SZ DJI TECHNOLOGY WM331A1704 Phantom 4 Pro User Manual 5
SZ DJI TECHNOLOGY CO., LTD Phantom 4 Pro 5
Contents
User Manual Part 3
Phantom 4 Pro/Pro+ User Manual Status LED Alarm Remote Controller Status â Solid Red Chime The remote controller is disconnected from the aircraft. â Solid Green Chime The remote controller is connected to the aircraft. Slow Blinking Red D-D-D...... Remote controller error. Red and Green/ Red and Yellow Alternate Blinks None HD downlink is disrupted. RTH LED Sound Remote Controller Status â Solid White Chime Aircraft is returning home. D... Sending Return-to-Home command to the aircraft. Blinking White DD .. .. .. Return-to-Home procedure in progress. Remote Controller Blinking White The Remote Status Indicator will blink red and sound an alert, when the battery level is critically low. Linking the Remote Controller The remote controller is linked to your aircraft before delivery. Linking is only required when using a new SFNPUFDPOUSPMMFSGPSUIFmSTUUJNF'PMMPXUIFTFTUFQTUPMJOLBOFXSFNPUFDPOUSPMMFS 1. Turn on the remote controller and connect to the mobile device. Launch the DJI GO app. 2. Turn on the Intelligent Flight Battery. 3. Enter âCameraâ and tap on and then tap âLinking RCâ button as shown below. RC Control Setting RC Calibration Stick Mode Default stick mode is Mode 2, changing stick modes alters the way the aircraft is controlled. Do not change unless familiar with your new mode. Button Customization $ /PU%FGJOFE $ /PU%FGJOFE You can customize the C1 and C2 buttons on the back of the RC. Linking RC Š 2016 DJI. All Rights Reserved. 37 Phantom 4 Pro/Pro+ User Manual 4. The remote controller is ready to link. The Remote Controller Status Indicator blinks blue and a beep is emitted. RC Control Setting RC Calibration Stick Mode Searching for aircraft frequency, Default stick mode is Mode 2, changing stick modes alters the way the aircraft is controlled. timeout in 54 seconds Do not change unless familiar with your new mode. Button Customization Press the linking button on the aircraft to link this remote controller Remote Controller $ $BODFM /PU%FGJOFE $ /PU%FGJOFE You can customize the C1 and C2 buttons on the back of the RC. Linking RC -PDBUFUIFMJOLJOHCVUUPOPOUIFTJEFPGUIFBJSDSBGU BTTIPXOJOUIFmHVSFCFMPX1SFTTUIFMJOLCVUUPO to start linking. The Remote Controller Status Indicator LED will display a solid green once the remote controller is successfully linked to the aircraft. Link Button The remote controller will un-link itself from an aircraft if a new remote controller is linked to the same aircraft. 38 Š 2016 DJI. All Rights Reserved. Camera and Gimbal This section provides the technical TQFDJmDBUJPOTPGUIFDBNFSBBOE explains the gimbalâs operation modes. Š 2016 DJI. All Rights Reserved. 39 Camera and Gimbal &DPHUD3URĂOH The on-board camera of Phantom 4 Pro/Pro+ uses the 1 inch CMOS sensor to capture video (up to 4096x2160p at 60fps) and 12 megapixel stills. You may choose to record the video in either MOV or MP4 format. Available picture shooting modes include burst, continuous, and time-lapse mode. A live preview of what the camera sees can be monitored on the connected mobile device via the DJI GO app. Camera Micro SD Card Slot To store your photos and videos, insert the Micro SD card into the slot, as shown below, before turning on the Phantom 4 Pro / Pro+. The Phantom 4 Pro / Pro+ comes with a 16 GB Micro SD card and supports Micro SD cards up to 64 GB. A UHS-1 Micro SD card is recommended due to their fast read and write speeds allowing you to save high-resolution video data. Gimbal Camera Do not remove the Micro SD card from the Phantom 4 Pro / Pro+ when it is turned on. To ensure the stability of the camera system, single video recordings are capped at 30 minutes. Camera Data Port Turn on the Phantom 4 Pro / Pro+ and connect a USB cable to the Camera Data Port to download photos and videos to your computer. 