Samsung Electronics Co BT07PS Wireless Photo Player User Manual file E pdf 549F 04 manual eng 01 htm Index

Download:
Mirror Download [FCC.gov]
Document ID	891995
Application ID	vJEqHhmVvLZTADUBnHMAuA==
Document Description	User manual 1 of 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	244.37kB (3054657 bits)
Date Submitted	2008-01-22 00:00:00
Date Available	2008-01-22 00:00:00
Creation Date	2007-12-28 17:56:36
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2007-12-28 17:57:04
Document Title	file://E:\pdf\549F-04\manual\eng\01_htm\Index.htm
Document Creator	PScript5.dll Version 5.2
Document Author:	master

BT07PS
|
Safety Symbols
Power
| Installation |
Using and
Cleaning
Safety Symbols
Make sure to follow the directions below to prevent accidents and damage to the product.
Failure to follow the accompanying directions may lead to serious injury or death.
Failure to follow the accompanying directions may lead to minor personal injury or property damage.
Safety Symbols
Power
| Installation |
Using and
Cleaning
Power
The images here are for reference only, and are not applicable in all cases (or countries).
Insert the power plug correctly until it is firmly in place.
Failing to do so, may cause fire.
Do not use a damaged power plug, cord or outlet, as this may cause electric shock
or fire.
Do not touch the power plug with wet hands, as this may cause electric shock.
Do not connect more than one appliance to a single outlet, as an overheated outlet
may cause fire.
Do not use force to pull the power cord. Don't place anything heavy on the power
cord, as this may cause electric shock or fire.
Make sure to turn the power off and disconnect the power plug from the outlet
before moving the product. Make sure to disconnect the connection cables from
other devices as well.
Moving the product without disconnecting the power cord may damage it while
moving, and may cause electric shock or fire.
Hold and pull out the plug by its body when disconnecting it from the outlet, as
pulling the plug out by the cord may cause it to be damaged.
Failing to do so, may cause fire, or the product may not turn on normally.
Ensure that the power plug is disconnected before cleaning the product.
Failing to do so, may cause electric shock or fire.
Keep the product away from places exposed to oil, smoke or moisture; do not
install inside a vehicle.
This may cause a malfunction, electric shock or fire.
In particular, avoid operating the monitor near water or outdoors where it could be
exposed to snow or rain.
Do not install the product near any heating appliance.
There is a risk of fire.
|
Safety Symbols
Power
| Installation |
Using and
Cleaning
Installation
When installing the product on a cabinet or shelf, do not let the front end of the
product project beyond its front edge.
Failing to do so, may cause the product to fall, resulting in a product malfunction or
personal injury.
Do not place the power cord near a heater, as the power cord may melt, causing
electric shock or fire.
Do not install the product in a car or a location exposed to oil, smoke, moisture,
water, or rainwater.
Any contact of these materials with the product may cause electric shock or fire.
Disconnect the power plug when there is thunder or lightning.
Failing to do so, may cause electric shock or fire.
Place the product down gently when installing it.
Failing to do so may cause product damage or personal injury.
Avoid dropping the product when moving, as this may cause product damage or
personal injury.
Do not install the product in a location easily reached by children.
As the product may fall and cause personal injury.
|
Safety Symbols
Power
| Installation |
Using and
Cleaning
Using and Cleaning
Do not insert any metal objects such as forks, wire, or gimlets, or flammable items
such as paper or matches into the ports at the back of the product, as this may
cause electric shock or fire.
If water or any foreign substance enters the product, make sure to turn the product
off disconnect the power plug from the outlet, and contact a service center.
Never disassemble, repair, or modify the product yourself.
If you need to repair your product, contact a service center. An attempt at repairing
this product may cause electric shock or fire.
If you hear a strange sound, smell anything burning, or see smoke, disconnect the
power plug immediately and contact a service center.
Failing to disconnect the power plug may cause electric shock or fire.
Always remove dust and water from the pins and connections of the power plug.
Failing to do so may cause electric shock or fire.
When cleaning the product, first disconnect the power plug and clean it with a soft,
dry cloth.
Do not use any chemicals such as benzene, alcohol, thinners, mosquito repellant,
aromatic, lubricant, detergent or wax.
When not using the product for a long time, make sure to disconnect the power plug.
Heavy accumulated dust may cause electric shock or fire.
