SZ PGST PG-103 Alarm Host User Manual

SZ PGST CO., LTD Alarm Host

User manual

Download: SZ PGST PG-103 Alarm Host User Manual
Mirror Download [FCC.gov]SZ PGST PG-103 Alarm Host User Manual
Document ID3653788
Application ID5SeopXpdrpgp5ofHu/GeqA==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize429.45kB (5368076 bits)
Date Submitted2017-11-27 00:00:00
Date Available2017-11-27 00:00:00
Creation Date2017-06-19 17:21:25
Producing SoftwareCorel PDF Engine Version 14.0.0.701
Document Lastmod2017-09-19 14:51:38
Document TitleBackup_of_pg-103英文公司标准说明书v1.0_20170505
Document CreatorCorelDRAW
Document Author: Administrator

GSM
&i
il
m y
User aM
nual
WIFI+GSM/3G+GPRS
Android App Store
Scan QR code here
download and install APP
CONTENT
Content
Overall state
1~2
Explanation
Features
Identification for daily operation
Alarm host appearance and accessories
3~7
Top view
Bottom view
Side view
Keys of side face
Main interface
Description for main interface
Menu structure
6~7
Initial usage
Start
System initialization
Menu operation
Phone number setup
Add/Delete remote control
Add/Delete wireless detector(included doorbell alarm)
Add/Delete RFID card
10
Synchronization with external wireless siren
10
Record
11
Timer
11
Mobile phone APP
12~18
Install
12
APP configuration with alarm host
12
Unbind mobile phone APP with alarm host
13
Add remote control via APP
13
Add detector via APP
14~15
Delete remote control via APP
16
Delete detector via APP
17
OVERALL STATE
CONTENT
Overall state
Synchronize external wireless siren via APP
17
Inquire/set parameter: Set function switch, Set alarm phone,
Set delay alarm
18
Remote SMS
19~21
Explanation
For all the issues stated in this manual:
Parameter setup
19
Alarm host name setup
19
Parameter inquiry
20
Inquire system setting
20
Inquire system setting2
20
Alarm phone setup inquiry
21
Delay setup inquiry
21
Switch setup inquiry
21
Remote control/detector/RFID card inquiry
21
Phone function
22
Daily operation
23~25
Out Arm
23
Stay Arm
24
Disarm
24
SOS
25
SMS notification feedback
25
Alarm and remote monitoring
26~27
SMS alarm
26
Voice alarm and remote monitoring
26
Automatic dialing preset phone number when the alarm host alarms
26
Preset phone number to call alarm host
26
Alarm receiving procedure via APP
26
Receiving alarm by Intranet monitoring center
27
Specification
28
Packing list
29
The icon is only valid for the corresponding alarm host which is configured
with WiFi module.
The icon is only valid for the user who has applied alarm service from local
intranet alarm center.
Features
2.4 inch TFT display screen, concise user interface and menu hint design.
Main interface status bar, date/clock indication, fairly obvious alarm host status.
Built-in powerful performance CPU master based on 32-bit Cortex-M3 core.
Based on uCOS - III operating system with multitasking design, great user
operation experience.
WIFI/GSM/3G/GPRS intranet alarm system, support different alarm channels,
like APP push/SMS/voice monitoring/intranet center etc. to ensure the alarm
performance stable and reliable.
Support SMS arm/disarm and voice arm/disarm
Support up to 100 learing/storage location for remote control, RFID cards and
wireless detector.
Support many defense zones, such as gate, SOS, bedroom, window, balcony,
perimeter, smoke, gas, carbon monoxide, water leaking, etc.
Support the main power malfunction, backup power shortage, tamper alarm and
other extended alarm.
Support entry/exit zone, indoor zone, perimeter zone, 24-hour zone..etc.
Up to 5 groups preset alarm phone numbers, SMS on/off and dial on/off can be set
respectively.
Support external wireless siren.
Support timing arm and disarm
Can store and inquire daily operation records and alarm records.
GSM network clock synchronization, to ensure accurate clock, and support
country time zone setting.
Support multi-language menu display, voice prompts and alarm SMS setting.
Can record 20 seconds voice message and alarm voice.
Telephone function, support 5 groups re-dial number.
User-friendly APP operation experience and user interface.
Push Arm/disarm message to APP
Support APP remote arm/disarm, parameter setting and accessory management.
Online GPRS to obtain equipment status, automatic alarm when offline.
Reserved remote GPRS TCP / UDP protocol channel, compatible with multiple
alarm center networking protocol to facilitate network alarm.
Center remote control.