5IFBJSDSBGUNVTUCFUVSOFEPOCFGPSFBUUFNQUJOHUPBDDFTTUIFmMFTPOUIF.JDSP4%DBSE 40 Š 2016 DJI. All Rights Reserved. Phantom 4 Pro/Pro+ User Manual Camera Operation Use the Shutter and Video Recording buttons on the remote controller to shoot the images or videos through the DJI GO app. For more information about how to use these buttons, refer to âControlling the Camera Page 31â. Camera LED Indicator Camera LED Indicator lights up after the flight battery is powered on. It provides information on the working status of the camera. Camera LED Indicator Camera status System is warming up. Green Blink Once (0.5s off, 0.4s on ) Taking a single picture. Green Blink 3 Times (0.3s off, 0.1s on ) Taking 3 or 5 photos per shot. Slow Red Blink (1.6s on, 0.8s off ) Recording. Fast Red Blink (0.5s off, 0.2s on ) SD card error. Double Red Blink (0.1s on, 0.1s off, 0.1s on, 0.1s off) Solid Red Green and Red Blink (0.8s green on, 0.8s red on) Gimbal Camera Green Fast Blink (0.2s off, 0.1s on ) Overheated Camera System error. Firmware Upgrading Gimbal *LPEDO3URĂOH The 3-axis gimbal provides a steady platform for the attached camera, allowing you to capture clear, TUBCMFJNBHFTBOEWJEFP5IFHJNCBMDBOUJMUUIFDBNFSBXJUIJOBÂSBOHF Use the gimbal dial on the remote controller to control the tilt movement of the camera. Š 2016 DJI. All Rights Reserved. 41 Phantom 4 Pro/Pro+ User Manual Gimbal Operation Modes Two gimbal operation modes are available. Switch between the different operation modes on the camera settings page of the DJI GO app. Note that your mobile device must be connected to the remote controller for changes to take effect. Refer to the table below for details: Follow Mode The angle between gimbalâs orientation and aircraftâs nose remains constant at all times. FPV Mode The gimbal will synchronize with the movement of the aircraft to provide a mSTUQFSTPOQFSTQFDUJWFnZJOHFYQFSJFODF Gimbal Camera A gimbal motor error may occur in these situations: (1) the aircraft is placed on uneven ground or the gimbalâs motion is obstructed (2) the gimbal has been subjected to an excessive external force, such as a collision. Please UBLFPGGGSPNnBU PQFOHSPVOEBOEQSPUFDUUIFHJNCBMBUBMMUJNFT Flying in heavy fog or clouds may make the gimbal wet, leading to temporary failure. The gimbal will recover full functionality after it dries. It is normal for the gimbal to produce short pulse of beeping tone upon initialization. 42 Š 2016 DJI. All Rights Reserved. DJI GO app This section introduces the four main functions of the DJI GO app. Š 2016 DJI. All Rights Reserved. 43 DJI GO App 5IF%+*(0BQQJTBNPCJMFBQQMJDBUJPOEFTJHOFETQFDJmDBMMZGPS%+*FRVJQNFOU6TFUIJTBQQUPDPOUSPM the gimbal, camera, and other aircraft functions. The app features Equipment, Editor, Explorerand Me TFDUJPOT XIJDIBSFVTFEGPSDPOmHVSJOHZPVSBJSDSBGU FEJUJOHBOETIBSJOHZPVSQIPUPTBOEWJEFPTXJUI others. It is recommended that you use a tablet for the best experience. J1BE J1BE $POOFDUZPVS"JSDSBGU 5BLFUPUIF4LJFT PHANTOM 4 Pro DJI GO App Use AEB shoot to get more dynanic image &OUFS$BNFSB7JFX &RVJQNFOU &RVJQNFOU &EJUPS &EJUPS &YQMPSF &YQMPSF .F .F Equipment 0OUIF&RVJQNFOUQBHF ZPVDBOFOUFS$BNFSB7JFX WJTJUUIF"DBEFNZPSWJFXZPVSnJHIUSFDPSET Camera View 25 4"'&50'-: (14 5 6 P-GPS 09:29 12 10 11 61% 12 AE 24 13 23 14 15 22 16 21 17 18 20 H 10.0M D 30M V 11.0M/S 19 44 Š 2016 DJI. All Rights Reserved. Phantom 4 Pro/Pro+ User Manual [1] System Status : Indicates the current aircraft system status and GPS signal strength. [2] Battery Level Indicator : Describes the battery level of the aircraft according to its immediate status. The colored zones represent the various stages of battery level. When the battery level drops to a certain stage, the system will prompt the user to take the appropriate action. [3] Flight Mode 5IFUFYUOFYUUPUIJTJDPOJOEJDBUFTUIFDVSSFOUnJHIUNPEF 5BQUIJTJDPOUPDPOmHVSFUIF.BJO$POUSPMMFS4FUUJOHT UPDIBOHFUIFnJHIUMJNJUTBOETFUUIFHBJO values. [4] GPS Signal Strength DJI GO App : Shows the current GPS signal strength. White bars indicate adequate GPS strength. [5] Remote Controller Signal : Shows the signal strength of the remote controller. [6] HD Video Link Signal Strength : Shows the signal strength of the HD video downlink between the aircraft and the remote controller. [7] Battery Level 61% : Shows the current battery level. Tap this icon to view the battery information menu where you can set the battery warning thresholds and view the battery log. [8] General Settings 5BQUIJTJDPOUPWJFX(FOFSBM4FUUJOHTXIFSFZPVDBOTFUUIFnJHIUQBSBNFUFST BOEFOBCMFUIF Flight Route display. [9] Camera Operation Bar The bar will be displayed when using the on-board camera. Shutter and Recording Settings : Tap this icon to enter various camera value settings including the Color Mode, Video Size, and Image Size. Shutter : Tap this button to take a single photo. Press and hold this button to switch between Single Shot, Triple Shot and Timed Shot modes. Record : Tap once to start recording video, then tap again to stop recording. You can also press the Video Recording Button on the remote controller. Playback : Tap this icon to play back photos and videos after they are captured. Š 2016 DJI. All Rights Reserved. 