Saeco Coffee Makers Talea Ring Plus Espresso Machine Talearingplus Users Manual User's
TALEARINGPLUS to the manual ce81da39-21a4-42a5-a51e-cc6618d00600
2015-02-02
: Saeco-Coffee-Makers Saeco-Coffee-Makers-Talea-Ring-Plus-Espresso-Machine-Talearingplus-Users-Manual-487608 saeco-coffee-makers-talea-ring-plus-espresso-machine-talearingplus-users-manual-487608 saeco-coffee-makers pdf
Open the PDF directly: View PDF 
.
Page Count: 42
| Download | |
| Open PDF In Browser | View PDF |
y tes es r sp r u co c te o s of Sa le s& Se ce rvi Operation and maintenance manual Before using the machine, please read the attached operating instructions. Carefully read the safety rules Mode d'emploi Veuillez lire attentivement le mode d'emploi (notamment les consignes de sécurité) avant d'utiliser l'appareil. FOR HOUSEHOLD USE ONLY IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following: 1 Read all instructions and information in this instruction book and any other literature included in this carton referring to this product before operating or using this appliance. 2 Do not touch hot surfaces. Use handles or knobs. 3 To protect against fire, electric shock and personal injury do not immerse cord, plugs or appliance in water or other liquid. 4 Close supervision is necessary when any appliance is used by or near children. 5 Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance. 6 Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any way. Return appliance to the nearest authorized service centre for examination, repair or adjustment. 7 The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock or personal injury. 8 Do not use outdoors. 9 Do not let cord hang over edge of table or counter, or touch hot surfaces. 10 Do not place on or near a hot gas or electric burner, or in a heated oven. 11 Always turn appliance “OFF”, then plug cord into the wall outlet. To disconnect, turn switch to “OFF”, then remove plug from wall outlet. 12 Do not use appliance for other than intended household use. 13 Use extreme caution when using hot steam. SAVE THESE INSTRUCTIONS CAUTION This appliance is for household use only. Any servicing, other than cleaning and user maintenance, should be performed by an authorized service centre. Do not immerse machine in water. To reduce the risk of fire or electric shock, do not disassemble the machine. There are no user serviceable parts inside the machine serviceable by the user. Repair should be done by authorized service personnel only. 1 Check voltage to be sure that the voltage indicated on the nameplate corresponds with your voltage. 2 Never use warm or hot water to fill the water tank. Use cold water only. 3 Keep your hands and the cord away from hot parts of the appliance during operation. 4 Never clean with scrubbing powders or harsh cleaners. Simply use a soft cloth dampened with water. 5 For optimal taste of your coffee, use purified or bottled water. Periodic descaling is still recommended every 2-3 months. INSTRUCTIONS FOR THE POWER SUPPLY CORD A A short power-supply cord is provided to reduce risks of tangling or tripping over a longer cord. B Longer extension cords are available and may be used if care is exercised in their use. C If a long extension cord is used: 1 the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance. 2 if the appliance is of the grounded type, the extension cord should be a grounding type 3 the cord should not hang from the table to avoid the risk of tangling or tripping. 2 CONTENTS GENERAL INFORMATION ................................................................................................................... 3 APPLIANCE ......................................................................................................................................... 4 ACCESSORIES ...................................................................................................................................................... 4 INSTALLATION .................................................................................................................................... 5 STARTING THE MACHINE ......................................................................................................................................... 5 SETTING THE LANGUAGE......................................................................................................................................... 6 “AQUA PRIMA” WATER FILTER ................................................................................................................................... 7 DISPLAY .............................................................................................................................................. 8 (OPTI-DOSE) INDICATES THE GROUND COFFEE QUANTITY ............................................................................................... 8 ADJUSTMENTS ................................................................................................................................... 9 COFFEE INTENSITY ................................................................................................................................................ 9 ADJUSTING THE HEIGHT OF THE DRIP TRAY ................................................................................................................. 9 COFFEE GRINDER ADJUSTMENT ................................................................................................................................ 9 BEVERAGE DISPENSING ................................................................................................................. 10 ESPRESSO / COFFEE / LONG COFFEE ...................................................................................................................... 10 DISPENSING BEVERAGES WITH GROUND COFFEE ........................................................................................................ 11 HOT WATER DISPENSING ....................................................................................................................................... 12 DISPENSING STEAM ............................................................................................................................................. 13 MAKING CAPPUCCINO ........................................................................................................................................... 14 MILK ISLAND (OPTIONAL) ...................................................................................................................................... 15 BEVERAGE PROGRAMMING............................................................................................................ 16 1. PROGRAMMING FOR SELF-LEARNING .................................................................................................................... 