Samsung Electro Mechanics UCLZD100P0S ZIGBEE LIGHTING DIMMER User Manual

Samsung Electro Mechanics ZIGBEE LIGHTING DIMMER Users Manual

Users Manual

DP~~~ Manual for Zigbee Lighting Dimmer V1.0 Model Name UCLZD100P0S P / N USER P / N TYPE Description Specification No Issued Mechanical checking Electrical checking Approved
Contents 1 Document Revision ............................................................................................ 3 2 ZLD Pictures ....................................................................................................... 3 3 Features ............................................................................................................. 3 4 Components ....................................................................................................... 3 5 Mechanical Specifications .................................................................................. 4 5.1 General ................................................................................................................................. 4 5.2 Switch Configuration ............................................................................................................. 4 5.3 Use Condition ....................................................................................................................... 4 6 RF Specifications ............................................................................................... 4 6.1 General Performance Section .............................................................................................. 4 7 ZLD Black Diagram ............................................................................................ 5 8 ZLD Configuration .............................................................................................. 5 9 Product Label ..................................................................................................... 6
1 Document Revision Rev. No Issued date & Descriptions Date Issued by Checked byVer 1.0 Initially released 2010-01-21 Sung-Jin, Kim 2 ZLD Pictures [SIDE] [Top] [Bottom] 3 Features TYPE 2.4GHz / IEEE 802.15.4 / ZIGBEE CHIP ICPZBS240,ATMEGA88 AC INPUT AC 110V -240V 50/60Hz OUTPUT 0 – 10V 0 V to 10V 2CH TRIAC Phase Control 1CH 2A DIP SWITCH PAN ID, Channel, MAC Address setting COMUNICATHION UART, ZIGBEE WIRELESS COMUNICATION Current TRIAC= MAX:2A , 0TO10 =MAX:13mA 4 Components Case Upper Metal (1ea) Outer case Case Bottom Metal (1ea) Outer case Antenna Cover Plastic(1ea) Outer case Insulator Plastic(1ea) Inner Insulation Screw FH 3X6L (3ea) Fastened PCB & Case
5 Mechanical Specifications 5.1 General Size 203.25(W) x 52.6(H) x 38.6(D)mm Weight 180g Switch KSD-82HS / 8CH x 2(16CH) / SMD TYPE Connector 2Pin AC ,3Pin AC,4pin 0to10 Enclosure Metal, ABS 5.2 Switch Configuration 5.3 Use Condition Working Temperature -20 ~ 55℃ Storage Temperature -25~80℃ Humidity Below 90% 6 RF Specifications General Performance Section Performance Indoor/Urban Range Up to 30 m Outdoor RF Line of sight Range Up to 100 m Transmit Power Output 10 mW (0dBm) RF Data Rate 250,000 bps Receiver Sensitivity -98 dBm (1% PER) General Frequency 2.4GHz Antenna Options Chip Ant. Point-Point, Point-Mulitpoint, Peer-Peer, Mesh Channel / PAN ID / Source Address Filtration Option Channal / PAN ID / Source Address MAC Address Setting PAN ID & Channel Setting
7 ZLD Black Diagram 8 ZLD Configuration PAN ID Setting Switch TRIAC OUTPUTAC INPUT Fastening Hole Fastening Hole 0 TO 10 2CH
9 Product Label FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected. • Consult the dealer or an experienced radio/TV technician for help. Caution Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation IMPORTANT NOTE: FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
IMPORTANT Safety Instruction: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this equipment near water. 6) Do not using near any heat sources such as radiators, heat resisters, stove, or other equipment that produce heat.

Navigation menu