Samsung Electronics Co AT46L5 DLP Projection TV User Manual BP68 00423A 00 cover
Samsung Electronics Co Ltd DLP Projection TV BP68 00423A 00 cover
Contents
- 1. Users Manual 1
- 2. Users Manual 2
- 3. Safety Guide
Users Manual 2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 472035 |
| Application ID | U7eDI9AbXlONBPaR1ZOh9Q== |
| Document Description | Users Manual 2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 290.04kB (3625546 bits) |
| Date Submitted | 2004-09-23 00:00:00 |
| Date Available | 2004-09-23 00:00:00 |
| Creation Date | 2004-09-16 13:54:43 |
| Producing Software | Acrobat Distiller 5.0.5 for Macintosh |
| Document Lastmod | 2004-09-16 13:54:58 |
| Document Title | BP68-00423A-00(cover) |
| Document Creator | QuarkXPress.. 4.1E: AdobePS 8.7.3 (301) |
| Document Author: | cyj |
BP68-00423A-00(46~67) 9/2/04 4:58 PM Page 53 DNIeTM (Digital Natural Image engine) This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm presents brighter, clearer, much detailed image. DNIeTM technology will fit every signals into your eyes. Press the MENU button. Press the … or † button to select “Picture”, then press the ENTER button. Picture Input Picture Sound Channel Setup Press the … or † button to select “DNIe”, then press the ENTER button. Input Picture Sound Setup Press the EXIT button to exit. Move : Standard : Warm1 : Wide : On : On : Off Enter √ √ √ √ √ √ √ √ Return Picture Channel Press the … or † button to select “Off”, “Demo” or “On”, then press the ENTER button. Mode Color Tone Size Digital NR DNIe My Color Control Film Mode PIP Mode Color Tone Size Digital NR DNIe My Color Control Film Mode PIP Move : Standard : Warm1 : Wide : On : On : Off Enter √ √ √ √ √ √ √ √ Return Picture Input Picture Sound Channel Setup Mode Color Tone Size Digital NR DNIe My Color Control Film Mode PIP Move : Standard : Warm1 : Wide : On Off : On Demo On : Off Enter Return Alternate method Press the DNIe button on the remote control repeatedly to select one of the settings. • On: Switches on the DNIe mode. DNIe Demo DNIe On DNIe Off • Off: Switches off the DNIe mode. • Demo: The screen before applying DNIe appears on the right and the screen after applying DNIe appears on the left. English - 53 BP68-00423A-00(46~67) 9/2/04 4:59 PM Page 54 Special Features Setting the My Color Control Mode My Color Control allows users to adjust colors to according to their preferences, by adjusting skin, sky, and grass tones using the predefined settings (“Blue”, “Green”, “Pink”, “Standard”, “Custom”) without affecting other colors on the screen. Using the Easy Control Menu Press the MENU button. Press the … or † button to select “Picture”, then press the ENTER button. Picture Mode Color Tone Size Digital NR DNIe My Color Control Film Mode PIP Input Picture Sound Channel Setup Press the … or † button to select “My Color Control”, then press the ENTER button. Move Picture Setup Move • Changing the settings in the “Detail Control” menu (see next page) will automatically set the My Color Control mode to “Custom”. English - 54 : Off Enter Return √ √ : Custom Picture Sound Channel Setup Move Original Enter Return Blue Easy Control Blue Press the EXIT button to exit. √ √ √ √ √ √ √ √ : Standard : Warm1 : Wide : On : On My Color Control Easy Control Detail Control Input Press the ENTER button to accept the selected mode. NOTE Return Picture Channel : Off Enter Mode Color Tone Size Digital NR DNIe My Color Control Film Mode PIP Input Sound Press the ENTER button to select “Easy Control”. Press the œ or √ button to select one of the picture settings you want. The original picture (before adjustment) is shown on the left side, while the selected mode is shown on the right side. √ √ √ √ √ √ √ √ : Standard : Warm1 : Wide : On : On Move Green Enter Pink √ Return • “Blue”: Emphasizing Clear Blues. Feel the clear sun shine on the blue Mediterranean sea. • “Green”: Emphasizing Mild Greens. Feel the translucent, romantic turquoise sea. • “Pink”: Emphasizing Warm Skin Colors. • “Standard”: Standard Picture • “Custom”: Changing the settings in the Detail Control menu will automatically set to Custom (see next page). BP68-00423A-00(46~67) 9/2/04 4:59 PM Page 55 Custom Settings Press the MENU button. Press the … or † button to select “Picture”, then press the ENTER button. Press the … or † button to select “My Color Control”, then press the ENTER button. Press the … or † button to select “Detail Control”, then press the ENTER button. Picture Mode Color Tone Size Digital NR DNIe My Color Control Film Mode PIP Input Picture Sound Channel Setup Move : Standard : Warm1 : Wide : On : On : Off Enter √ √ √ √ √ √ √ √ Return My Color Control Easy Control Detail Control Input √ √ : Custom Picture Sound Channel Setup Press the … or † button to select one of the My Color Control color you want, then press the ENTER button. There are three My Color Control colors: “Pink”, “Green” and “Blue”. Press the œ or √ button to adjust the value of a color selected. Changing the adjustment value will refresh the adjusted screen. Move Enter Return Detail Control Pink Green Blue Reset Input Picture 50 50 100 Sound Channel Setup Move Original Enter Return Adjusted Detail Control ▲ 50 Pink ▼ Move Return Adjust Resetting the My Color Control Colors to the Factory Defaults You can return to the factory default settings for My Color Control colors. Detail Control Input Picture Press the MENU button to display the “Detail Control” menu. Press the … or † button to select “Reset”, then press the ENTER button. The previously adjusted My Color Control Colors will be reset to the factory defaults. Pink Green Blue Reset 50 50 50 Sound Channel Setup Move Enter Return English - 55 BP68-00423A-00(46~67) 9/2/04 4:59 PM Page 56 Special Features Setting the Film Mode You can automatically sense and process film signals from all sources and adjust the picture for optimum quality. Press the MENU button. Press the … or † button to select “Picture”, then press the ENTER button. Picture Input Picture Sound Channel Setup Press the … or † button to select “Film Mode”, then press the ENTER button. Picture Channel Setup Picture Channel Setup NOTE • Film mode is supported in 480i only. English - 56 : Off Enter √ √ √ √ √ √ √ √ Return Mode Color