Samsung Electro Mechanics UCLZD100P0S ZIGBEE LIGHTING DIMMER User Manual

Samsung Electro Mechanics ZIGBEE LIGHTING DIMMER Users Manual

Users Manual

Download: Samsung Electro Mechanics UCLZD100P0S ZIGBEE LIGHTING DIMMER User Manual
Mirror Download [FCC.gov]Samsung Electro Mechanics UCLZD100P0S ZIGBEE LIGHTING DIMMER User Manual
Document ID1283569
Application IDNjT9JiqIhh1FisNeNQtiTw==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize23.89kB (298610 bits)
Date Submitted2010-05-19 00:00:00
Date Available2010-05-20 00:00:00
Creation Date2010-05-17 17:55:13
Producing SoftwareAcrobat Distiller 7.0.5 (Windows)
Document Lastmod2010-05-17 17:55:13
Document TitleUsers Manual
Document CreatorPScript5.dll Version 5.2
Document Author: Administrator

DP
~~
Manual
for
Zigbee Lighting Dimmer
V1.0
Model Name
P/N
USER P / N
TYPE
Description
Specification No
Issued
Mechanical
checking
UCLZD100P0S
Electrical
checking
Approved
Contents
Document Revision ............................................................................................ 3
ZLD Pictures ....................................................................................................... 3
Features ............................................................................................................. 3
Components ....................................................................................................... 3
Mechanical Specifications .................................................................................. 4
5.1
General ................................................................................................................................. 4
5.2
Switch Configuration............................................................................................................. 4
5.3
Use Condition ....................................................................................................................... 4
RF Specifications ............................................................................................... 4
6.1
General Performance Section .............................................................................................. 4
ZLD Black Diagram ............................................................................................ 5
ZLD Configuration .............................................................................................. 5
Product Label ..................................................................................................... 6
1
Document Revision
Rev. No
Ver 1.0
Issued date & Descriptions
Initially released
Issued by
Sung-Jin, Kim
Checked by
ZLD Pictures
[SIDE]
Date
2010-01-21
[Top]
[Bottom]
Features
TYPE
2.4GHz / IEEE 802.15.4 / ZIGBEE
CHIP
ICPZBS240,ATMEGA88
AC INPUT
AC 110V -240V 50/60Hz
0 – 10V
OUTPUT
TRIAC
0 V to 10V 2CH
Phase
1CH 2A
Control
DIP SWITCH
PAN ID, Channel, MAC Address setting
COMUNICATHION
UART, ZIGBEE WIRELESS COMUNICATION
Current
TRIAC= MAX:2A , 0TO10 =MAX:13mA
Components
Case Upper
Metal (1ea)
Outer case
Case Bottom
Metal (1ea)
Outer case
Antenna Cover
Plastic(1ea)
Outer case
Insulator
Plastic(1ea)
Inner Insulation
Screw
FH 3X6L (3ea)
Fastened PCB & Case
5
Mechanical Specifications
5.1
5.2
General
Size
203.25(W) x 52.6(H) x 38.6(D)mm
Weight
180g
Switch
KSD-82HS / 8CH x 2(16CH) / SMD TYPE
Connector
2Pin AC ,3Pin AC,4pin 0to10
Enclosure
Metal, ABS
Switch Configuration
MAC Address Setting
PAN ID & Channel Setting
5.3
Use Condition
Working Temperature
-20 ~ 55℃
Storage Temperature
-25~80℃
Humidity
Below 90%
RF Specifications
General Performance Section
Indoor/Urban Range
Outdoor RF Line of sight
Range
Performance
General
Up to 30 m
Up to 100 m
Transmit Power Output
10 mW (0dBm)
RF Data Rate
250,000 bps
Receiver Sensitivity
-98 dBm (1% PER)
Frequency
2.4GHz
Antenna Options
Chip Ant.
Point-Point, Point-Mulitpoint, Peer-Peer, Mesh
Channel / PAN ID / Source Address
Filtration Option
Channal / PAN ID / Source Address
7
ZLD Black Diagram
ZLD Configuration
TRIAC OUTPUT
AC INPUT
Fastening Hole
0 TO 10 2CH
Fastening Hole
PAN ID Setting Switch
9
Product Label
FCC Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution
Modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation
IMPORTANT NOTE:
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator
and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
IMPORTANT Safety Instruction:
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this equipment near water.
6) Do not using near any heat sources such as radiators, heat resisters, stove, or other equipment that produce
heat.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2010:05:17 17:55:13+09:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2010:05:17 17:55:13+09:00
Format                          : application/pdf
Creator                         : Administrator
Title                           : <4D6963726F736F667420576F7264202D20B8DEB4BABEF35FBFB5B9AE5F>
Document ID                     : uuid:bc5714a0-3118-42a3-aa46-0ece65238556
Instance ID                     : uuid:c89dbb04-74a7-4267-9e1d-53d8ed60dd51
Page Count                      : 7
Author                          : Administrator
EXIF Metadata provided by EXIF.tools
FCC ID Filing: E2XUCLZD100P0S

Navigation menu