s circuit will conduct over-current
protection.
3.Horizontal correcting function:
Place the quadcopter on a horizontal postion,
then push transmitter both left and right lever
to lowest right conner for about 2-3 second ,
indicator on the quadcopter changed from
normal lights up to quickly flashing ;After 2-3
second ,the indicator changed to normal lights,
it means the quadcopter restarted /reset successfully.
4.3D eversion:
When you are familiar with the basic operation,
you can do some awesome& exciting tricks and
stunts! First of all,fly the aircraft to a height of
more than 3 meters, press the 3D Eversion
switch on the rear right side of the transmitter,
then push the right rudder(in any direction)
to make 360 degree flip.
Tips:3D eversion goes better when battery
power is enough.

0
Change battery of quadcopter
1.Push the on/off switch of
quadcopter to OFF position
than open the battery cover.
3.Take out the USB charging
cable, and insert the battery
power port to the small end
of it (Make sure the ports
connect tight and correct ).
5.Reconnect the battery wire to
power port than close the
battery cover.
2.Pull out the battery wire from
the power port.
4.To charge battery, please insert
the USB port of provided USB
charging cable to anyone USB
port of computer.
The indicator on USB cable will
light ON during charging battery,
than it will light OFF when battery
fully charged.
Caution:
When using the computer for
charging,please remember to pull
out the charging cable before
shutting down the computer.
Take the battery cover ,and close
the battery cover on the quadcopter.
Charging time: about 100 minutes — Flying time: about 5 minutes!
Cautions when charging:
1.When charging, please put this product on a dried or ventilated area and keep
it far away from heat source or explosive product.
2.When charging, please remove the batteries from the quadcopter. Then
charging process should be supervised by an adult so as not to cause an
accident.
3.When finish flying, please do not charge the battery if the surface temperature
is still not cool. Otherwise it may cause a swollen battery or even a fire hazard.

4.Please make sure that you use the original USB charging cable provided.When
the battery has been used for a long time, or appears to be swollen, please
replace them.
5.A battery when not in use for a long time will lose its charge automatically.
Charging or discharging too often may reduce the life of the battery.
Maintenance procedure
Problems
Aircraft has
no response
Causes
Solutions
1. Aircraft enters into low-voltage
protection.
2. Electric quantity of remote control is
insufficient, power indicator light will
flicker.
3. Channel selection of remote control
is inconsistent with aircraft’s match
codes.
1. Charge the aircraft.
2. Change remote control’s battery.
3. Adjust channels of remote control
and aircraft, and make them become
consistent.
Aircraft’s flying
response is
insensitive
1. Insufficient remote control’s electric
quantity.
2. Remote control with the same
frequency is transmitting interference.
1. Battery replacement.
2. Change the place where has no
transmitting interference of the
same frequency.
When hovering,
side flight is
formed
1. Have no horizontal correction.
1. Conduct horizontal correction, as
shown in p.8(3)(correcting function)
Spare parts
Here are alternative accessories. In order to provide convenience
for customer purchasing, every component are marked. Accessories
can be purchased from local dealer. Please specify the color when
purchasing.
;$
;%
Fuselage-white Fuselage-red
;
Front wheels
;
Battery cover
;&
Fuselage-black
;
Lampshades
;
Motor case
;
Steering putter

;
Blades
;
Rear wheels
;
Motor AB
;
;
Rear drive case Steering case
casting die
;
Receiver
board
;
ON/OFF
;
Battery
;
Light boards
;
Steering case
;
86%
;
Transmitter
Brerkdown&Dlagram




















Code
Quantity Code
Description
Description
Quantity Code
Description
Quantity
Upper body
Carbon rod
casting die
Battery cover knob
Lower body
Rear drive case
Fiber lampshade
Reversing blade
Battery cover
Steering putter
Rotating blade
Steering case
casting die
Wheels
Steering case
Motor case
Battery
Back lampshade
Receiver board
PP
PP
Maln parameter
PP
PP
Length of fuselage:180mm
Width of fuselage215mm
Height of fuselage:65mm
Code of main engine: ∎8X4
Battery:3.7V 600mAh
The company has the right of final interpretation
of this instruction manual statement.


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 5
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : 34abf073-ffaa-11e4-0000-282c96f17ccc
Producer                        : GPL Ghostscript  9.0
Keywords                        : ()
Modify Date                     : 2015:05:18 19:11:45+08:00
Create Date                     : 2015:05:18 19:11:45+08:00
Creator Tool                    : PDFCreator Version 1.1.0
Document ID                     : 34abf073-ffaa-11e4-0000-282c96f17ccc
Format                          : application/pdf
Title                           : 05.) Manual-4 resize
Creator                         : keiyeung
Description                     : ()
Author                          : keiyeung
Subject                         : 

EXIF Metadata provided by EXIF.tools