16 2. PROGRAMMING FROM THE “BEVERAGE SETTINGS” MENU .......................................................................................... 16 PROGRAMMING THE MACHINE....................................................................................................... 18 MACHINE SETTINGS ............................................................................................................................................. 19 “LANGUAGE” MENU.............................................................................................................................................. 19 “WATER HARDNESS” MENU .................................................................................................................................... 20 “ACOUSTIC ALARM” MENU ..................................................................................................................................... 20 “FILTER ALARM” MENU ......................................................................................................................................... 21 “RINSE” MENU .................................................................................................................................................... 21 “CUP WARMING SURFACE” MENU ............................................................................................................................ 21 “CLOCK SETTING” MENU ....................................................................................................................................... 22 MAINTENANCE ................................................................................................................................. 25 “WATER FILTER” MENU ......................................................................................................................................... 25 “DESCALING” MENU ............................................................................................................................................. 27 BREW GROUP WASHING ........................................................................................................................................ 30 PROGRAMMING THE MACHINE....................................................................................................... 31 ENERGY SAVING ................................................................................................................................................. 31 TURN OFF DELAY ................................................................................................................................................ 31 .................................................................................................................................................. 31 “MONDAY” TIMER SETTING .................................................................................................................................... 32 TIMER SETTING SPECIAL FUNCTIONS....................................................................................................................... 33 RESTORE SETTINGS ............................................................................................................................................. 33 CLEANING AND MAINTENANCE ...................................................................................................... 34 GENERAL MACHINE CLEANING ................................................................................................................................ 34 CLEANING THE BREW GROUP. ................................................................................................................................ 35 ERROR CODES................................................................................................................................. 36 TROUBLESHOOTING........................................................................................................................ 37 SAFETY RULES................................................................................................................................. 38 TECHNICAL DATA ............................................................................................................................. 40 3 GENERAL INFORMATION The coffee machine is suitable for preparing espresso coffee using coffee beans, and it is equipped with a device to dispense steam and hot water. The machine is designed for domestic use only, and is not suitable for heavy or professional use. Warning: no liability is assumed for any damage caused by: • incorrect use not in accordance with the intended uses; • repairs not carried out by authorized customer service centres; • tampering with the power cable; • tampering with any part of the machine; • the use of non-original spare parts and accessories; • failure to descale the machine or use at temperatures below 0°C (32°F) IN THESE CASES, THE WARRANTY IS NOT VALID. THE WARNING TRIANGLE INDICATES ALL IMPORTANT INSTRUCTIONS FOR THE USER’S SAFETY. PLEASE FOLLOW THESE INSTRUCTIONS CAREFULLY TO PREVENT SERIOUS INJURIES! HOW TO USE THESE OPERATING INSTRUCTIONS. Keep these operating instructions in a safe place and make them available to anyone else who may use the coffee machine. For further information or in case of problems, please refer to any authorized service centre. 4 APPLIANCE Coffee bean hopper Coffee bean hopper cover Cup warming surface Compartment for preground coffee Control panel Power button SBS knob Service door Dispensing head Dregs drawer 'ULSWUD\JULOODQGÀRDW Hot water / steam knob Button for raising/lowering the drip tray Hot water / steam spout Water tank Brew Group “Milk Island” connection Drip tray Socket for power cable ACCESSORIES “Aqua Prima” ZDWHU¿OWHU Grinder adjustment key Ground coffee measuring scoop Water hardness tester Cleaning brush Power cable INSTALLATION 5 STARTING THE MACHINE Make sure that the main power button is not pressed in the “ON” position. 1 Remove the coffee bean hopper cover. Fill the hopper with coffee beans. 4 Fill the tank with fresh drinking water. Do not exceed the “max” level indicated on the water tank. 2QFH¿OOHGSODFHWKHWDQNEDFNLQWR the machine. 7 Press the main power button to the “ON” position. 2 3 Close the cover pushing it down completely. 5 Remove the water tank. We recommend installing the “Aqua 3ULPD´ZDWHU¿OWHU VHHSDJH 6 Attach the female end of the power cord to the machine. Insert the male end into the power outlet (see data tag). Place a container beneath the hot water spout. The machine automatically primes the water circuit. Water may not be dispensed into the container. The machine is now ready for use. This should not be considered a malfunction. TO ASSESS WATER HARDNESS, SEE “WATER HARDNESS MENU” ON PAGE 20. 