Tone Size Digital NR DNIe My Color Control Film Mode PIP Move : Standard : Warm1 : Wide : On : On : Off Enter √ √ √ √ √ √ √ √ Return Picture Input Sound Press the EXIT button to exit. Move : Standard : Warm1 : Wide : On : On Picture Input Sound Press the … or † button to select “Off” or “On”, then press the ENTER button. Mode Color Tone Size Digital NR DNIe My Color Control Film Mode PIP Mode Color Tone Size Digital NR DNIe My Color Control Film Mode PIP Move : Standard : Warm1 : Wide : On : On : OffOff On Enter Return BP68-00423A-00(46~67) 9/2/04 4:59 PM Page 57 Viewing Picture-In-Picture One of the most best features of your TV is the Picture-In-Picture (PIP) feature. The advanced PIP system allows you to watch two different pictures at once, even if you don’t have a VCR connected to your TV. Activating the PIP Press the MENU button. Press the … or † button to select “Picture”, then press the ENTER button. Picture Input Picture Sound Channel Setup Press the … or † button to select “PIP”, then press the ENTER button. Picture Channel Setup Move √ √ √ √ √ √ √ √ : Standard : Warm1 : Wide : On : On : Off Enter Return Picture Input Sound Press the ENTER button to select “PIP”. Press the … or † button to select “On”, then press the ENTER button. The sub picture appears in the corner of the screen. Mode Color Tone Size Digital NR DNIe My Color Control Film Mode PIP Mode Color Tone Size Digital NR DNIe My Color Control Film Mode PIP Move : Standard : Warm1 : Wide : On : On : Off Enter √ √ √ √ √ √ √ √ Return PIP Input Picture Sound Channel Setup PIP Source Swap Size Position Channel Select Sound Move :Off On :On TV : Air 11 : Main Enter Return Press the EXIT button to exit. Alternate method Press the PIP button on the remote control repeatedly to activate or deactivate the PIP. NOTES • This feature doesn’t function when the “V-Chip” or “Caption” is active. • This feature doesn’t operate in the HDMI mode. • If you turn the TV off while watching and turn it on again, then the mode will return to normal video. English - 57 BP68-00423A-00(46~67) 9/2/04 4:59 PM Page 58 Special Features Selecting an External Source You can use PIP to view a signal from an external source, such as a VCR. Press the MENU button. Press the … or † button to select “Picture”, then press the ENTER button. Picture Input Picture Sound Channel Setup Press the … or † button to select “PIP”, then press the ENTER button. Input Picture Sound Setup Move : Standard : Warm1 : Wide : On : On : Off Enter √ √ √ √ √ √ √ √ Return Picture Channel Press the … or † button to select “Source”, then press the ENTER button. If you have not connected any equipment to the TV’s input jacks, the signal from these inputs will not appear. Mode Color Tone Size Digital NR DNIe My Color Control Film Mode PIP Mode Color Tone Size Digital NR DNIe My Color Control Film Mode PIP Move : Standard : Warm1 : Wide : On : On : Off Enter √ √ √ √ √ √ √ √ Return PIP Input Picture Sound Channel Setup PIP Source Swap Size Position Channel Select Sound Move : On : TVTV AV1 AV2 AV3 :S-Video1 Air 11 S-Video2 : Main S-Video3 Enter Return Press the … or † button to select an external signal, then press the ENTER button. Press the EXIT button to exit. NOTES • The sub picture doesn’t support “ANT 2 IN”, “Component1”, “Component2”, “PC”, “DVI” and “HDMI”. • For more information about external signals, see “Viewing an External Signal Source” (See page 41). If you select “TV”, the sub picture is the same as the main picture. English - 58 BP68-00423A-00(46~67) 9/2/04 4:59 PM Page 59 Swapping the Sub Picture and Main Picture Press the MENU button. Press the … or † button to select “Picture”, then press the ENTER button. Picture Input Picture Sound Channel Setup Press the … or † button to select “PIP”, then press the ENTER button. Input Picture Sound Setup Move : Standard : Warm1 : Wide : On : On : Off Enter √ √ √ √ √ √ √ √ Return Picture Channel Press the … or † button to select “Swap”, then press the ENTER button. The sub picture appears in the main picture, and vice versa. Mode Color Tone Size Digital NR DNIe My Color Control Film Mode PIP Mode Color Tone Size Digital NR DNIe My Color Control Film Mode PIP Move : Standard : Warm1 : Wide : On : On : Off Enter √ √ √ √ √ √ √ √ Return PIP Input Picture Sound Channel Setup PIP Source Swap Size Position Channel Select Sound Move : On : TV √ √ : Air 11 : Main √ √ √ √ Enter Return Press the EXIT button to exit. NOTE • The swapping doesn’t support “ANT 2 IN”, “Component1”, “Component2”, “PC”, “DVI” and “HDMI”. English - 59 BP68-00423A-00(46~67) 9/2/04 4:59 PM Page 60 Special Features Changing the Size of the Sub Picture Press the MENU button. Press the … or † button to select “Picture”, then press the ENTER button. Picture Input Picture Sound Channel Setup Press the … or † button to select “PIP”, then press the ENTER button. Picture Sound Setup Press the EXIT button to exit. English - 60 : Off Enter √ √ √ √ √ √ √ √ Return Mode Color Tone Size Digital NR DNIe My Color Control Film Mode PIP Move : Standard : Warm1 : Wide : On : On : Off Enter √ √ √ √ √ √ √ √ Return PIP Input Picture Sound Press the … or † button to select a size you want, then press the ENTER button. Move : Standard : Warm1 : Wide : On : On Picture Input Channel Press the … or † button to select “Size”, then press the ENTER button. Mode Color Tone Size Digital NR DNIe My Color Control Film Mode PIP Channel Setup PIP Source Swap Size Position Channel Select Sound Move : On : TV : Air 11 : Main Enter Return BP68-00423A-00(46~67) 9/2/04 4:59 PM Page 61 Changing the Location of the Sub Picture Press the MENU button. Press the … or † button to select “Picture”, then press the ENTER button. Picture Input Picture Sound Channel Setup Press the … or † button to select “PIP”, then press the ENTER button. Picture Sound Setup : Off Enter √ √ √ √ √ √ √ √ Return Mode Color Tone Size Digital NR DNIe My Color Control Film Mode PIP Move : Standard : Warm1 : Wide : On : On : Off Enter √ √ √ √ √ √ √ √ Return PIP Input Picture Sound Press the … or † button to select a position you want, then press the ENTER button. Move : Standard : Warm1 : Wide : On : On Picture Input Channel Press the … or † button to select “Position”, then press the ENTER button. Mode Color