45 Phantom 4 Pro/Pro+ User Manual Camera Settings : Tap this icon to set the ISO, Shutter Speed and Exposure Value of the camera. [10] Mini Map %JTQMBZTUIFnJHIUQBUIPGUIFDVSSFOUnJHIU5BQUIF.JOJ.BQUPTXJUDICFUXFFO$BNFSB7JFXBOE Map View. [11] Flight Telemetry DJI GO App H: 39M V.S 2.3 M/S D: 210M H.S 4.2 M/S 232M Flight Attitude and Radar Function: 5IFBJSDSBGUTnJHIUBUUJUVEFJTJOEJDBUFECZUIFUBSHFUMJLFJDPO (1) The red arrow shows which direction the aircraft is facing. (2) The ratio of the grey area to the blue area indicates the aircraftâs pitch. (3) The horizontal level of the grey area indicates the aircraftâs roll angle. Flight Parameters: Altitude: Vertical distance from the Home Point. Distance: Horizontal distance from the Home Point. Vertical Speed: Movement speed across a vertical distance. Horizontal Speed: Movement speed across a horizontal distance. Aircraft Distance: The horizontal distance between the aircraft and the operator. [12] Intelligent Flight Mode : This icon displays the Intelligent Flight Mode settings when the aircraft has entered F-mode. Tap to select one of the Intelligent Flight Modes. Refer to Intelligent Flight Modes (p. 62) for details. [13] Return-to-Home (RTH) : Initiate RTH home procedure. Tap to have the aircraft return to the latest Home Point. [14] Gimbal Operation Mode This icon will be displayed when using a DJI gimbal (or camera). Tap to select a mode or re-align the gimbal. 46 Š 2016 DJI. All Rights Reserved. Phantom 4 Pro/Pro+ User Manual [15] Auto Takeoff/Landing : Tap to initiate auto takeoff or landing. [16] Livestream : This icon indicates the current video feed is being broadcast live on YouTube. Ensure that mobile data service is available on your mobile device. [17] Back : Tap this icon to return to the main menu. Editor SkyPixel Find out about our latest events, featured products and trending Skypixel uploads in the Explore page. Me If you already have a DJI account, you will be able to participate in forum discussions, earn Credits in the DJI Store, and share your artwork with the community. Š 2016 DJI. All Rights Reserved. 47 DJI GO App An intelligent video editor is built into the DJI GO app. After recording several video clips and downloading them to your mobile device, go to Editor on the home screen. You can then select a UFNQMBUFBOEBTQFDJmFEOVNCFSPGDMJQTXIJDIBSFBVUPNBUJDBMMZDPNCJOFEUPDSFBUFBTIPSUmMNUIBUDBO be shared immediately. Flight 5IJTTFDUJPOEFTDSJCFTTBGFnJHIU QSBDUJDFTBOEnJHIUSFTUSJDUJPOT 48 Š 2016 DJI. All Rights Reserved. Flight 0ODFQSFnJHIUQSFQBSBUJPOJTDPNQMFUF JUJTSFDPNNFOEFEUIBUZPVVTFUIFnJHIUTJNVMBUPSJOUIF%+*(0 BQQUPIPOFZPVSnJHIUTLJMMTBOEQSBDUJDFnZJOHTBGFMZ&OTVSFUIBUBMMnJHIUTBSFDBSSJFEPVUJOBOPQFO area. Flight Environment Requirements Flight Limits and No-Fly Zones All unmanned aerial vehicle (UAV) operators should abide by all regulations set forth by government and SFHVMBUPSZBHFODJFTJODMVEJOHUIF*$"0BOEUIF'""'PSTBGFUZSFBTPOT nJHIUTBSFMJNJUFECZEFGBVMU which helps users operate this product safely and legally. Flight limitations include height limits, distance limits, and No-Fly Zones. When operating in P-mode, height limits, distance limits, and No-Fly Zones function concurrently to manage flight safety. In A-mode, only height limits are in effect, which by default prevent the aircraft altitude from exceeding 1640 feet (500 m) . 0D[LPXPĂLJKWDOWLWXGH 5DGLXV/LPLWV .BYJNVNnJHIUBMUJUVEFBOESBEJVTMJNJUTNBZCFDIBOHFEJOUIF%+*(0BQQ#FBXBSFUIBUUIFNBYJNVN nJHIUBMUJUVEFDBOOPUFYDFFEGFFU NFUFST *OBDDPSEBODFXJUIUIFTFTFUUJOHT ZPVS1IBOUPN 1SP1SP XJMMnZJOBSFTUSJDUFEDZMJOEFS BTTIPXOCFMPX Maximum Flight Altitude Max Radius Home Point Height of aircraft when turned on Š 2016 DJI. All Rights Reserved. 49 Flight 1. Do not use the aircraft in severe weather conditions. These include wind speeds exceeding 10 m/s , snow, rain and fog. 0OMZnZJOPQFOBSFBT5BMMTUSVDUVSFTBOEMBSHFNFUBMTUSVDUVSFTNBZBGGFDUUIFBDDVSBDZPGUIFPO board compass and GPS system. 3. Avoid obstacles, crowds, high voltage power lines, trees, and bodies of water. 4. Minimize interference by avoiding areas with high levels of electromagnetism, including base stations and radio transmission towers. 