6 INSTALLATION SETTING THE LANGUAGE These settings allow you to regulate the machine’s parameters to dispense coffee according to the typical parameters of the country where it is used. For this reason, the languages are also differentiated by location. 1 2 1 Press beverage settings . 3 2 machine settings Select “machine settings” by navigating Press WKHFOLFNZKHHOZLWK\RXU¿QJHU selection. 4 5 2.1 Press selection. language English WRFRQ¿UPWKH 7 language English The machine now displays the messages in the language selected. machine settings WRFRQ¿UPWKH 6 2.1 language English Select by navigating the click ZKHHOZLWK\RXU¿QJHU 8 2.1 2 2.1 language English When the desired language is displayed, press . 9 exit Press until the following message is displayed. exit Press . 10 Wait until the machine completes the heating stage. When the right temperature is reached, the machine performs a rinse cycle in the internal circuits. A small quantity of water is dispensed. Wait for this cycle to be completed automatically. The screen for product dispensing appears on the display. See page 8. 7 “AQUA PRIMA” WATER FILTER To improve the quality of the water you use, and guarantee longer machine life at the same time, it is UHFRPPHQGHGWKDW\RXLQVWDOOWKH³$TXD3ULPD´ZDWHU¿OWHU$IWHULQVWDOODWLRQJRWRWKH¿OWHULQLWLDOL]DWLRQSURJUDP VHHSURJUDPPLQJ ,QWKLVZD\WKHPDFKLQHDGYLVHVWKHXVHUZKHQWKH¿OWHUPXVWEHUHSODFHG 2 1 Remove the “Aqua Prima” water ¿OWHUIURPLWVSDFNDJLQJ(QWHUWKH date of the current month. 4 3 ,QVHUWWKH¿OWHULQLWVSODFHZLWKLQWKH HPSW\WDQN VHH¿JXUH 3UHVVGRZQ until it clicks into place. 5 Fill the tank with fresh drinking ZDWHU/HWWKH¿OWHUVRDNLQWKHIXOO tank for 30 minutes for correct initialization. 6 1 beverage settings 3 maintenance 1. 2. Place a container beneath the steam/hot water spout. 7 Press Select “maintenance” and press the button. . 8 3.1 water filter 9 3.1.3 activate filter execute now 1. 2. Press again. 6HOHFW³ORDG¿OWHU´DQGSUHVVWKH button. position. Turn the knob to the Water dispensing begins.. :KHQWKHPDFKLQHKDV¿QLVKHGWXUQWKHNQREXQWLOLWLVLQWKHUHVWSRVLWLRQ ). Press “exit” message is displayed. Then press . The machine is now ready for use. a few times until the 8 DISPLAY Accessing the programming menu strong aroma espresso coffee 08:33 Steam button Click wheel &RQ¿UPDWLRQEXWWRQ Select the coffee bean dose or the quantity of pre-ground coffee Hot water button • Press the button twice to make 2 cups. 7KLVRSHUDWLRQFDQEHSHUIRUPHGXSXQWLOWKHJULQGLQJRIWKH¿UVWFXSLVFRPSOHWH selected espresso coffee Press twice selected double espresso 7REUHZFXSVWKHPDFKLQHGLVSHQVHVKDOIRIWKHHQWHUHGTXDQWLW\DQGEULHÀ\LQWHUUXSWVGLVSHQVLQJLQ order to grind the second serving of coffee. Coffee dispensing is then restarted and completed. (OPTI-DOSE) INDICATES THE GROUND COFFEE QUANTITY It is possible to choose three options (strong, button. medium and mild) by pressing the These indicate the quantity of coffee the machine grinds for each beverage. This button is also used to select the pre-ground coffee function. SELECT THE AMOUNT OF COFFEE TO BE GROUND BEFORE DISPENSING THE BEVERAGE. strong aroma espresso coffee 08:33 medium aroma espresso coffee 08:33 mild aroma espresso coffee 08:33 pre-ground espresso coffee 08:33 9 ADJUSTMENTS COFFEE INTENSITY The SBS system has been carefully designed to give your coffee the intense taste you desire. Simply turn the dial and you will notice that the coffee goes from mild intensity to strong intensity. MEDIUM COFFEE SBS – SAECO BREWING SYSTEM SBS adjusts the intensity of the brewed coffee. The coffee may even be adjusted while brewing. This adjustment has an immediate effect on the selected type of brewing. MILD COFFEE STRONG COFFEE ADJUSTING THE HEIGHT OF THE DRIP TRAY Adjust the drip tray before dispensing any beverages so as to be able to use any kind of cup. To raise the drip tray, press lightly on the lower part of the button. To lower the drip tray, press lightly on the upper part of the button. When the desired height is reached, release the button. 1RWH 7KHUHLVDUHGÀRDWLQWKHGULSWUD\WRZDUQZKHQLW is necessary to empty the tray. COFFEE GRINDER ADJUSTMENT The machine lets you make slight adjustments to the coffee grinder to adapt it to the kind of coffee used. The adjustment must be performed by pressing the pin located inside the coffee hopper. This must be turned by means of the supplied key only. Turn the pin one notch at a time and brew 2-3 cups of coffee; the grinder adjustment can only be noticed in this way. The references located inside the container indicate the grind setting. FINE GRIND MEDIUM GRIND COARSE GRIND 10 BEVERAGE DISPENSING COFFEE BREWING CAN BE STOPPED AT ANY TIME BY PRESSING THE BUTTON AGAIN. THE STEAM SPOUT MAY REACH HIGH TEMPERATURES: DANGER OF SCALDING. DO NOT TOUCH IT WITH BARE HANDS. Check that all the containers are clean. To carry out this operation, follow the instructions in the “Cleaning and Maintenance” section (see page 34). 7REUHZFXSVWKHPDFKLQHGLVSHQVHVWKH¿UVWFRIIHHDQGEULHÀ\VWRSVGLVSHQVLQJLQRUGHUWRJULQGWKHVHFRQG serving of coffee. Coffee dispensing is then restarted and completed. ESPRESSO / COFFEE / LONG COFFEE This procedure shows how to dispense an espresso. To dispense another type of coffee, select it by navigating WKHFOLFNZKHHOZLWK\RXU¿QJHU8VHDSSURSULDWHHVSUHVVRRUFRIIHHFXSVVRWKDWWKHFRIIHHZLOOQRWRYHUÀRZ 1 3 2 strong aroma espresso coffee 08:33 Position 1 - 2 cup(s) to dispense an espresso 4 Position 1 - 2 cup(s) to dispense a regular coffee or a long coffee Select the desired beverages by navigating the click wheel with \RXU¿QJHU 5 strong aroma espresso coffee 08:33 If desired, select the quantity of coffee to be ground by pressing the button one or more times. strong aroma espresso coffee 08:33 Press the button: once for 1 cup and twice for 2 cups. The machine begins dispensing the selected beverage. The machine ends dispensing automatically on the basis of the quantity determined by the manufacturer. It is possible to customize this quantity (see page 16). 11 DISPENSING BEVERAGES WITH GROUND COFFEE The machine allows you to use pre-ground and decaffeinated coffee. Pre-ground coffee must be poured into the appropriate compartment positioned next to the coffee bean hopper. Only use coffee ground for espresso machines and never coffee beans or instant coffee. WARNING: ONLY PUT PRE-GROUND COFFEE INTO THE COMPARTMENT WHEN YOU WISH TO DISPENSE THIS TYPE OF BEVERAGE. ONLY INSERT ONE SCOOP OF GROUND COFFEE AT A TIME. TWO CUPS OF COFFEE CANNOT BE DISPENSED AT THE SAME TIME. The preparation of an espresso using pre-ground coffee is shown in the example given below. The customized choice of using pre-ground coffee is shown on the display. 1 2 strong aroma espresso coffee 08:33 3 pre-ground espresso coffee 08:33 insert ground coffee and press ok 2. 