Tone Size Digital NR DNIe My Color Control Film Mode PIP Channel Setup PIP Source Swap Size Position Channel Select Sound Move : On : TV : Air 11 : Main Enter Return Press the EXIT button to exit. English - 61 BP68-00423A-00(46~67) 9/2/04 4:59 PM Page 62 Special Features Changing the Channel of the Sub Picture After you set the signal source (antenna or cable) of sub picture, it is easy to change channels. Press the MENU button. Press the … or † button to select “Picture”, then press the ENTER button. Picture Input Picture Sound Channel Setup Press the … or † button to select “PIP”, then press the ENTER button. Picture Channel Setup : Off Enter Return Mode Color Tone Size Digital NR DNIe My Color Control Film Mode PIP Move : Standard : Warm1 : Wide : On : On : Off Enter √ √ √ √ √ √ √ √ Return Input Picture Channel Setup PIP Source Swap Size Position Channel Select Sound Move : On : TV ▲ Air 11 : Air ▼ : Main Enter Return Press the EXIT button to exit. Alternate method Press the CH or CH button on the remote control to change channels of sub picture during PIP on. NOTE • The channels of sub picture are not available when antenna is set to “ANT 2 IN”. It links to “ANT 1 IN”. English - 62 √ √ √ √ √ √ √ √ PIP Sound Press the … or † button to select a channel you want, then press the ENTER button. Move : Standard : Warm1 : Wide : On : On Picture Input Sound Press the … or † button to select “Channel”, then press the ENTER button. Mode Color Tone Size Digital NR DNIe My Color Control Film Mode PIP BP68-00423A-00(46~67) 9/2/04 4:59 PM Page 63 Selecting the Sound Source You can use this feature to hear sound from the main or sub picture. Press the MENU button. Press the … or † button to select “Picture”, then press the ENTER button. Picture Input Picture Sound Channel Setup Press the … or † button to select “PIP”, then press the ENTER button. Input Picture Sound Setup : Off Enter √ √ √ √ √ √ √ √ Return Mode Color Tone Size Digital NR DNIe My Color Control Film Mode PIP Move : Standard : Warm1 : Wide : On : On : Off Enter √ √ √ √ √ √ √ √ Return PIP Input Picture Sound Press the … or † button to select “Main” or “Sub”, then press the ENTER button. “Main” is for the main TV picture audio, and “Sub” is for the sub picture (PIP) audio. Move : Standard : Warm1 : Wide : On : On Picture Channel Press the … or † button to select “Select Sound”, then press the ENTER button. Mode Color Tone Size Digital NR DNIe My Color Control Film Mode PIP Channel PIP Source Swap Size Position Channel Select Sound : On : TV : Air 11 Main : Main Sub Setup Move Enter Return Press the EXIT button to exit. English - 63 BP68-00423A-00(46~67) 9/2/04 4:59 PM Page 64 Special Features Setting the SRS TSXT TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. Trusurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. Press the MENU button. Press the … or † button to select “Sound”, then press the ENTER button. Sound Input Picture Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute : Custom Off Stereo Off Off √ √ √ √ √ √ Channel Setup Press the … or † button to select “SRS TSXT”, then press the ENTER button. Move Enter Return Sound Input Picture Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute : Custom Off Stereo Off Off √ √ √ √ √ √ Channel Setup Press the … or † button to select “Off”, “3D Mono” or “Stereo”, then press the ENTER button. Move Enter Return Sound Input Picture Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute : Custom : OffOff Mono : 3D Stereo Stereo : Off : Off Channel Press the EXIT button to exit. Setup Move Enter Return Alternate method Press the SRS button on the remote control repeatedly to select one of the settings. English - 64 BP68-00423A-00(46~67) 9/2/04 4:59 PM Page 65 Choosing a Multi-Channel Sound (MTS) track Depending on the particular program being broadcast, you can listen to “Mono”, “Stereo” or “SAP (Separate Audio Program)”. “SAP” audio is usually a foreign-language translation. Sometimes “SAP” has unrelated information like news or weather. Press the MENU button. Press the … or † button to select “Sound”, then press the ENTER button. Sound Input Picture Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute √ √ √ √ √ √ : Custom Off Stereo Off Off Channel Setup Press the … or † button to select “MTS”, then press the ENTER button. Move Enter Return Sound Input Picture Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute √ √ √ √ √ √ : Custom Off Stereo Off Off Channel Setup Press the … or † button to select “Mono”, “Stereo” or “SAP”, then press the ENTER button. Press the EXIT button to exit. Move Enter Return Sound Input Picture Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute : Custom Off Mono Stereo Stereo Off OffSAP Channel Setup Move Enter Return Alternate method Press the MTS button on the remote control repeatedly to select one of the settings. • Choose “Mono” for channels that are broadcasting in mono, or if you are having difficulty receiving a stereo signal. • Choose “Stereo” for channels that are broadcasting in stereo. • Choose “SAP” to listen to the Separate Audio Program, which is usually a foreign-language translation. English - 65 BP68-00423A-00(46~67) 9/2/04 4:59 PM Page 66 Special Features Auto Volume Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the volume every time the channel is changed. “Auto Volume” automatically adjusts the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. Press the MENU button. Press the … or † button to select “Sound”, then press the ENTER button. Sound Input Picture Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute : Custom Off Stereo Off Off √ √ √ √ √ √ Channel Setup Press the … or † button to select “Auto Volume”, then press the ENTER button. Move Enter Return Sound Input Picture Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute : Custom Off Stereo Off Off √ √ √ √ √ √ Channel Setup Press the … or † button to select “Off” or “On”, then press the ENTER button. Input Picture Return Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute : Custom : Off : Stereo : Off Off : On Off Channel Setup English - 66 Enter Sound Sound Press the EXIT button to exit. Move Move Enter Return BP68-00423A-00(46~67) 9/2/04 4:59 PM Page 67 Enjoying the Sound of External Speakers When using