SZ DJI TECHNOLOGY PR05GU31610 DJI CINESSD STATION User Manual x

Download:
Mirror Download [FCC.gov]
Document ID	3205424
Application ID	RPqRIuAjkd+/DcydZPJWbg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.07kB (325867 bits)
Date Submitted	2016-11-23 00:00:00
Date Available	2017-05-20 00:00:00
Creation Date	2017-12-18 06:21:02
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-18 06:21:02
Document Title	Microsoft Word - user manual.docx
Document Creator	PScript5.dll Version 5.2
Document Author:	elena

DJI CINESSD STATION(USB Port)
Quick Start Guide
V1.0 2016.10
Disclaimer
Congratulations on purchasing your new DJI™ product. The information in this document affects your safety and your legal rights and
responsibilities. Read this entire document carefully to ensure proper configuration before use. Failure to read and follow instructions and
warnings in this document may result in serious injury to yourself or others, damage to your DJI product, or damage to other objects in the
vicinity. This document and all other collateral documents are subject to change at the sole discretion of DJI.
By using this product, you hereby signify that you have read this disclaimer and warning carefully and that you understand and agree to abide
by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using this product, and for any
consequences thereof. You agree to use this product only for purposes that are proper and in accordance with all applicable laws, rules, and
regulations, and all terms, precautions, practices, policies and guidelines DJI has made and may make available.
DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product. The user shall
observe safe and lawful practices including, but not limited to, those set forth in this document. Notwithstanding above, your statutory rights
under applicable national legislation are not affected by this disclaimer.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its affiliated companies. Names of products, brands, etc.,
appearing in this document are trademarks or registered trademarks of their respective owner companies. This product and document are
copyrighted by DJI with all rights reserved. No part of this product or document shall be reproduced in any form without prior written consent
of or authorization from DJI.
Warning
1. Only use regulated cables specified in this guide.
2. Only use genuine DJI parts or parts certified by DJI. Unauthorized parts or parts from non‐DJI‐certified manufacturers may cause system
malfunctions and compromise safety.
3. Ensure the DJI CINESSD STATIONand its components are free from contamination (e.g. water, oil, soil and sand).
Introduction
The DJI CINESSD STATIONis used to export data from the DMAG.
Usage
Insert the DMAG into the DMAG Reader, then connect the DJI CINESSD STATIONto a computer via a USB 3.0 cable. DJI CINESSD
STATIONsupports external power supply and firmware update.
No other software is needed when exporting data from the DMAG. You may install the corresponding DJI software according to
your operation preference:
•
For Windows: Install DJI Camera Exporter.
•
For Mac: Install DJI CineLight.
1. DJI CINESSD STATIONsupports USB 2.0. However, the DJI CINESSD STATIONmay not be able to work normally when connecting it
to the computer via USB 2.0 cable without external power supply.
2. Ensure to insert the DMAG before connecting the DJI CINESSD STATIONto the computer.
3. Ensure to uninstall the DJI CINESSD STATIONbefore unplugging the cable after exporting data.
External Power Supply
Use external power supply when the capacity of the DMAG exceeds 480GB or the power supply capacity of computer is weak. Connect the DJI
CINESSD STATIONto the external power supply as shown below.
1. Ensure to connect the DJI CINESSD STATIONto the external power supply before connecting it to the computer via a USB 3.0
cable, or the external power supply may not work.
2. The AC adapter should have a voltage higher than 5 V, and a current higher than 1 A.
Firmware Update
Connect the DJI CINESSD STATIONto the computer to update its firmware.
To activate firmware update, please press the update button down when connecting the DJI CINESSD STATIONto the computer via
a USB 3.0 cable.
LED Description
LED Status
Description
Solid Green
Solid Yellow
Blinking Green
Connecting to the computer
Ready to update firmware
Exporting data
Specifications
Size
Weight
Operation Temperature Range
Compliance Information
90 mm×71.2 mm×27.5 mm
246 g
0° to 40° C
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:80ee1fae-a69f-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:22 02:10:38Z
Create Date                     : 2017:07:22 02:10:38Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:80ee1fae-a69f-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled

EXIF Metadata provided by EXIF.tools