If the product needs to be installed in a location that doesn't satisfy general
conditions, make sure to contact one of our service engineers about the installation
as the product may encounter serious quality problems due to its environment.
This refers to locations exposed to conditions such as heavy fine dust, chemicals, high or
low temperature, moisture, or when the product needs to be used continually without a
break over a long time.
If the product has been dropped or the product casing is damaged, turn it off and
disconnect the power plug.
Using the product without verifying that it has not been damaged may cause electric
shock or fire. Please contact a service center.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment) - Europe only
(Applicable in the European Union and other European countries with separate
collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed
with other household waste at the end of its working life. To prevent possible harm to the
environment or damage to health from uncontrolled waste disposal, please separate this from
other types of waste and recycle it responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take this item for
environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial wastes for
disposal.
| Features
| Components |
Front
Back
Side
(Buttons)
Features
Expand the memory capacity with a memory card. Enjoy stored images immediately.
By connecting a SD or MMC/MS/XD memory card of your digital camera to your digital photo frame, you can enjoy
images quickly and easily. This also provides a way to expand the memory capacity of the frame.
Stylish design
With its sleek and clean, high class design, your digital photo frame doubles as an ornament for your desk or table.
A 90 degree rotating stand allows both horizontal and vertical installation.
| Features
| Components |
Front
Back
Side
(Buttons)
Please check that all components are contained in the delivered package.
If anything is omitted, contact the local distributor where the product was purchased. For optional items, contact a service center.
Never use a power adapter other than the adapter provided with the product.
Components
Digital Photo Frame
(Colors may differ for each product.)
Manual
Quick Start
Warranty
User Manual
(Not available in all locations)
Cables
Power cord
USB cable
Power Adapter
(A-B type)
| Features
| Components |
Front
Back
| Features
| Components |
Front
Back
Side
(Buttons)
Front
Back
Side
(Buttons)
The Kensington lock is a device used to physically secure the system when using it in a
public place. (The locking device has to be purchased separately.)
Kensington lock
For using a locking device, please contact where you purchased it.
Connect a PC or an external device using a USB cable.
USB connection
Down stream
Connect your digital photo frame to a USB-supporting storage
Up stream
Connect your digital photo frame to a PC's USB port with a
port
device with a USB cable.
USB cable.
Make sure to use the USB cable (A-B type) provided with the product when
connecting your digital photo frame to a PC through the upstream port.
Connect your headphones to the Headphone connection jack.
Headphone
connection jack
Connect the power adapter to this jack.
DC –In Jack
Connect the power cord to the power jack of the power adapter.
Stand
A 45, 90 degree rotating stand allows both horizontal and vertical installations. If your
digital photo frame is installed vertically, you can rotate your photos using the rotation
function to fit to the vertical installation.
Memory Card Slot
Allows you to insert an optional memory card.
(Only applicable for SD/MMC/MS/XD card)
Sliding Prevention
Supports the product so that it stays firmly in place on slippery surfaces.
Holder
Speaker
You can listen to music files and movies.
| Features
Side (Buttons)
| Components |
Front
Back
Side
(Buttons)
[
] Power Button
Turns the product on or off.
Hold down the power button at the right of the product for about 2 seconds.
Power Indicator
Shows the power status. When the product is powered on, the power light turns
on.
[MENU] Menu Button
Displays the menu window at the bottom left corner of the screen.
[VOL +] Volume Button
Adjusts the sound volume when playing music files or movies.
] Up Button
Used for moving up.
[ ] Left Button
Used for moving left.
[ ] Right Button
Used for moving right.
[VOL +] Volume Button
Adjusts the sound volume when playing music files or movies.
Used for moving down.
] Down Button
[ENTER(
)] Enter Button
[ ▶ll ] Play / Pause
Used for selection.
Play / Pause during playback.
Button
[BACK] Back Button
Return to the previous menu.
|
Power
USB
Memory Card
USB
Memory Card
Connecting the Power
Connect the power adapter to the
terminal at the back of the product.
Connect the power cord to the power adapter.
Plug the power cord for the product into a nearby outlet.
Press the
button on the side of the product to turn the product on.
Connecting via USB
Power
Down Stream
Used to connect an external USB-supporting device to your digital photo frame.
Port
This product does not support USB card readers. Only USB storage is supported.
The external devices connected to your Digital Photo Frame are not recognized by your PC.