external device such as Home Theater Systems, external speaker, or external Audio Amplifier set “Internal Mute” to “On” to produce sound which is consistent with what the picture shows. Press the MENU button. Press the … or † button to select “Sound”, then press the ENTER button. Sound Input Picture Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute : Custom Off Stereo Off Off √ √ √ √ √ √ Channel Setup Press the … or † button to select “Internal Mute”, then press the ENTER button. Move Enter Return Sound Input Picture Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute : Custom Off Stereo Off Off √ √ √ √ √ √ Channel Setup Press the … or † button to select “Off” or “On”, then press the ENTER button. Enter Return Sound Input Picture Sound Press the EXIT button to exit. Move Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute Channel Setup : Custom : Off : Stereo : Off : Off Off On Move Enter Return English - 67 BP68-00423A-00(68~83) 9/2/04 5:02 PM Page 68 Special Features Using the V-Chip Access to channels and programs is controlled by a password (i.e., a 4-digit secret code that is defined by the user). The on-screen menu will instruct you to assign a password (you can change it later, if necessary). NOTE • The V-Chip doesn’t function when the PIP is active. How to Change Your Password Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Press the … or † button to select “V-Chip”, then press the ENTER button. Press the number buttons to enter your current 4-digit pin number. (The default pin number for a new TV set is “0000”.) The “V-Chip” menu is displayed. Press the … or † button to select “Change PIN”, then press the ENTER button. Setup Input Picture Sound Channel Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC Move √ √ √ √ √ √ √ √ : English : Off : On Enter Return V-Chip Input Picture Sound Enter PIN Channel Setup 0 9 Enter PIN ReturnV-Chip Input Picture V-Chip Lock : Off TV Parental Guidelines MPAA Rating Change PIN √ √ √ √ Sound Channel Setup Move Enter Return V-Chip Input Picture Sound V-Chip Lock : Off TV Parental Guidelines MPAA Rating Canadian English Canadian French Change PIN √ √ √ √ √ √ Channel NOTE • If you forget the pin number, press the remote control buttons in the following sequence, which resets the pin to 0-0-0-0: POWER (Off), MUTE, 8, 2, 4, POWER (On). English - 68 Setup Press the number buttons to enter your new 4-digit pin number. Re-enter your new pin number to confirm. Press the EXIT button to exit. Move Enter Return Change PIN Input Picture Sound Enter New PIN Channel Setup 0 9 Enter PIN Return BP68-00423A-00(68~83) 9/2/04 5:02 PM Page 69 How to Enable/Disable the Rating Controls Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Press the … or † button to select “V-Chip”, then press the ENTER button. Press the number buttons to enter your current 4-digit pin number. (The default pin number for a new TV set is “0000”.) The “V-Chip” menu is displayed. Press the ENTER button to select “V-Chip Lock”. Press the … or † button to select “On”, then press the ENTER button. Press the EXIT button to exit. Setup Input Picture Sound Channel Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC Move √ √ √ √ √ √ √ √ : English : Off : On Enter Return V-Chip Input Picture Sound Enter PIN Channel Setup 0 9 Enter PIN Return V-Chip Input Picture V-Chip Lock :Off Off TV Parental Guidelines On MPAA Rating Change PIN Sound Channel Setup Move Enter Return V-Chip Input Picture Sound V-Chip Lock :Off Off TV Parental Guidelines On MPAA Rating Canadian English Canadian French Change PIN Channel Setup Move Enter Return English - 69 BP68-00423A-00(68~83) 9/2/04 5:02 PM Page 70 Special Features How to Set up Restrictions Using the “TV Parental Guidelines” The parental restrictions can be set up using either of two methods: The “TV Parental Guidelines” or “MPAA Rating”. Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Press the … or † button to select “V-Chip”, then press the ENTER button. Press the number buttons to enter your current 4-digit pin number. (The default pin number for a new TV set is “0000”.) The “V-Chip” menu is displayed. Press the … or † button to select “TV Parental Guidelines”, then press the ENTER button. Setup Input Picture Sound Channel Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC Move √ √ √ √ √ √ √ √ : English : Off : On Enter Return V-Chip Input Picture Sound Enter PIN Channel Setup 0 9 Enter PIN Return V-Chip Input Picture V-Chip Lock : On TV Parental Guidelines MPAA Rating Change PIN √ √ √ √ Sound Channel Setup Move Enter Return V-Chip Input Picture Sound V-Chip Lock : On TV Parental Guidelines MPAA Rating Canadian English Canadian French Change PIN √ √ √ √ √ √ Channel Setup English - 70 Move Enter Return BP68-00423A-00(68~83) 9/2/04 5:02 PM Page 71 You can independently lock the TV ratings. The locked TV (FCC) ratings are indicated by the symbol “ ”. Press the …/†/œ/√ buttons and the ENTER button to activate the appropriate restrictions for TV (FCC) rating system. TV Parental Guidelines Picture Sound Channel Setup TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA : Young children : Children 7 and over : General audience : Parent Guidance : Viewers 14 and over : Mature Audience ALL FV Input TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA Move Enter Return Press the EXIT button to exit. NOTES • These categories consist of two separate groups: “TV-Y” and “TV-Y7” (young children through age 7), and “TV-G” through “TV-MA” (everybody else). • The restrictions for these two groups work independently: If a household includes very young children as well as young adults, the TV parental guidelines must be set up separately for each age group. (See page 73.) English - 71 BP68-00423A-00(68~83) 9/2/04 5:02 PM Page 72 Special Features How to Set up Restrictions Using the “MPAA Rating” The Movie rating system uses the “MPAA” (Motion Picture Association of America) system, and its main application is for movies. When the rating control is on, the TV will automatically block any programs that are coded with objectionable ratings (either “MPAA Rating” or “TV Parental Guidelines”). Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Press the … or † button to select “V-Chip”, then press the ENTER button. Press the number buttons to enter your current 4-digit pin number. (The default pin number for a new TV set is “0000”.) The “V-Chip” menu is displayed. Setup Input Picture Sound Channel Language Time V-Chip Caption Blue Screen Melody Color Weakness PC Setup Move Press the … or † button to select “MPAA Rating”, then press the ENTER button. : Off : On Enter Return V-Chip Input Picture Enter PIN Sound Channel Setup 0 9 √ √ √ √ √ √ √ √ : English Enter PIN Return V-Chip Input Picture V-Chip Lock : On TV Parental Guidelines MPAA Rating Change PIN √ √ √ √ Sound Channel Setup Move Enter Return V-Chip Input Picture Sound V-Chip Lock : On TV Parental Guidelines MPAA Rating Canadian English Canadian French Change PIN √ √ √ √ √ √ Channel Setup You can independently lock the movie ratings. The locked movie ratings are indicated by the symbol “ ”. Press the …/†/ENTER buttons to activate the appropriate restrictions for movie rating system. Press the EXIT button. English - 72 Move Enter Return MPAA Rating Input Picture Sound Channel Setup Block PG PG-13 NC-17 NR Move Enter Return BP68-00423A-00(68~83) 9/2/04 5:02 PM Page 73 Important Notes About Parental Locks Explanation of the MPAA and TV (FCC) Rating Systems: TV (FCC) Age-Based Ratings TV-MA Mature audiences only. This program may contain mature themes, profane language, graphic violence and explicit sexual content. TV-14 Parents strongly cautioned. This program may contain sophisticated themes, sexual content, strong language and more intense violence. TV-PG Parental guidance suggested. The program may contain infrequent coarse language, limited violence, some suggestive sexual dialog and situations. TV (FCC) Content Category FV Violence. Sexual content. Offensive language. Dialog sexual innuendo. Fantasy or cartoon violence. TV-G General audience. It contains little or no violence, no strong language, and little or no sexual dialog or situations. TV-Y7 Directed to older children. Themes and elements in this program may include mild physical or comedic violence, or may frighten children under the age of seven. TV-Y All children. The themes and elements in this program are specifically designed for a very young audience, including children from ages two – six. MPAA Rating System (Movies) General audience. No restriction. PG Children under 13 should be accompanied by an adult. PG-13 Parental guidance suggested. Children under 13 should be accompanied by an adult. Restricted. Viewers should be 17 or older. NC-17 Not classified. Viewers should be 17 or older. Adults only. NR Not rated. • TV (FCC) ratings : The particular rating that you have selected will be locked (and indicated as a red “L” on a blue background). Also, all of the age-based ratings will be locked within the particular group (i.e., “group 1” or “group 2”). Suppose that the TV-G rating and all of its contents (V, S, L, and D) are locked. In that case, more restrictive ratings (TV-PG, TV-14, and TV-MA) and all of their contents (V, S, L, and D) are automatically locked as well. • MPAA ratings : The particular rating that you have selected will be locked. In addition, more restrictive ratings will be locked as well. • Neither TV (FCC) ratings nor MPAA ratings apply to news programs. English - 73 BP68-00423A-00(68~83) 9/2/04 5:02 PM Page 74 Special Features How to Set up Restrictions Using the Canadian English Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Press the … or † button to select “V-Chip”, then press the ENTER button. Press the number buttons to enter your current 4-digit pin number. (The default pin number for a new TV set is “0000”.) The “V-Chip” menu is displayed. Press the … or † button to select “Canadian English”, then press the ENTER button. Setup Input Picture Sound Channel Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC Move √ √ √ √ √ √ √ √ : English : Off : On Enter Return V-Chip Input Picture Sound Enter PIN Channel Setup 0 9 Enter PIN Return V-Chip Input Picture Sound V-Chip Lock : On TV Parental Guidelines MPAA Rating Canadian English Canadian French Change PIN √ √ √ √ √ √ Channel Setup English - 74 Move Enter Return BP68-00423A-00(68~83) 9/2/04 5:02 PM Page 75 Press the … or † button to select a appropriate restriction. Canadian English Input Picture Press the ENTER button to activate the restriction selected. The “ ” symbol is indicated. Block Sound Channel C8+ PG 14+ 18+ Setup Press the EXIT button. Move Enter Return Exempt programming includes...news, sports, documentaries and other information programming, talk shows, music videos, and variety programming. Programming intended for children under age 8. C8+ Programming generally considered acceptable for children 8 years and over to watch on their own. General programming, suitable for all audiences. PG Parental Guidance. 14+ Programming contains themes or content which may not be suitable for viewers under the age of 14. 18+ Adult programming. English - 75 BP68-00423A-00(68~83) 9/2/04 5:02 PM Page 76 Special Features How to Set up Restrictions Using the Canadian French Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Press the … or † button to select “V-Chip”, then press the ENTER button. Press the number buttons to enter your current 4-digit pin number. (The default pin number for a new TV set is “0000”.) The “V-Chip” menu is displayed. Press the … or † button to select “Canadian French”, then press the ENTER button. Setup Input Picture Sound Channel Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC Move √ √ √ √ √ √ √ √ : English : Off : On Enter Return V-Chip Input Picture Sound Enter PIN Channel Setup 0 9 Enter PIN Return V-Chip Input Picture Sound V-Chip Lock : On TV Parental Guidelines MPAA Rating Canadian English Canadian French Change PIN √ √ √ √ √ √ Channel Setup English - 76 Move Enter Return BP68-00423A-00(68~83) 9/2/04 5:02 PM Page 77 Press the … or † button to select a appropriate restriction. Canadian French Input Block Picture Press the ENTER button to activate the restriction selected. The “ ” symbol is indicated. Sound Channel 8 ans+ 13 ans+ 16 ans+ 18 ans+ Setup Press the EXIT button. Move Enter Return Exempt programming includes...news, sports, documentaries and other information programming, talk shows, music videos, and variety programming. General. ans+ 8+ General-Not recommended for young children. 