OVERALL STATE
Identification for daily operation
Arm
set security task (i.e. Anti-burglar), make the host into alert state, also known as
Arming, Alert or Booting. Designate security guard mission(i.e. Anti burglar), set
the alarm host into on-guard status, also called Arming , Alert or Power on.
ALARM HOST APPEARANCE AND ACCESSORIES
Alarm host appearance and accessories
Top view
TFT display screen
Dial key
Stay Arm
In case the user is at home, only set alert to entrance/exit or perimeter, also
called home alert.
Previous/Function
key
Disarm
Withdraw security task(i.e. Anti-burglar), also called Withdraw alert or Power off.
Next/Backspace
key
Trigger
Under Arm state, detector detects someone or door is opened, it will trigger the
detectors and make alarms.
Return/Cancel key
Exit delay
After setting the host to be Arm state, in order to avoid making alarms for the
users leaving and passing the Arm zones, delay the alarm time.
Entrance delay
ARM/ *
Enter Key
DISARM/ #
Arm key
Stay arm key
When user comes back and pass the Arm zones, the host will not immediately
make alarms. It will allow user to Disarm the host with some time; the host will
make alarms if time out beyond the Disarm.
Disarm key
SOS key
Alarm
When the host create alarm action, acousto -optical alarm signal arises. The host
will send SMS message to the preset mobile phone, dial the preset user
telephone number, create push to mobile phone APP, or send alarm information
to intranet security center.
Bottom view
Anti-tamper switch
ALARM HOST APPEARANCE AND ACCESSORIES
ALARM HOST APPEARANCE AND ACCESSORIES
Side view
Description for main interface
No SIM card
GPRS networking indication
Power on/off/Initialization key
GSM signal
Microphone
GSM signal indication
Power jack
Status bar
Gray color means no signal, 1-5 level stands for GSM signal strength
Wired siren jack
SIM card slot
WiFi
wireless
network
GSM
task status
Keyboard status
Power status
1-5 level stands for WiFi signal
strength,Gray color means no signal
Device already connected to cloud.
The white dot on right corner means
the binding mobile phone is online.
Sending SMS
Dialing
Keyboard is locked. There is 5- seconds countdown hint.
Powered by main power
Powered by back up battery, 0-3 level stands for remaining battery capacity.
Key of side face
Function
Description
Power on
Press this key, “Welcome” appears in the screen,
it means power on.
Power off
Press and hold this key for 3 seconds to power off.
Initialization
Press this key for 5 times to initialize parameters
08:45
Main status zone
Exit delay status. After armed, the user should
leave the site before countdown time ends. When
countdown time ends, it enters into arm mode.
Delay status
of
clock panel
Please exit
Please disarm
10
Entry delay status . The user should disarm after
entrance into the site before countdown time ends.
If the user don’t disarm, it will trigger alarm when
countdown time ends.
Arm
10
Arm/Disarm
status
Stay arm
08:45
Current time
Clock panel shows current time
Main interface
Time
Disarm
No alarm
11
11
On alarm
12
Date
12
2016-12-28 Wednesday
Keyboard quick hint
Alarm status
Current date
Call
ARM/ *
13
Keypad
Arm/Stay arm key
SOS key
DISARM/ #
Disarm key
Menu key
13
ALARM HOST APPEARANCE AND ACCESSORIES
ALARM HOST APPEARANCE AND ACCESSORIES
Menu structure
Set Exit delay,refer to “Identification for daily operation”
Alarm Log
Exit Delay
Set Entry delay,refer to “Identification for daily operation”
Arm Log
Entry Delay
Add Remoter
Set siren duration
Siren Duration
Unit:minute,Range:0~65535,Default: 3 minutes
Set arm beep
Arm Beep
Parts
Select: On/Off, Default: On
Set Arm/Disarm SMS
Setting
Arm SMS
Select: On/Off,Default: Off
Set keypad backlight to be on or off
Select: On/Off,Default: Off
Main menu
MENU
Backlight
WiFi
Range: 0000-9999, 4 digits, default: 6666
Set user password
简体中文
Range: 0000-9999, 4 digits, default: 1234
Simplified Chinese(Default)
English
Language
Record
User
Deutsch
Phone
Learning new wireless detector
Del Detector
Delete all wireless detectors
Add RFID
Learning new RFID card
Del RFID
Delete all RFID cards
Send 1-second wireless learning
signal to external wireless siren.