When connecting an external device to the down stream port, use the USB cable provided with the
external device.
Samsung carries no liability for external device malfunctions caused by using any cable except the
standard cables specified for each device.
Some external products provide a cable that does not meet USB standards. Hence, they may cause a
malfunction.
If an external storage device does not work normally when connected to your digital photo frame, try
to connect it to your PC. If it still does not work normally when connected to your PC, contact a
service center for that external device or your PC.
Up Stream Port
Used to connect your digital photo frame to a PC.
When connecting your digital photo frame to a PC through the up stream terminal, make sure to use
the USB cable provided with the product.
Connect to the upstream jack of your digital photo frame.
Connect the USB terminal of your PC.
Folder Structure
When connecting this product to your PC, it is displayed as a removable disk (E:), as shown in the figure below.
You can save and play all music and movie files in the following folders.
You can also add and delete folders as required. (However, if you delete the following default folders, they are automatically
created when your product is turned on again.)
images
A default folder created by the product
(The full path displayed in the Digital Photo Frame: Photos /
frame memory / images)
Favorites
Mainly stores photos.
Recent
Temporarily stores the last displayed photo.
imagecashe
Stores as many Web Photos (photos from the Windows Live or
RSS) to the cache as were used in the images folder.
If you copy your photos from your PC to the imagecashe, they
are invisible and cannot be viewed with your Digital Photo
Frame.
The capacity of this product is 64 MB.
If the capacity is exceeded, no further files can be stored.
Do not turn off the product while saving, playing, or deleting a file.
The volume name of the removable disk (for example, E:, F:, G:) may differ
depending on your computer environment.
Power
USB
Memory Card
Connecting a Memory Card
SD/MMC/MS/XD CARD
Slide the card in the direction marked on the top of the card.
Removing the memory card while playing MP3s, movies, or photos, may
cause the product to operate abnormally. In this case, turn the product off
and on.
|
Buttons
| Photos, Web Photos |
Music
Video
Settings
Settings
Buttons
Control Buttons
Button
Description
Turns the product on or off.
Hold down the power button on the side of the product for about 2 seconds.
MENU
Opens the on-screen menu and exits from the menu.
VOL +, VOL -
Push the button to adjust volume.
These buttons allow you to adjust items in the menu.
∧,∨,＜,＞
ENTER
Activates a highlighted menu item.
BACK
Buttons
Use this button to step one step back in the menu.
| Photos, Web Photos |
Music
Video
Photos / Web photos
List Menu (Only Photos)
When pressing the MENU button, the on-screen menu is displayed on the screen.
Sub OSD
Upper OSD
Description
Memory Card, USB, Frame Memory(:default value)
Show Pictures From
Select a connected storage media.
You can only select an external device which is currently connected.
Thumbnail List Menu
When pressing the MENU button, the on-screen menu is displayed on the screen.
Sub OSD
Upper OSD
Start Slide Show
Copy
Description
Start Slide Show
Copy File, Copy All Files
You can copy the selected file to other connected storage devices.
Delete
Yes, No
Delete the file. (This is enabled when Photos is selected.)
Allows you to view a list of other photos which have a relationship to the selected image, for example,
Show Related Photos
other photos with a similar date to it.
-. You can only use images shared by Windows Media Player on your PC while your digital photo frame
is connected to it.
Set as Background
Sets the currently selected image as the Home Background for the main screen.
At this time, the Home Background in the Settings menu is automatically set to Custom.
On, Off, Setting
Background Music
Set the Background Music to On by pressing the Menu button. Then set the Background Music to
Setting by pressing the Menu button again and selecting the music you want from among the music
files saved on the Frame Memory or the connected external memory.
Slideshow Menu
Upper OSD
Pause Slide Show/
Resume Slide Show
Sub OSD
Detail OSD
Description
Pause Slide Show/Resume Slide Show
Transition
Fade, Wipe, Slide, Blind, Checker, Random, None
Select an effect for your slide show when transitioning between images.
Interval
Slide Show Settings
5 Seconds, 10 Seconds, 20 Seconds
Controls the time intervals between image files for a slide show.
Repeat
On, Off
Select the Repeat for displaying images.
Shuffle
On, Off
Select whether to playback the files sequentially or in shuffle mode.
Allows you to view a list of other photos which have a relationship to the selected image, for example,
Show Related Photos
other photos with a similar date to it.