13 ans+ Programming may not be suitable for children under the age of 13. 16 ans+ Programming is not suitable for children under the age of 16. 18 ans+ Programming restricted to adults. English - 77 BP68-00423A-00(68~83) 9/2/04 5:02 PM Page 78 Special Features Viewing Closed Caption Information Your TV decodes and displays the closed captions information that is broadcast along with some television shows. These captions are usually subtitles for the hearing impaired or translations into other languages. All VCRs record the closed caption signal from television programs, so prerecorded video tapes can also deliver closed-caption information. Check for the closed caption symbol ( ) on the tape’s package or your TV program-schedule. Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Press the … or † button to select “Caption”, then press the ENTER button. Press the ENTER button to select “Caption”. Press the … or † button to select “On”, then press the ENTER button. Setup Input Picture Sound Channel Setup Move : English : Off : On Enter √ √ √ √ √ √ √ √ Return Caption Input Picture Caption Mode Channel Field OnOff On Caption Sound Channel Setup Press the … or † button to select “Mode”, then press the ENTER button. Press the … or † button to select “Caption” or “Text”, then press the ENTER button. Language Time V-Chip Caption Blue Screen Melody Color Weakness PC Move Enter Return Caption Input Picture Caption Mode Channel Field On Caption Caption 1 Text Sound Channel Setup Move Enter Return • In “Caption” mode, caption appears at the bottom of the screen, and they usually cover only a small portion of the picture. • In “Text” mode, information unrelated to the program, such as news or weather, is displayed. Text often covers a large portion of the screen. English - 78 BP68-00423A-00(68~83) 9/2/04 5:02 PM Page 79 Depending on the particular broadcast, it might be necessary to make changes to “Channel” and “Field”. Press the … or † button to select “Channel”, then press the ENTER button. Press the … or † button to select “1” or “2”, then press the ENTER button. Caption Input Picture Caption Mode Channel Field √ √ √ √ On Caption Sound Channel Setup Move Enter Return Caption Input Picture Caption Mode Channel Field On Caption 1 1 1 2 Sound Channel Setup Press the … or † button to select “Field”, then press the ENTER button. Press the … or † button to select “1” or “2”, then press the ENTER button. Move Enter Return Caption Input Picture Caption Mode Channel Field On Caption 1 1 Sound Channel Setup Move Enter Return • Different channels and fields display different information: “Field 2” carries additional information that supplements the information in “Field 1”. (For example, “Channel 1” may have subtitles in English, while “Channel 2” has subtitles in Spanish.) NOTES • The Caption function doesn’t operate when the PIP is active. • Misspellings and unusual characters sometimes occur during closed caption transmissions, especially those of live events. There may be a small delay before captions appear when you change channels. These are not malfunctions of the TV. English - 79 BP68-00423A-00(68~83) 9/2/04 5:02 PM Page 80 Special Features Setting the Blue Screen Mode If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue Screen” mode to “Off”. Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Setup Input Picture Sound Channel Setup Press the … or † button to select “Blue Screen”, then press the ENTER button. Picture Channel Setup Picture Channel Setup English - 80 : Off : On Enter √ √ √ √ √ √ √ √ Return Language Time V-Chip Caption Blue Screen Melody Color Weakness PC Move : English : Off : On Enter √ √ √ √ √ √ √ √ Return Setup Input Sound Press the EXIT button to exit. Move : English Setup Input Sound Press the … or † button to select “On” or “Off”, then press the ENTER button. Language Time V-Chip Caption Blue Screen Melody Color Weakness PC Language Time V-Chip Caption Blue Screen Melody Color Weakness PC Move : English : Off Off : On On Enter Return BP68-00423A-00(68~83) 9/2/04 5:02 PM Page 81 Setting The On/Off Melody A melody sound can be set to come on when the TV is powered On or Off. Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Setup Input Picture Sound Channel Setup Press the … or † button to select “Melody”, then press the ENTER button. Input Picture Sound Setup : Off : On Enter √ √ √ √ √ √ √ √ Return Language Time V-Chip Caption Blue Screen Melody Color Weakness PC Move : English : Off : On Enter √ √ √ √ √ √ √ √ Return Setup Input Picture Sound Press the EXIT button to exit the menu. Move : English Setup Channel Press the … or † button to select “On”, then press the ENTER button. Language Time V-Chip Caption Blue Screen Melody Color Weakness PC Channel Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC Move : English : Off Off : On On Enter Return English - 81 BP68-00423A-00(68~83) 9/2/04 5:02 PM Page 82 Special Features Using the Color Weakness Enhancement Feature This feature adjusts the Red, Blue or Green color to enhance the picture according to the user's particular color weakness. Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Setup Input Picture Sound Channel Setup Press the … or † button to select “Color Weakness”, then press the ENTER button. Picture Channel Setup : Off : On Enter Return Language Time V-Chip Caption Blue Screen Melody Color Weakness PC Move √ √ √ √ √ √ √ √ : English : Off : On Enter Return Color Weakness Input Picture Color Weakness Red Green Blue Off : On On Sound Channel Setup Press the … or † button to select a color to be adjusted, then press the ENTER button. Move √ √ √ √ √ √ √ √ : English Setup Input Sound Press the ENTER button to select “Color Weakness”. Press the … or † button to select “On”, then press the ENTER button. Language Time V-Chip Caption Blue Screen Melody Color Weakness PC Move Enter Return Color Weakness Input Picture Color Weakness Red Green Blue : On √ Sound Press the œ or √ button to adjust the value of a color selected. Channel Setup Press the EXIT button to exit. Move Enter Return Color Weakness ▲ Red ▼ Move English - 82 Adjust Return BP68-00423A-00(68~83) 9/2/04 5:02 PM Page 83 PC Display BP68-00423A-00(84~95) 