Airlink
Set alarm host into wireless
network configuration(via APP)
Unbind
Unbind alarm host with mobile
phone APP
Record
Play current recorded voice
Delete
Timer
Restart alarm host
2nd Phone
Set 2nd phone number, Dial on/off, SMS on/off
3rd Phone
Set 3rd phone number, Dial on/off, SMS on/off
4th Phone
Set 4th phone number, Dial on/off, SMS on/off
5th Phone
Set 5th phone number, Dial on/off, SMS on/off
Refer to
“Phone number
setup”
Refer to
“Add/Delete
wireless
detector”
Refer to
“Add/Delete
RFID card”
Refer to
“Synchronization
with external
wireless siren”
Refer to
“unbind mobile
phone APP
with alarm host”
Refer to
“Voice record”
Delete current recorded voice
Set daily arm time and switch on/off
Set system Initialization, refer to “Initialization”
Set 1st phone number, Dial on/off, SMS on/off
Refer to
“Add/Delete
remote control”
Record and playback
Play
Arm Timer
Version
Reset
1st Phone
Add Detector
Siren Learn
Set system password
System
Password
Delete all remote control
Select: On/Off,Default: Off
Set keypad to be locked or not
Keypad Lock
Learning new remote control
Del Remoter
Select: On/Off, Default: Off
Set Siren
Siren
Initialization
Inquire arm/disarm log history
Unit: second,Range:0~65535,Default: 30 seconds
Delay
Switch
Inquire alarm log history
Log
Unit: second,Range:0~65535,Default: 40 seconds
Refer to
“Clock/Timing”
Disarm Timer
Set daily disarm time and switch on/off
Zone & Sync
Set the country or region’s standard Greenwich time
difference, which is synchronous to internet time.
Default time zone: +08:00.
Inquire firmware version, serial number, server.
* Note: 1. When the main keyboard is unlocked, if the user does not do any action or directly
press
Key, then the keyboard is locked. After the keyboard is locked, the user
needs to input password before using the keyboard.
2. When keyboard backlight is off, if the user does not do any action under main interface,
or directly press
key, then the backlight is off to save power.
3. When certain language is selected, then the operation voice reminder, display and
alarm SMS all are converted to this language. The alarm host will restart when
language selection is confirmed.
INITIAL USAGE
INITIAL USAGE
Operation Keyboard: Main Menu  Phone 1st Phone, enter into phone
number setup menu.
Initial usage
Press to select Number, input the alarm number (up to 18 digits),
and press to backspace in case of error
Press to select Dial, press
to select On or Off.If "On" is selected,
the panel will dial the alarm number when an alarm occurs.
Press to select
SMS, press to select On or Off.If "On" is
selected, the alarm host will send SMS to this phone when an alarm
occurs.
Start
Insert SIM card: According to below diagram, insert MICRO SIM card. When a
ticking voice is heard, it means the SIM card is inserted properly.
Press
to confirm, the alarm host will display "Setting OK".
Add/Delete remote control
Add
Power on :Plug power adaptor into USB 5V jack to turn on power.
Turn on the alarm host:Press Power On/Off key, a “welcome” window appears,
then the alarm host is turned on.
Turn off the alarm host:Press and hold Power On/Off key for 3 seconds until
the screen is off, then the alarm host is turned off.
System initialization
Continuously press Power On/Off key for 5 times, the alarm host will restart, then
system initialization is finished. After system initialization, all the data including
remote control, wireless detector, RFID card, language and time zone and other
setting are reset to factory default all .
IP address is cleared and the alarm host is
offline GPRS. The IP address needs to be set again to assure the alarm host to go
online and connect with intranet center.
Please be cautious to use this function. Normally it is only used when user forgets password,
or alarm host malfunction, or the parameter is wrongly set, or unknown detector, remote
control or RFID card are learnt.
Delete
Operation Keyboard: Main Menu
Parts
Del Remoter
Enter.
The alarm host displays “Delete Remoter all”, meanwhile all stored remote
control’s number is displayed in the dialog window.
Press
to confirm, the alarm host displays “Operation OK”, all remote control
is deleted.
Add/Delete wireless detector(included doorbell alarm)
Menu operation
Add
Description for operation keys
Press Previous and Next key to select menu。
Press Return key to last menu。
Press Enter key to next menu。
Operation keyboard: Main Menu
Parts
Add Detector
It enters into “Set Name and Mode” dialog window
1. When
is used as backspace key, long press
to delete all input information.
2. For the other function which is not mentioned in this paragraph, please refer to the
description in the “Menu Structure”.
3. Some operation in this paragraph like phone number setup, add/delete remote control,
add/delete wireless detector and Synchronization with external wireless siren also can
be realized via APP.
Phone number setup
The host can set up to maximum 5 groups of alarm numbers, each set of numbers
can be set independently of their dial-up switch and SMS switch.
Take example as phone number 1:
Operation Keyboard: Main Menu
Parts Add Remoter Enter.