1. Select the desired beverage by navigating the click wheel with \RXU¿QJHU 4 Select the function by pressing the button until the pre-ground option appears. Press the EXWWRQWRFRQ¿UP A message reminds the user to pour ground coffee into the appropriate compartment. 5 brewing in progress please wait Pour one scoop of ground coffee into the appropriate compartment using the measuring scoop provided. Press the brewing. button to start Note: • If brewing does not start within 30 seconds from the appearance of the message (3), the machine will return to the main menu and discharge any inserted coffee into the coffee grounds drawer; • If no pre-ground coffee is poured into the compartment, only water will be dispensed; • If the dose is excessive or if 2 or more scoops of coffee are added, the machine will not dispense the beverage and the coffee in the compartment will be discharged into the grounds drawer. 12 BEVERAGE DISPENSING HOT WATER DISPENSING DISPENSING MAY BE PRECEDED BY SHORT SPURTS OF HOT WATER AND SCALDING IS POSSIBLE. THE HOT WATER/STEAM SPOUT MAY REACH HIGH TEMPERATURES: DO NOT TOUCH IT WITH BARE HANDS. USE THE APPROPRIATE HANDLE ONLY. 1 2 3 selected hot water Place a container beneath the steam/hot water spout. 4 Press the button. 5 Turn the knob to the position. 6 brewing in progress hot water The display shows “brewing in progress... hot water” 7 To dispense another cup of hot water, repeat this operation. Wait until the machine has dispensed the desired quantity of water. When the machine has dispensed the desired quantity, turn the knob until it is in the rest position ( ). 13 DISPENSING STEAM DISPENSING MAY BE PRECEDED BY SHORT SPURTS OF HOT WATER AND SCALDING IS POSSIBLE. THE HOT WATER/STEAM SPOUT MAY REACH HIGH TEMPERATURES: DO NOT TOUCH IT WITH BARE HANDS. USE THE APPROPRIATE HANDLE ONLY. 1 2 3 selected steam Place a container with the beverage to be warmed up beneath the steam spout. 4 Press the button. 5 Turn the knob to the position. 6 brewing in progress steam The display shows “brewing in progress... steam” Heat the beverage; move the container while heating. 7 Repeat the operation to heat another beverage. After dispensing, clean the steam spout as described on page 34. :KHQ\RXKDYH¿QLVKHGWXUQ the knob until it is in the rest position ( ). 14 BEVERAGE DISPENSING MAKING CAPPUCCINO DISPENSING MAY BE PRECEDED BY SHORT SPURTS OF HOT WATER AND SCALDING IS POSSIBLE. THE HOT WATER/STEAM SPOUT MAY REACH HIGH TEMPERATURES: DO NOT TOUCH IT WITH BARE HANDS. USE THE APPROPRIATE HANDLE ONLY. 1 2 3 selected steam Fill 1/3 of the cup with cold milk. 4 Press the button. 5 Turn the knob to the position. 7 . Immerse the steam spout in the milk. 6 Froth the milk by gently swirling the cup. :KHQ\RXKDYH¿QLVKHGWXUQ the knob until it is in the rest position ( ). 8 strong aroma espresso coffee 08:33 Place the cup beneath the dispensing head. Press the button once: coffee dispensing begins. After dispensing, clean the steam spout as described on page 34. To dispense 2 cappuccinos: • froth two cups of milk by following step 1 to 6; • dispense two coffees by following steps 7 and 8 (in this case, press the button twice). MILK ISLAND (OPTIONAL) 15 This device, which may be purchased separately, enables you to easily and comfortably prepare delicious cappuccinos. Warning: before using the Milk Island, read the manual and all precautions carefully for correct use. Important note: the quantity of milk in the carafe must never be below the “MIN” minimum level nor exceed the “MAX” maximum level. Thoroughly clean all the Milk Island components after use. To guarantee best results when preparing cappuccino, we recommend using cold (0-8°C / 32-45°F), partially skimmed milk. 1 Fill the milk carafe with the quantity of milk desired (between the MIN and MAX levels indicated). 4 2 Place the milk carafe onto the base of the Milk Island. Check that the light on the base is green. The machine will stop automatically after dispensing steam continuously for 2 minutes. To dispense more steam turn the knob to the ( ) position and then back to the position. Remove the carafe using the handle. Turn the knob to the position. 5 When the desired emulsion has been reached, turn the knob until it is in the rest position ( ). Wait for the milk to be frothed. 6 3 7 Gently swirl the carafe and pour the milk into the cup. 8 Position the cup with frothed milk under the dispensing head. Dispense coffee into the cup. 16 BEVERAGE PROGRAMMING Every beverage can be programmed according to your individual tastes. 1. PROGRAMMING FOR SELF-LEARNING You can program the quantity of coffee and/or milk you wish to be dispensed into the cups when you press the button for any beverage. Select the type of beverage you want to program, then press and hold the button until the display shows (for example): programming espresso coffee The machine dispenses coffee. When the required amount is reached, press the The display shows: saved button again. espresso coffee The dispensed quantity of coffee and/or milk is memorized and replaces any previous settings. 2. PROGRAMMING FROM THE “BEVERAGE SETTINGS” MENU To adjust the settings for preparing beverages: press the QDYLJDWLQJWKHFOLFNZKHHOZLWK\RXU¿QJHU button and select “beverage settings” by In this phase you can: exit the programming mode. (see page 18) 1 beverage settings by navigating the click wheel with \RXU¿QJHU\RXFDQFKDQJHWKH settings for: - the quantity of coffee to be brewed; - the coffee temperature; - prebrewing the coffee. restore factory settings save the new settings. - select the quantity of coffee to be ground (opti-dose) or select the function to set: - the coffee temperature; - coffee prebrewing. The following page describes how to program coffee beverages; the settings to program each beverage may differ depending on the type of beverage. 17 1 2 3 strong aroma espresso coffee 08:33 Check that the water and coffee bean container are full; place the cup under the dispensing head. Press the button. 4 1 beverage settings Select “beverage settings”. Press the EXWWRQWRFRQ¿UP 5 1.1 espresso coffee 1. 2. medium aroma espresso coffee When the settings are changed, the message on the GLVSOD\VWDUWVÀDVKLQJ When the changes are stored WKHPHVVDJHVWRSVÀDVKLQJ 2. 1. Select the beverage to program. EXWWRQWRFRQ¿UP Press the 6 a few times Press the button to adjust the quantity of coffee to be ground or select the use of preground coffee. Press the button to save. 8 7 - espresso coffe temperature: medium espresso coffee + 1. temperature: medium espresso coffee 1. 2. 2. Change the coffee quantity by navigating the click wheel with your ¿QJHU FRQ¿UPZLWK . 9 button for more than Press the two seconds to access the other settings to program. Change the temperature setting (high, medium, low) by navigating WKHFOLFNZKHHOZLWK\RXU¿QJHU Press the button to save. 10 prebrewing: normal espresso coffee prebrewing: normal espresso coffee 1. 