9/2/04 5:09 PM Page 84 PC Display Using Your TV as a Computer (PC) Display How to Connect Your PC to the TV This figure shows the Standard Connector-jack panel. The actual configuration on your TV may be different, depending on the model. TV Rear Panel 15Pin(D-Sub) Cable Audio Cable PC NOTE • The “Anynet” jack is for repairs and software upgrades. English - 84 BP68-00423A-00(84~95) 9/2/04 5:09 PM Page 85 Setting up Your PC Software (Based on Widows 98) The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic setup information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) First, click on “Settings” on the Windows start menu. While “Settings” is highlighted, move the cursor so that “control panel” is highlighted. When the control panel screen appears, click on “Display” and a display dialog-box will appear. Navigate to the “Settings” tab on the display dialog box. The two key variables that apply to the TV-PC interface are “resolution” and “colors”. The correct settings for these two variables are: * Screen area (sometimes called “resolution”): 1024 x 768 pixels * Colors: “24-bit” color (might also be expressed as “16 million colors”). If a vertical-frequency option exists on your display settings dialog box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box. continued... English - 85 BP68-00423A-00(84~95) 9/2/04 5:09 PM Page 86 PC Display Display Modes Horizontal Frequency [KHz] Vertical Frequency [Hz] Pixel Clock [MHz] Sync Polarity (H/V) 25.175 70.00 31.47 +/28.322 70.00 31.47 -/35.5 85.00 37.93 -/+ -/+ 25.175 60.00 31.47 640 x 480 -/30.24 66.70 35.00 -/31.50 72.80 37.86 31.50 75.00 37.50 -/-/36.00 85.00 43.27 -+/36.00 56.30 35.16 SVGA 800 x 600 +/+40.00 37.88 60.30 +/+ 50.00 72.20 48.08 +/+ 49.50 75.00 46.87 +/+ 56.25 85.10 53.67 -/+ 57.284 74.60 49.73 832 x 624 -/65.00 60.00 48.36 XGA 1024 x 768 -/75.00 70.10 56.40 +/78.75 75.00 60.02 74.25 60 33.75 DTV 1920 x 1080i 74.25 60 45.00 1280 x 720p 27 60 31.47 720 x 483p Mode VGA Resolution 640 x 350 720 x 400 NOTE • Both screen position and size will vary, depending on the type of PC monitor and its resolution. The table above shows all of the display modes that are supported: * The interlace mode is not supported. * The TV will operate abnormally if a non-standard video format is selected. NOTES • When this TV is used as a PC display, 32-bit color is supported (over 16 million colors). • Your PC display screen might appear different, depending on the manufacturer (and depending on your particular version of Windows). Check your PC instruction book for information about connecting your PC to a TV display-monitor. • Same modes as PC are supported for the signal input to the DVI jack. Only a separate sync signal is supported. English - 86 BP68-00423A-00(84~95) 9/2/04 5:09 PM Page 87 Adjusting the Picture Quality The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen. Press the SOURCE button to select “PC”. Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Setup Input Picture Sound Channel Setup Press the … or † button to select “PC”, then press the ENTER button. Picture Channel Setup Move √ √ √ √ √ √ √ √ : English : Off : On Enter Return Setup Input Sound Press the … or † button to select “Coarse” or “Fine”, then press the ENTER button. Language Time V-Chip Caption Blue Screen Melody Color Weakness PC Language Time V-Chip Caption Blue Screen Melody Color Weakness PC Move √ √ √ √ √ √ √ √ : English : Off : On Enter Return PC Input Picture Sound √ √ √ Coarse Fine Position Auto Adjustment Recall Channel Setup Pressing the œ or √ button to remove the picture noise. Move Enter Return ▲ Coarse ▼ 1344 Press the EXIT button to exit. ▲ Fine ▼ NOTE • This feature may change the width of the image. If necessary, adjust the position to center. English - 87 BP68-00423A-00(84~95) 9/2/04 5:09 PM Page 88 PC Display Changing the Picture Position After connecting the TV to your PC, adjust the position of picture if it is not well-aligned. Press the SOURCE button to select “PC”. Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Setup Input Picture Sound Channel Language Time V-Chip Caption Blue Screen Melody Color Weakness PC Setup Press the … or † button to select “PC”, then press the ENTER button. Move Picture Channel Enter Language Time V-Chip Caption Blue Screen Melody Color Weakness PC Setup : Off : On Return Setup Input Sound Press the … or † button to select “Position”, then press the ENTER button. √ √ √ √ √ √ √ √ : English Move √ √ √ √ √ √ √ √ : English : Off : On Enter Return PC Input Picture Sound √ √ √ Coarse Fine Position Auto Adjustment Recall Channel Setup Adjust the position of picture by pressing the …/†/œ/√ button. Move Enter Return Position Input ▲ Picture ▼ ▼ Sound Press the EXIT button to exit. Channel Setup ▼ Move Enter Return NOTE • If a PC signal is input to “DVI” or “HDMI”, you can’t adjust the quality and position of picture. English - 88 BP68-00423A-00(84~95) 9/2/04 5:09 PM Page 89 Adjusting the Picture Quality and Position Automatically This feature allows the TV to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically. Press the SOURCE button to select “PC”. Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Setup Input Picture Sound Channel Setup Press the … or † button to select “PC”, then press the ENTER button. Picture Channel Setup Press the EXIT button to exit. Move √ √ √ √ √ √ √ √ : English : Off : On Enter Return Setup Input Sound Press the … or † button to select “Auto Adjustment”, then press the ENTER button. The picture quality and position are automatically adjusted, and the picture returns to original view about a few seconds later. Language Time V-Chip Caption Blue Screen Melody Color Weakness PC Language Time V-Chip Caption Blue Screen Melody Color Weakness PC Move √ √ √ √ √ √ √ √ : English : Off : On Enter Return PC Input Picture Sound √ √ √ Coarse Fine Position Auto Adjustment Recall Channel Setup Move Enter Return Auto in Progress Please Wait English - 89 BP68-00423A-00(84~95) 9/2/04 5:09 PM Page 90 PC Display Initializing the Picture Settings You can replace all picture settings with the factory default values. Press the SOURCE button to select “PC”. Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Setup Input Picture Sound Channel Setup Press the … or † button to select “PC”, then press the ENTER button. Picture Channel Setup Press the EXIT button to exit. English - 90 Move √ √ √ √ √ √ √ √ : English : Off : On Enter Return Setup Input Sound Press the … or † button to select “Recall”, then press the ENTER button. The picture settings are replaced with the factory default values. Language Time V-Chip Caption Blue Screen Melody Color Weakness PC Language Time V-Chip Caption Blue Screen Melody Color Weakness PC Move √ √ √ √ √ √ √ √ : English : Off : On Enter Return PC Input Picture Sound √ √ √ Coarse Fine Position Auto Adjustment Recall Channel Setup Move Enter Return BP68-00423A-00(84~95) 9/2/04 5:10 PM Page 91 Changing the Picture Size (PC Mode) You can select the picture size which best corresponds to your viewing requirements. Press the SOURCE button to select “PC”. Press the MENU button. Press the … or † button to select “Picture”, then press the ENTER button. Press the … or † button to select “Size”, then press the ENTER button. Press the œ or √ button to select the screen format you want, then press the ENTER button. Press the EXIT button to exit. Picture Input Picture Sound Channel Setup Mode Color Tone Size Digital NR DNIe My Color Control Film Mode PIP Move : Standard : Warm1 : Wide PC : On : On : Off Enter √ √ √ √ √ √ √ √ Return Size Input Picture Sound Wide TV Wide PC Expend 4:3 Channel Setup Move Enter Return Alternate method Press the P.SIZE button on the remote control repeatedly to select one of the picture size settings. • “Wide TV”: Scales the picture to the size of the TV screen regardless of the aspect ratio of the input source. • “Wide PC”: Scales the picture to 92% of the TV screen, regardless of the aspect ratio of the input source. The picture position ( ) and size ( ) adjustment are available by pressing the …/†/œ/√ button. NOTES • The “Wide PC” and “Expand” modes are recommended for the PC mode. • “Expand”: Scales the picture to the aspect ratio of the input source. • “4:3”: Displays the picture as it is without changing the aspect ratio of input source. • In VGA (640x480) and SVGA (800x600) modes, the “Wide” and “4:3” modes are available. Source (PC/DVI) 1280 x 720 Wide TV ➝ Wide PC ➝ Expand ➝ 4:3 • In XGA (1024x768) mode, the “Wide” mode is available. 1024 x 768 Wide TV ➝ Wide PC ➝ Expand 1920 x 1080i 720 x 483 (480p) Others Picture Size Wide TV ➝ 4:3 Wide TV ➝ 4:3 Wide TV ➝ Wide PC ➝ Expand ➝ 4:3 English - 91 BP68-00423A-00(84~95) 9/2/04 5:10 PM Page 92 SAMSUNG BP68-00423A-00(84~95) 9/2/04 5:10 PM Page 93 Appendix BP68-00423A-00(84~95) 9/2/04 5:10 PM Page 94 Appendix Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest service center. Problem Possible Solution Poor picture quality. Try another channel. Adjust the antenna. Check all wire connections. Poor sound quality. Try another channel. Adjust the antenna. Make sure the MUTE button is off. No picture or sound. Try another channel. Press the SOURCE button. Make sure the TV is plugged in. Check the antenna connections. No color, wrong colors or tints. Make sure the program is broadcasted in color. Adjust the picture settings. Picture rolls vertically. Adjust the antenna. Check all wire connections. If you are using a VCR, check the tracking. The TV operates erratically. Unplug the TV for 30 seconds, then try operating it again. Your remote control does not operate your TV. Press the MODE button to put your remote control into TV mode. Make sure the remote has batteries. The TV won’t switch on. Make sure the wall outlet is working. Make sure the remote has batteries. • The display panel used for the DLP TV is composed of many tiny pixels. These, pixels may occasionally appear on the screen. English - 94 BP68-00423A-00(84~95) 9/2/04 5:10 PM Page 95 Cleaning and Maintaining Your TV With proper care, your TV will give you many years of service. Please follow these guidelines to get the maximum performance from your TV. Placement • Do not put the TV near extremely hot, cold, humid or dusty places. • Do not place the TV near appliances with electric motors that create magnetic fields, such as vacuum cleaners. • Keep the ventilation openings clear; do not place the TV on a soft surface, such as cloth or paper. • Place the TV in a vertical position only. Liquids • Do not handle liquids near or on the TV. Liquids that spill into it can cause serious damage. Cabinet • • • • Never open the cabinet or touch the parts inside. Wipe your TV with a clean, dry cloth. Never use water, cleaning fluids, wax, or chemicals. Do not put heavy objects on top of the cabinet. This DLP TV projects the image onto a large screen by applying an optical system. If you place the TV set face down, it might cause a problem because dirt, or some other contaminant may become attached to the inside of the TV set. Temperature • If your TV is suddenly moved from a cold to a warm place, unplug the power cord, and allow at least two hours for moisture that may have formed inside the unit to dry completely. Using Your TV in Another Country If you plan to take your TV with you to a foreign country, please be aware of the different television systems that are in use around the world. A TV designed for one system may not work properly with another system due to differences in the TV channel frequencies. Specifications Model HL-P4674W Voltage AC 120V Frequency of Operation Power Consumption Dimension (W x D x H) Weight 60Hz 200 watts 1094 x 339 x 814 mm 43.07 x 13.35 x 32.05 inches 31.5 Kg / 69.44 lbs English - 95 BP68-00423A-00(cover) 9/2/04 4:48 PM Page 2 DLPTV 1-800-SAMSUNG (1-800-726-7864) Samsung Electronics America Service Division 400 Valley Road, Suite 201 Mount Arlington, NJ 07856 www.samsungusa.com Samsung Electronics Canada Inc. Samsung Customer Care 7037 Financial Drive Mississauga, Ontario L5N 6R3 www.samsung.ca BP68-00423A-00
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2004:09:16 13:54:58-03:00 Create Date : 2004:09:16 13:54:43-03:00 Title : BP68-00423A-00(cover) Author : cyj Creator : QuarkXPress.. 4.1E: AdobePS 8.7.3 (301) Producer : Acrobat Distiller 5.0.5 for Macintosh Page Count : 44 Mod Date : 2004:09:16 13:54:58-03:00 Creation Date : 2004:09:16 13:54:43-03:00 Metadata Date : 2004:09:16 13:54:58-03:00EXIF Metadata provided by EXIF.tools