The alarm host displays "Synchronize" and enters into the 20- seconds
countdown dialog window waiting for the remote control synchronization.
Press any key of the remote control to send signal to the alarm host.
The alarm host displays "Learning OK" , then the remote control is
successfully added.
If the alarm host displays “Device code has been learnt”, it means this remote
control is already added to this alarm host, please use other remote control to
try again.
Enter
Press
to select
Name, and press
to select the corresponding
name of the zone where the wireless detector is to be added.
Press
to select , and then press to select the mode of zone
where the wireless detector is located.
Select "Stay armed Active" , When the alarm host is armed or Stay
armed, the detector will always alarm if triggered,. Suggest to set this
mode of detector in the main door, window, balcony, perimeter area.
Select "Out Armed Active", when the alarm host is Out armed, the
detector will not alarm if triggered. Suggest to set this type of detector
in hall, bedroom area.
Select "24 hours Active" , the host will alarm at any time once
triggered. Suggest emergency, smoke, gas, carbon monoxide, water
leaks and other detectors to be set to this mode.
Selecting "Close" , the alarm host will not alarm at any time if
triggered.
For doorbell, please select “Doorbell” , then a tinkling sound arises
from the alarm host whenever the doorbell is pressed.
INITIAL USAGE
Press confirm The alarm host displays "Synchronize" and enters into the
20- seconds countdown dialog window waiting for the wireless detector
synchronization.
Trigger the wireless detector to launch wireless signal to the alarm host.
The alarm host displays "Learning OK", then the wireless detector is
successfully added.
If the alarm host displays “Device code has been learnt”, it means this
wireless detector is already added to this alarm host , please use other
wireless detector to try again.
Delete
Operation keyboard: Main Menu
Parts Delete Detector
Enter
The alarm host displays “Delete detector all”, meanwhile all stored detector’s
number is displayed in the dialog window.
Press to confirm, the alarm host displays “Operation OK”, all wireless
detector and doorbell are deleted.
Add/Delete RFID card
Add
Operation keyboard: Main Menu
Parts Add RFID Enter
The alarm host displays "Synchronize" and enters into the 20- seconds
countdown dialog window waiting for the RFID card synchronization. Put the
RFID card close to the sensitive area on the down-right corner of the alarm
host.
The alarm host displays "Learning OK", then the RFID card is successfully
added.
If the alarm host displays “Device code has been learnt”, it means this RFID
card is already added to this alarm host.
INITIAL USAGE
Record
Record alarm voice
The user can record 20-seconds voice. If alarm occurs, the alarm host will dial
preset phone number and play this record alarm voice.
Operation keyboard: Main Menu
Record Record and Play
At first the alarm host will display “Busy and waiting please”, when it changes
to “Recording”, it means start to record voice.
After recording is finished, the alarm host displays “Playing”and starts
automatic playback.
After playback is finished, press to save. The alarm host displays “Please
wait saving”. After a few seconds, “Setting OK”appears, then recorded voice is
saved.
Timer
The users can set automatic arm/disarm time according to their own routine time,
avoiding repeated operation or missed arm/disarm.
Arm Timer
Operation keyboard: Main Menu
Timer
Arm Timer
Press
to select
Timer, then press the backspace key to delete
the original time.
Input the 4-digit scheduled arm time (Hour: Minute).
Press
to select Switch, and press to select "On/Off".
Press
to confirm, the alarm host displays "Setting OK" to complete
the setting.
Delete
Operation keyboard: Main Menu
Parts Del RFID
Enter
The alarm host displays “Delete RFID all”, meanwhile all stored RFID card’s
number is displayed in the dialog window.
Press to confirm, the alarm host displays “Setting OK”, all RFID cards are
deleted.
Synchronization with external wireless siren
Disarm Timer
Operation keyboard: Main Menu
Timer
Disarm Timer
Press
to select
Timer, then press the backspace key to delete
the original time.
Input the 4-digit scheduled disarm time (Hour: Minute).
Press
to select Switch, and press to select "On/Off".
Press
to confirm, the alarm host displays "Setting OK" to complete
the setting.
This operation instruction is subject to our company model PE-519 wireless siren.
Operation keyboard: Main Menu
Parts Siren Learn Enter
Press and hold the Set button on the siren until 2 sound is heard. The siren’s
indicator will flash quickly, then it enters into synchronization status.
Press
to confir m, the alarm host displays “Learn Signal Sent” and send
wireless signal to the siren.
A long and a short sound arise from the siren, which means successful
synchronization.
10
After the wireless siren is synchronized with the alarm host, if the alarm host triggers alarm,
alarm sound will arises from the siren at the same time.