-. You can only use images shared by Windows Media Player on your PC while your digital photo frame is
connected to it.
Brightness
0~100
Adjust the brightness from 0 to 100.
Rotate
Original, 90°, 180°, 270°
You can rotate an image 90°, 180°, or 270°. You can also keep the image as is by selecting Original.
While a slide show is in progress, stars (★) are displayed according to the grade set by Windows Media
Rate Photos
Player.
-. You can only use images shared by Windows Media Player on your PC while your digital photo frame is
connected to it.
Photo Aspect
Original, Auto Fit, Fit To Width, Fit To Screen
Select an aspect ratio for images to display.
Set as Background
Sets the image being displayed in the slide show as the Home Background for the main screen.
On, Off, Setting
Background Music
You can specify the background music for your slide shows.
Select On and move to Settings. Then select the music you want to play.
You can adjust the volume using the ∧∨ buttons to the right of your digital photo frame.
Direct Functions (Slide Show)
Button
Description
Play the next file in the list.
Play the previous file in the list.
▶ ll
Pressing the ▶ ll button alternately plays and pauses the file.
MENU
Buttons
Opens the on-screen menu and exits from the menu.
| Photos, Web Photos |
Music
Video
Music
List Menu
When pressing the MENU button, the on-screen menu is displayed on the screen.
Sub OSD
Upper OSD
Description
Memory Card, USB, Frame Memory(:default value)
Music Source
Select a connected media storage device.
You can only select an external device which is currently connected.
Playback Mode
Once, Repeat, Repeat Once, Shuffle
Select to playback music files either Once, repeatedly or randomly.
Copy
Copy File, Copy All Files
Settings
You can copy the selected file to other connected storage devices.
Delete
Delete the file.
Play Menu
When pressing the MENU button, the on-screen menu is displayed on the screen.
Sub OSD
Upper OSD
Playback Mode
Description
Once, Repeat, Repeat Once, Shuffle
Select to playback music files either Once, repeatedly or randomly.
0~100
Brightness
Adjust the brightness from 0 to 100.
Direct Functions
＞
Plays the previous.
∧,∨
Adjusts the volume.
▶ll
MENU
Plays the next file.
＜
Buttons
Plays and Pauses a file.
Displays the menu.
Exits the menu.
| Photos, Web Photos |
Music
Video
Settings
Video
List Menu
When pressing the MENU button, the on-screen menu is displayed on the screen.
Upper OSD
Video Source
Sub OSD
Description
Memory Card, USB, Frame Memory(:default value)
Select a connected media storage device. You can only select an external device which is currently
connected.
Playback Mode
Once, Continuous
You can playback movie files either Once or Continuously.
Copy File, Copy All Files
Copy
You can copy the selected file to other connected storage devices.
Delete
Delete the file.
Play Menu
When pressing the MENU button, the on-screen menu is displayed on the screen.
Sub OSD
Upper OSD
Playback Mode
Description
Once, Continuous
Select a mode among Once, Continuous.
0~100
Brightness
Adjust the brightness from 0 to 100.
Direct Functions
＞
Play the next file.
＜
Play the previous.
∧,∨
▶ll
MENU
Buttons
Adjust volume.
Plays and Pauses a file.
Displays the menu.
Exits the menu.
| Photos, Web Photos |
Settings
Set the Settings
Music
Video
Settings
Sub OSD
Upper OSD
Default Computer
Description
By using the wireless LAN connection search function, you can reset the current connection and reselect the computer from which you are receiving photos.
English, Deutsch, Español, Français, Italiano, Português, Русский, Türkçe, 简体中文, 繁體中文,
Language
한국어
Select a language to use for your product.
Time Zone
You can select the Time Zone that you are in. Select a Time Zone.
On, Off
Daylight Saving Time
Selects whether to apply DST (Daylight Saving Time) depending on the Time Zone and Summer
Time.
Month, Day, Year, Hour, Minute, am/pm
Date and Time
Enter and set Month, Day, Year, Hour, Minute or am/pm. Whenever the power plug is disconnected,
the Date and Time information is lost. Therefore, you need to reset them each time
Alarm
Activation, Hour, Minute, am/pm, Repeat, Sound, Volume
You can set alarms.
Activation, Hour, Minute, am/pm
Your product will turn on at the specified time automatically.