2. button to select the Press the prebrew setting. Change the prebrew value (normal, long, off) by turning the click wheel with your ¿QJHU3UHVVWKH button to save. Prebrewing: the coffee is slightly dampened before brewing to bring out the full aroma of the coffee which acquires an excellent taste. 18 PROGRAMMING THE MACHINE Some of the machine’s functions can be programmed to customize operations according to your individual preferences. 1 beverage settings button to: Press the FRQ¿UPWKHVHOHFWLRQ - save the new settings. 1 Press the button. 1DYLJDWHWKHFOLFNZKHHOZLWK\RXU¿QJHUWR - select the functions - change the function settings. 1 4 beverage settings Beverage setting (see page 16) 2 Energy saving (see page 31) machine settings 5 special functions Special functions (see page 33) Machine settings (see page 19) 3 energy saving maintenance Maintenance (see page 25) To exit the programming mode: exit 1. 2. 19 MACHINE SETTINGS To change the machine’s operation settings, press the button, select “machine settings” and press the EXWWRQ1DYLJDWHWKHFOLFNZKHHOZLWK\RXU¿QJHUWR 2.1 language English 2.5 set the coffee circuit rinse cycle. set the menu language. 2.2 water hardness 3 acoustic alarm on set/activate the acoustic alarms. 2.4 2.6 cup-warming surface off activate/deactivate the operation of the cup warming surface set the water hardness. 2.3 rinsing on 2.7 clock setting To set the current time, date and hour format to display. filter alert on activate/deactivate the “Aqua Prima” ZDWHU¿OWHUDODUP 1 beverage settings To exit any level of “machine settings” without saving the changes made, press the button. For example: “LANGUAGE” MENU > machine settings > language . To change the language of the display. 1 2 2 machine settings 1. 3 2.1 language English 2.1 language English 1. 2. 2. Select the desired language. After selected, the machine displays all the messages in the language selected. 20 PROGRAMMING THE MACHINE “WATER HARDNESS” MENU > machine settings > water hardness With the “Water hardness” function you can adapt your machine to the degree of hardness of the water you use, so that the machine will request descaling at the right moment. Hardness is expressed on a scale from 1 to 4. The machine is preset at value 3. 1 2 1 Immerse the water hardness tester included with the machine in water for one second. 3 2 machine settings 4 Check the value. The test can be used for one measurement only. 4 2 3 5 2.2 1. water hardness 3 1. 2.2 water hardness 3 1. 2. 2. 2. Set the water hardness obtained from the test and save it. “ACOUSTIC ALARM” MENU > machine settings > acoustic alarm To turn on/off a tone each time a button is pressed. 1 2 2 machine settings 1. 2.3 acoustic alarm on 1. 2. 2. 3 Select by navigating the click ZKHHOZLWK\RXU¿QJHU It is possible to set: - on - off Press the button to save. 21 “FILTER ALARM” MENU > machine settings > filter alert 7RWXUQRQRIIVLJQDOOLQJWKHQHHGWRFKDQJHWKH³$TXD3ULPD´ZDWHU¿OWHU7KHPDFKLQHLQIRUPVWKHXVHUZKHQ WKH³$TXD3ULPD´¿OWHUQHHGVWREHUHSODFHG 1 2 2 machine settings 2.4 1. filter alert on 1. 2. 2. 3 Select by navigating the click ZKHHOZLWK\RXU¿QJHU It is possible to set: - on - off Press the button to save. “RINSE” MENU > machine settings > rinsing The rinse setting the internal circuits in order to guarantee that the beverages are only made with fresh water. The function is enabled as default by the manufacturer. Note: This rinse cycle is performed every time the machine is turned on after the warming phase. 1 2 2 machine settings 2.5 1. rinsing on 1. 2. 2. 3 Select by navigating the click ZKHHOZLWK\RXU¿QJHU It is possible to set: - on - off Press the button to save. “CUP WARMING SURFACE” MENU > machine settings > cup-warming surface To turn on/off the operation of the cup warming surface located on the top of the machine.A warm cup allows you to fully savour the coffee and taste its full aroma. 1 2 2 machine settings 1. 2.6 cup-warming surface off 1. 2. 2. 3 Select by navigating the click ZKHHOZLWK\RXU¿QJHU It is possible to set: - on - off Press the button to save. 22 PROGRAMMING THE MACHINE “CLOCK SETTING” MENU > machine settings > clock setting To set the current time, date and hour format to display. 1 2 2 machine settings In this menu you can set: 2.7 1. clock setting 1. 2. 2. - the current time (hour and minutes) - the hour format (24 hours - AM/PM) - the current date (day - month - year day of the week) - the date format (American international). Time setting > machine settings > clock setting > time setting To set the current time on the machine 1 2 2.7 clock setting 1. 3 2.7.1 time setting 16:54 1. 2. 2.7.1 time setting 16:54 1. 2. 2. Set the time by navigating the FOLFNZKHHOZLWK\RXU¿QJHU button. Save using the 4 2.7.1 time setting 16:54 1. 2. Set the minutes by navigating the FOLFNZKHHOZLWK\RXU¿QJHU Save using the button. 23 Time format > machine settings > clock setting > time format To set the time view mode. This setting adjusts all clock functions to either “am/pm” or “24 hour” formats. 1 2 2.7 clock setting 3 2.7.2 time format 24h 2.7.2 time format 24h 1. 2. 4 2. 5 2.7.2 time format 24h The machine also allows displaying the time in the American format (am/pm). 1. 2. Date setting > machine settings > clock setting > date setting To set the date (day, month, year, day of the week). 1 2 2.7 clock setting 1. 3 2.7.3 date setting tuesday 18/04/06 1. 2. 2.7.3 date setting tuesday 18/04/06 1. 2. 2. Select the day and press the EXWWRQWRFRQ¿UP 24 PROGRAMMING THE MACHINE 4 5 2.7.3 date setting tuesday 18/04/06 2.7.3 1. date setting tuesday 18/04/06 The day of the week is automatically set according to the set date. 1. 2. Select the month and press the EXWWRQWRFRQ¿UP 2. Select the year and press the EXWWRQWRFRQ¿UP Date format > machine settings > clock setting > date format 7RVHWWKHGDWHYLHZPRGH7KHPRGL¿FDWLRQRIWKLVVHWWLQJDGMXVWVDOOWKHSDUDPHWHUVWKDWUHTXLUHYLHZLQJ setting the date. 1 2 2.7 clock setting 3 2.7.4 time format GG/MM/AAAA 2.7.4 time format GG/MM/AAAA 1. 2. 4 2. 5 2.7.4 time format GG/MM/AAAA 1. 2. The machine also allows displaying the date in the American format (MM/GG/AAAA). MAINTENANCE 25 MAINTENANCE To access the machine’s maintenance programs, press the the EXWWRQ1DYLJDWHWKHFOLFNZKHHOZLWK\RXU¿QJHUWR 3.1 water filter button, select “maintenance” and press 3.3 DFFHVVWKHVSHFL¿F³$TXD3ULPD´ ZDWHU¿OWHUPDQDJHPHQWPHQX 3.2 group wash wash the Brew Group. descaling DFFHVVWKHVSHFL¿FGHVFDOLQJ management menu. “WATER FILTER” MENU > maintenance > water filter 7RPDQDJHWKH³$TXD3ULPD´ZDWHU¿OWHU 1 2 3 maintenance In this menu you can: 3.1 1. water filter 1. 2. 2. - check the number of litres before replacement; WXUQWKH¿OWHUVWDWHRQRII ORDGLQLWLDOL]HWKH¿OWHU Litres remaining > maintenance > water filter > litres left 7RGLVSOD\KRZPDQ\OLWUHVRIZDWHUFDQVWLOOEHWUHDWHGEHIRUHFKDQJLQJWKH³$TXD3ULPD´ZDWHU¿OWHU 1 2 3 maintenance 1. 2. 3 3.1 water filter 3.1.1 water filter litres left 59 26 MAINTENANCE Filter state > maintenance > water filter > filter status 7RWXUQWKH¿OWHUFKHFNRQRII WKHPDFKLQHFKHFNVZKHQWKH³$TXD3ULPD´ZDWHU¿OWHUQHHGVWREHFKDQJHGDQG LQIRUPVWKHXVHU7KLVIXQFWLRQPXVWEHDFWLYDWHGZKHQWKH¿OWHULVLQVWDOOHG 1 2 3 maintenance 3 3.1 water filter 3.1.2 1. filter status on 1. 2. 2. 4 Select by navigating the click ZKHHOZLWK\RXU¿QJHU It is possible to set: - on - off Press the button to save. Load filter > maintenance > water filter > activate filter 7RLQLWLDOL]HWKH³$TXD3ULPD´¿OWHU WKLVPXVWEHFDUULHGRXWZKHQ\RXLQVWDOODQHZ¿OWHU 1 2 3 maintenance 3 3.1 water filter 3.1.3 1. activate filter execute now 1. 2. 4 2. 5 6 When the cycle ends, turn the knob to the rest position ( ) and remove the container. 7KH¿OWHULVLQLWLDOL]HG Place a container beneath the steam spout. Turn the knob to the reference. 27 “DESCALING” MENU > maintenance > descaling7RPDQDJHWKHGHFDOFL¿FDWLRQRIWKHPDFKLQH¶VFLUFXLWV 1 2 3 maintenance In this menu you can: 3.2 1. descaling - check the number of litres before descaling; - carry out the machine descaling cycle. 1. 2. 2. Litres remaining > maintenance > descaling > litres left To display how many litres of water can still be used before the machine requests a descaling cycle. 1 2 3 maintenance 3 3.2 descaling 3.2.1 litres left descaling 115 1. 2. Descaling cycle > maintenance > descaling > execute now To perform the automatic descaling cycle. Descaling is necessary every 3-4 months when water dispenses more slowly than normal or when the machine indicates it. The machine must be turned on and will automatically manage the distribution of the descaling agent. A PERSON MUST BE PRESENT DURING THE OPERATION. WARNING! NEVER USE VINEGAR AS A DESCALER. Saeco descaler is recommended; however, you can use any non-toxic and/or non-harmful descaling beverage for coffee machines, commonly available in the shops. The used solution is to be disposed of according to the manufacturer’s instructions and/or regulations in force in the country of use. 28 MAINTENANCE Note: before beginning the descaling cycle make sure that: 1. a large enough container is positioned under the water spout; 2. THE “AQUA PRIMA” FILTER HAS BEEN REMOVED. 1 2 3 maintenance 3 3.2 1. descaling 3.2.2 1. 2. descaling execute now 1. 2. 2. Descaling is carried out at a controlled temperature. If the machine is cold, you must wait until it has reached the right temperature; otherwise you must cool the boiler as follows: If the boiler needs to be heated, the machine does so automatically. When the heating stage is complete, the “open water/steam knob” message appears. Then proceed as described in point 5. 4 5 6 open water/steam knob Place a container beneath the steam spout. 7 8 insert descaler ok to start cycle When the following message appears, the heater is at the right temperature Turn the knob to the reference. 9 insert descaler ok to start cycle Pour the descaling solution into the tank. Insert the tank into the machine. Press the button to start. 29 :KHQWKHVROXWLRQLV¿QLVKHGWKH following message appears on the display: 10 11 descaling cycle please wait The machine begins to dispense the descaling solution through the hot water spout. The dispensing occurs at predetermined intervals, in order to allow the solution to be more effective. 12 passage [ 2/15] fill the water tank The intervals are displayed in such a way as to check the state of progress of the process. Remove the water tank, rinse with fresh drinking water to eliminate traces of descaling VROXWLRQWKHQUH¿OOZLWKIUHVK drinking water. 14 15 Insert the tank with fresh drinking water. 13 rinse cycle please wait rinse cycle ok to start cycle Rinse the machine’s circuits by pressing the button. The machine performs the rinse cycle. During the rinse cycle, the machine may require the water tank WREH¿OOHG rinse cycle completed :KHQWKHULQVHF\FOHLV¿QLVKHGWKH following screen appears. Then the display shows the maintenance screen. 16 When descaling is complete, return to the main menu to dispense beverages. Turn the knob until it is in the rest position ( ). Check the quantity of water in the tank and LQVWDOOWKH³$TXD3ULPD´ZDWHU¿OWHUDJDLQLI desired. 30 Brew Group Washing > maintenance > group wash To clean the machine’s internal circuits used for brewing coffee. To wash the Brew Group, simply clean with water as shown on page 35. This wash completes maintenance of the Brew Group. We recommend using Saeco tablets, which can be purchased separately. Note: before performing this function make sure that: 1. a large enough container is positioned under the spout; 2. the appropriate tablet for cleaning the Brew Group has been inserted into the compartment for pre-ground coffee; WKHZDWHUWDQNFRQWDLQVDVXI¿FLHQWTXDQWLW\RIZDWHU THE WASH CYCLE CANNOT BE INTERRUPTED. A PERSON MUST BE PRESENT DURING THE OPERATION. 1 2 3 maintenance 3 3.3 group wash 3.3 group wash 1. 2. 4 5 3.3.1 Press 6 group wash do it now insert tablet and press start EXWWRQWRFRQ¿UP Insert the tablet as shown above. Press to start. 7 8 passage [2/3] You can check the status of washing. group wash please wait Wait for the cycle to end. 9 wash cycle completed please wait 3 maintenance The Brew Group has been washed. Exiting programming mode. (see page 18) PROGRAMMING THE MACHINE 31 ENERGY SAVING To adjust the energy saving parameters, press the button, select “energy saving” and press the EXWWRQ1DYLJDWHWKHFOLFNZKHHOZLWK\RXU¿QJHUWR 4.1 turn-off delay 180 4.3 Set the machine’s turn on/off times (one setting for each day of the week) Set the time which must pass after the last product dispensing before the machine enters the energy saving mode. 4.2 monday timer setting off Enable/disable the machine’s turn on/ off times programmed for the days of the week. TURN OFF DELAY > energy saving > turn-off delay By default, the off delay time is set at 180 minutes. 1 2 4 energy saving 4.1 turn-off delay 180 1. 2. 3 Select by navigating the click ZKHHOZLWK\RXU¿QJHU It is possible to set: - 15 miniutes - min - 180 miniutes - max Press the button to save. TIMER SETTING > energy saving > timer setting The set times (timer) for the days of the week will only operate if this function is activated. If this is not the case, the timers will have no effect on the machine’s operation. 1 2 4 energy saving 4.2 timer setting off 1. 1. 2. 2. 3 Select by navigating the click ZKHHOZLWK\RXU¿QJHU It is possible to set: - on - off Press the button to save. 32 “MONDAY” TIMER SETTING > energy saving > monday This and the following menus are used to set the turn on/off times for each day of the week. The procedure described below shows how to set the turn on/off times for the day of the week “Monday”. To set the turn on/off times for the other days of the week, follow the same procedure after selecting the desired day. 1 2 4 energy saving 3 4.3 1. monday 4.3.1 switch on 1. 2. 1. 2. 4 2. 5 4.3.1 switch on monday 8:00 6 4.3.1 switch on 1. monday 8:00 4.3.2 switch off 1. 2. 7 2. Set the minutes by navigating the FOLFNZKHHOZLWK\RXU¿QJHU 8 4.3.2 switch off monday 8:00 1. monday 8:00 1. 2. Set the turn on time by navigating the FOLFNZKHHOZLWK\RXU¿QJHU monday 8:00 9 4.3.2 switch off monday 8:00 4.3 monday 1. 2. 2. Set the turn off time by navigating the WRXFKZKHHOZLWK\RXU¿QJHU Set the minutes by navigating the WRXFKZKHHOZLWK\RXU¿QJHU 10 Press to exit the programming of the selected day. 11 4.3 monday You can set the turn on/off times for all the days of the week. 1DYLJDWHWKHFOLFNZKHHOZLWK\RXU¿QJHUWRVHOHFWWKH other days you want to program. 33 SPECIAL FUNCTIONS This menu allows you to access special functions present on the machine. Press the button to access and select “special function” and press the FOLFNZKHHOZLWK\RXU¿QJHUWR 5.1 button. Navigate the reset settings execute now restore the basic machine operating parameters. RESTORE SETTINGS > special function > reset settings The function for restoring all the factory settings is contained in this menu. This function is particularly important for restoring the basic parameters. ALL THE CUSTOM SETTINGS WILL BE LOST AND CANNOT BE RECOVERED. AFTER RESTORING FACTORY SETTINGS, YOU WILL NEED TO RE-PROGRAM ALL THE MACHINE FUNCTIONS, IF DESIRED. 1 2 5 special functions 3 5.1 reset settings execute now reset settings are you sure? 1. 2. Select by pressing the button. 4 5 reset settings in progress.. The display shows the parameter UHVHWFRQ¿UPDWLRQ 5 special functions All parameters have been restored. Exit programming mode. Press the button to reset. 34 CLEANING AND MAINTENANCE GENERAL MACHINE CLEANING The cleaning described below must be performed once a week. Note: if water remains in the tank for several days, do not use it. WARNING! Never immerse the machine in water. If you remove grounds with the machine off or when not signaled on the display, the count of the grounds emptied into the drawer is not reset. For this reason the machine might display the “empty grounds” message even after preparing just a few coffees. 1 Switch off the machine and unplug it. 4 Remove the grounds drawer. 7 Remove the outer sleeve of the steam spout; then re-insert it. 2 Clean the tank and the cover. 5 Empty and clean it. 8 Remove and wash the steam spout support; then re-insert it. 3 Remove the drip tray, empty and wash it. 6 With the brush, clean the preground coffee compartment. 9 Clean the display with a dry cloth. 35 CLEANING THE BREW GROUP. The Brew Group must be cleaned at least once a week. Wash the Brew Group with warm water. WARNING! Do not wash the Brew Group with detergents that can compromise its correct operation. Do not wash in the dishwasher. 1 Open the service door and remove the dregs drawer. 4 Make sure the Brew Group is in rest position; the two references must match. 7 Insert the washed and dried Brew Group. DO NOT PRESS THE “PUSH” BUTTON. 2 Press the PUSH button to remove the Brew Group. 5 Make sure the components are in the correct position. The hook shown must be in the correct position; to FKHFNLWVSRVLWLRQ¿UPO\SUHVVWKH “PUSH” button. 8 Insert the dregs drawer. 3 :DVKWKH%UHZ*URXSDQGWKH¿OWHU and dry. 6 The lever on the rear part of the group must be in contact with the group base. 9 Close the service door. 36 ERROR CODES GUIDE MESSAGE THAT APPEARS HOW TO REMOVE THE MESSAGE out of service (xx) restart to fix… :KHUH [[ LGHQWL¿HVDQHUURUFRGH7XUQRIIDQGDIWHU seconds turn the machine on again to restore normal operation.If the problem persists, call the service centre and give the code (xx) shown on the display. close coffee bean lid Close the coffee bean hopper cover to be able to make a beverage. fill container wth coffee Put coffee beans into the provided container. insert the brew group Insert the brew group in its place. insert grounds drawer Insert the dregs drawer. empty grounds Warning that does not block the machine. Proceed as for the next alarm. empty grounds drawer Remove the grounds drawer and empty the grounds into an appropriate container (See page 34, steps 4 and 5.). Note: The grounds drawer must be emptied only when the machine requires it and when the machine is turned on. If you empty the drawer with the machine turned off it will not record the emptying operation. close door In order for the machine to operate, the side door must be closed. fill the water tank. 7KHWDQNPXVWEHUHPRYHGDQGUH¿OOHGZLWKIUHVKGULQNLQJ water. empty the drip tray Open the side door and empty the drip tray located under the Brew Group. change the filter 7KH$TXD3ULPD¿OWHUPXVWEHUHSODFHGLQWKHIROORZLQJFDVHV 1. 60 litres of water have been dispensed; 2. 90 days have passed since its installation; 3. 20 days have passed and the machine has not been used. Note: this message only appears when “on” has been selected LQWKHZDWHU¿OWHUIXQFWLRQ 6HHSDJH carafe missing milk island missing The steam knob has been turned to the position and either the Milk Island has not been installed or the carafe is not positioned correctly. Install the Milk Island or position the carafe correctly. Otherwise, turn the knob until it is in the rest position ( ). descale A descaling cycle must be performed on the machine’s internal circuits. stand-by… energy saving… Press the button. TROUBLESHOOTING PROBLEMS The machine does not turn on. CAUSES The machine is not connected to the power source. 37 SOLUTIONS Connect the machine to the power source. The plug has not been plugged into the Insert the plug into the machine’s power back of the machine. socket. Hot water or steam is not dispensed. The hole of the steam spout is clogged. Clean the hole of the steam spout using a pin. Coffee has little crema. The coffee blend is unsuitable or coffee Change coffee blend. is not freshly roasted. The Brew Group does not come out. Coffee is not brewed. Coffee is brewed slowly. Coffee leaks out of the dispensing head. SBS system knob turned towards the left Turn the SBS system knob to the right The Brew Group is out of place. Turn the machine on. Close the service door. The Brew Group is automatically placed in the correct position. Dregs drawer is inserted. 5HPRYHWKHGUHJVGUDZHU¿UVWWKHQWKHBrew Group. Water tank is empty. Fill the water tank and prime the circuit again. Brew group is dirty. Clean the Brew Group. &RIIHHLVWRR¿QH Change coffee blend. Decrease the dose. Brew group dirty. Clean the Brew Group. Dispensing head is clogged. Clean the dispensing holes with a soft cloth. Please contact the service centre for any problems not covered in the above table or when the suggested solutions do not solve the problem. 