11
MOBILE PHONE APP
MOBILE PHONE APP
Mobile phone APP
The concerned APP description is based on Andriod system, some description may
differs due to APP version or iOS system. All description is subject to installed APP
in mobile phone.
Install
Using mobile phone’s browser to scan QR code, then download the APP and install.
APP configuration with alarm host
Ensure the alarm host and mobile phone to be in the same WiFi network.
Run APP software, and login at the user login interface (new user is required to
register ID at first).
In “Device List” interface, press “Airlink” button on top right corner to enter into
the intelligent configuration interface.
Operate alarm host: Main Menu
WiFi
Airlink
Enter, the alarm host
displays “Airlinking”, and enters into the 60- seconds countdown waiting
interface.
Select WiFi network listed in the APP and input password, press “OK” to start
configuration.
The alarm host displays “Airlink OK” to complete configuration. The MAC
address of the alarm host will appear in the APP “Device List”. One mobile
phone can be configured with several alarm hosts. Select the corresponding
MAC address of the alarm host, then the mobile can control the alarm host.
Operate alarm host: Main Menu
WiFi Unbind Enter, the alarm host
displays “Unbinding”.
Waiting for 10-20 seconds, the alarm host unbinds with mobile phone
automatically. After unbinding, the mobile phone can not control the alarm host
until being configured again.
Add remote control via APP
Refer to below diagram:
Unbind mobile phone APP with alarm host
Enter into “System Settings” menu .
Select “Remote Setting”, all remote controll is listed in this interface.
Select “Add Devices” .
Select “Start to learn” .
Press any key in the remote control, the alarm host will send successful
information to APP, then learning is completed.
“Learn OK” appears in APP.
Return to “Remote Setting” to add more remote control.
Refer to below diagram:
12
13
MOBILE PHONE APP
MOBILE PHONE APP
Number of
learnt remote
control
Add detector via APP
Enter into “System Settings” menu .
Select “ Detector Setting”, all detectors are listed in this interface.
Select “Add Devices”.
Press “Detector Name” to select the added detector name.
Press “Zone Mode” to select the arm mode.
Select “Start to learn”.
The alarm host will send successful information to APP, the learning is
completed.
“Learn OK” appears in APP.
Return to “Detector Setting” to add more detectors.
14
15
MOBILE PHONE APP
MOBILE PHONE APP
Delete detector via APP
Enter into “Detector Setting” menu, press “
”icon which you wan to delete .
A window “Delete Detectors named....appears, click “OK” to finish deletion.
APP returns to “Detector Setting” menu, the deleted detectors will not be listed
in this interface.
Refer to below diagram:
Number of
learnt detector
Delete remote control via APP
Enter into “ Remote Setting ” and press “
” icon.
Click “ OK ” to finish deletion in “ Delete remote controller all ? ” popup window .
APP returns to “ Remote Setting ” menu, then remote number will be zero.
Refer to below diagram:
Synchronize external wireless siren via APP
This operation is only to send synchronization signal via APP to external wireless
siren which is being learnt. Refer to “Synchronization with external wireless
siren”.
Enter into “system settings”, and select “Wireless Siren Setting” .
Click “Trigger”, APP will send wireless signal to the alarm host.
“Trigger OK” appears, the synchronization is finished.
Refer to below diagram:
If number is 0,
it means delete
successfully
16
17
REMOTE SMS MESSAGE
MOBILE PHONE APP
Inquire/set parameter: Set function switch; Set alarm
phone; Set delay alarm
Enter into System Setting
Switch Setting, there are 3 options(Arming beep,
Alarm beep, Arm/disarm SMS) to select On/Off accordingly.
Enter into System Setting
Alarm Phone Setting, click “
phone calling function when alarming, click “
when alarming.
Enter into System Setting
Parameter setup
The user is required to edit SMS message according to below format, and send the
SMS message to SIM card in the alarm host.
” icon to activate
” icon to activate SMS function
Entry Delay Setting, to select the delay time in the
time roll. The unit is second.
Remote SMS
* Engineer Password*
Content
Address
Content
One SMS message can includes one or more address or content, but it must be
separated by * and the first and last data must be *. The address should be founded
of 2 digits. One SMS content can include maximum 160 bits. It is suggested to put all
contents in one SMS.
Address
Refer to below diagram:
Address
Function
Contents and Limit
Factory Default
Times of redial
1~255 times
Once
Times of auto answering ring
1~255 times
Once(reserved)
Revise user password
0000~9999 4 digits
Revise system password
0000~9999 4 digits
Initialization
Empty, refer to Note 1
Set alarm phone 1
Refer to Note 2
Off
Set alarm phone 2
Refer to Note 2
Off
Set alarm phone 3
Refer to Note 2
Off
Set alarm phone 4
Refer to Note 2
Off
Set alarm phone 5
Refer to Note 2
Off
Inquire GSM signal strength
Empty
Set GPRS server IP address
This operation is only
valid for online GPRS.