5. Aircraft and battery performance is subject to environmental factors such as air density and temperature. #FWFSZDBSFGVMXIFOnZJOHBUBMUJUVEFTHSFBUFSUIBO GFFU NFUFST BCPWFTFBMFWFM BTUIF performance of the battery and aircraft may be affected. 6. The Phantom 4 Pro / Pro+ cannot operate within the polar areas. Phantom 4 Pro/Pro+ User Manual GPS Signal Strong Blinking Green Flight Limits DJI GO app Aircraft Status Indicator Maximum Flight Altitude Aircraft's altitude cannot FYDFFEUIFTQFDJmFEWBMVF Warning: Height limit reached. None. Max Radius Flight distance must be within the max radius. Warning: Distance limit reached. 3BQJESFEnBTIJOH when close to the max radius limit. GPS Signal Weak Blinking Yellow Flight Flight Limits DJI GO app Aircraft Status Indicator Maximum Flight Altitude Height is restricted to 26 feet (8 meters)when the GPS signal is weak and Vision Positioning is activated. Height is restricted to 164 feet (50 meters) when the GPS signal is weak and Vision Positioning is inactivated. Warning: Height limit reached. None. Max Radius No limits *GUIFBJSDSBGUnJFTPVUPGUIFMJNJU ZPVDBOTUJMMDPOUSPMUIFBJSDSBGU CVUZPVDBOOPUnZJUBOZ farther. *GUIFBJSDSBGUnJFTPVUPGUIFNBYSBEJVTJUXJMMnZCBDLXJUIJOSBOHFBVUPNBUJDBMMZXIFO(14 signal is strong. No-Fly Zones All No-Fly Zones are listed on the DJI official website at http://www.dji.com/flysafe/no-fly. No-Fly Zones are divided into Airports and Restricted Areas. Airports include major airports and flying mFMETXIFSFNBOOFEBJSDSBGUPQFSBUFBUMPXBMUJUVEFT3FTUSJDUFE"SFBTJODMVEFCPSEFSMJOFTCFUXFFO countries or sensitive institute. The details of the No-Fly Zones are explained as follow: Airport (1) Airport No-Fly Zone are comprised of Take-off Restricted zones and Restricted Altitude Zones. Each zone features circles of various sizes. (2) R1 miles (value of the R1 depends on the size and shape of the airport) around the airport is a Takeoff restricted zone, inside of which take off is prevented. 'SPN3NJMFUP3 NJMFBSPVOEUIFBJSQPSUUIFnJHIUBMUJUVEFJTMJNJUFEUPBEFHSFFJODMJOBUJPO 4UBSUJOHBUGFFU NFUFST GSPNUIFFEHFPGBJSQPSUBOESBEJBUJOHPVUXBSE5IFnJHIUBMUJUVEFJT limited to 1640 feet (500 meters) at R1+1 mile (4) When the aircraft enters within 320 feet (100 meters) of No-Fly Zones, a warning message will appear on the DJI GO app. 50 Š 2016 DJI. All Rights Reserved. Phantom 4 Pro/Pro+ User Manual GFFU GFFU NJMF GFFU 3 3 Restricted Area N Š 2016 DJI. All Rights Reserved. 51 Flight 3FTUSJDUFE"SFBTEPFTOPUIBWFnJHIUBMUJUVEFSFTUSJDUJPOT (2) R miles around the designated restriction area is a Take-off Restricted area. Aircraft cannot take off XJUIJOUIJT[POF5IFWBMVFPG3WBSJFTCBTFEPOUIFEFmOJUJPOPGUIFSFTUSJDUFEBSFBT (3) A âwarning zoneâ has been set around the Restricted Area. When the aircraft approaches within 0.062 miles (100 m) of this zone, a warning message will appear on the DJI GO app. Phantom 4 Pro/Pro+ User Manual GPS Signal Strong Zone /PnZ;POF Flight RestrictedBMUJUVEFnJHIU zone Warning zone Free zone Blinking Green Restriction DJI GO app Prompt Motors will not start. Warning: You are in a No-fly zone. Take off prohibited. If the aircraft enters the restricted area in A-mode, but is switched to P-mode, the aircraft will automatically descend, land, and stop its motors. 8BSOJOH:PVBSFJOBOPnZ[POF Automatic landing has begun. If the aircraft enters the restricted area in A-mode, but is switched to P-mode, it will descend to an appropriate altitude and hover 15 feet below the altitude limit. R1: Warning: You are in a restricted zone. Descending to safe altitude. R2: Warning: You are in a SFTUSJDUFE[POF.BYJNVNnJHIU altitude is restricted to between 20m and 500m. Fly cautiously. Aircraft Status Indicator 3FEnBTIJOH /PnJHIUSFTUSJDUJPOBQQMJFT CVU Warning: You are approaching a there will be a warning . restricted zone, Fly cautiously. No restrictions. None. None. Semi-automatic descent: All stick commands are available except the left stick command during the descent and landing process. Motors will stop automatically after landing. 8IFOnZJOHJOBTBGFUZ[POF UIFBJSDSBGUhTTUBUVTJOEJDBUPSXJMMCMJOLSFESBQJEMZBOEDPOUJOVFGPS TFDPOET UIFOTXJUDIUPJOEJDBUFDVSSFOUnZJOHTUBUVTBOEDPOUJOVFGPSTFDPOETBUXIJDI point it will switch back to blinking red. 'PSTBGFUZSFBTPOT QMFBTFEPOPUnZDMPTFUPBJSQPSUT IJHIXBZT SBJMXBZTUBUJPOT SBJMXBZMJOFT city centers, or other sensitive areas. Fly the aircraft only within your line of sight. 3UHĂLJKW&KHFNOLVW 1. Remote controller, Intelligent Flight Battery, and mobile device are fully charged. 1SPQFMMFSTBSFNPVOUFEDPSSFDUMZBOEmSNMZ 3. Micro SD card has been inserted, if necessary. 4. Gimbal is functioning normally. 5. Motors can start and are functioning normally. 6. The DJI GO app is successfully connected to the aircraft. 7. Ensure that the sensors for the Obstacle Sensing System are clean. 52 Š 2016 DJI. All Rights Reserved. Phantom 4 Pro/Pro+ User Manual Calibrating the Compass Only calibrate the compass when the DJI GO app or the status indicator prompt you to do so. Observe the following rules when calibrating your compass: DO NOT calibrate your compass where there is a chance of strong magnetic interference, such as magnetite, parking structures, and steel reinforcements underground. DO NOT carry ferromagnetic materials with you during calibration such as cellular phones. The DJI GO app will prompt you to resolve the compass issue if the compass is affected by strong interference after calibration is complete. Follow the prompted instructions to resolve the compass issue. Calibration Procedures 3. Hold the aircraft vertically, with nose pointing downward, and rotate it 360 degrees around the center axis. Recalibrate the compass if the Aircraft Status Indicator glows solid red. Š 2016 DJI. All Rights Reserved. 53 Flight Choose an open area to carry out the following procedures. &OTVSFUIBUUIFDPNQBTTJTDBMJCSBUFE*GZPVEJEOPUDBMJCSBUFUIFDPNQBTTBTQBSUPGZPVSQSFnJHIU preparations, or if you have moved to a new location since the last calibration, tap the Aircraft Status Bar in the app and select âCalibrateâ, then follow the on-screen instructions. 2. Hold the aircraft horizontally and rotate 360 degrees. The Aircraft Status Indicators will display a solid green light. Phantom 4 Pro/Pro+ User Manual 4. Re-calibrate the aircraft if the aircraft status indicators blink red. If the Aircraft Status Indicator blinks red and yellow after the calibration procedure, move your aircraft to a different location and try again. $BMJCSBUFUIFDPNQBTTCFGPSFFBDInJHIU-BVODIUIF%+*(0BQQBOEGPMMPXUIFPOTDSFFO instructions to calibrate the compass. DO NOT calibrate the compass near metal objects such as a metal bridge, cars, scaffolding. If the aircraft status indicators is blinking red and yellow alternately after placing the aircraft on the ground, the compass has detected magnetic interference. Change your location. When to Recalibrate Flight 1.When compass data is abnormal and the Aircraft Status Indicator is blinking green and yellow. 8IFOnZJOHJOBOFXMPDBUJPOPSJOBMPDBUJPOUIBUJTEJGGFSFOUGSPNUIFNPTUSFDFOUnJHIU 3.When the mechanical or physical structure of the Phantom 4 Pro / Pro+ has been changed. 8IFOTFWFSFESJGUJOHPDDVSTJOnJHIU JF1IBOUPN1SP1SP EPFTOPUnZJOTUSBJHIUMJOF Auto Takeoff and Auto Landing Auto Takeoff Use auto takeoff only if the Aircraft Status Indicators are blinking green. Follow the steps below to use the auto takeoff feature: 1. Launch the DJI GO app, and enter âCameraâ page. $PNQMFUFBMMTUFQTPOUIFQSFnJHIUDIFDLMJTU 3. Tapâ w BOEDPOmSNUIBUDPOEJUJPOTBSFTBGFGPSnJHIU4MJEFUIFJDPOUPDPOmSNBOEUBLFPGG 4. Aircraft takes off and hovers at (1.2 meters) above ground. Aircraft Status Indicator blinks rapidly when it is using the Vision Position System for stabilization. The aircraft will automatically hover below 3 meters. It is recommended to wait until there is TVGmDJFOU(14MPDLCFGPSFVTJOHUIF"VUP5BLFPGGGFBUVSF Auto-Landing Use auto-landing only if the Aircraft Status Indicators are blinking green. Follow the steps below to use the auto-landing feature: 1. Check the landing area condition before tapping â the on-screen instructions. 54 Š 2016 DJI. All Rights Reserved. w4MJEFUIFJDPOUPDPOmSNMBOEJOH5IFOGPMMPX Phantom 4 Pro/Pro+ User Manual Starting/Stopping the Motors Starting the Motors A Combination Stick Command (CSC) is used to start the motors. Push both sticks to the bottom inner or outer corners to start the motors. Once the motors have started spinning, release both sticks simultaneously. OR Stopping the Motors OR Method 1 Method 2 6WRSWKHPRWRUPLGĂLJKW Pull the left stick to the bottom inside corners and press the RTH button at the same time. Only stop the PRWRUVPLGĂąLJKWLQHPHUJHQF\VLWXDWLRQVZKHQGRLQJVRFDQUHGXFHWKHULVNRIGDPDJHRULQMXU\ 5HIHUWRWKHXVHUPDQXDOIRUGHWDLOV Š 2016 DJI. All Rights Reserved. 