38 SOS SAFETY RULES IN CASE OF EMERGENCY IMMEDIATELY UNPLUG THE CORD FROM THE OUTLET. ONLY USE THE APPLIANCE • • • • Indoors. For preparing coffee, hot water and for frothing milk. For domestic use. By adults in non altered psycho-physical conditions. PRECAUTIONS FOR THE USE OF THE MACHINE • • • • • • Do not use the machine for purposes other than those indicated above, in order to avoid danger. Do not introduce any substances other than those indicated in the instruction manual. 'XULQJWKHQRUPDO¿OOLQJRIDQ\UHVHUYRLUVDOOQHDUE\UHVHUYRLUVPXVWEHFORVHG Fill the water tank only with fresh drinking water: Hot water and/or any other liquid may damage the machine. Do not use carbonated water. 'RQRWSXW¿QJHUVRUDQ\PDWHULDORWKHUWKDQFRIIHHEHDQVLQWKHFRIIHHJULQGHU Before manipulating the coffee grinder, turn of the machine’s main switch and unplug the cord. Do not put instant coffee or whole bean coffee in the ground coffee container. 2QO\XVH\RXU¿QJHUZKHQRSHUDWLQJWKH/&'VFUHHQ CONNECTION TO ELECTRICAL POWER The connection to the electrical network must be carried out in accordance with the safety regulations in force in the user’s country. The machine must be connected to a socket which is: • compatible with the type of plug installed on the machine; VXLWDEO\VL]HGWRFRPSO\ZLWKWKHUDWLQJVVKRZQRQWKHPDFKLQHLGHQWL¿FDWLRQSODWH • effectively grounded. The power cord must not: FRPHLQWRFRQWDFWZLWKDQ\W\SHRIOLTXLG GDQJHURIHOHFWULFVKRFNVDQGRU¿UH • be crushed and/or come in contact with sharp surfaces; • be used to move the machine; • be used if damaged; • be handled with damp or wet hands; • be wound in a coil when the machine is being operated. • Be tampered with. INSTALLATION • • • • &KRRVHDVROLGVWDWLRQDU\ÀDWVXUIDFH QRPRUHWKDQRILQFOLQDWLRQ Do not install the machine in areas where water could be sprayed. Optimal operational temperature: 10°C - 40°C / 50-104 degrees Fahrenheit maximum humidity: 90%. The machine should be installed in an adequately lit, ventilated, hygienic location and the electric socket should be within easy reach. • Do not place on heated surfaces! • Install it at least 10 cm / 4” from the walls and cooking surfaces. • Do not use in places where the temperature may drop to a level equal to and/or lower than 0°C / 32 degrees Fahrenheit. If the machine has been exposed to such conditions notify the customer service center, who will have to carry out a safety check. 'RQRWXVHWKHPDFKLQHQHDULQÀDPPDEOHDQGRUH[SORVLYHVXEVWDQFHV • The machine must not be used in an explosive or volatile atmosphere or where there is a high concentration of dust or oily substances suspended in the air. • Do not install the machine on top of other appliances. 39 DANGERS • • • • • • • The appliance must not be used by children and persons who have not been informed of its operation. The appliance is dangerous to children. When left unattended, unplug from the electrical outlet. Keep the coffee machine packaging out of the reach of children. Never direct the jet of hot water and/or steam towards yourself or others. Danger of scalding. Do not insert objects through the appliance’s openings. (Danger! Electrical Current!). Do not pull out the plug by yanking on the power cord or touching it with wet hands. Warning. Danger of burning when in contact with hot water, steam and the hot water spout. FAILURES 'RQRWXVHWKHDSSOLDQFHLIDIDLOXUHKDVEHHQYHUL¿HGRUVXVSHFWHGIRUH[DPSOHDIWHUEHLQJGURSSHG • Any repairs must be performed by an authorized customer service center. • Do not use the appliance with a defective power cord. The manufacturer or its customer service center will have to replace the power cable if damaged. (Caution! Electrical Current!) • Turn off the appliance before opening the service door. Danger of burns! CLEANING / DESCALING • For cleaning the milk and coffee circuits use only recommended detergents provided with the machine. These detergents must not be used for other purposes. • Before cleaning the machine, the main switch must be turned to OFF (0), unplugged from the socket and cooled down. • Keep the appliance from coming into contact with splashes of water or immersing in water. • Do not dry the machine’s parts in conventional or microwave ovens. • The machine and its components must be cleaned and washed after the machine has not been used for a certain period. REPLACEMENT PARTS For safety reasons, use only original replacement parts and original accessories. WASTE DISPOSAL - The packing materials can be recycled. - Appliance: unplug the appliance and cut the power cord. - Deliver the appliance and power cord to a service center or public waste disposal facility This product complies with eu directive 2002/96/ec. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this SURGXFW)RUPRUHGHWDLOHGLQIRUPDWLRQDERXWUHF\FOLQJRIWKLVSURGXFWSOHDVHFRQWDFW\RXUORFDOFLW\RI¿FH\RXU household waste disposal service or the shop where you purchased the product. FIRE SAFETY ,QFDVHRI¿UHXVH&DUERQ'LR[LGHH[WLQJXLVKHUV &22). Do not use water or dry-powder extinguishers. 40 TECHNICAL DATA TECHNICAL DATA Nominal voltage See label on the appliance Power rating See label on the appliance Power supply See label on the appliance Shell material ABS - Thermoplastic Size (w x h x d) 320 x 370 x 400 mm - 12.60” x 14.57” x 15.75” Weight 9 Kg - 19.8 lbs Cable length 1200 mm - 47.24” Control panel Front (display 2 x 24 characters) Water tank 1.7 liters - 57.5 oz / Removable Coffee bean hopper capacity 250 grams - 8.9 oz / coffee beans Pump pressure 15 bar Boiler Stainless steel Coffee grinder With ceramic burrs Quantity of ground coffee 7 - 10.5 grams / 0.25 - 0.37 oz. Dregs drawer capacity 14 Safety devices Boiler pressure safety valve – Double safety thermostat. Subject to engineering and manufacturing changes due to technological developments. The machine conforms to the European Directive 89/336/EEC (Italian Legislative Decree 476 dated 04/12/92) concerning electromagnetic compatibility.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : 3.1.1-111 Producer : Acrobat Distiller 7.0.5 (Windows) Keywords : Saeco Talea Ring Plus; Talea Ring Plus; Instruction manual; owners manual; users manual; user guide Create Date : 2006:10:05 16:43:59+02:00 Modify Date : 2007:05:15 16:51:34-07:00 Metadata Date : 2007:05:15 16:51:34-07:00 Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 7218 bytes, use -b option to extract) Document ID : uuid:FE9F26EE7F54DB119815ABAC86A568C4 Instance ID : uuid:ea016ef5-ae88-4d90-a7e7-771c37ec1e10 Derived From Instance ID : uuid:a7c4a38c-dd06-49d8-808c-064d04edb05b Derived From Document ID : uuid:6F7A8E7D0E4FDB118C79920CC6C402AF Format : application/pdf Title : Saeco Talea Ring Plus User's manual Description : Talea Ring Plus Espresso machine user manual Subject : Saeco Talea Ring Plus, Talea Ring Plus, Instruction manual, owners manual, users manual, user guide Has XFA : No Page Count : 42EXIF Metadata provided by EXIF.tools