Refer to Not 3
Set GPRS APN
This operation is only
valid for online GPRS.
Refer to Not 4
Set NTP IP
Refer to Note 5
Set Greenwich time zone
Refer to Note 5
Empty
Note: Below examples are based on default system password 6666
1.Initialization: All learnt remote control, wireless detector and RFID card are
remained, the other parameter is reset to factory default.
Set SMS contents: *6666*43*
2.Format of alarm phone number : xxxxxxxxxxx,A,B
XXXXXX is phone number(Max. 18 digits), A is calling alarm switch(1-on,
0-off). B is SMS alarm switch(1-on, 0-off) .
18
19
REMOTE SMS MESSAGE
REMOTE SMS MESSAGE
Example: Set 2 alarm phone numbers as 13912345678 and 075581234567.
13912345678 is used to receive calling and SMS alarm, 075581234567
is used to receive calling alarm, then please set SMS contents
according to below format:
*6666*5113912345678,1,1*52075581234567,1,0*
3、Format of IP address: :aaa,bbb,ccc,ddd,xxxxx
aaa,bbb,ccc,ddd is IP address, xxxxx is the port, separated with comma.
Example: Set GPRS server IP address as 116.62.42.223, port is 2001,
then please set SMS contents according to below format:
* 6666*90116,62,42,223,2001*
4、Set GPRS APN
Example: The local GPRS APN is internet.beeline.kz, then please set
SMS contents according to below format:
* 6666*92internet.beeline.kz*
5、Set Greenwich time zone:Set auto synchronization between alarm host
clock and internet time. Time difference zone range : -12.0~13.0
Alarm host name setup
The user can set a name for the alarm host which is used as the prefix of SMS phone
number. This helps to recognize the alarm host or specific alarm location.
Example: SMS 1234@ XX Building a Block , 1234 is password, @ is command,
XX Building a Block is the name(Max.40 bits)
Parameter inquiry
All feedback SMS contents are written in English, please inquire according to below
description.
Inquire system setting
SMS format:*6666*62*,Alarm host feedback SMS:
SYSTEM set:
SN:
LANGUAGE:
ENGINEER PASSWORD:
USER PASSWORD:
GSM CSQ:
WIFI RSSI:
Alarm host serial number
Alarm host language
Engineer password
User password
GSM signal strength
(0 or 99 means abnormal strength)
WiFi signal strength
Alarm phone setup inquiry
SMS format:*6666*51*,Alarm host feedback SMS:
PHONE set:
1:
1st alarm phone number, voice alarm switch, SMS alarm switch, general switch
2:
2nd alarm phone number, voice alarm switch, SMS alarm switch, general switch
3:
3rd alarm phone number, voice alarm switch, SMS alarm switch, general switch
4:
4th alarm phone number, voice alarm switch, SMS alarm switch, general switch
5:
5th alarm phone number, voice alarm switch, SMS alarm switch, general switch
REDIAL COUNTER:Redial times of voice alarm
Delay setup inquiry
SMS format:*6666*33*,Alarm host feedback SMS:
DELAY set:
ENTRY:
Entry delay(unit: second)
EXIT:
Exit delay(unit: second)
SIREN:
Siren duration(unit: minute)
Switch setup inquiry
SMS format:*6666*46*,Alarm host feedback SMS:
SWITCH set:
ARM/DISARM BEEP:
ALARM BEEP:
ARM/DISARM SMS:
Arm/Disarm switching beep(1:on, 0:off)
Siren alarm beep(1:on, 0:off)
Arm/Disarm SMS switch(1:on, 0:off)
Remote control/detector/RFID card inquiry
SMS format:*6666*26*,Alarm host feedback SMS:
DETECTOR learned:
REMOTE:
DETECTOR:
RFID:
Number of remote control
Number of detector
Number of RFID card
Inquire system setting2
SMS format:*6666*90*,Alarm host feedback SMS:
SYSTEM set2:
APN:
GPRS IP:
NTP:
TIME ZONE:
SERVER :
20
GPRS name
GPRS server IP address and port
Internet time server domain
GMT standard time zone
Current WiFi server
21
PHONE FUNCTION
DAILY OPERATION
Phone function
Daily operation
In Main Interface, press
key to make calling.
Please operate according to the hint in this interface.
 Remote control, Keyboard, RFID card.
The user can control the alarm host by any of following ways:
 Remote SMS.

Mobile phone APP.

GPRS alarm center.
Out Arm
10086
10086
By remote control: press 【 】key to activate Out Arm.
By keyboard: In Main Interface, press * to activate Out Arm.
By RFID card: In Disarm mode, put the RFID card close to the sensitive area on
bottom right corner of the alarm host.
By remote SMS: Send SMS message 1234#1(1234 is user password) at first, then
the alarm host will feedback “System Armed! ” SMS to mobile phone to confirm.
By APP: In Main Menu, select “ ” icon, then select delay arm time(exit delay).
After around 3 seconds, Out Arm mode is completed.
The alarm host reminder: A reminding voice “System armed” will be heard, the
Main Interface displays “Armed” and “Please exit”, and an exit time progress bar
appears. The user should leave the alarm zone before exit time. If Arm/Disarm SMS
ARM/
In case of following condition, No GSM network, in Arm mode, on alarm, making a call
is forbidden.
switch is on,the preset phone will receive “Sytem Armed !”SMS.
Under Out Arm mode, all defense zones are on alert status. If any defense zone is
triggered, the alarm host will generate a local siren alarm, and send alarm SMS or make
calling to the preset phone numbers , simultaneously send the alarm message to mobile
phone APP or GPRS alarm center.
Refer to below diagram:
Cancel
OK
On-time status
of alarm host
22
23
DAILY OPERATION
DAILY OPERATION
Stay Arm
By remote control: Press key to activate Stay Arm.
By keyboard: In Main Interface, press * key for twice to activate Stay Arm.
By APP: In Main Menu, select “ ” icon. After around 3 seconds, Stay Arm mode is
completed.
The alarm host reminder: A reminding voice “System armed” will be heard, the Main
Interface displays “Stay Armed”. If Arm/Disarm SMS switch is on,the preset phone
ARM/
will receive “System Stay Armed! ”SMS.
Under Stay Arm mode, only valid Stay Arm defense zones are on alert status. If any defense
zone is triggered, the alarm host will generate a local siren alarm, and send alarm SMS or
make calling to the preset phone numbers , simultaneously send the alarm message to
mobile phone APP or GPRS alarm center.
Refer to below diagram:
On-time status
of alarm host
SOS
By remote control: Press SOS key to activate SOS.
to activate Disarm
By keyboard: In Main Interface, press
By APP: In Main Menu, select “ SOS ” icon.
The alarm host reminde: The Main Interface displays “Help”. The alarm host will
generate a local siren alarm, and send alarm SMS or make calling to the preset
phone numbers , simultaneously send the alarm message to mobile phone APP or
GPRS alarm center.
Refer to below diagram:
On-time status
of alarm host
Disarm
By remote control: Press key to activate Disarm
to activate Disarm
By keyboard: In Main Interface, press
By RFID card: In Arm/Stay arm mode, put the RFID card close to the sensitive area
on bottom right corner of the alarm host.
By remote SMS: Send SMS message 1234#2(1234 is user password) at first, then
DISARM/ #
the alarm host will feedback “System Disarmed!“ SMS to mobile phone to
confirm.
By APP: In Main Menu, select “ ” icon. After around 3 seconds, Disarm mode is
completed.
The alarm host reminder: A reminding voice “System Disarmed” will be heard, the
Main Interface displays “Disarmed”. If Arm/Disarm SMS switch is on,the preset
phone will receive “System Disarmed!”SMS.
Under Disarm mode, all the alarm procedure will be terminated.
Refer to below diagram:
24
On-time status
of alarm host
SMS notification feedback
:
Remote operation result
25
ALARM AND REMOTE MONITORING
ALARM AND REMOTE MONITORING
Alarm and remote monitoring
Refer to below diagram:
The alarm host supports diverse alarm types. When alarm is triggered, it will send
alarm SMS to the user’s mobile phone and push alarm message to APP,
simultaneously send alarm message to GPRS alarm center and make calling to the
user, then the user can do on-time monitoring and remote operation.
The alarm host also support following alarm types,
The main power malfunction(when main power malfunction lasts for 5 seconds,
the alarm is activated)
 Back up battery shortage(In case of main power malfunction, when back up
battery’s voltage is lower than 3.45V and lasts for 10 seconds, the alarm is
activated)
 Main power recovers.
Anti-tamper alarm(When the mounting bracket is separated with the alarm host,
the alarm is activated).

SMS alarm
When any alarm is triggered, the alarm host will send SMS to preset phone numbers
as following contents:
:
Current alarm
Voice alarm and remote monitoring
Automatic dialing preset phone number when the
alarm host alarms
When any alarm is triggered, the alarm host will automatically dial preset phone
numbers(make sure the dial switch is on). After the user ringed, the alarm host will
play current alarm type at first. If there is a preset voice, this voice will be played.
Then the user will hear reminding voice “Press 1 to arm, press 2 to disarm, press 3
to monitor, press 4 to talk ” . If it is mistake alarm, the user can press “2” to activate
Disarm. The user also can press “3” or “4” to turn off the alarm sound for better
monitoring. If monitoring is unnecessary, just quit calling.
If the user does not answer the call or failed calling, the alarm host will constantly
dial the preset phone number according to the preset redial times until the user
answers the call.
Receiving alarm by Intranet monitoring center
When any alarm is triggered, the alarm host will send alarm message to GPRS
alarm center. The alarm center can handle the alarm quickly after receiving and
confirming the alarm message.
The function is only valid when the IP address is correctly set. Proper APN setting is
required for foreign countries. Please refer to “SMS parameter setup” for details.
Preset phone number to call alarm host
If the preset phone number voluntarily calls the alarm host, the alarm host will
automatically answer the call, then the user can do on-time monitoring and remote
operation.
Alarm receiving procedure via APP
When any alarm is triggered, the alarm host will push alarm message to mobile
phone at first. Open APP and enter into main menu, the user can see a red alarm
icon in the middle status bar and the current alarm type. The user can select “Alarm
Log” icon to inquire all operation record and alarm log.
26
27
PACKING LIST
TECHNICAL PARAMETER
Specification
Packing List
Input voltage: DC5V(micro USB jack)
Alarm host x1
Working current: <120mA
Micro USB 5V/1000mA Power adapter x1
Standby current:<80uA
Wireless PIR detector x1
Siren output:<500mA
Door sensor x1
Wireless frequency: 433MHz
Remote control x2
Wireless coding: EV 1527
RFID card x2
GSM bands: 850/900/1800/1900MHz
Wired siren x1
WiFi standard: IEEE802.11b/g/n wireless standard
Back up battery: 3.7V/300mAh lithium battery
Working temperature: :0~55℃
Relative humidity: < 80%RH (No freezing)
Product dimension:185x125x14.7MM(LxHxT)
28
29
Date: Mar.4th,2017
品
PG-103
PG-103公司标准英文说明书V1.0
Belinda
封面128铜板纸(表面过哑膜)
内页70G双胶纸
号
120*180MM
封 面 封底四 色 CMYK
内 页 单色
1.
Warning
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired operation.
changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit
different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV
technician for help.
NOTE: This device and its antenna(s) must not be
co-located or operation in conjunction with any other
antenna or transmitter.
RF Exposure Statement
To maintain compliance with FCC’s RF Exposure
guidelines, This equipment should be installed and
operated with minimum distance of 10mm the radiator
your body.
This device and its antenna(s) must not be co-located or
operation in conjunction with any other antenna or
transmitter. Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user’s authority to operate the
equipment.
RF Exposure Information:
The SAR limit of USA (FCC) is 1.6W/kg averaged over
one gram of tissue. Device Types (FCC ID: 2AIT9PG-103)
has also been tested against this SAR limit.
The highest SAR value reported under this standard
during product certification for use when properly worn on
the body is 0.622 W/kg .
Simultaneous RF exposure is 0.679W/Kg.
This device was tested for typical body‐worn operations
with the back of thehandset kept 5mm from the body.To
maintain compliance with FCC RF exposure requirements,
use accessories that antain a 0mm separation distance
between the user's body and the back of thehandset.
The use of belt clips, holsters and similar accessories
should not containmetallic components in its assembly.
The use of accessories that do not satisfy
theserequirements may not comply with FCC RF
exposure requirements, and should beavoided.
The use of belt clips, holsters and similar accessories
should not contain metallic components in its assembly.
The use of accessories that do not satisfy these
requirements may not comply with FCC RF exposure
requirements, and should be avoided.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Format                          : application/pdf
Creator                         : Administrator
Title                           : Backup_of_pg-103英文公司标准说明书v1.0_20170505
Create Date                     : 2017:06:19 17:21:25+08:00
Creator Tool                    : CorelDRAW
Modify Date                     : 2017:09:19 14:51:38+08:00
Metadata Date                   : 2017:09:19 14:51:38+08:00
Producer                        : Corel PDF Engine Version 14.0.0.701
Document ID                     : uuid:2da379ad-d676-4b12-acbd-dd2324008596
Instance ID                     : uuid:d0e8d8ef-0e8b-45d0-a7bb-ba592589fdac
Page Count                      : 21
Author                          : Administrator
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AIT9PG-103

Navigation menu