55 Flight There are two methods to stop the motors. Method 1: When Phantom 4 Pro / Pro+ has landed, push the left stick down , then conduct the same CSC that was used to start the motors, as described above . Motors will stop immediately. Release both sticks once motors stop. Method 2: When the aircraft has landed, push and hold the left stick down. The motors will stop after three seconds. Phantom 4 Pro/Pro+ User Manual Flight Test Takeoff/Landing Procedures 1MBDFUIFBJSDSBGUJOBOPQFO nBUBSFBXJUIUIFCBUUFSZMFWFMJOEJDBUPSTGBDJOHUPXBSETZPV 2. Turn on the remote controller and your mobile device, then turn on the Intelligent Flight Battery. 3. Launch the DJI GO app and enter the Camera page. 4. Wait until the Aircraft Indicators blink green. This means the Home Point is recorded and it is now safe UPnZ*GUIFZnBTIZFMMPX UIF)PNF1PJOUIBTOPUCFFOSFDPSEFE 5. Push the left stick up slowly to take off or use Auto Takeoff. 6. Shoot photos and videos using the DJI GO app. 7. To land, hover over a level surface and gently pull down on the left stick to descend. 8. After landing, execute the CSC command or hold the left stick at its lowest position until the motors stop. 5VSOPGGUIF*OUFMMJHFOU'MJHIU#BUUFSZmSTU UIFOUIF3FNPUF$POUSPMMFS Flight 8IFOUIF"JSDSBGU4UBUVT*OEJDBUPSTCMJOLZFMMPXSBQJEMZEVSJOHnJHIU UIFBJSDSBGUIBTFOUFSFE'BJMTBGF mode. A low battery level warning is indicated by the Aircraft Status Indicators blinking red slowly or SBQJEMZEVSJOHnJHIU 8BUDIPVSWJEFPUVUPSJBMTGPSNPSFnJHIUJOGPSNBUJPO Video Suggestions and Tips (PUISPVHIUIFGVMMQSFnJHIUDIFDLMJTUCFGPSFFBDInJHIU 2. Select the desired gimbal operation mode in the DJI GO app. 0OMZTIPPUWJEFPXIFOnZJOHJO1NPEF "MXBZTnZJOHPPEXFBUIFSBOEBWPJEnZJOHJOSBJOPSIFBWZXJOE 5. Choose the camera settings that suit your needs. Settings include photo format and exposure compensation. 1FSGPSNnJHIUUFTUTUPFTUBCMJTInJHIUSPVUFTBOEQSFWJFXTDFOFT 7. Push the control sticks gently to keep the aircraftâs movement smooth and stable. 56 Š 2016 DJI. All Rights Reserved. Appendix Š 2016 DJI. All Rights Reserved. 57 Appendix 6SHFLĂFDWLRQV Aircraft Weight (Battery & Propellers Included) 1380 g Diagonal Size (Excluding Propellers) 350 mm Max Ascent Speed Sport mode: 19.7ft/s(6 m/s); GPS mode: 16.4ft/s(5 m/s) Max Descent Speed Sport mode: 13.1ft/s(4 m/s); GPS mode: 9.8ft/s (3 m/s) Max Speed 44.7mph (20 m/s); 35.8mph (16 m/s) (Attitude mode); 31.3mph(14 m/s) (GPS mode) Max Tilt Angle 42° (Sport mode); 35° (Attitude mode); 25° (GPS mode) Max Angular Speed 250°/s (Sport mode); 150°/s (Attitude mode) Max Service Ceiling Above Sea Level 6000 m Max Flight Time Approx. 29 minutes Operating Temperature Range 32° to 104° F (0° to 40° C) Satellite Systems GPS/GLONASS Vertical: Âą0.1 m (With Vision Positioning); Âą0.5 m (With GPS Appendix GPS Hover Accuracy Range Positioning) Horizontal: Âą0.3 m (With Vision Positioning); Âą1.5 m (With GPS Positioning) Gimbal Stabilization 3-axis (pitch, roll, yaw) Controllable Range Pitch: - 90° to + 30° Max Controllable Angular Speed Pitch: 90°/s Angular Control Accuracy Âą0.03° Vision Positioning System Velocity Range ĂľNT NBCPWFHSPVOE Altitude Range 0 - 33 feet ( 0 - 10 m ) Operating Range 0 - 33 feet ( 0 - 10 m ) Measuring Frequency 10 Hz Operating Environment Surface with clear pattern and adequate lighting ( lux > 15 ) Obstacle Sensing System Obstacle Sensory Range Front and Rear: 2 - 98 feet ( 0.7 - 30 m ) Both Sides: 0 - 22 feet ( 0.2 - 7 m ) Front and Rear:Âą60°(Horizontal),Âą54°(Vertical) FOV Both Sides: Âą35°(Horizontal),Âą10°(Vertical) Measuring Frequency 10 Hz Front and Rear: Surface with clear pattern and adequate Operating Environment lighting ( lux > 15 ) Both Sides: Wall, trees, humans 58 Š 2016 DJI. All Rights Reserved. Phantom 4 Pro/Pro+ User Manual Camera Sensor 1ââ CMOS; Effective pixels: 20 M FOV ( Field Of View ) 84° 24 mm ( 35 mm format equivalent ) Lens ISO Range GGBVUPGPDVTBUNĂą Video: 100 â 3200 (Auto); 100 - 6400 (Manual) Photo:100 - 3200 (Auto);100 - 12800(Manual) Mechanical Shutter 8 - 1/2000 s Electronic Shutter Speed 8 - 1/8000 s 3:2 Aspect Ratio: 5472Ă3648 Max Image Size 4:3 Aspect Ratio: 4864Ă3648 16:9 Aspect Ratio: 5472Ă3078 16:9 Aspect Ratio: 5248Ă2952 (3840Ă2160 24/25/30p, 2720Ă1530 24/25/30p, 1920Ă1080 24/25/30p, 1280Ă720 24/25/30p) PIV Image Size 3840Ă2160 (3840Ă2160 48/50p, 2720Ă1530 48/50p, 1920Ă1080 48/50/60p, 1280Ă720 48/50/60p) 17:9 Aspect Ratio: Appendix 4896Ă2592 (4096Ă2160 24/25/30p) 4096Ă2160 (4096Ă2160 48/50p) Single shot Burst shooting: 3/5/7/10/14 frames Still Photography Modes Auto Exposure Bracketing (AEB): 3/5 Bracketed frames at 0.7EV Bias Time-lapse (interval: 2/3/5/7/10/15/30/60) H.265 UHD: 4096Ă2160 24/25/30p @100Mbps UHD: 3840Ă2160 24/25/30p @100Mbps UHD: 2720Ă1530 24/25/30p @65Mbps 2720Ă1530 48/50/60p @80Mbps FHD: 1920Ă1080 24/25/30p @50Mbps 1920Ă1080 48/50/60p @65Mbps HD: Video Recording Modes 1280Ă720 24/25/30p @25Mbps 1280Ă720 48/50/60p @35Mbps H.264 UHD: 4096Ă2160 24/25/30/48/50/60p @100Mbps UHD: 3840Ă2160 24/25/30/48/50/60p @100Mbps UHD: 2720Ă1530 24/25/30p @80Mbps 2720Ă1530 48/50/60p @100Mbps FHD: 1920Ă1080 24/25/30p @60Mbps 1920Ă1080 48/50/60/120p @80Mbps HD: 1280Ă720 24/25/30p @30Mbps 1280Ă720 48/50/60/120p @45Mbps Š 2016 DJI. All Rights Reserved. 