Samsung Electronics Co ATKM102000 ARTIK-1020 User Manual ARTIK ation Where do the antennas go

Download:
Mirror Download [FCC.gov]
Document ID	3013874
Application ID	PKI4arqj7Rf5EU64ZRGIaQ==
Document Description	User Manual_antenna
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	16.11kB (201330 bits)
Date Submitted	2016-06-01 00:00:00
Date Available	2016-12-18 00:00:00
Creation Date	2016-06-01 06:52:28
Producing Software	Acrobat Web Capture 9.0
Document Lastmod	2016-06-01 06:52:39
Document Title	ARTIK Documentation: Where do the antennas go?

Where do the antennas go?
↓
There are four antennas included in the developer kit - three long antennas and one
short antenna.
The short antenna is used on the Low-Power, Wide-Area (SigFox) antenna
connector.
The three long antennas are used on the Wi-Fi, Wi-Fi/Bluetooth, and ZigBee
antenna connectors.
The three long antennas are identical – the red stripes are removable rubber bands.
Here
arecookies
the antenna
the ARTIKin5,our
Ver.Privacy
0.5 developer
board:
We use
on ourlocations
website for
as described
Policy, to
enhance your browsing experience
and we process personal information in the United States which, for users outside the United States,
may have a lower standard of data privacy laws compared to your country of residence. Please click
Accept to confirm your acceptance to our use of cookies. By continuing to use the website you are
deemed to have consented to our use of cookies.
Accept
Here are the antenna locations for the ARTIK 10, Ver. 0.5 developer board:
Antenna Specifications
The antennas supplied with the ARTIK developer kit are of the following specifications.
Antenna type
Dipole Antenna
Antenna peak gain
2.7dBi
Frequency
2.4GHz, 5GHz (for Wi-Fi, BT, ZigBee)
Connector type
SMA-M
FCC (United States) Compliance Statement

Replacement antennas must be of the same type, must be of equal or
less gain than an antenna previously authorized under the same grant of
certification (A3LATKM052000 for ARTIK 5), and must have similar inband and out-of-band characteristics (consult specification sheet for
cutoff frequencies). Any new antenna type, or higher gain antenna,
approved under Part 15 requires a Class II permissive change, and the
requirements of § 15.203 must be met.
IC (Canada) Compliance Statement

This radio transmitter (A3LATKM052000 for ARTIK 5) has been approved
by Industry Canada to operate with the antenna types listed above with
the maximum permissible gain indicated. Antenna types not included in
this list, having a gain greater than the maximum gain indicated for that
type, are strictly prohibited for use with this device. (RSS-GEN clause 8.3)
 Last updated on: May 31 2016, 3:15 PM
« PREV: BOARD REFERENCE
NEXT: POWERING UP THE BOARD »
ARTIK FAMILY
Overview
Solutions
Partners
Blog
Developers
ARTIK MODULES
Overview
Partners
Order
Blog
Developers
ARTIK CLOUD
Overview
Works with...
Pricing
Blog
Developers
CONTACT US
   
Privacy Policy Terms & Conditions
© 2016 SAMSUNG. All rights reserved.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2016:06:01 06:52:28-04:00
Modify Date                     : 2016:06:01 06:52:39-04:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2016:06:01 06:52:39-04:00
Format                          : application/pdf
Title                           : ARTIK Documentation: Where do the antennas go?
Document ID                     : uuid:703f47e7-0435-4d5a-9ff9-1dc1a7f3d2aa
Instance ID                     : uuid:107eda8c-3b2f-494e-8288-73c780eb3caa
Producer                        : Acrobat Web Capture 9.0
Page Count                      : 5

EXIF Metadata provided by EXIF.tools