Your product will turn off at the specified time automatically.
Auto Picture On/Off
If the screen was turned off at the Off Time, it turns on again when a key other than the Power key is
pressed.
When your Photo Frame is connected to your PC as a Mass-Storage device using a Mini-Monitor
or USB cable, the screen will not be turned off even at the Off Time.
OSD Color Theme
Violet Style, Blue Style, Green Style, Orange Style
You can select a color theme for the OSD background.
Home Background
Default, Custom
You can reset the Home Background of the main menu to the default image.
12 hours, 24 hours
Time Format
You can select whether to display the time in the 12 or 24 hour mode.
In 24 hours, am and pm will not be displayed.
Starting Mode
Home Menu, Last Mode
You can select the menu which is displayed when your Digital Photo Frame starts.
Auto, Manual, Update Time Now
Internet Time Update
Select whether to set the time information which is received through the Internet as the system time
for your Digital Photo Frame.
1 Minute, 3 Minutes, 5 Minutes
Timeout
Select the time for the screensaver to start.
However, if no button is operated for one minute, the screensaver starts, regardless of the Timeout
Settings on the Main menu.
Button Sound
On, Off
You can turn the sound of the operation buttons on or off.
Brightness
0~100
Adjust the brightness from 0 to 100.
Wireless Network (SSID)
Wireless Network Code
Displays a list of available SSIDs when an access point exists in your vicinity.
Displays the password required if the access point has a security setting.
Managment Web Address Displays the webpage address to connect to Samsung Photo Frame Web Configuration.
Managment Password
Proxy Server
Proxy Required
Displays the password required to connect to Samsung Photo Frame Web Configuration.
Enables case-sensitive mode.
Displays the address of the currently configured proxy server.
You can change it under the Settings section of the Samsung Photo Frame Web Configuration.
Yes, No
You can specify whether to use a proxy server.
Firmware Update
Update the product using external memory(SD/MMC/MS/XD,USB).
Please visit www.samsung.com for the latest firmware update.
Yes, No
Reset Settings
Reverts the product Settings to factory defaults.
Model, Firmware Version, Copyright
Product Information
View the product information.
Management Web
Go to [Settings]-[Management Web Address] in your Photo Frame and then open this URL using Internet Explorer on your
PC.
When connected, the Welcome page will be displayed. Enter the Password which you can see in the [Settings][Management Password] of your Photo Frame in the [Password] box on the Welcome page, and click the [sign in] button.
Sub Menu
Upper Menu
Description
Password
Welcome
Enter the password displayed in Management Password.
Enables case-sensitive mode.
Now Playing
Photo Frame
You can monitor the photos which are being displayed in the slide show at the same time.
Photo Feeds, Photos Windows Live Spaces
Web Photos
You can add or remove a website address from which you can receive photos.
Photo Feeds, Photos Windows Live Spaces
Storage
You can check the size of the photos in the addresses listed in Web Photos.
Basic, Administrator Password, Date and Time, Network Settings
Settings
You can enter and change the product name, administrator password, time, and network proxy server,
etc.
Help
Displays the help section for using Samsung Photo Frame Web Configuration.
Initial Settings
Installation Program Guide and User Recommendations
Settings for Sharing Photos on your PC - Configuring Your Windows
Settings for Sharing Photos on your PC - Configuring Your Photo Frame
Viewing the Photos from Windows Live Space
Viewing the Photos via RSS
Setting up Rating and Tags (VISTA:Tags, XP:Labels) on a PC
I want to update firmware.
Initial Settings
To use the wireless sharing function provided with this product, Windows Vista must be running on your computer and a wireless
LAN access point (AP) must be in your vicinity. (For Windows XP users, Windows Media Player 11 is required and must be installed
on your PC.)
1. Choose Your Language
Turn on your Digital Photo Frame and select a language. The selected
language is used as the OSD language and for the “Samsung Photo
Frame Web Confi guration” which is embedded in your Digital Photo
Frame. You can change the language via Settings -> Language.
2. Choose Your WiFi Network
A list of APs is displayed. (If there are no APs displayed, click “Refresh
Networks” to update the list.)
Select an AP to connect to and the connection state is displayed in a
popup window and the “Choose Computer” screen will appear.
3. Choose Computer
A list of PCs is displayed. (If there are no PCs displayed, click “Refresh
List” to update the list.) Select a PC to connect to and the Main screen
will appear.