59 Phantom 4 Pro/Pro+ User Manual Max. Bitrate Of Video Storage 100 Mbps Supported File Systems '"5 Ăľ(# FY'"5 (# Photo JPEG, DNG (RAW), J+R Video MP4/MOV (AVC/H.264; HEVC/H.265) Supported SD Cards Micro SD, Max capacity: 128GB. Class 10 or UHS-1 rating required Operating Temperature Range 32° to 104° F (0° to 40° C) Remote Controller Operating Frequency Max Transmission Distance 2.400 - 2.483 GHz, 5.15-5.25GHz and 5.725 - 5.850 GHz FCC Compliant: 3.1 mi (5 km); CE Compliant: 2.2 mi (3.5 km) Operating Temperature Battery Transmitter Power (Unobstructed, free of interference) 32° to 104° F (0° to 40° C) 6000 mAh LiPo 2S For GL300E 2.400-2483GHz FCC:23.2 dBm CE: 17dBm 5.15-5.250GHz&5.725-5.850GHz FCC: 24.5 dBm CE: 14dBm For GL300F 2.400-2483GHz FCC: 23.2dBm CE:17dBm 5.725-5.850GHz FCC: 22.5dBm CE: 14dBm Appendix Operating Voltage Video Output Port 1.2 A @7.4 V GL300E: USB Mobile Device Holder GL300F: HDMI, USB GL300E: Tablets and smartphones GL300F: Built-in Display device Charger Voltage 17.4 V Rated Power 100 W Intelligent Flight Battery (PH4-5870 mAh-15.2 V) Capacity 5870 mAh Voltage 15.2 V Battery Type LiPo 4S Energy 89.2 Wh Net Weight 468 g Operating Temperature 14° to 104° F (-10° to 40° C) Max. Charging Power 100 W Aircraft Status Indicator Description Normal Red, Green and Yellow Flash Alternatively Turning on and Self-Diagnostics Green and Yellow Flash Alternatively Aircraft Warming Up Green Flashes Slowly X2 Green Flashes Twice Yellow Flashes Slowly 60 Š 2016 DJI. All Rights Reserved. Ready to go (P-mode with GPS and Vision Positioning) Ready to go (P-mode with Vision Positioning but without GPS) Ready to go (A-mode but No GPS and Vision Positioning) Phantom 4 Pro/Pro+ User Manual Warning Fast Yellow Flashing Remote Controller Signal Lost Slow Red Flashing Low Battery Warning Fast Red Flashing Critical Battery Warning Red Flashing Alternatively IMU Error â Solid Red Critical Error Red and Yellow Flash Alternatively Compass Calibration Required Firmwares Update 5IFmSNXBSFVQEBUFXJMMUBLFBSPVOENJOVUFT*UJTOPSNBMUIBUUIFHJNCBMHPMJNQ BJSDSBGU status indicator blinks abnormally and the aircraft reboots. Please wait patiently until the update is complete. There will be no sound prompts during the update. Ensure the computer has access to the Internet. Ensure the battery level is adequate for the Intelligent Flight Battery. %POPUEJTDPOOFDUUIFBJSDSBGUGSPNUIFDPNQVUFSEVSJOHmSNXBSFVQEBUF Intelligent Flight Mode Intelligent Flight mode includes Course Lock, Home Lock, Point of Interest (POI), Follow Me and 8BZQPJOUTGFBUVSFTUPBTTJTUVTFSTUPDBQUVSFQSPGFTTJPOBMTIPPUTEVSJOHUIFnJHIU$PVSTF-PDLBOE Home Point lock ensure the lock of aircraft orientation, sparing the user to focus more on other operBUJPOT1PJOUPG*OUFSFTU 'PMMPX.FBOE8BZQPJOUTNPEFFOBCMFBJSDSBGUUPnZBVUPNBUJDBMMZBDDPSEJOH UPUIFQSFTFUnJHIUNBOFVWFST Course Lock Lock the current nose direction as the aircraftâs forward direction. The aircraft will move in the locked directions regardless of its orientation (yaw angle). Home Lock Pull the pitch stick backward to move the aircraft toward its recorded Home Point. Point of Interest The aircraft will orbit around the subject automatically to allow the operator to be more focus on framing their shoot on the subject in Point of Interest. Š 2016 DJI. All Rights Reserved. 61 Appendix Use DJI Assistant 2 or DJI GO app to update aircraft and Remote Controller. Follow the instructions CFMPXUPVQEBUFUIFmSNXBSFUISPVHI%+*"TTJTUBOU 1. Power on your aircraft and connect it to a computer with a USB cable. 2. Launch DJI Assistant 2 and login with your DJI account. 3. Select âPhantom 4 Pro / Pro+â and click the âFirmware Updatesâ on the left panel. 4FMFDUUIFmSNXBSFWFSTJPOUIBUZPVXJTIUPVQEBUF %+*"TTJTUBOUXJMMEPXOMPBEBOEVQEBUFUIFmSNXBSFBVUPNBUJDBMMZ 3FCPPUUIFBJSDSBGUBGUFSUIFmSNXBSFVQEBUFJTDPNQMFUF Phantom 4 Pro/Pro+ User Manual Follow Me A virtual tether is created between the aircraft and the mobile device so that the aircraft can track your movement as you move. Note that Follow Me performance is subject to the GPS accuracy on the mobile device. 3FDPSEBnJHIUQBUI UIFOUIFBJSDSBGUXJMMnZBMPOHUIFTBNFQBUISFQFBUFEMZXIJMF Waypoints ZPVDPOUSPMUIFDBNFSBBOEPSJFOUBUJPO5IFnJHIUQBUIDBOCFTBWFEBOESFBQQMZJO the future. After-Sales Information Visit the following pages to learn more about After-sales policy and warranty information: 1. After-sales Policy: http://www.dji.com/service 2. Refund Policy: http://www.dji.com/service/refund-return 3. Paid Repair Service: http://www.dji.com/service/repair-service 4. Warranty Service: http://www.dji.com/service/warranty-service FCC Compliance Appendix FCC Warning Message "OZDIBOHFTPSNPEJmDBUJPOTOPUFYQSFTTMZBQQSPWFECZUIFQBSUZSFTQPOTJCMFGPSDPNQMJBODFDPVMEWPJE the userâs authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: For Phantom 4 Pro / WM331A This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For remote control with model GL300E and GL300F ,SAR tests are conducted using standard operating positions accepted by the FCC/IC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. Before a new model is a available for sale to the public, it must be tested and certified to the FCC/IC that it does not exceed the exposure limit established by the FCC/IC, Tests for each product are performed in positions and locations as required by the FCC/IC. For Handheld operation, this device has been tested and meets the FCC/IC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that Contains no metal. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in 62 Š 2016 DJI. All Rights Reserved. Phantom 4 Pro/Pro+ User Manual a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: âReorient or relocate the receiving antenna. âIncrease the separation between the equipment and receiver. âConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. âConsult the dealer or an experienced radio/TV technician for help. IC RSS warning This device complies with Industry Canada licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prĂŠsent areil est conforme aux CNR d'Industrie Canada licables aux areils radio exempts de licence. L'exploitation est autorisĂŠe aux deux conditions suivantes: (1) l'areil ne doit pas produire de brouillage, et (2) l'utilisateur de l'areil doit accepter tout brouillage radioĂŠlectrique subi, mĂŞme si le brouillage est susceptible d'en compromettre le fonctionnement. For Phantom 4 Pro / WM331A This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. "OZ$IBOHFTPSNPEJmDBUJPOTOPUFYQSFTTMZBQQSPWFECZUIFQBSUZSFTQPOTJCMFGPSDPNQMJBODFDPVME void the userâs authority to operate the equipment. KCC Warning Message ಯ럊鲎ęŠęŤęŤęšéąëŠëëëšëłëżąę˛éľéąęŤŚëŠë˝ëąęľęëęşęť˝ëšéąéľęéˇęŤęšęąéąëźęŻę˝ťęąŞéą˝é˛ ರ ಯ럊鲎ęŠęŤęŤęšéąëŠëëëšëłëżąę˛éľéąęŤŚëŠë˝ëರ NCC Warning Message Ńťß⢴䰨âä¨áąáä°¨ážă⤳äâ ăॎΚáˇăಸáźăžşäśŕ¤ľáľŠÍ¸Ńťß⢴áąäľ¨ä°¨ážĺä˛ăă˝ŕ¤ĺâŤÚâŹŕ¤ĽČ ੳăŽáŇŹâŠă˛ŕą´Ěşá᧲ăäˇá°Ąäľ¨â˘´Č ß ŕšß⢴áäˇá°ĄŕŁă˝ăźľÍ¸âŚá࣡ßăŞČĄ ăॎŕ°áˇŃťß⢴áąäľ¨ä°¨ážÍ¸ŇŹâŠĚşááä´Źä¸ăáśâŤŕŁˇÚâŹáᨍाâäÔĺ ă⎊⤍ᰜáᨍ⤍äáŻĺáśáŠŚŕŞąă â áᨍáŻáŤŚáăŠăšŇŹâŠČĄâŤÝşâŹä´˛ŕ¤ľâäÔĺá ´Óä°¨ÔâăşźáŇáşÍ¸âăä°¨äÔČĄŃťß⢴áąäľ¨ä°¨ážä´ľáşŕ¤ŕ¤ľâ äÔáááşČ âťžáĽŕŁˇäâŻâŠä°¨âä¨áąáä°¨ážă˝âŤ×âŹÍ¸áᨍȥ DJI incorporates HDMITM technology. 5IFUFSNT)%.*BOE)%.*)JHI%FmOJUJPO.VMUJNFEJB*OUFSGBDF BOEUIF)%.*-PHPBSFUSBEFNBSLTPSSFHJTUFSFEUSBEFNBSLTPG)%.*-JDFOTJOH--$JOUIF United States and other countries. Š 2016 DJI. All Rights Reserved. 63 Appendix IC Radiation Exposure Statement: DJI Support http://www.dji.com/support Appendix This content is subject to change. Download the latest version from KWWSZZZGMLFRPSURGXFWSKDQWRP If you have any questions about this document, please contact DJI by sending a message to 'RF6XSSRUW#GMLFRP. PHANTOMTM is a trademark of DJI. Copyright Š 2016 DJI All Rights Reserved.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : daniel Create Date : 2017:06:05 11:01:48-07:00 Modify Date : 2017:06:05 11:05:46-07:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2017:06:05 11:05:46-07:00 Creator Tool : Adobe InDesign CC (Macintosh) Format : application/pdf Title : User Manual-5.pdf Creator : daniel Document ID : uuid:c0bc2a15-a915-45e9-b020-12b3dd5dff0b Instance ID : uuid:22345a84-029b-41cf-80cc-51f76c56d6d2 Producer : Acrobat Distiller 10.1.16 (Windows) Page Count : 28EXIF Metadata provided by EXIF.tools