SZ DJI TECHNOLOGY 800RX1504 RONIN RX User Manual 1

SZ DJI TECHNOLOGY CO., LTD RONIN RX 1

Contents

User Manual 1

Thumb ControllerV1.0 2015.4User Manual
2 © 2015 DJI. All Rights Reserved. Disclaimers and WarningsCongratulations on purchasing your new DJI product. Carefully read the manual and all disclaimers before using this product. By using this product, you hereby agree to this disclaimer and signify that you have read it in its entirety. You agree that you are responsible for your own conduct, for all content that is created using this product, and for any consequences that may arise from either. You agree to use this product only for purposes that are proper and in accordance with local regulations, stated terms, and all applicable polices and guidelines. By reading this disclaimer, you also agree that: 1. Any part of this disclaimer is subject to change without prior notice. Refer to www.dij.com for the latest version.2.  DJI reserves the right of nal interpretation of this disclaimer.As DJI has no control over use, setup, nal assembly, modication, or misuse of its products, no liability shall be assumed or accepted for any resulting damage or injury. By using, setting up, or assembling the product, the user accepts all resulting liability. DJI assumes no liability for damages or injuries incurred directly or indirectly from the use of this product. DJI is a registered trademark. All names of products, brands, etc. appearing in this manual are trademarks or registered trademarks of their respective owner companies. This product and manual are copyrighted by DJI, with all rights reserved. No part of this product or manual shall be reproduced in any form without the prior written consent or authorization of DJI. No patent liability is assumed with respect to the use of the product or information contained herein.
© 2015 DJI. All Rights Reserved. 3ContentDisclaimers and Warnings 2In the Box 4Introduction 5Thumb Controller 5External Receiver (For Ronin Only) 6Installation 7Installing the Thumb Controller 7Installing the External Receiver (For Ronin Only) 8Connecting the Thumb Controller to the Gimbal 9Connecting the Thumb Controller to the Ronin-M 9Connecting the Thumb Controller to the Ronin 9Indicator Status 11Using the Thumb Controller 12Mode 12Function 13Gimbal Settings 13Device Settings 14DJI Assistant App Tuning 16DJI PC/MAC Assistant Tuning 17Settings 17Updating the Thumb Controller and the Receiver 18Specications 20
4 © 2015 DJI. All Rights Reserved. In the BoxCheck to ensure that all of the following items are included in the package. If any items are missing, contact DJI or your local dealer.The following items are included with the Thumb Controller for the Ronin-M:The following items are included with the Thumb Controller for the Ronin:Thumb Controller×1 Quick Release Accessory Mount×1USB Cable×1 Rubber Ring×1Receiver×1 Adhesive Tape×14-Pin Cable×1Thumb Controller×1 Quick Release Accessory Mount ×1USB Cable×1
© 2015 DJI. All Rights Reserved. 5IntroductionThe Thumb Controller is designed specically for DJI Ronin  series handheld gimbals. It provides a simple, intuitive interface for controlling the gimbal’s pan, tilt, and roll motion. The pressure-sensitive stick and the easy-to-read OLED display give Ronin users more control than ever before.The Thumb Controller communicates with the Ronin-M via a preinstalled internal receiver. An external receiver is needed when the Thumb Controller is used with the Ronin.Thumb Controller[1] Power ButtonPress and hold the power button to turn on/off the Thumb Controller[2] Status IndicatorIndicates the status of the Thumb Controller[3] OLED DisplayDisplays the menu of the Thumb Controller[4] Pressure-Sensitive StickTransmits the user’s input to the force sensor[1] [2][3][4]
6 © 2015 DJI. All Rights Reserved. [5] Micro-USB PortFor charging the Thumb Controller and upgrading its rmware[6] Override ButtonAllow the Thumb Controller to reactivated and updated following a failure update process[1] CAN PortConnects the receiver to the Ronin[2] Bind ButtonConnects the Thumb Controller to the Ronin[3] LED IndicatorIndicates the status of the receiver[4] Micro-USB PortFor upgrading the rmwareExternal Receiver (For Ronin Only)[5][6][1][2][3][4]
© 2015 DJI. All Rights Reserved. 7InstallationInstalling the Thumb Controller1. Install the quick-release accessory mount by clamping it around the handlebar of the Ronin and tightening the screw. Remember to place the rubber ring on the on the handlebar and clamp the accessory mount around it when installing the unit on the Ronin-M.2. Insert the Thumb Controller into the quick-release accessory mount and ensure that it is secure.
8 © 2015 DJI. All Rights Reserved. Installing the External Receiver (For Ronin Only)1. Use the 4-pin cable to connect the CAN port on the Ronin to the CAN 1 or Can 2 port on the receiver. 2. Use the adhesive tape to secure the receiver on the Ronin.
© 2015 DJI. All Rights Reserved. 9Connecting the Thumb Controller to the GimbalConnecting the Thumb Controller to the Ronin-M1. Turn on the Ronin-M.2. Press the Ronin-M’s Bind Button (shown below) one time. The LED indicator on the Ronin-M will rapidly blink green.3. Turn on the Thumb Controller. If the LED indicator on the Ronin-M and the LED indicator on the Thumb Controller both glow solid green, they have been successfully connected.Connecting the Thumb Controller to the Ronin1. Turn on the Ronin.2. Press the Bind Button on the receiver one time. The LED indicator on the receiver will rapidly blink green. 3. Turn on the Thumb Controller. If the LED indicator on the receiver and the LED indicator on the Thumb Controller both glow solid green, they have been successfully connected.Bind Button
10 © 2015 DJI. All Rights Reserved. The binding process only needs to be completed one time, unless the bind button is pressed or the Ronin/Ronin-M needs to be connected to another Thumb Controller.Bind Button
© 2015 DJI. All Rights Reserved. 11Indicator StatusThumb Controller LED Indicator Status Description — Solid Red The Thumb Controller is being updated Blinking Red The Thumb Controller is not connected to the receiver — Solid Green The Thumb Controller is connected to the receiver Blinking Green The update process is complete — Solid Yellow The Thumb Controller is fully chargedExternal Receiver LED Indicator Status Description — Solid Red The receiver is being updated Blinking Red The Thumb Controller is not connected to the receiver — Solid Green The Thumb Controller is connected to the receiver Blinking Green The update process is complete Blinking Green Quickly Binding
12 © 2015 DJI. All Rights Reserved. Using the Thumb ControllerTo enter the Main Menu, press and hold the center of the pressure-sensitive stick. MenuModeGimbal SettingDevice SettingDefault SettingAboutFunctionST OffST OnAuto CenterFastNormalSlowChannelDirectionCalibrationSleepSensitivityPower offRestoreVersion **Up/Down1min5min10minNever10min30min60minNeverPanRollTiltNonePanRollTiltNoneNormalReverseNormalReverseLeft/RightUp/DownLeft/RightCali SystemAuto TuneSoftHard

Navigation menu