Ensure that the settings are confi gured as shown below.
Otherwise, your PC may not be displayed in the list or you may not be able to connect to it.
In Vista, select Control Panel > Network and Sharing Center > Customize. Check whether the Location type is set to Private. Select
Digital Photo Frame from the Windows Media Player > Library > Media Sharing list. Check whether it is set to Allow.
Installation Program Guide and User Recommendations
Windows XP
We highly recommend installing .Net Framework 3.0.
Click on the "Frame Manager" icon in the Manual - Main screen to run the installation file.
Installing Frame Manager
Windows Media Player 11 or later must be installed.
Digital Image Library Starter Edition (DISE)
: This program allows you to change the ratings for the photos on your Digital Photo Frame via
your PC.
Recommendations when using the Digital Photo Frame: Internet Explorer 7.0 or higher
Windows Vista
Click on the "Frame Manager" icon in the Manual - Main screen to run the installation file.
Installing Frame Manager
Frame Manager
Frame Manager is a program needed to use Samsung Photo Frame Web Configuration.
You can find the installed Frame Manager in C:/Program Files/Samsung/Frame Manager.
To run Frame Manager, click Start and point to Programs, and then click Frame Manager > Frame Manager.
Settings for Sharing the Photos on your PC - Configuring Your Windows Vista
Adding Photos to the Library
Run Windows Media Player.
Click the [Library] tab at the top.
Click [Add To Library] in the [Library] tab.
In the [Add To Library] window, select [My
personal folders] under the [Select the folders to
monitor] section and select the folder containing
photos and click [Add].
Select the folder to share and click [OK] to add
it.
When you click [OK], the [Add To Library]
window is closed and the [Add to Library by
Searching Computer] is displayed. Wait until it
finishes the operation and click [Close] when it is
completed.
Checking Shared Photos
In the Windows Media Player, set the Category,
which is under the [
to [Picture].
] symbol at the top left,
In the [Library], select Recently added, All
Pictures, Keywords, Date Taken, Rating, or Folder
settings and check whether the added photos
exist in the library.
Sharing Settings for Accepting Connections from Your Photo Frame
In the [Library] tab, click on [Media Sharing].
In the [Media Sharing] window, check the [Share
my media] checkbox under [Sharing settings].
If no [Available device] is displayed in the [Media
Sharing] window, proceed to steps 4. If
displayed, proceed to step 5.
In the [Media Sharing] window, click
[Networking] and check whether the current
network is set to [Private network]. If not, set it
to [Private Network].
If your network is a Private network, the
[Available Device] list and the [Settings] button
are displayed in the [Media Sharing] window.
In the [Media Sharing] window, click [Settings].
The [Media Sharing-Default Settings] window is
displayed.
In the [Media Sharing-Default Settings] window,
set the [Media Type] to [Picture], both [Star
ratings] and [Parental ratings] to [All ratings] or
a required rating under the [Default Settings]
section. If you want to add a device or computer
which tries to connect to the library to the list
automatically, check the [Add new devices and
computers automatically] checkbox.
Only photos can be transmitted via PC sharing.
Settings for Sharing the Photos on Your PC - Configuring Your Photo Frame
Checking Network Connections
Check whether the Network icon is displayed at the
left top of the Main screen.
If the Network icon is displayed, proceed to the
Checking Computer Connections section
described below. If it is not displayed, move to
[Settings]-[Wireless Network(SSID)].
SSID : Service Set Identifier
In the [Wireless Network(SSID)] window, select the
SSID to which you want to connect your Digital Photo
Frame to. If no available SSID is displayed, click
[Refresh Networks] to update the list.
If you select this when the SSID is encrypted, a
password input window is displayed. You can only be
connected to the network if you enter the correct
password.
If the "Connected" message is displayed, it means
that your Digital Photo Frame is connected to the
network.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2007:12:28 17:57:04+08:00
Create Date                     : 2007:12:28 17:56:36+08:00
Title                           : file://E:\pdf\549F-04\manual\eng\01_htm\Index.htm
Author                          : master
Creator                         : PScript5.dll Version 5.2
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Page Count                      : 25
Mod Date                        : 2007:12:28 17:57:04+08:00
Creation Date                   : 2007:12:28 17:56:36+08:00
Metadata Date                   : 2007:12:28 17:57:04+08:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools